Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #240403019

Range of single-hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The products are supplied with a surface mounting kit incorporating EPDM lined flexible hose assemblies with ½” captive nut and 15mm compression isolation valves that incorporate single check valve assembly (suitable for backflow protection against fluid category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:: 240403019
Size:: 15mm Compression.
Marking:: BRISTAN on body.
Installation Requirements:: R001 R006 R010
Expiry date:: 30/04/2029
Model:: RP3 SPR EFSNK GM

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

WRAS Approval Number: #241102702

Ranges of cylindrical or tubular expansion vessels with epoxy coated or uncoated steel bodies and either Butyl or EPDM membranes. Maximum working pressure of Tube models is 8.0 bar. All other models have a maximum working pressure of 10.0 bar. Maximum operating temperature 99°C.

Section:: 1000 Expansion Vessels
WRAS Approval Number:: 241102702
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.
Size:: INOX ULTRA-PRO – 1” BSP (M), TUBE – ½” BSP (M), TURBOFLEX – ½” BSP (M) inlet and outlet.
Marking:: Zilmet and product information on adhesive label on body.
Installation Requirements:: R001
Expiry date:: 30/11/2029
Model:: INOX ULTRA-PRO - 10 bar 22 (Type 24), 50, 60 and 100 litres (Horizontal and Vertical Stand). TUBE 8 bar - 4 litres. TURBOFLEX 10 bar- 4 litres MODELS ADDED NOVEMBER 2024: TUBE – 2L & 3L.

Approval Holder:: Zilmet UK Limited

Company Name
Zilmet UK Limited
Address
Airfield Industrial Estate, Hixon, Stafford
Postcode
ST18 0PF
Phone
01889 272 185
General Email
sales@zilmet.co.uk

View All Listings by this Company
Manufacturer:: Zilmet Spa

Company Name
Zilmet Spa
Address
35010 Limena (Padova) Via Del Santo 242 Italy
Phone
+ 49 8840662 Fax: + 49 767321 Telex: 430181
General Email

View All Listings by this Company

WRAS Approval Number: #240904721

Filling loop assembly, incorporating a stainless-steel braided EPDM lined flexible hose assembly, an isolation valve (DZR brass body) and a combined isolation valve and non-verifiable double check valve assembly (DZR brass body) which incorporates 2 check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1015 Filling Loop
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15mm compression
Marking:: Justlink, WRAS and year of manufacture (YYYY) on crimp connection of flexible hose. Flow arrow, CR and size on body of combined isolation valve and double check valve. Flow arrow on isolation valve
Installation Requirements:: R001
Expiry date:: 30/09/2029
Model:: JL-LTF-1

Product Images

Approval Holder:: Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road Yuhuan Economic Development Zone Yuhuan Zhejiang
Postcode
317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company
Manufacturer:: Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road Yuhuan Economic Development Zone Yuhuan Zhejiang
Postcode
317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company

WRAS Approval Number: #240904733

Section:: 1015 Filling Loop
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15mm compression
Marking:: RWC, WRAS and year of manufacture (YYYY) on crimp connection of flexible hose. Flow arrow, CR and size on body of combined isolation valve and double check valve. Flow arrow on isolation valve
Installation Requirements:: R001
Expiry date:: 30/09/2029
Model:: FIBV246208 FIBV246209

Approval Holder:: Reliance Worldwide Corporation

Company Name
Reliance Worldwide Corporation
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

WRAS Approval Number: #2303394

Range of fohn stainless steel (SUS304/316L) crimp fittings incorporating EPDM ‘O’-rings. For use with FOHN stainless steel pipes (SUS304/316L). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2303394
Size:: see model
Marking:: FOHN (brand of KONTUR EESTI OÜ), size & material on pipe and fitting body.
Installation Requirements:: R001
Expiry date:: 31/03/2028
Model:: Male threaded coupler S15х1/2"W – 15 x 15mm S15х3/4"W – 15 x 15mm S18х1/2"W – 18 x 18mm S18х3/4"W – 18 x 18mm S22х1/2"W – 22 x 22mm S22х3/4"W – 22 x 22mm S22х1"W – 22 x 22mm S28х3/4"W – 28 x 28mm S28x1"W – 28 x 28mm S35x1"W – 35 x 35mm S35x1 1/4"W – 35 x 35mm S42х1 1/2"W – 42 x 42mm S54х2"W – 54 x 54mm Male threaded coupler with straight pipe 15х1/2"W – 15 x 15mm 15x3/4"W – 15 x 15mm 18х1/2"W – 18 x 18mm 18х3/4"W – 18 x 18mm 18x1"W – 18 x 18mm 22х1/2"W – 22 x 22mm 22х3/4"W – 22 x 22mm 22x1"W – 22 x 22mm 28х3/4"W – 28 x 28MM 28х1"W – 28 x 28mm 35х1 1/4"W – 35 x 35mm 42х1 1/2"W – 42 x 42mm 54х2"W – 54 x 54mm Female threaded coupler S15х1/2"N – 15 x 15mm S18х1/2"N – 18 x 18mm S18х3/4"N – 18 x 18mm S22х1/2"N – 22 x 22mm S22х3/4"N – 22 x 22mm S28х3/4"N – 28 x 28mm S28х1"N – 28 x 28mm S35x1"N – 35 x 35mm S35x1 1/4"N – 35 x 35mm S42х1 1/2"N – 42 x 42mm S54х2"N – 54 x 54mm Female threaded coupler with straight pipe 15х1/2"N – 15 x 15mm 15x3/4"N – 15 x 15mm 18х1/2"N – 18 x 18mm 18х3/4"N – 18 x 18mm 18x1"N – 18 x 18mm 22х1/2"N – 22 x 22mm 22х3/4"N – 22 x 22mm 22x1"N – 22 x 22mm 28х3/4"N – 28 x 28mm 28х1"N – 28 x 28mm 35х1 1/4"N – 35 x 35mm 42х1 1/2"N – 42 x 42mm 54х2"N – 54 x 54mm Coupler S15 – 15 x 15mm S18х15 – 18 x 18mm S18 – 18 x 18mm S22х18 – 22 x 22mm S22х15 – 22 x 22mm S22 – 22 x 22mm S28х15 – 28 x 28mm S28х22 – 28 x 28mm S28 – 28 x 28mm S35х28 – 35 x 35mm S35 – 35 x 35mm S42х35 – 42 x 42mm S42 – 42 x 42mm S54х42 – 54 x 54mm S54 – 54 x 54mm Coupler with straight pipe S15 – 15 x 15mm S18х15 – 18 x 18mm S18 – 18 x 18mm S22х18 – 22 x 22mm S22х15 – 22 x 22mm S22 – 22 x 22mm S28х15 – 28 x 28mm S28х22 – 28 x 28mm S28 – 28 x 28mm S35х28 – 35 x 35mm S35 – 35 x 35mm S42х35 – 42 x 42mm S42 – 42 x 42mm S54х42 – 54 x 54mm S54 – 54 x 54mm Coupler with straight pipe S18х15Ⅱ – 15 x 15mm S22х15Ⅱ – 15 x 15mm S22х18Ⅱ – 18 x 18mm S28х15Ⅱ – 15 x 15mm S28х18Ⅱ – 18 x 18mm S28х22Ⅱ – 22 x 22mm S35х15Ⅱ – 15 x 15mm S35х18Ⅱ – 18 x 18mm S35х22Ⅱ – 22 x 22mm S35х28Ⅱ – 28 x 28mm S42х22Ⅱ – 22 x 22mm S42х28Ⅱ – 28 x 28mm S42х35Ⅱ – 35 x 35mm S54х28Ⅱ – 28 x 28mm S54х35Ⅱ – 35 x 35mm S54х42Ⅱ – 42 x 42mm Adjustable connector S15Ⅱ – 15 x 15mm S18Ⅱ – 18 x 18mm S22Ⅱ – 22 x 22mm S28Ⅱ – 28 x 28mm S35Ⅱ – 35 x 35mm S42Ⅱ – 42 x 42mm S54Ⅱ – 54 x 54mm Union H15х1/2" – 15 x 15mm H15х3/4" – 15 x 15mm H18х1/2" – 18 x 18mm H18х3/4" – 18 x 18mm H22х1/2" – 22 x 22mm H22х3/4" – 22 x 22mm H28х3/4" – 28 x 28mm H28х1" – 28 x 28mm H35x1" – 35 x 35mm H35x1 1/4" – 35 x 35mm H42х1 1/2" – 42 x 42mm H54х2" – 54 x 54mm Tee T15 – 15 x 15mm T18х15х18 – 18 x 18mm T18 – 18 x 18mm T22х18х22 – 22 x 22mm T22х15х22 – 22 x 22mm T22 – 22 x 22mm T28x15x28 – 28 x 28mm T28х22х22 – 28 x 28mm T28x22x28 – 28 x 28mm T28 – 28 x 28mm T35x15x35 – 35 x 35mm T35x22x35 – 35 x 35mm T35x28x35 – 35 x 35mm T35 – 35 x 35mm T42х35х42 – 42 x 42mm T42 – 42 x 42mm T54х42х54 – 54 x 54mm T54 – 54 x 54mm Female threaded Tee T15х1/2"Nx15 – 15 x 15mm T18х1/2"Nx18 – 18 x 18mm T18х3/4"Nx18 – 18 x 18mm T22х1/2"Nx22 – 22 x 22mm T22х3/4"Nx22 – 22 x 22mm T28х1/2"Nx28 – 28 x 28mm T28х3/4"Nx28 – 28 x 28mm T28х1"Nx28 – 28 x 28mm T35х1"Nx35 – 35 x 35mm T35х1 1/4"Nx35 – 35 x 35mm T42х1 1/2"Nх42 – 42 x 42mm T54х2"Nх54 – 54 x 54mm Male threaded Tee T15х1/2"Wx15 – 15 x 15mm T18х1/2"Wx18 – 18 x 18mm T18х3/4"Wx18 – 18 x 18mm T22х1/2"Wx22 – 22 x 22mm T22х3/4"Wx22 – 22 x 22mm T28х1/2"Wx28 – 28 x 28mm T28х3/4"Wx28 – 28 x 28mm T28х1"Wx28 – 28 x 28mm T35х1"Wx35 – 35 x 35mm T35х1 1/4"Wx35 – 35 x 35mm T42х1 1/2"Wх42 – 35 x 35mm T54х2"Wх54 – 54 x 54mm 90°B Elbow L15a – 15 x 15mm L18а – 18 x 18mm L22a – 22 x 22mm L28a – 28 x 28mm L35a – 35 x 35mm L42а – 42 x 42mm L54а – 54 x 54mm 90°A Elbow L15 – 15 x 15mm L18 – 18 x 18mm L22 – 22 x 22mm L28 – 28 x 28mm L35 – 35 x 35mm L42 – 42 x 42mm L54 – 54 x 54mm Female threaded elbow L15х1/2"N – 15 x 15mm L18х1/2"N – 18 x 18mm L18х3/4"N – 18 x 18mm L22х1/2"N – 22 x 22mm L22х3/4"N – 22 x 22mm L28х3/4"N – 28 x 28mm L35х1"N – 35 x 35mm Male threaded elbow L15x1/2"W – 15 x 15mm L18х1/2"W – 18 x 18mm L18х3/4"W – 15 x 15mm L22x1/2"W – 22 x 22mm L22x3/4"W – 22 x 22mm L28x3/4"W – 28 x 28mm L35x1"W – 35 x 35mm Female threaded elbow with base L15х1/2"N(a) – 15 x 15mm L18х1/2"N(a) – 18 x 18mm L22х1/2"N(a) – 22 x 22mm L22х3/4"N(a) – 22 x 22mm 45°B Elbow 45°L15a – 15 x 15mm 45°L18а – 18 x 18mm 45°L22a – 22 x 22mm 45°L28a – 28 x 28mm 45°L35a – 35 x 35mm 45°L42а – 42 x 42mm 45°L54а – 54 x 54mm 45°A Elbow 45°L15 – 15 x 15mm 45°L18 – 18 x 18mm 45°L22 – 22 x 22mm 45°L28 – 28 x 28mm 45°L35 – 35 x 35mm 45°L42 – 42 x 42mm 45°L54 – 54 x 54mm One end pipe bridge Ω15a – 15 x 15mm Ω18a – 18 x 18mm Ω22a – 22 x 22mm Pipe Bridge Ω15 – 15 x 15mm Ω18 – 18 x 18mm Ω22 – 22 x 22mm Ω28 – 28 x 28mm Cap D15 – 15 x 15mm D18 – 18 x 18mm D22 – 22 x 22mm D28 – 28 x 28mm D35 – 35 x 35mm D42 – 42 x 42mm D54 – 54 x 54mm Pipe Mingshi Stainless Steel Pipe (To EN 10312) 15mm to 54mm

Approval Holder:: KONTUR EESTI OÜ

Company Name
KONTUR EESTI OÜ
Address
Türi tn 10d, Tallinn, 11313, Harju maakond
Country
Estonia

View All Listings by this Company