Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2104532

'CeramycGuard for use with QuartzSeal'. Site applied, white coloured (once mixed) polymer based concrete surface treatment. 'CeramycGuard’ is a three-component base coat comprising of Part A (clear liquid), Part B (grey powder) & Part C (clear liquid). Mix Parts A, B & C in a volume ratio. Rest for two minutes, apply as per manufacturer's instructions for use 'version 2' dated 'April 2021' and then cure for 24 hours@21°C. ‘QuartzSeal' is a white coloured, single-component topcoat. Apply as per manufacturer's instructions for use 'version 2' dated 'April 2021'. Cure for 7 days@21°C. For use with water up to 23°C. These materials are only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:: 5038 Coatings, Paints & Linings
Section Subtitle:: Site applied concrete coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:: 2104532
Expiry date:: 30/04/2026

Approval Holder:: Haydale Technologies Inc.

Company Name
Haydale Technologies Inc.
Address
1446 S. Buncombe Road, Greer, SC 29651
Country
United States

View All Listings by this Company

WRAS Approval Number: #2105510

'Brushbond FLXIII'. Site applied, grey coloured, two-part elastomeric/cementitious coating. Mix and apply in accordance with manufacturer's instructions 'v10' dated October 2020. Cure coat 1 for 18 hours@7°C. Cure coat 2 for 21 days@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5042 Coatings, Paints & Linings
Section Subtitle:: Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:: 2105510
Expiry date:: 31/05/2026

Approval Holder:: Saint-Gobain Construction Chemicals UK Limited

Company Name
Saint-Gobain Construction Chemicals UK Limited
Address
Saint-Gobain House, East Leake, Loughborough, Leicestershire
Postcode
LE12 6JU

View All Listings by this Company

WRAS Approval Number: #2104509

`Yorkshire Flux 130 (White)`. White coloured paste flux. For use with water up to 85°C.

Section:: 5090 Fluxes
Expiry date:: 30/04/2026

Approval Holder:: Aalberts Integrated Piping Systems Ltd.

Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

WRAS Approval Number: #2105505

'Mapex® AN4920SN FWB50 & GITOP® G3A2 M01FWB'. Black coloured, injection moulded, glass fibre reinforced PA66 materials. For use with water up to 85°C.

Section:: 5180 Nylon
Section Subtitle:: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2105505
Expiry date:: 31/05/2026

Approval Holder:: Jiangsu Ginar Plastic Technology Co. Ltd.

Company Name
Jiangsu Ginar Plastic Technology Co. Ltd.
Address
No.685, Huaihe East Road, Huaiyin District, Huaian City, Jiangsu
Country
China

View All Listings by this Company

WRAS Approval Number: #2105511

AKROMID® A3 GF 25 8 HU natural (8120) AKROMID® A3 GF 30 8 HU natural (8102) AKROMID® A3 GF 33 8 HU natural (8128) AKROMID® A3 GF 35 8 HU natural (8121) AKROMID® A3 GF 40 8 HU natural (8122) AKROMID® A3 GF 43 8 HU natural (8130) AKROMID® A3 GF 45 8 HU natural (8123) AKROMID® A3 GF 50 8 HU natural (8124) AKROMID® A3 GF 55 8 HU natural (8125) AKROMID® A3 GF 60 8 HU natural (8126) AKROMID® A3 GF 25 8 HU black (8118) AKROMID® A3 GF 30 8 HU black (8112) AKROMID® A3 GF 33 8 HU black (8129) AKROMID® A3 GF 35 8 HU black (8113) AKROMID® A3 GF 40 8 HU black (8114) AKROMID® A3 GF 43 8 HU black (8131) AKROMID® A3 GF 45 8 HU black (8115) AKROMID® A3 GF 50 8 HU black (8116) AKROMID® A3 GF 55 8 HU black (8119) AKROMID® A3 GF 60 8 HU black (8117) Natural (appears white) and black coloured, injection moulded, glass fibre reinforced PA66 materials. For use with water up to 85°C.

Section:: 5180 Nylon
Section Subtitle:: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2105511
Expiry date:: 31/05/2026

Approval Holder:: Akro Plastic GmbH

Company Name
Akro Plastic GmbH
Address
Industriegebiet Bronhital-Ost Im Stiefelfeld 1 56651 Niederzissen
Country
Germany
Phone
+49 2636 9742 0 +49 2636 9742 0 +49 2636 9742 0
General Email
info@akro-plastic.com

View All Listings by this Company