Combination Tap Assemblies

Section Code 0660 : Three hole tap(s) with a single outlet and a swivel spout.

Back To Directory Sections

#240402014

Three hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating quarter turn ceramic disc headworks with cross top or lever type operating members. The spout outlets incorporate a plastic aerator. The products are supplied with stainless steel braided PEX lined flexible connecting hose assemblies, for use between side body valves and spout. Maximum working pressure - 10 Bar. Maximum operating temperature - 70°C.

Section:
0660 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
240402014
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating ½” BSP captive nut end connectors.
Marking:
AXOR on body
Installation Requirements:
R001 R006 R007 R009 R010
Expiry date:
30/04/2029
Model:
16 513 xx0 16 514 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval

#240502011

Three hole, single outlet (swivel) combination tap assembly (brass body - various finishes), incorporating quarter turn ceramic disc headworks with dome type operating members. The spout outlets incorporate a plastic aerator. The product is supplied with stainless steel braided PEX lined flexible hose assemblies, for use between the valves and spout. Also supplied with a lever type pop up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60.0°C.

Section:
0660 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
240502011
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2" BSP (M).
Marking:
GROHE SPA on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2029
Model:
20.595.xxx. Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite A00 – hard graphit BE0 – polished nickel DL0 – brushed warm sunset EN0 – brushed nickel GN0 – brushed cool sunrise GL0 – cool sunrise
Product Images
Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval

#241102038

Three-hole, single outlet (swivel) combination tap assembly (brass bodies - various finishes). Incorporating quarter turn ceramic disc headworks with single lever operating members. The products are also supplied with stainless steel braided EPDM lined flexible hose assemblies, intended for use between the side body valves and spout. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:
0660 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
241102038
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Carysil logo on rear of spout
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2029
Model:
HS135* Standard finish is chrome but in instance of different finish, standard code denoted by * will be replaced to complete model code with either B-NK (Brushed Nickel), B-BR (Brushed Brass), MB (Matt Black), B-COP (Brushed Copper), GM (Gunmetal)
Product Images
Approval Holder:
Carysil Products Ltd.
Company Name
Carysil Products Ltd.
Address
Ground floor Lower Washford Mill Mill Street Congleton Cheshire
Postcode
CW12 2AD

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 4 of 4

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.