Directory Search Results

Print List

#2212038

Range of single hole, single outlet, electronically controlled tap assemblies (chrome plated brass body). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Supplied with a stainless steel braided PEX lined flexible connection hose and a manual lever for controlling the temperature. Maximum working pressure 8.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2212038
Size:
½” BSP male
Marking:
Stern on top of body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2027
Model:
239200 - Trendy 1000B, 239300 - Trendy 1000E, 239600 - Trendy 1000LB, 239700 - Trendy 1000LE, 239201 - Trendy 1000B AB1953, 239301 - Trendy 1000E AB1953, 239601 - Trendy 1000LB AB1953, 239701 - Trendy 1000LE AB1953.

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#2112367

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112367
Size:
½” BSP (M)
Marking:
Tissino on flush plate, Tissino on label inside cistern and 6l water line.
Installation Requirements:
R001 R556 R571
Expiry date:
31/12/2026
Model:
TRC-101 ROCCO 2 & TRC-107 ROCCO 2

Approval Holder:
Tissino Ltd.
Company Name
Tissino Ltd.
Address
Unit 2 A Lyncastle Road Appleton Thorn Warrington
Postcode
WA4 4SN
Country
Cheshire

View All Listings by this Company

Print This Approval


#2112368

Range of concealed WC flushing cisterns incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112368
Size:
½” BSP (M)
Marking:
Tissino on flush plate, Tissino on label inside cistern and 6l water line.
Installation Requirements:
R001 R556
Expiry date:
31/12/2026
Model:
TRC-104 ROCCO 2 SLIMLINE & TRC-106 ROCCO 2

Approval Holder:
Tissino Ltd.
Company Name
Tissino Ltd.
Address
Unit 2 A Lyncastle Road Appleton Thorn Warrington
Postcode
WA4 4SN
Country
Cheshire

View All Listings by this Company

Print This Approval


#2206330

Concealed WC flushing cisterns incorporating a BS 1212-4 side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button and incorporates a angle valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2206330
Size:
3/8” BSP Captive nut
Marking:
Alca on adhesive label on cistern, Alca printed on flush plate. 6L & waterline moulded within cistern.
Installation Requirements:
R001 R556 R571 R581
Expiry date:
30/06/2027
Model:
AM101

Approval Holder:
Alcadrain, s.r.o.
Company Name
Alcadrain, s.r.o.
Address
Komunardů 1626/35, Praha 7 - Holešovice 170 00 Czech Republic
Country
Czech Republic

View All Listings by this Company
Manufacturer:
Alcadrain, s.r.o.
Company Name
Alcadrain, s.r.o.
Address
Komunardů 1626/35, Praha 7 - Holešovice 170 00 Czech Republic
Country
Czech Republic

View All Listings by this Company

Print This Approval


#2107149

Range of floor mounted, single hole, single outlet (fixed), combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a manual diverter to shower outlet. The spout has a waterfall outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0675 Combination Tap Assemblies
Section Subtitle:
Multi-hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2107149
Note:
This approval does not include a shower hose and handset.
Size:
M12 (F)
Marking:
Niagara (Brand of Cavalier) & Model on body
Installation Requirements:
R001 R020 R160
Expiry date:
31/07/2026
Model:
9088, 9088BL & 9088BRS COMBINATION TAP ASSEMBLIES

Approval Holder:
Cavalier Marketing Ltd.
Company Name
Cavalier Marketing Ltd.
Address
Unit 2 Riverside Business Park Royd Ings Avenue Keighley
Postcode
BD21 4AF
Country
West Yorkshire
Phone
01535 613 830
General Email
sales@cavaliermarketing.co.uk

View All Listings by this Company

Print This Approval


#2109067

Range of single check valve assemblies with DZR brass bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
2109067
Size:
15mm (1CVF005), 22mm (1CVF007) or 28mm (1CVF009) Compression
Marking:
Albion logo (A), CR, size, PN and flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/09/2026
Model:
ART 39 15mm, ART 39 22mm & ART 39 28mm

Approval Holder:
Albion Valves (UK) Limited
Company Name
Albion Valves (UK) Limited
Address
9a Fallbank Industrial Estate Dodworth Barnsley
Postcode
S75 3LS
Country
United Kingdom
Phone
01226 729900
General Email
samjed@albionvalvesuk.com

View All Listings by this Company

Print This Approval


#2212329

Range of flushing valves (gunmetal body) which incorporate a screw down stop valve, spherical valve and air gap to drain. Maximum working pressure 10.0 bar. Cold water use only.

Section:
0046 Backflow Prevention Devices
Section Subtitle:
Tundish(s) air break to drain.
WRAS Approval Number:
2212329
Size:
Range of flushing valves (gunmetal body) which incorporate a screw down stop valve, spherical valve and air gap to drain. Maximum working pressure 10.0 bar. Cold water use only.
Marking:
Kemper on body.
Installation Requirements:
R001 R415 R570
Expiry date:
31/12/2027
Model:
KHS Flush Point range comprising of model codes: 6840001500, 6840101500, 6840401500 & 6840501500.

Approval Holder:
Gebr. Kemper GmbH+Co. KG
Company Name
Gebr. Kemper GmbH+Co. KG
Address
Harkortstr. 5 Olpe
Postcode
57462
Country
Germany
Phone
+49 2761 8910
General Email
h.u.gall@gall-engineering.de

View All Listings by this Company

Print This Approval


#2212051

Range of aerators/flow regulators with chrome plated brass bodies, incorporating silicon seals. The products also incorporate either plastic (SB-STA ASQPQ 023A & SB-TA ASQPQ 011) or stainless-steel strainers (SB-ILFR). Open outlet use only.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
0435 Taps and shower valves - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
2212051
Size:
M22 (M) - SB-STA ASQPQ 023A, M22 (f) - SB-TA ASQPQ 011 and SB-ILFR.
Marking:
ShowerBob on body.
Installation Requirements:
R001 R040
Expiry date:
31/12/2027
Model:
AERATORS SB-STA ASQPQ 023A SB-TA ASQPQ 011 FLOW REGULATORS SB-ILFR

Approval Holder:
BOB Products Limited
Company Name
BOB Products Limited
Address
Avalon House High Street Chalford Stroud Gloucestershire
Postcode
GL6 8DS
Country
United Kingdom
General Email
nigel@showerbob.co.uk

View All Listings by this Company

Print This Approval


#2212054

Range of single hole, single outlet pull out spray, combination tap assemblies (brass bodies, various finishes – see models) incorporating ceramic cartridge headworks with single lever operating members controlling the hot and cold and a quarter turn ceramic disk headwork with a dome type operating member controlling chilled water supply. The spout outlet incorporates a plastic aerator. The inlet from the tap to the pull-out spray hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2212054
Size:
Polyamide braided PEX lined flexible hose assemblies incorporating 3/8" BSP (F) captive nut end connections.
Marking:
Grohe on body
Installation Requirements:
R001 R009 R090
Expiry date:
31/12/2027
Model:
30601000 - Minta pull-out duo L-spout chrome, 30601DC0 - Minta pull-out duo L-spout supersteel, 30590000 - Minta pull-out duo L-spout chrome, 30590DC0 - Minta pull-out duo L-spout supersteel, 30590KF0 - Minta pull-out duo L-spout matt black. Models added June 2023: 416967045 - Minta pull-out duo L-spout chrome, 416967DC4 - Minta pull-out duo L-spout supersteel, 416967KF4 - Minta pull-out duo L-spout matt black.

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2212061

Single hole, metal, single outlet, fixed combination tap assembly (brass body, gold effect finish), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2212061
Size:
Stainless steel braided PEX lined flexible hose 3/8" BSP (F) captive nut end connections.
Marking:
Volevatch on baseplate
Installation Requirements:
R001 R010 R006 R009
Expiry date:
31/12/2027
Model:
L/Y8-MM-P0

Approval Holder:
VOLEVATCH
Company Name
VOLEVATCH
Address
1 BIS PLACE JEAN JAURES 80130 TULLY
Country
FRANCE

View All Listings by this Company
Manufacturer:
VOLEVATCH
Company Name
VOLEVATCH
Address
1 BIS PLACE JEAN JAURES 80130 TULLY
Country
FRANCE

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 332 of 1180

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.