Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2101802

Range of deck mounted, two hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members or non-rising spindle headworks with cross top operating members (model CR26 & CR26/501). The spout outlet incorporates a plastic flow straightener (models CR26 & CR26/501 do not incorporate a flow straightener). The products are supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:: 0510 Combination Tap Assemblies
Section Subtitle:: Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:: 2101802
Size:: ¾” BSP (M).
Marking:: DTC34 (brand of Methven) on rear of body (all models). Deva on operating member (model RVL108 only).
Installation Requirements:: R001 R005 R010
Expiry date:: 31/01/2026
Model:: Lever action bath filler: DLT108 VW DLT108 Revelle deck mounted bath filler: RVL108 Georgian bath filler: GE08 GE08/501 Tudor pillar mounted bath filler: TUD08 TUD08/501 EBT2008 EBT2008501 Coronation bath filler: CR26 CR26/501

Approval Holder:: Methven UK Limited

Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

WRAS Approval Number: #2010044

Range of wall mounted, concealed two-hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes) incorporating ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator, some also incorporate a flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:: 0510 Combination Tap Assemblies
Section Subtitle:: Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:: 2010044
Size:: ½” BSP (F)
Marking:: VADO on faceplate or operating member.
Installation Requirements:: R001 R010 R040
Expiry date:: 31/10/2025
Model:: EDI-109S/A-C/P IND-EDI109S/A-BG IND-EDI109S/A-BLK IND-EDI109S/A-BN IND-EDI109S/A-BRG IND-EDI109S/A-BRN IND-EDI109S/A-BRZ LIF-109S/A-200-C/P LIF-109S/A-C/P NOT-109S/A-C/P IND-NOT109S/A-BG IND-NOT109S/A-BLK IND-NOT109S/A-BN IND-NOT109S/A-BRG IND-NOT109S/A-BRN IND-NOT109S/A-BRZ NOT-109S/A-220-C/P IND-NOT109SA220-BLK ORI-109S/A-C/P IND-ORI109S/A-BG IND-ORI109S/A-BLK IND-ORI109S/A-BN IND-ORI109S/A-BRG IND-ORI109S/A-BRN IND-ORI109S/A-BRZ PHA-109S/A-C/P PHO-109S/A-C/P ZOO-109S/A-C/P IND-ORI209-2-BLKK IND-ORI209-2-BRGK IND-ORI209-2-BRNK IND-ORI209-2-BRZK IND-ORI209SA-220-BC IND-ORI209SA-220-BG IND-ORI209SA-220-BLK IND-ORI209SA-220-BN IND-ORI209SA-220-BRG IND-ORI209SA-220-BRN IND-ORI209SA-220-BRZ IND-ORI209SA-BC IND-ORI209SA-BG IND-ORI209SA-BLK IND-ORI209SA-BLKK IND-ORI209SA-BN IND-ORI209SA-BRG IND-ORI209SA-BRGK IND-ORI209SA-BRN IND-ORI209SA-BRNK IND-ORI209SA-BRZ IND-ORI209SA-BRZK ORI-209-2-CPK ORI-209S/A-220-CP ORI-209S/A-CP ORI-209S/A-CPK. Models added March 2021: NOT-109FS/A-C/P IND-NOT109FS/A-BLK IND-NOT109FS/A-BRG IND-NOT109FS/A-BRN IND-NOT109FS/A-BG NOT-109FS/A-220-C/P ORI-109FS/A-C/P IND-ORI109FS/A-BLK IND-ORI109FS/A-BRG IND-ORI109FS/A-BRN IND-ORI109FS/A-BG PHA-109FS/A-C/P PHO-109FS/A-C/P IND-ORI209SA-XBGK IND-ORI209SA-XGBK IND-ORI209SA-XBNK IND-ORI209SA-XNBK IND-ORI209SA-XBZK IND-ORI209SA-XZBK Products are identical other than finish or handle variants or spout length. explanation of the origins codes for example IND–ORI209-2-BLKK (AAA-BBBCCC-D-EEEF) A= the IND prefix indicates that the product is in VADO's 'individual range' i.e. in a finish other than chrome B= these letters indicate the product collection ORI= Origins for example C= these three numbers indicate the product type 209= slimline concealed wall mounted basin filler D= 2 or 220 here indicates that the product is the longer spout version. the reason for the 2 options for the same thing is due to limitations on code length E= the first part of the suffix indicates the surface finish BRZ- bronze BRN- brushed nickel BRG- brushed gold BN- Bright Nickel BLK- Black BG- bright gold BC- brushed chrome CP- chrome F= a K here indicates that the handle is knurled

Product Images

Approval Holder:: VADO

Company Name
VADO
Address
Cheddar Business Park Wedmore Road Cheddar
Postcode
BS27 3EB
Country
United Kingdom
Phone
01934 745895
General Email
tom.ross@vado.com

View All Listings by this Company

WRAS Approval Number: #2012073

Range of wall mounted, two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener. The inlet offset unions incorporate an isolation valve. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:: 2012073
Size:: ½ “- ¾” BSP (M) Offset Valve.
Marking:: Delabie on operating member.
Installation Requirements:: R001 R010 R040
Expiry date:: 31/12/2025
Model:: BIOSAFE Wall Mixers : 2640 (Spout L. 120mm & Eccentric coupling STOP-CHECK ref. 855755); 2641 (Spout L. 200mm & Eccentric coupling STOP-CHECK ref. 855755). Model added May 2022: 2640P (Spout L. 120mm & Eccentric coupling STOP-CHECK ref. 855755UK). Model added April 2024: 2644P – Eccentric coupling Stop-Check

Approval Holder:: Delabie UK Ltd.

Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company
Manufacturer:: Delabie UK Ltd.

Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company

WRAS Approval Number: #2010385

‘Epsilon Series’ polypropylene bodied compression fittings with EPDM ‘O’-rings for use with Elysee PE80 blue pipes. The fittings are supplied with a pipe liner. Above and below ground use. Maximum working pressure 12.5 bar. Cold water use only.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2010385
Note:: The liners supplied with each fitting must be used to maintain the validity of this approval. R008 applies to the connecting blue pipework when used above ground.
Size:: See model
Marking:: Fittings: Elysee, DVGW, EU, size and PN on the compression nut. Size and date of manufacture (clock format) on body. Pipe: Elysee, EN12201, size, PN and production date code (CDDMMY, where C = decade, and is replaced with 6 to indicate 2020).
Installation Requirements:: R001 R008
Expiry date:: 31/10/2025
Model:: ELYSEE COMRESSION FITTINGS: Male Adaptor 330: 330002001: Ø 20 x ½". 330002002: Ø 20 x ¾". 330002003: Ø 20 x 1". 330002501: Ø 25 x ½". 330002502: Ø 25 x ¾". 330002503: Ø 25 x 1". 330003201: Ø 32 x ½". 330003202: Ø 32 x ¾". 330003203: Ø 32 x 1". 330003204: Ø 32 x 1¼". 330003205: Ø 32 x 1½". Female Adaptor 330A: 330A02001: Ø 20 x ½". 330A02002: Ø 20 x ¾". 330A02010: Ø 20 x ⅜". 330A02501: Ø 25 x ½". 330A02502: Ø 25 x ¾". 330A02503: Ø 25 x 1". 330A03201: Ø 32 x ½". 330A03202: Ø 32 x ¾". 330A03203: Ø 32 x 1". 330A03204: Ø 32 x 1¼". 330A03205: Ø 32 x 1½". End Plug 330B: 330B00020: Ø 20. 330B00025: Ø 25. 330B00032: Ø 32. Coupling 331: 331020020: Ø 20 x 20. 331025025: Ø 25 x 25. 331032032: Ø 32 x 32. Reducing Coupling 331A: 331A02520: Ø 25 x 20. 331A03220: Ø 32 x 20. 331A03225: Ø 32 x 25. Elbow 332: 332020020: Ø 20 x 20. 332025025: Ø 25 x 25. 332032032: Ø 32 x 32. Male Elbow 332A: 332A02001: Ø 20 x ½". 332A02002: Ø 20 x ¾". 332A02501: Ø 25 x ½". 332A02502: Ø 25 x ¾". 332A02503: Ø 25 x 1". 332A03202: Ø 32 x ¾". 332A03203: Ø 32 x 1". Female Elbow 332B: 332B02001: Ø 20 x ½". 332B02002: Ø 20 x ¾". 332B02501: Ø 25 x ½". 332B02502: Ø 25 x ¾". 332B02503: Ø 25 x 1". 332B03202: Ø 32 x ¾". 332B03203: Ø 32 x 1". Female Tee 333: 333002001: Ø 20 x ½" x 20. 333002002: Ø 20 x ¾" x 20. 333002501: Ø 25 x ½" x 25. 333002502: Ø 25 x ¾" x 25. 333002503: Ø 25 x 1" x 25. 333003202: Ø 32 x ¾" x 32. 333003203: Ø 32 x 1" x 32. Male Tee 333A: 333A02001: Ø 20 x ½" x 20. 333A02002: Ø 20 x ¾" x 20. 333A02003: Ø 20 x 1" x 20. 333A02501: Ø 25 x ½" x 25. 333A02502: Ø 25 x ¾" x 25. 333A02503: Ø 25 x 1" x 25. 333A03201: Ø 32 x ½" x 32. 333A03202: Ø 32 x ¾" x 32. 333A03203: Ø 32 x 1" x 32. Tee 334: 334020020: Ø 20 x 20 x 20. 334025025: Ø 25 x 25 x 25. 334032032: Ø 32 x 32 x 32. Reducing Tee 334A: 334A02520: Ø 25 x 20 x 25. 334A03225: Ø 32 x 25 x 32. Wall Female Elbow 332D: 332D02001: Ø 20 x ½". 332D02502: Ø 25 x ¾". Elbow Female For POP-UP 332C: 332C02501: Ø 25 x ½" x 25. 332C03201: Ø 32 x ½" x 32. 332C03202: Ø 32 x ¾" x 32. Universal Adaptor 321C: 321C02522: Ø 25 x 22. 321C03222: Ø 32 x 22. Repair Coupling 331B: 331B00025: Ø 25 x 25. 331B00032: Ø 32 x 32. ELYSEE PE80 BLUE PIPES: 21125020***: 20mmX2.3mm, SDR9, SF1.25, PN12.5. 21125025***: 25mmX2.3mm, SDR11, SF1.25, PN12.5. 21125032***: 32mmX3.0mm, SDR11, SF1.25, PN12.5. Where *** = length of the pipe coil, (025 = 25m, 050 = 50m, 100 = 100m).

Approval Holder:: Elysee Irrigation Ltd.

Company Name
Elysee Irrigation Ltd.
Address
5, Pentadaktylou St. 2643 Ergates Industrial Area, Nicosia
Country
Cyprus
Phone
+357 22 455 000

View All Listings by this Company
Manufacturer:: Elysee Irrigation Ltd.

Company Name
Elysee Irrigation Ltd.
Address
5, Pentadaktylou St. 2643 Ergates Industrial Area, Nicosia
Country
Cyprus
Phone
+357 22 455 000

View All Listings by this Company

WRAS Approval Number: #2010034

Range of copper and bronze capillary brazed fittings for use with copper pipe manufactured to EN1057:2006 +A1:2010. Maximum pressure 10.0 Bar (54mm up to and including 108mm) Maximum pressure 2.0 Bar (Over 108mm up to and including 159mm) Maximum operating temperature 100°C.

Section:: 1115 Fittings for use with Tube and Pipe
Section Subtitle:: Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2010034
Marking:: Marking: Flowflex logo, number of standard and size on the bodies
Installation Requirements:: R001
Expiry date:: 31/10/2025
Model:: 5002A LONG EQUAL 90DEG BEND EF (Size = mm Brazed): 5002A.67, 5002A.76, 5002A.89, 5002A.108. 5041 45DEG ELBOW EF (Size = mm Brazed): 5041.67, 5041.76, 5041.108, 5041.133, 5041.159. 5090 EQUAL ELBOW EF (Size = mm Brazed): 5090.67, 5090.76, 5090.89, 5090.108, 5090.133, 5090.159. 5092 STREET ELBOW EF (Size= mm Brazed): 5092.67, 5092.76. 5130 TEE EQUAL EF (Size = mm Brazed): 5130.67, 5130.76, 5130.108, 5130.133, 5130.159. 5130R TEE REDUCED BRANCH EF (Size = mm x mm x mm Brazed): 5130R.672867, 5130R.673567, 5130R.674267, 5130R.675467, 5130R.762876, 5130R.763576, 5130R.764276, 5130R.765476, 5130R.766776, 5130R.10835108, 5130R.10842108, 5130R.10854108, 5130R.10867108, 5130R.10876108, 5130R.133108133, 5130R.15954159, 5130R.15967159, 5130R.15976159, 5130R.159108159, 5130R.159133159. 5240 REDUCING CPLG (Size = mm x mm Brazed): 5240.67x42, 5240.67x54, 5240.76x54, 5240.76x67, 5240.89x76, 5243 FITTING RED EF (Size = mm x mm Brazed): 5243.67x22, 5243.67x28, 5243.67x35, 5243.67x42, 5243.67x54, 5243.76x35, 5243.76x42, 5243.76x54, 5243.76x67, 5243.89x76, 5243.108x42, 5243.108x54, 5243.108x67, 5243.108x76, 5243.108x89, 5243.133x67, 5243.133x76, 5243.133x108, 5243.159x76, 5243.159x108, 5243.159x133. 5270 COUPLING EF (Size = mm x mm Brazed): 5270.67, 5270.76, 5270.89, 5270.108, 5270.133, 5270.159. 5301 STOP END EF (Size = mm Brazed): 5301.67, 5301.76, 5301.89, 5301.108, 5301.159. 4270G CUFI STRAIGHT BRONZE ADAPTOR (Size = mm Brazed x BSP M): 4270G.67x2½”, 4270G.76x3", 4270G.108x4". 4243G CUIT ADAPTOR BRONZE (Size = mm Brazed by BSP F): 4243G.67x2½”, 4243G.76x2½”, 4243G.76x3", 4243G.108x4". Type of Tube: EN 1057:2006 +A1:2010 Seamless round copper tube, material condition R250 half hard

Product Images

Approval Holder:: Flowflex Components Ltd.

Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Country
United Kingdom
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company