Directory Search Results

Print List

#250104704

Range of 2, 3, 4, 5, 6 and 7 port manifold assemblies with brass bodies incorporating spherical valves with lever type operating members. The port compression connections are for use with copper pipe to EN1057. Maximum working pressure 16.0 Bar. Maximum operating temperature 95.0°C

Section:
1950 Manifolds
Section Subtitle:
Metal.
WRAS Approval Number:
250104704
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (F), ¾” BSP (M), 1” BSP (F), 1” BSP (M) with ½” (14.7mm) compression ports.
Marking:
Sanbra S logo on body, Irish Instantor, size and ISEN1254-2 cast on compression nut.
Installation Requirements:
R001
Expiry date:
31/01/2030
Model:
771892PW - Brass Manifold ¾” x ½” 2 PORT, 771894PW - Brass Manifold ¾” x ½” 3 PORT, 771895PW - Brass Manifold ¾” x ½” 4 PORT, 771885PW - Brass Manifold ¾” x ½” 5 PORT, 771886PW - Brass Manifold ¾” x ½” 6 PORT, 771884PW - Brass Manifold ¾” x ½” 7 PORT, 771893PW - Brass Manifold 1” x ½” 2 PORT.

Approval Holder:
Sanbra Fyffe Ltd.
Company Name
Sanbra Fyffe Ltd.
Address
Instantor Works Santry Avenue Dublin
Postcode
D09 K160
Country
Ireland
Phone
+353(0)1 842 6255
General Email
Ryan.Charleson@Instantor.ie

View All Listings by this Company

Print This Approval


#241104006

Range of automatic air venting valve with bronze bodies. The FTBRZAVW-12 models have a stainless-steel float and a maximum working pressure 12.0 bar. The FTBRZAVW-10 models have a plastic float and a maximum working pressure 10.0 bar. Maximum working pressure - FTBRZAVW-12 models: 12.0 bar, FTBRZAVW-10 models: 10.0 bar. Maximum operating temperature 85°C.

Section:
1980 Valves
Section Subtitle:
Air venting valve(s) Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
241104006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models.
Marking:
flowIT by flowconME, WRAS, model and PN on body.
Installation Requirements:
R001
Expiry date:
30/11/2029
Model:
FTBRZAVW-12: ½” BSP (M), ¾” BSP (M), 1” BSP (M). FTBRZAVW-10: ½” BSP (M), ¾” BSP (M), 1” BSP (M).

Approval Holder:
flowconME s.r.l.
Company Name
flowconME s.r.l.
Address
via Cesare Battisti, 2 CAP 40123 Bologna
Country
Italy
Phone
+39.051.9912714

View All Listings by this Company
Manufacturer:
flowconME s.r.l.
Company Name
flowconME s.r.l.
Address
via Cesare Battisti, 2 CAP 40123 Bologna
Country
Italy
Phone
+39.051.9912714

View All Listings by this Company

Print This Approval


#241204018

Wall mounted, concealed, thermostatic blending valve incorporating a thermostatic cartridge with a dome operating member and supplied with a trim set. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241204018
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Keuco on back plate.
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2029
Model:
59553 xx00zz Trim set 59553 000070 Concealed valve xx = 01 chrome plated; 02 polished bronze; 03 brushed bronze; 04 polished nickel; 05 brushed nickel; 07 stainless steel finish; 12 polished black chrome; 13 brushed black chrome; 17 aluminium finish; 37 black matt zz = 01 rosette round; 02 rosette squared

Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36 Hemer
Postcode
58675
Country
Germany
Phone
+49 2372 / 904-265

View All Listings by this Company

Print This Approval


#250102026

Range of wall mounted concealed thermostatic blending valves, (brass bodies – various finishes). Model (TVT126001000xx) incorporates a quarter turn ceramic disc headwork. Model (TVS126003000xx) incorporates a two-way ceramic disc diverter headwork. Temperature is controlled independently via a thermostatic mixing cartridge that incorporates a manual override button. Both models incorporate approved check valve cartridges; however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure 5.0 Bar or 10.0 Bar (see models). Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250102026
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Only to be used with compatible Villeroy & Boch products.
Marking:
Villeroy & Boch logo on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
31/01/2030
Model:
TVT126001000xx (5.0 Bar) TVS126003000xx (10.0 Bar) xx can be replaced by 61 = Chrome, 74 = Brushed Chrome, 63 = Graphite, 64 = Brushed Nickel matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, 70 = Dune, K5 = Matt black

Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval


#241202011

Range of flanged, lugged or wafer butterfly valves with either lever or hand wheel operating members and a blue or black (from March 2026) epoxy coated ductile iron bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
2020 Valves
Section Subtitle:
Butterfly valve(s)
WRAS Approval Number:
241202011
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
JDF112: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1200 (flanged type). Sizes added July 2025: DN1400, DN1500, DN1600, DN1800, DN2000 (flanged type). JDL112: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1200 (lugged type). JDA112: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1200 (wafer type).
Marking:
Company logo (Tianjin Jiaxiang Tauri), DN & PN16 on body.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
JDF112, JDL112 & JDA112.

Approval Holder:
TIANJIN JIAXIANG TAIRUI VALVE CO., LTD.
Company Name
TIANJIN JIAXIANG TAIRUI VALVE CO., LTD.
Address
No. 26, Zhenghe Road, Beizhakou Electronic Industrial Park, Jinnan District, Tianjin
Country
China

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 330 of 494

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.