Directory Search Results

Print List

#2203321

Range of deck mounted, single hole, single outlet (fixed) electronically operated tap assemblies (Chromium plated brass). Flow is controlled by a solenoid valve activated via an infra-red sensor. The products are supplied with a tee piece for installation prior to the solenoid valve. The inlets of the tee piece incorporate a combined NBR gasket and stainless steel filter and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are also supplied with stainless steel braided PEX lined flexible (connecting) hose assemblies and angled spherical valves incorporating a stainless steel strainer for installation on each inlet. Temperature is controlled by adjusting the opening of each angled spherical valve. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2203321
Size:
½” BSP (M) (to isolation valves).
Marking:
Gessi logo on spout backplate
Installation Requirements:
R001 R006 R007 R010 R557
Expiry date:
31/03/2027
Model:
54081 ELECTRONIC BASIN MIXER (flessa decoration), 54181 ELECTRONIC BASIN MIXER (intreccio decoration), 54281 ELECTRONIC BASIN MIXER (meccanica decoration), 54381 ELECTRONIC BASIN MIXER (trame decoration), 54481 ELECTRONIC BASIN MIXER (cesello decoration).
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#2205063

A range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The temperature is controlled independently via a single lever operating member. The spout outlet incorporates a plastic aerator. These products are supplied with an inline servicing valve integrated with a strainer and single check valve assemblies that has been verified by test for back flow prevention level 2. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2205063
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection.
Marking:
Armitage Shanks on body
Installation Requirements:
R001 R009 R010 R040
Expiry date:
31/05/2027
Model:
A7554AA Sensorflow Basin mixer panel mounted Mix Battery. A7555AA Sensorflow Basin mixer panel mounted Mix Mains.

Approval Holder:
Armitage Shanks
Company Name
Armitage Shanks
Address
Old Road (Lodge 1), Armitage, Rugeley
Postcode
WS15 4BT
Country
Staffordshire,
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Print This Approval


#2205064

A range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The temperature is controlled independently via a single lever operating member. The spout outlet incorporates a plastic aerator. These products are supplied with an inline servicing valve integrated with a strainer and single check valve assemblies that has been verified by test for back flow prevention level 2. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2205064
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut with a check valve integrated strainer, servicing valve assembly with a 15mm compression inlet
Marking:
Armitage Shanks on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2027
Model:
A7549AA Sensorflow BASIN EL SPT Rim-Mounted MIX MAINS. A7550AA Sensorflow BASIN EL SPT Rim-Mounted MIX BATTERY.

Approval Holder:
Armitage Shanks
Company Name
Armitage Shanks
Address
Old Road (Lodge 1), Armitage, Rugeley
Postcode
WS15 4BT
Country
Staffordshire,
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Print This Approval


#2205328

Range of deck mounted sensor taps. The flow is controlled via a solenoid valve and activated by an infra-red sensor on the front of the spout. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C (models 1070021 and 1070025). Maximum operating temperature 60°C (model 1070024).

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2205328
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Frascio on body
Installation Requirements:
R001 R006 R009
Expiry date:
31/05/2027
Model:
1070021 1070024 1070025
Product Images

Approval Holder:
Frascio (Guangdong) Co., Ltd
Company Name
Frascio (Guangdong) Co., Ltd
Address
288 JIN'OU ROAD #07-03 HUOJU MANSION JIANGHAI DIST JIANGMEN GUANGDONG 929040
Country
China

View All Listings by this Company
Manufacturer:
Frascio (Guangdong) Co., Ltd
Company Name
Frascio (Guangdong) Co., Ltd
Address
288 JIN'OU ROAD #07-03 HUOJU MANSION JIANGHAI DIST JIANGMEN GUANGDONG 929040
Country
China

View All Listings by this Company

Print This Approval


#2204045

Range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlets incorporate plastic flow straightener, and the inlet incorporates a plastic filter. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2204045
Size:
½” BSP (M)
Marking:
Delabie on end of spout
Installation Requirements:
R001 R040 R570
Expiry date:
30/04/2027
Model:
443006, Tempomatic 3 443506, Tempomatic 4 443406, Tempomatic 4
Product Images

Approval Holder:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 340 of 1251

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.