Range of deck mounted spout outlets incorporating chrome plated brass body (model F2158.WR) or a stainless-steel body (model F2943INOX.WR). The outlets incorporate a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2206011

Note:

R009 only applies to model F2943INOX.WR

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½" captive nut end connections (model F2158.WR) Stainless-steel braided TPSiV lined flexible hose assemblies incorporating ½” captive nut end connections (model F2943INOX.WR)

Marking:

Fima on base plate

Installation Requirements:

R001 R006 R009

Expiry date:

30/06/2027

Model:

F2158.WR F2943INOX.WR

Product Images

Approval Holder:

Fima Carlo Frattini

Company Name

Fima Carlo Frattini

Postcode

28010

Country

Italy

Phone

0039 0322 9549

General Email

Daniela.sgarbossa@fimacf.com

View All Listings by this Company

Manufacturer:

Fima Carlo Frattini

Company Name

Fima Carlo Frattini

Postcode

28010

Country

Italy

Phone

0039 0322 9549

General Email

Daniela.sgarbossa@fimacf.com

View All Listings by this Company

Wall mounted spout with a brass body (chrome plated). The spout outlet incorporates a TPE gasket. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2206309

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Gessi on steel back plate

Installation Requirements:

R001 R040

Expiry date:

30/06/2027

Model:

20293

Product Images

Approval Holder:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi Hamlet Vintebbio Serravalle Sesia

Postcode

13037

Country

Italy

Phone

+39 0163 454111

General Email

pfornara@gessi.it

View All Listings by this Company

Manufacturer:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi Hamlet Vintebbio Serravalle Sesia

Postcode

13037

Country

Italy

Phone

+39 0163 454111

General Email

pfornara@gessi.it

View All Listings by this Company

Range of horizontal or vertical expansion vessels with an EPDM membrane. Maximum working pressure 10.0 or 16.0 bar (please refer to model). Maximum operating temperature 100°C.

Section:

1000 Expansion Vessels

Size:

1” BSP (M), 1½” BSP (M) & 2” BSP (M).

Marking:

Zilio Industries Spa, AQUASYSTEM, model, max temp, max pressure CE and other technical information on label on body

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

Vertical models = maximum working pressure 10.0 bar: VA35 VAV50 VAV60 VAV80 VAV100 VAV150 VAV200 VAV300 VAV500 VAV750 VAV1000 AR35 Horizontal models = maximum working pressure 10.0 bar: VAO35 VAO50, VAO60, VAO80 VAO100, VAO150, VAO200 VAO300 Vertical models = maximum working pressure 16.0 bar: VB35 VBV50 VBV60 VBV80 VBV100 VBV150 VBV200 VBV300

Product Images

Approval Holder:

Zilio Industries SPA

Company Name

Zilio Industries SPA

Address

Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)

Country

Italy

Phone

[+39] 049 59 57 552

General Email

info@zilioindustries.com

View All Listings by this Company

Filling loop assemblies comprising of a stainless steel braided, EPDM lined hose, double check valve assembly with isolation valve verified by test (suitable for backflow protection against fluid category 3) and either a straight or tee isolation valve. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.

Section:

1015 Filling Loop

Size:

15mm compression inlet/outlet

Marking:

WRAS, date of manufacture (YYYY) and Valtech on crimp connection of hose. CR and flow arrow on double check valve assembly.

Installation Requirements:

R001

Expiry date:

31/03/2027

Model:

FH-SS-06-01 (STRAIGHT ISOLATION VALVE) & FH-SS-06-02 (TEE ISOLATION VALVE) FILLING LOOP ASSEMBLIES

Approval Holder:

Ningbo Valtech Flow Control Co. Ltd.

Company Name

Ningbo Valtech Flow Control Co. Ltd.

Address

Room 610 New Oriental Times Building No.1130

Country

Baizhang East Road

Phone

0574-88001556

View All Listings by this Company

Range of tap outlets with plastic bodies incorporating a filter within the body, incorporating a hollow fibre filter membrane. The inlet of the filter incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The filters are supplied with (and must be used with) a chrome plated brass adapter which incorporates a pastic flow regulator. Maximum operating temperature 60°C.

Section:

1050 Filters and Housings

WRAS Approval Number:

2206333

Note:

Open outlet use only.

Size:

90-001861: M22 (M) 90-001862: M22 (F)

Marking:

T-Safe (brand of Johs. Tandrup A/S) on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2027

Model:

02-831401 Medical Tap Filter Fixed Position 31 Day. 02-831402 Medical Tap Filter Fixed Position 31 Day, Sterile. 02-831403 Medical Tap Filter Fixed Position 62 Day. 02-831404 Medical Tap Filter Fixed Position 62 Day, Sterile. 02-831405 Medical Tap Filter Fixed Position 92 Day. 02-831406 Medical Tap Filter Fixed Position 92 Day, Sterile. Filters are to be installed with 90-001861 Fixed Position Tap Adapter, Gasket seal & 90-001862 Fixed Position Tap Adapter, O-ring seal.

Product Images

Approval Holder:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Manufacturer:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Wavin range of Tigris K1 (plastic bodies) and M1 (brass bodies) press-fit fittings for use with Tigris PEX/AL/PE HD (50mm & 63mm) and Tigris PERT/AL/PERT WT (75mm) barrier pipes. Maximum working pressure 6.0 bar. Maximum operating temperature 95°C.

Section:

1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer

Section Subtitle:

Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.

WRAS Approval Number:

2206029

Size:

Please refer to model.

Marking:

Pipes: Wavin, size, date of manufacture, EN ISO 21003 WRAS Tmax = 95°C/6Bar Fittings: Wavin & size on the crimp sleeve PPSU, W & size on the body

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

Pipe: 3004372 Tigris PEX AL PE HD Pipe Barrier Pipe 3028271 Tigris PEX AL PE HD Barrier Pipe 3053971 Tigris PERT AL PE HD Barrier Pipe - from July 2022 this pipe will be known as 3053972 Tigris PERT AL PERT WT barrier pipe. Fittings Tigris K1 range: 3027832 Coupler 50mm x 50mm 3027847 Coupler 63mm x 63mm 3065639 Coupler 75mm x 75mm 3024667 Elbow 90° 50mm x 50mm 3027848 Elbow 90° 63mm x 63mm 3065643 Elbow 90° 75mm x 75mm 3027829 Tee- 50mm 3027853 Tee-63mm 3065644 Tee-75mm 3024668 Elbow 45° 50mm 3027849 Elbow 45° 63mm 3065642 Elbow 45° 75mm 3027830 Tee- Reduced 50mm x 25mm x 50mm 3027842 Tee-Reduced 50mm x 32mm x 50mm 3027831 Tee- Reduced 50mm x 40mm x 50mm 3027854 Tee-Reduced 63mm x 40mm x 63mm 3027855 Tee-Reduced 63mm x 32mm x 63mm 3027856 Tee-Reduced 63mm x 25mm x 50mm 3065645 Tee-Reduced 75mm x 50mm x 75mm 3065646 Tee-Reduced 75mm x 40mm x 75mm 3065647 Tee-Reduced 75mm x 32mm x 75mm 3027833 Coupler Reduced 50mm x 32mm 3027834 Coupler Reduced 50mm x 40mm 3027850 Coupler Reduced 63mm x 50mm 3027852 Coupler Reduced 63mm x 40mm 3065640 Coupler reduced 75mm x 63mm 3065641 Coupler reduced 75mm x 50mm 3027837 Connector (M) 50mm x 1 1/2" BSP Fittings Tigris M1 range: 4032698 Connector (F) 50mm x 1 1/2" BSP 4032699 Connector (F) 63mm x 2" BSP 4049179 Connector (F) 75mm x 2 1/2" BSP 4032567 Elbow 90° 50mm 4032568 Elbow 90° 63mm 4049172 Elbow 90° 75mm 4032658 Coupler 50mm 4032659 Coupler 63mm 4049168 Coupler 75mm 4032684 Connector (M) 50mm x 1 1/2" BSP 4032685 Connector (M) 63mm x 2" BSP 4049178 Connector (M) 75mm x 2 1/2" BSP

Product Images

Approval Holder:

Wavin Ltd.

Company Name

Wavin Ltd.

Address

Edlington Lane, Edlington Doncaster

Postcode

DN12 1BY

Country

United Kingdom

Phone

01709 856300

View All Listings by this Company

Manufacturer:

Wavin Ltd.

Company Name

Wavin Ltd.

Address

Edlington Lane, Edlington Doncaster

Postcode

DN12 1BY

Country

United Kingdom

Phone

01709 856300

View All Listings by this Company

Range of solder ring copper fittings for use with copper tube to EN 1057. The HLSRDPMFWT and HLSRDPMFZT models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208803

Size:

Solder ring: 8mm-54mm and ½” - 1” (see model). Threaded connections: 1” captive nut (see model).

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

HLSR11ECC-a Elbow 90 degree C X C: 8mm-54mm. HLSR11ECC-b Street Elbow 90 degree Ftg X C: 8mm-54mm. HLSR11ECC-c Street Elbow 45 degree Ftg X C: 8mm-54mm. HLSR11ECC-d Street Elbow 45 degree Long Turn Ftg X C: 8mm-54mm. HLSR11ECC-e Elbow 45 degree C X C: 8mm-54mm. HLSR11ECC-f Elbow 45 degree Long Turn C X C: 8mm-54mm. HLSR11ECC-g Street Elbow 90 degree Long Turn Ftg X C: 8mm-54mm. HLSR11ECC-h Elbow 90 degree Long Turn C X C: 8mm-54mm. HLSR20CC-a Slip Straight Coupling C X C: 8mm-54mm. HLSR20CC-b Straight Coupling with dot C X C: 8mm-54mm. HLSR20CC-c Straight Coupling with groove C X C: 8mm-54mm. HLSR21RCC-a Fitting Reducer Ftg X C: 8mm-54mm. HLSR21RCC-b Reducing Coupler C X C: 8mm-54mm and ½”-1”. HLSR30TCC Equal TEE CxCxC: 8mm-54mm. HLSR31TRC Reducing Tee CxCxC: 8mm-54mm. HLSR40CAP Cap: 8mm-54mm. HLSRBGQW Partial Crossover Ftg x C: 12mm-28mm. HLSRGQW Full Crossover C x C: 12mm-28mm. HLSRYJWT Reducing Elbow 90 degree C X C: 15mm-54mm. HLSRZDWT BENT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. HLSRZDZT STRAIGHT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. HLSRDPMFWT Bent Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut. HLSRDPMFZT Straight Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut.

Approval Holder:

Zhejiang Hailiang Co Ltd

Company Name

Zhejiang Hailiang Co Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

The 3G Metric Imperial range of plastic compression fittings with polypropylene bodies, compression nut and silicone seal for use with PE80 pipe (manufactured to BS EN 12201). Maximum working pressure: Fittings when used with PE100 pipe = 16.0 bar. Fittings when used with PE80 pipe = 12.0 bar. For above and below ground and cold water use only.

Section:

1160 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206349

Size:

see model

Marking:

Philmac and size on nut

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

3G Metric Imperial Range: Wall Plate Elbow models: 98902200 20mm(½”) x ½” 98903100 25mm(¾”) x ½” 98903200 25mm(¾”) x ¾” End Cap models: 98902900 20(½") 98903900 25(¾") 98904900 32(1") 98905900 40(1¼") 98906900 50(1½") 98907900 63(2") Elbow models: 98902800 45˚ 20(½") 98903800 45˚ 25(¾") 98904800 45˚ 32(1") 98905800 45˚ 40(1¼") 98906800 45˚ 50(1½") 98907800 45˚ 63(2") 98952200 20(½") x 20(½") 98953300 25(¾") x 25(¾") 98954400 32(1") x 32(1") 98955500 40(1¼") x 40(1¼") 98956600 50(1½") x 50(1½") 98957700 63(2") x 63(2") 98962100 20(½") x ½" FI BSP 98962200 20(½") x ¾" FI BSP 98963100 25(¾") x ½" FI BSP 98963200 25(¾") x ¾" FI BSP 98963300 25(¾") x 1" FI BSP 98964300 32(1") x 1" FI BSP 98964400 32(1") x 1¼" FI BSP 98965400 40(1¼") x 1¼" FI BSP 98965500 40(1¼") x 1½" FI BSP 98966500 50(1½") x 1½" FI BSP 98966600 50(1½") x 2" FI BSP 98967600 63(2") x 2" FI BSP 98973200 25(¾") x ¾" MI BSP 98974300 32(1") x 1" MI BSP Joiner/Coupler models: 98912200 20(½") x 20(½") 98913300 25(¾") x 25(¾") 98914400 32(1") x 32(1") 98915500 40(1¼") x 40(1¼") 98916600 50(1½") x 50(1½") 98917700 63(2") x 63(2") Reducing Joiner/Coupler models: 98913200 25(¾") x 20(½") 98914200 32(1") x 20(½") 98914300 32(1") x 25(¾") 98915300 40(1¼") x 25(¾") 98915400 40(1¼") x 32(1") 98916300 50(1½") x 25(¾") 98916400 50(1½") x 32(1") 98916500 50(1½") x 40(1¼") 98917400 63(2") x 32(1") 98917500 63(2") x 40(1¼") 98917600 63(2") x 50(1½") End Connector models: 98922100 20(½") x ½" MI BSP 98922200 20(½") x ¾" MI BSP 98922300 20(½") x 1" MI BSP 98923100 25(¾") x ½" MI BSP 98923200 25(¾") x ¾" MI BSP 98923300 25(¾") x 1" MI BSP 98924200 32(1") x ¾" MI BSP 98924300 32(1") x 1" MI BSP 98924400 32(1") x 1¼" MI BSP 98924500 32(1") x 1½" MI BSP 98925300 40(1¼") x 1" MI BSP 98925400 40(1¼") x 1¼" MI BSP 98925500 40(1¼") x 1½" MI BSP 98925600 40(1¼") x 2" MI BSP 98926500 50(1½") x 1½" MI BSP 98926600 50(1½") x 2" MI BSP 98927500 63(2") x 1½" MI BSP 98927600 63(2") x 2" MI BSP 98982100 20(½") x ½" FI BSP 98982200 20(½") x ¾" FI BSP 98982300 20(½") x 1" FI BSP 98983100 25(¾") x ½" FI BSP 98983200 25(¾") x ¾" FI BSP 98983300 25(¾") x 1" FI BSP 98984200 32(1") x ¾" FI BSP 98984300 32(1") x 1" FI BSP 98984400 32(1") x 1¼" FI BSP 98985400 40(1¼") x 1¼" FI BSP 98985500 40(1¼") x 1½" FI BSP 98986500 50(1½") x 1½" FI BSP 98986600 50(1½") x 2" FI BSP 98987500 63(2") x 1½" FI BSP 98987600 63(2") x 2" FI BSP Tee models: 98932200 20(½") x 20(½") x 20(½") 98933300 25(¾") x 25(¾") x 25(¾") 98934400 32(1") x 32(1") x 32(1") 98935500 40(1¼") x 40(1¼") x 40(1¼") 98936600 50(1½") x 50(1½") x 50(1½") 98937700 63(2") x 63(2") x 63(2") 98942100 20(½") x 20(½") x ½" FI BSP 98942200 20(½") x 20(½") x ¾" FI BSP 98943100 25(¾") x 25(¾") x ½" FI BSP 98943200 25(¾") x 25(¾") x ¾" FI BSP 98943300 25(¾") x 25(¾") x 1" FI BSP 98944100 32(1") x 32(1") x ½" FI BSP 98944200 32(1") x 32(1") x ¾" FI BSP 98944300 32(1") x 32(1") x 1" FI BSP 98944400 32(1") x 32(1") x 1½" FI BSP 98945100 40(1¼") x 40(1¼") x ½" FI BSP 98945200 40(1¼") x 40(1¼") x ¾" FI BSP 98945400 40(1¼") x 40(1¼") x 1¼" FI BSP 98945500 40(1¼") x 40(1¼") x 1½" FI BSP 98946100 50(1½") x 50(1½") x ½" FI BSP 98946200 50(1½") x 50(1½") x ¾" FI BSP 98946500 50(1½") x 50(1½") x 1½" FI BSP 98946600 50(1½") x 50(1½") x 2" FI BSP 98947600 63(2") x 63(2") x 2" FI BSP 98993100 25(¾") x 25(¾") x ½" MI BSP 98993200 25(¾") x 25(¾") x ¾" MI BSP Reducing Tee models: 98933200 25(¾") x 25(¾") x 20(½") 98933400 25(¾") x 25(¾") x 32(1") 98934300 32(1") x 32(1") x 25(¾") 98935300 40(1¼") x 40(1¼") x 25(¾") 98935400 40(1¼") x 40(1¼") x 32(1") 98936300 50(1½") x 50(1½") x 25(¾") 98936400 50(1½") x 50(1½") x 32(1") 98936500 50(1½") x 50(1½") x 40(1¼") 98937300 63(2") x 63(2") x 25(¾") 98937400 63(2") x 63(2") x 32(1") 98937600 63(2") x 63(2") x 50(1½") Reducing Elbow models: 98952300 25(¾") x20(½")

Product Images

Approval Holder:

Philmac Pty Ltd

Company Name

Philmac Pty Ltd

Address

Diplocks Way, Hailsham, East Sussex

Postcode

BN27 3JF

Phone

+44 (0) 1323 847 323 Fax: 01323 844775

General Email

philmacorders@philmac.co.uk

View All Listings by this Company

Manufacturer:

Philmac Pty Ltd

Company Name

Philmac Pty Ltd

Address

Diplocks Way, Hailsham, East Sussex

Postcode

BN27 3JF

Phone

+44 (0) 1323 847 323 Fax: 01323 844775

General Email

philmacorders@philmac.co.uk

View All Listings by this Company

Range of ‘StrengThin™’ 100 System couplings and fittings for use with stainless steel pipe (manufactured to EN 10217-7). For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206013

Size:

Please refer to model.

Marking:

Victaulic logo, model, size and technical information on body.

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

StrengThin™ 100 System Couplings and Fittings comprising of models: No. E490, 90° Elbow: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E491, 45° Elbow: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E492, Tee: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E493, Reducing Tee: DN65 x DN65 x DN50; DN80 x DN80 x DN50, DN80 x DN80 x DN65, DN100 x DN100 x DN50 DN100 x DN100 x DN65, DN100 x DN100 x DN80, DN125 x DN125 x DN65, DN125 x DN125 x DN80, DN125 x DN125 x DN100, DN150 x DN150 x DN80, DN150 x DN150 x DN100, DN150 x DN150 x DN125, DN200 x DN200 x DN100, DN200 x DN200 x DN125, DN200 x DN200 x DN150; DN250 x DN250 x DN1250, DN250 x DN250 x DN150, DN250 x DN250 x DN200; DN300 x DN300 x DN150, DN250 x DN250 x DN200 & DN250 x DN250 x DN250. No. E494, & E494G Adaptor Nipple: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E495, Concentric Reducer: DN65xDN50, DN80xDN50, DN80xDN65, DN100xDN50, DN100xDN65, CN100xDN80, DN125xDN80, DN125xDN100, DN150xDN100, D150xDN125, DN200xDN125, DN200xDN150, DN250xDN150, DN250xDN200, DN300xDN200 & DN300xDN250. No. E496, End Cap: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. Style E497, Rigid Coupling: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E498, Flange Adaptor: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. Models added April 2024: Style E155 ‘StrengThin™’ 100 system Expansion Joint: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300

Product Images

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

Country

Belgium

General Email

ed.mccarson@victaulic.com

View All Listings by this Company

Manufacturer:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

Country

Belgium

General Email

ed.mccarson@victaulic.com

View All Listings by this Company

Kuterlite K900 Pro range of compression fittings with DZR brass bodies for use with copper pipe (EN 1254) Maximum working pressure for 8mm-10mm = 70.0 bar. Maximum working pressure for 12mm – 28mm = 20.0 bar. Maximum working pressure for 35mm – 54mm = 6.0 bar. Maximum operating temperature 90°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206027

Size:

Please refer to model.

Marking:

Kuterlite PRO, Flow arrow, EN 1254-2 and size on nut. CR on body.

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

K910X: Straight Coupling 10mm to 54mm K911X: (M) Coupling 12mm to 54mm x ¼” BSP (M) to 2” BSP (M) K911PX: (M) Coupling 8mm to 54mm x ½” BSP (F) to 2” BSP (F) K911LBX: Long Tank Coupling 22mm x ¾” BSP (M) & 28mm x 1” BSP (M) K911TCX: Tank Coupling 15mm to 54mm x ½” BSP (M) to 2” BSP (M) K912X: (F) Coupling 12mm to 54mm x 3/8” BSP (F) to 2” BSP (F) K915X: Elbow 12mm to 54mm K916X: (M) Elbow 12mm to 54mm x 3/8” BSP (M) to 2” BSP (M) K916PX: (M) Elbow 15 to 28mm x ½” BSP (M) to 1” BSP (M) K916LBX: Long (M) Elbow 22mm x ¾” BSP (M) K917X: (F) Elbow 12mm to 42mm x 3/8” BSP (F) to 1.1/2” BSP (F) K917WX: (F) Wall Elbow 15mm x ½” BSP (F) & 22mm x ¾” BSP (F) K918X: Equal Tee 10mm to 54mm K918BX: Tee (Reduced) 15mm to 54mm K918EBX: Tee End & Branch 15mm to 28mm K918EEX: Tee (Both Reduced) 12mm to 22mm K920X: (M) End Tee 15mm x ½” BSP (M) x 15mm K920HX: (M) Branch Tee 15mm x 15mm x ½” BSP (M) K923X: Cross 15mm KS926X: Swivel Tap Connector 15mm x ½” BSP (M) to ¾” BSP (M) & 22mm x ¾” BSP (M) K927X: Bent Tap Connector 15mm x ½” BSP (M) & 22mm x ¾” BSP (M) K930X: (F) Branch Tee 15mm to 28mm x 15mm to 28mm x ¼” BSP (F) to 1” BSP (F) K930EX: (F) End Tee 15mm to 28mm x ½” BSP (F) to ¾” BSP (F) x 15mm to 28mm K941X (F) Adaptor 22mm x ¾” BSP (F) K947X: Reducer 8mm to 28mm K948: Reducing Set 22mm to 28mm K949: Reducing Set 35mm to 54mm KS950X: Tank Connector 15mm to 54mm K951X: Stop End 12mm to54mm K953X: Crossover 15mm K972X: Blanking Plug 15mm to 54mm K1870X: Kufit Adaptor 15mm to 22mm K915XCP: Elbow 15mm & 35mm K917WXCP: Backplate Elbow 15mm x ½” BSP (F) & 22mm x ¾” BSP (F) K918XCP: Equal Tee 15mm K918BXCP: Tee (Reduced) 15mm to 28mm K947XCP: One Piece Reducer 15mm to 22mm

Product Images

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company