Directory Search Results

Print List

#2208586

‘TEC S27 R.-70 rosso washers & ‘O’ rings’. Red coloured, injection moulded VMQ washers & ‘O’ rings with a shore hardness of 70. The washers have an in-radius size of between 0.5mm & 2.6mm. The ‘O’ rings have an in-radius size of 0.5mm. From March 2024 the in-radius size range of the ‘O’ rings was extended to between 0.5mm & 2.6mm. For use with water up to 85°C.

Section:
5410 Rubbers
Section Subtitle:
Silicone - components.
WRAS Approval Number:
2208586
Expiry date:
31/08/2027

Approval Holder:
Tecnogomma International SpA
Company Name
Tecnogomma International SpA
Address
Via Castello 46, 24060 Adrara, San Martino
Country
Italy
Phone
0039 035 933 839

View All Listings by this Company

Print This Approval


#2209052

Range of wall mounted electric showers with plastic bodies. Flow is controlled by a solenoid. The product is supplied with a shower hose and a shower handset (white or chrome plated - depending on model). Maximum working pressure 8.0 bar. Maximum operating temperature 55°C.

Section:
1361 Heaters
Section Subtitle:
Electric Shower
WRAS Approval Number:
2209052
Size:
15mm spigot
Marking:
AKW on front of shower casing.
Installation Requirements:
R001 R040
Expiry date:
30/09/2027
Model:
SmartCare plus: 30300 (8.5kW), 30301 (9.5kW), 30302 (10.5kW). SmartCare lever: 30303 (8.5kW), 30304 (9.5kW), 30305 (10.5kW). iTherm: 30306 (8.5kW), 30307 (9.5kW), 30308 (10.5kW). iSure: 30309 (8.5kW), 30310 (9.5kW), 30311 (10.5kW).

Approval Holder:
AKW Medi-Care Limited
Company Name
AKW Medi-Care Limited
Address
Pointon Way Hampton Lovett Droitwich Spa
Postcode
WR9 0LW

View All Listings by this Company

Print This Approval


#2206061

Range of single hole, single outlet (fixed) electronically controlled combination tap assembles with brass bodies (various finishes). Flow is controlled via a solenoid valve activated via an infra -red sensor. The temperature is controlled via a ceramic cartridge and a single lever operating member. The spout outlet incorporates a pull-out spray with a plastic aerator. The trigger on the pull-out controls optional spray. The inlet adaptor incorporates a single check valve cartridge (verified by test, suitable for backflow protection against fluid category 2). The outlet incorporates a stainless-steel strainer and an aerator. Maximum working pressure 5.0 bar Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2206061
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connection attached to check valve bodies with ½” BSP female inlets.
Marking:
Kingfisher Good Home Logo on body
Installation Requirements:
R001 R009 R090
Expiry date:
30/06/2027
Model:
5059340452524

Approval Holder:
Kingfisher International Products Ltd
Company Name
Kingfisher International Products Ltd
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#2211318

Spring loaded resilient trim in-line check valve cartridge with acetal body, incorporating a stainless steel spring and NBR or EPDM ‘O’-rings. To be housed in a specifically dimensioned bores. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C for 31.4232.0; 85°C for 31.0030.0.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
2211318
Size:
see model
Marking:
Neoperl logo, DVGW, WRAS, DN moulded on body
Installation Requirements:
R001
Expiry date:
30/11/2027
Model:
31.4232.0 OV32/DN32 31.0030.0 OV32/DN32-HT

Approval Holder:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

Print This Approval


#2209064

Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies. Maximum working pressure 16.0 bar Maximum operating temperature 85°C

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2209064
Size:
see model
Marking:
Brymec logo, WRAS, size, flow arrow and CR on body
Installation Requirements:
R001
Expiry date:
30/09/2027
Model:
36366 ½” BSP (F) inlet/outlet 36367 ¾” BSP (F) inlet/outlet 36368 1” BSP (F) inlet/outlet 36369 1.1/4" BSP (F) inlet/outlet 36370 1½” BSP (F) inlet/outlet 36371 2” BSP (F) inlet/outlet

Approval Holder:
Brymec Ltd
Company Name
Brymec Ltd
Address
Redlands , Coulsdon, Surrey
Postcode
CR5 2HT
Country
United Kingdom
General Email
Jeremy.douglas@brymec.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 307 of 1303

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.