‘ResiGard APUA (NT) Coating'. Factory applied, grey coloured (once mixed), two-component coating. Mix and apply as per Technical Data Sheet ‘PDS/RG37/Ver15/01/25’. Cure for 1 minute@25°C. For use with water up to 85°C.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2106564

Expiry date:

30/06/2026

Approval Holder:

Conmix Ltd.

Company Name

Conmix Ltd.

Address

Dubai Industrial City (DIC)

Country

United Arab Emirates

View All Listings by this Company

`MECH WEY-Black, WEY-Red & WEY-Blue`. Factory applied epoxy coatings. Apply and cure as per manufacturer's instructions '24136' dated 2025/1/26. For use with water up to 85°C.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2104567

Expiry date:

30/04/2026

Approval Holder:

Jinan Meide Casting Co., Ltd.

Company Name

Jinan Meide Casting Co., Ltd.

Address

No.1 Meide Street, Meigui Town, Pingyin County, Jinan, Shandong

Postcode

250400

Country

China

Phone

+86 (531) 87876706

View All Listings by this Company

'Busan-Tank'. Light grey coloured, hot pressed GRP panel. For use with water up to 50°C.

Section:

5120 Glass Reinforced Plastics (GRP)

Section Subtitle:

Components.

WRAS Approval Number:

2104566

Expiry date:

30/04/2026

Approval Holder:

Colex Korea Co., Limited

Company Name

Colex Korea Co., Limited

Address

75-2, Gomo-Ro, 216 Beon-Gil, Jillye-Myeon, Gimhae-Si, Gyeongsangnam-Do, 50875

Country

Korea, Republic of

View All Listings by this Company

Range of copper press fittings with EPDM rubber ‘O’-rings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2106063

Size:

15mm to 108mm

Marking:

RP - Rapid Press, WRAS Approved Product logo, Size & batch number.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

CCP015 - CCP108 15 - 108mm. FRCP Reducer x press: 22mmx15mm - FRCP022015 28mmx15mm - FRCP028015 28mmx22mm - FRCP022022 35mmx22mm - FRCP035022 35mmx28mm - FRCP035028 42mmx22mm - FRCP042022 42mmx28mm - FRCP042028 42mmx35mm - FRCP042035 54mmx35mm - FRCP054035 54mmx42mm - FRCP054042 67mmx54mm - FRCP067054 76mmx67mm - FRCP076067 108mmx76mm - FRCP108076 SECP015 - SECP108 Bend 90° x press: 15 - 108mm. ECP015 - EPC108 Bend 90° press x press: 15 - 108mm. ETCP015 - ETCP108 Equal Tee 3 x press: 15 - 108mm. 6040 & 6040CP Bend 45° x press: 12 - 108mm. OECP015 - OECP108 Bend 45° press x press: 15 - 108mm. RTCP015015022 -RTCP108108076 Reducing Tee 3 x press: 15mmx22mmx15mm 22mmx15mmx22mm 28mmx15mmx28mm 28mmx22mmx28mm 35mmx15mmx35mm 35mmx22mmx35mm 35mmx28mmx35mm 42mmx22mmx42mm 42mmx28mmx42mm 42mmx35mmx42mm 54mmx28mmx54mm 54mmx35mmx54mm 54mmx42mmx54mm 67mmx54mmx67mm 76mmx67mmx76mm 108mmx76mmx108mm 6085 & 6085CP Full Crossover: 15mm x 15mm - 22mm x 22mm. 6086 & 6086CP Partial Crossover: 15mm x 15mm - 22mm x 22mm. 6510 & 6510CP Flange PN16: 76.1mm. Chrome plated models added 02/06/2023

Approval Holder:

Rapid Press Fittings Ltd

Company Name

Rapid Press Fittings Ltd

Address

2 Penrod Way Heysham Lancashire

Postcode

LA3 2UZ

Phone

(01524) 965100

General Email

jacobrelph@phd.ltd

View All Listings by this Company

Range of flexible joints incorporating an EPDM (inner & outer) joint with a steel reinforcing ring and two carbon steel flanges. Maximum operating pressure 16.0 bar. Maximum operating temperature 65°C.

Section:

1530 Miscellaneous Fittings

Size:

see model

Marking:

GENEBRE on the flexible connection. GENEBRE, DN, connection type & length on label on product On the flange: DIN PN 10/16 1.0038

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

2831 07 (DN32), 2831 08 (DN40), 2831 09 (DN50), 2831 10 (DN 65), 2831 11 (DN80), 2831 12 (DN100), 2831 13 (DN 125), 2831 14 (DN150).

Product Images

Approval Holder:

Genebre, S.A

Company Name

Genebre, S.A

Address

Poligono Industrial Pedrosa, Avinguda Joan Carles I, 46 – 48, Edificio GENEBRE Hospitalet de Llobregat

Postcode

08908

Country

Spain

Phone

(+34) 93 298 80 00

General Email

cazorla@genebre.es

View All Listings by this Company