Directory Search Results

Print List

#2107105

Range of WC dual flush drop valves comprising of a plastic body, silicone seal and an internal overflow. The valve is operated via a push button or lever assembly for either full or reduced flush. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2107105
Size:
2” BSP (M)
Marking:
Kohler and model number on valve body
Installation Requirements:
R001 R571
Expiry date:
31/07/2026
Model:
1190056 dual flush valve with any of the following actuators: 1278504-XX, 1367704-XX, 1215521-XX or 1199720-XX. 1409397 dual flush valve with 1409402-XX actuator. XX denotes the finish on the actuator, e.g. CP (chrome plating).
Product Images

Approval Holder:
Kohler (Thailand) Public Company Limited
Company Name
Kohler (Thailand) Public Company Limited
Address
16TH FLOOR JASMINE CITY BUILDING 2 SOI SUKHUMVIT 23.

View All Listings by this Company
Manufacturer:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
No.18, Houxiang Road Haicang District Xiamen
Postcode
361022
Country
China
Phone
86-0592-3959422

View All Listings by this Company

Print This Approval


#2012088

Range of waste water heat recovery systems incorporating a twin wall copper coil (7773414 models) or stainless steel (7771332 models). Maximum working pressure 10.0 bar. Cold water use only.

Section:
1350 Heat Exchangers
Size:
½” BSP (M) (7773414) or ¾” BSP (F) (7771332)
Marking:
BAXI, Model, and technical info on adhesive label located on plastic casing.
Installation Requirements:
R001
Expiry date:
31/12/2025
Model:
VERTICAL SHRU 7771332 & HORIZONTAL SHRU 7773414 HEAT EXCHANGERS

Approval Holder:
Baxi Heating UK Ltd.
Company Name
Baxi Heating UK Ltd.
Address
Club Street Bamber Bridge Preston Lancaster
Postcode
PR5 6FN

View All Listings by this Company

Print This Approval


#2011358

Range of heat interface units (HIU) with either twin or single stainless steel copper brazed plate heat exchangers (depending on model) providing heating and hot water (twin unit) hot water only, or heating only. The hot water is generated via a plate heat exchanger. The primary (space heating) circuit incorporates an expansion vessel and a pressure relief valve (set at 3.0 bar). The product incorporates a CAb backflow prevention device (suitable for backflow protection against Fluid Category 3) for filling the heating circuit. The inlet and outlet of all circuits incorporate a lever operated spherical valve. Maximum working pressures and operating temperatures: Primary (district heating): 10.0 bar and 85˚C. Domestic hot water (DHW): 10.0 bar and 60˚C. Secondary (space heating): 2.5 bar and 80˚C.

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2011358
Size:
22mm solder fitting
Marking:
Albion water management, model and other tech info on data label on the side panel.
Installation Requirements:
R001 R140
Expiry date:
30/11/2025
Model:
[Twin Unit]: Standard Twin Plate – heating with 24 plates and hot water with either 14 or 40 plates. Heating connection to cold water by filling loop. Products: TH000240 MTA TWIN 24-40 TH000214 MTA TWIN 24-14 TH001240 MTA TWIN 24-40 HM TH001214 MTA TWIN 24-14 HM [Hot Water Only]: Hot water with either 14 or 40 plates, connection direct to cold water. Products: TH000414 MTA HOT WATER ONLY 00-14 TH000440 MTA HOT WATER ONLY 00-40 TH001414 MTA HOT WATER ONLY 00-14 HM TH001440 MTA HOT WATER ONLY 00-40 HM [Heating Only]: Heating with 40 plates on domestic heating circuit only, connection to cold water via filling loop. Products: TH000340 MTA HEATING ONLY 40-00 TH001340 MTA HEATING ONLY 40-00 HM ‘HM’ stands for heat meter which is on the heating circuit
Product Images

Approval Holder:
Albion Water Management
Company Name
Albion Water Management
Address
30-31 Station Close, Potters Bar, Hertfordshire
Postcode
EN6 1TL
Phone
01707 607230
General Email
water@albiongroup.co.uk

View All Listings by this Company
Manufacturer:
Albion Water Management
Company Name
Albion Water Management
Address
30-31 Station Close, Potters Bar, Hertfordshire
Postcode
EN6 1TL
Phone
01707 607230
General Email
water@albiongroup.co.uk

View All Listings by this Company

Print This Approval


#2103013

Water meter incorporating a brass inner body, a plastic outer body and liquid silicone ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:
1505 Water Meters
Size:
DN15 - 40.
Marking:
Bmeters, serial number and technical information on meter face. Size and flow arrow on water meter body.
Installation Requirements:
R001
Expiry date:
31/03/2026
Model:
Hydrosonic range Sizes: DN15 is available in 110mm, 130mm, 145mm and 165mm lengths. DN20 is available in 130mm and 190mm lengths. DN25 is available in 260mm length only. DN32 is available in 260mm length only. DN40 is available in 300mm length only.
Product Images

Approval Holder:
BMETERS Srl.
Company Name
BMETERS Srl.
Address
Via Friuli No. 3 33050 Gonars (UD) Italy
Phone
+39 0432931415

View All Listings by this Company
Manufacturer:
BMETERS Srl.
Company Name
BMETERS Srl.
Address
Via Friuli No. 3 33050 Gonars (UD) Italy
Phone
+39 0432931415

View All Listings by this Company

Print This Approval


#2007359

Range of concealed bathroom boxes with extractable shower hoses. The inlet attached to the concealed box incorporates an approved single check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The outlet of the shower hose also includes a stainless steel strainer. Maximum operating temperature 60°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2007359
Size:
½” BSP (M)
Marking:
Gessi on outlet for shower hose.
Installation Requirements:
R001 R007 R009 R040
Expiry date:
31/07/2025
Model:
INCISO 01813 (lower side supply). INCISO 01814 (lateral side supply).
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 32 of 232

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.