Water Regulations Approval Scheme Ltd

Fittings for use with Tube and Pipe

Section Code 1180 : Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

Back To Directory Sections

WRAS Approval Number: #2312020

JG Speedfit range of push-fit fittings and manifolds for use with Polybutylene Barrier Pipe (manufactured to BS EN 7291-2:2010 ) and PEX Barrier Pipe (manufactured to BS EN 7291-3:2010) and Copper Pipe (manufactured to BS EN1057:). Operating parameters: 12.5 bar@20°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2312020
Note:: R008 to applies to models 15PWB and CM551516W
Size:: 10mm – 22mm push-fit. 5/8” push-fit & ¾” push-fit. ½” & ¾” BSP.
Marking:: John Guest logo and size on body
Installation Requirements:: R001 R008
Expiry date:: 31/12/2028
Model:: FEMALE COUPLER TAP CONNECTOR BSP THREAD PSE3210W 10mm x 1/2" BSP FEMALE PSE3201W 15mm x 1/2" BSP FEMALE PSE3203W 15mm x 3/4" BSP FEMALE PSE3202W 22mm x 3/4" BSP FEMALE STOP END PSE4610W 10mm PSE4615W 15mm PSE4622W 22mm PSE4628W 28mm 4 WAY MANIFOLD SFM512210E 22 x 10mm 4 PORT RAIL MANIFOLD SFM522210E 22mm x 10mm SFM522215E 22mm x 15mm BACK PLATE ELBOW 15PWB: 15mm x 1/2" BSP BULKHEAD ELBOW CM551516W: 15mm x 3/4" BSP CONVERSION CONNECTOR: NC471: ½” ID (Imperial) x 15mm Push-fit NC2324: ¾” ID (Imperial) x 22mm Push-fit

Approval Holder:: RELIANCE WORLDWIDE CORPORATION (UK) LTD

Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company
Manufacturer:: RELIANCE WORLDWIDE CORPORATION (UK) LTD

Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

WRAS Approval Number: #2312074

‘AquaGas M range’ of copper and brass press fit fittings with NBR ‘O’-rings for use with copper tube (manufactured to BS EN 1057). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2312074
Size:: 15 - 54mm. ½” - 2” BSP (M)/(F).
Marking:: PCC GmbH logo (PC), DVGW, size and date of manufacture (YY-MM) on fitting body.
Installation Requirements:: R001
Expiry date:: 31/12/2028
Model:: Press-Copper AquaGas M range: Brass (15-28mm) or Copper (35-54mm) fittings: 79010: Straight Male Adapter, 79020: Straight Female Adapter. Copper fittings: 79000: Straight Coupling, 79030: Straight Reducer, 79040: Slip Coupler, 79100: Equal Tee, 79110: Reduced Tee, 79120: Female Tee, 79200: Bend 90° ff, 79210: Bend 90° mf, 79230: Bend 45° ff, 79240: Bend 45° mf, 79410: End Cap, 79430: Male Reducer.

Approval Holder:: PCC GmbH

Company Name
PCC GmbH
Address
Dusseldorfer Strasse 15, D-71332 Wailblingen
Country
Germany

View All Listings by this Company

WRAS Approval Number: #240204043

‘SharkBite’ range of brass push fit fittings incorporating an EPDM ‘O’-ring. For use with the following pipes: JG Speedfit Layflat Polybutylene Barrier Pipe (JG BPB pipe manufactured to BS EN 7291-2:2010), 'BPEX' Barrier Pipe (JG BPEX pipe manufactured to BS EN 7291-3:2010), Polybutylene barrier pipe (manufactured to BS EN 7291-2:2010), PEX barrier pipe (manufactured to BS EN 7291-3:2010) and Copper pipe (manufactured to BS EN1057:2006). Maximum working pressures and operating temperatures: When used with Polybutylene barrier pipes (manufactured to BS EN 7291-2:2010) and PEX barrier pipes (manufactured to BS EN 7291-3:2010): 12.5 bar, cold water use only. 6.0 bar @ 95°C. When used with copper pipe (manufactured to BS EN1057:2006): 10mm sizes: Maximum working pressure 16.0 bar. Cold water use only. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C. 15-22mm sizes: Maximum working pressure 20.0 bar. Cold water use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C. 28mm size added April 2024: Maximum working pressure 20.0 bar. Cold water use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240204043
Size:: See models.
Marking:: Fittings: Sharkbite (brand of Reliance Worldwide Corporation (UK) Ltd.), Sharkbite logo, CR, size and SXXXX (where XXXX = date of manufacture WWYY). Pipe: John Guest logo (brand of Reliance Worldwide Corporation (UK) Ltd.), material type, class, size, pressure, temperature and means of identification including date of manufacture (WWYY/xxxx/xxxx). Pipe inserts: John Guest logo (brand of Reliance Worldwide Corporation (UK) Ltd.).
Installation Requirements:: R001
Expiry date:: 28/02/2029
Model:: SHARKBITE EQUAL STRAIGHT COUPLINGS: SB0110: 10mm SB0115: 15mm SB0122: 22mm SB0128: 28mm SHARKBITE REDUCING STRAIGHT COUPLING: SB011510: 15mm x 10mm SB012215: 22mm x 15mm SB012822: 28mm x 22mm SHARKBITE SLIP COUPLING: SB0115S: 15mm SB0122S: 22mm SB0128S: 28mm SHARKBITE 90° EQUAL ELBOW: SB0210: 10mm SB0215: 15mm SB0222: 22mm SB0228: 28mm SHARKBITE 45° EQUAL ELBOW: SB0515: 15mm SB0522: 22mm SB0528: 28mm SHARKBITE 90° STREET ELBOW: SB0215ST: 15mm SB0222ST: 22mm SB0228ST: 28mm SHARKBITE 45° STREET ELBOW: SB0515ST: 15mm SB0522ST: 22mm SB0528ST: 28mm SHARKBITE 90° MALE ELBOW: SB121515M: 15mm SB122220M: 22mm SHARKBITE 90° FEMALE ELBOW: SB121515F: 15mm x 1/2” BSP SHARKBITE 90° FEMALE ELBOW WITH BACK PLATE: SB121515FBP: 15mm x 1/2” BSP SHARKBITE EQUAL TEE: SB0310: 10mm SB0315: 15mm SB0322: 22mm SB0328: 28mm SHARKBITE SLIP TEE: SB0315S: 15mm SB0322S: 22mm SB0328S: 28mm SHARKBITE FEMALE BRANCH TEE: SB03151515F: 15mm x 15mm x 1/2” BSP SHARKBITE REDUCED BRANCH TEE: SB03222210: 22mm x 22mm x 10mm SB03222215: 22mm x 22mm x 15mm SB03282815: 28mm x 28mm x 15mm SB03282822: 28mm x 28mm x 22mm SHARKBITE REDUCED RUN TEE: SB03221522: 22mm x 15mm x 22mm SHARKBITE REDUCED RUN AND BRANCH TEE: SB03221515: 22mm x 15mm x 15mm SB03282222: 28mm x 22mm x 22mm SHARKBITE MALE CONNECTOR TAPERED THREAD: SB111515MT: 15mm x 1/2” BSPT SB112220MT: 22mm x 3/4” BSPT SB112825MT: 28mm x 1” BSPT SHARKBITE MALE CONNECTOR PARALLEL THREAD: SB111515MP: 15mm x 1/2” BSP SB112220MP: 22mm x 3/4” BSP SB112825MP: 28mm x 1” BSP SHARKBITE MALE TANK CONNECTOR PARALLEL THREAD: SB111515MTC: 15mm x 1/2” BSP SB112220MTC: 22mm x 3/4” BSP SHARKBITE FEMALE CONNECTOR PARALLEL THREAD: SB111515F: 15mm x 1/2” BSP SB112220F: 22mm x 3/4” BSP SB112825F: 28mm x 1” BSP SHARKBITE TAP CONNECTORS: SB141515: 15mm x 1/2” BSP SB142220: 22mm x 3/4” BSP SHARKBITE TAP CONNECTOR ELBOW: SB141515E: 15mm x 1/2” BSP SHARKBITE END STOP: SB0410: 10mm SB0415: 15mm SB0422: 22mm SB0428: 28mm SHARKBITE STRAIGHT REDUCING TAILS: SB211510: 15mm x 10mm SB212215: 22mm x 15mm SB212815: 28mm x 15mm SB212822: 28mm x 22mm SHARKBITE SINGLE BRANCH MANIFOLD TEE: SB01221022ST: 22mm x 22mm x 10mm SHARKBITE DOUBLE BRANCH MANIFOLD TEE: SB0122101022ST: 22mm x 22mm x 10mm x 10mm
PIPE INSERTS: TSM10N: 10mm TSM15N: 15mm TSM22N: 22mm TSM28N: 28mm WHITE POLYBUTYLENE BARRIER PIPE (COILS ONLY): 10BPB-25C: 10mm x 25M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 10BPB-50C: 10mm x 50M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 10BPB-100C: 10mm x 100M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-25C: 15mm x 25M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-50C: 15mm x 50M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-85C: 15mm x 85M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-100C: 15mm x 100M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-120C: 15mm x 120M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-150C: 15mm x 150M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-300C: 15mm x 300M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 22BPB-25C: 22mm x 25M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 22BPB-50C: 22mm x 50M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 28BPB-50C: 28mm x 50M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE WHITE PEX BARRIER PIPE (COILS): 10BPEX-25C: 10mm x 25M COIL WHITE PEX BARRIER PIPE 10BPEX-50C: 10mm x 50M COIL WHITE PEX BARRIER PIPE 10BPEX-100C: 10mm x 100M COIL WHITE PEX BARRIER PIPE 15BPEX-25C: 15mm x 25M COIL WHITE PEX BARRIER PIPE 15BPEX-50C: 15mm x 50M COIL WHITE PEX BARRIER PIPE 15BPEX-100C: 15mm x 100M COIL WHITE PEX BARRIER PIPE 15BPEX-120C: 15mm x 120M COIL WHITE PEX BARRIER PIPE 15BPEX-150C: 15mm x 150M COIL WHITE PEX BARRIER PIPE 22BPEX-25C: 22mm x 25M COIL WHITE PEX BARRIER PIPE 22BPEX-50C: 22mm x 50M COIL WHITE PEX BARRIER PIPE WHITE PEX BARRIER PIPE (LENGTHS): 15BPEX-20X2L: 15mm x 2M LENGTHS WHITE PEX BARRIER PIPE 15BPEX-20X3L: 15mm x 3M LENGTHS WHITE PEX BARRIER PIPE 15BPEX-20X6L: 15mm x 6M LENGTHS WHITE PEX BARRIER PIPE 22BPEX-20X2L: 22mm x 2M LENGTHS WHITE PEX BARRIER PIPE 22BPEX-20X3L: 22mm x 3M LENGTHS WHITE PEX BARRIER PIPE 22BPEX-20X6L: 22mm x 6M LENGTHS WHITE PEX BARRIER PIPE 28BPEX-10X3L: 28mm x 3M LENGTHS WHITE PEX BARRIER PIPE 28BPEX-10X6L: 28mm x 6M LENGTHS WHITE PEX BARRIER PIPE

Product Images

Approval Holder:: RELIANCE WORLDWIDE CORPORATION (UK) LTD

Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

WRAS Approval Number: #240202059

Range of Redman fittings with mild steel bodies (polyamide coating) for use with Puriton II PE-AL-PE barrier pipe - For above and below ground and cold-water use. Jointing is achieved by hydraulic compression. Maximum working pressures: 12.5 Bar for 63mm SDR 11 PE80 pipe system, 10.0 Bar for 90mm to 180mm SDR 17 PE100 pipe system, 16.0 bar for 90mm to 180mm SDR 11 PE100 pipe system. Cold water use only.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240202059
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model list below;
Marking:: Radius logo, Size, Part number and batch code on outer shell. Radius logo, size on adhesive label on body.
Installation Requirements:: R001
Expiry date:: 28/02/2029
Model:: Maximum working pressure 10.0 bar: Coupler comprising outer shell & straight insert for SDR 17 Pipe: RE0009: 90mm SDR 17 REDMAN Coupler, RE0010: 110mm SDR 17 REDMAN Coupler, RE0005: 125mm SDR 17 REDMAN Coupler, RE0007: 160mm SDR 17 REDMAN Coupler, RE0047: 180mm SDR 17 REDMAN Coupler. Coupler comprising 2 outer half shells and straight insert for SDR 17 Pipe: RE0067: 90mm SDR 17 REDMAN Repair Coupler, RE0069: 110mm SDR 17 REDMAN Repair Coupler, RE0071: 125mm SDR 17 REDMAN Repair Coupler, RE0078: 160mm SDR 17 REDMAN Repair Coupler, RE0080: 180mm SDR 17 REDMAN Repair Coupler. 45° bend comprising 2 outer half shells and 45° insert for SDR 17 Pipe: RE0034: 90mm SDR 17 REDMAN 45° Elbow, RE0036: 110mm SDR 17 REDMAN 45° Elbow, RE0038: 125mm SDR 17 REDMAN 45° Elbow, RE0040: 160mm SDR 17 REDMAN 45° Elbow, RE0045: 180mm SDR 17 REDMAN 45° Elbow. 90° bend comprising 2 outer half shells and 90° insert for SDR 17 Pipe: RE0013: 90mm SDR 17 REDMAN 90° Elbow, RE0015: 110mm SDR 17 REDMAN 90° Elbow, RE0017: 125mm SDR 17 REDMAN 90° Elbow, RE0019: 160mm SDR 17 REDMAN 90° Elbow, RE0021: 180mm SDR 17 REDMAN 90° Elbow, Flange Adaptor comprising outer shell and DN flanged insert for SDR 17 pipe EN1092 NP16 drilling: RE0075: 90mm x DN80 SDR 17 REDMAN Flange Adaptor, RE0077: 110mm x DN100 SDR 17 REDMAN Flange Adaptor, RE0079: 125mm x DN100 SDR 17 REDMAN Flange Adaptor, RE0081: 160mm x DN150 SDR 17 REDMAN Flange Adaptor, RE0089: 180mm x DN150 SDR 17 REDMAN Flange Adaptor. Maximum working pressure 16.0 bar: Coupler comprising outer shell & straight insert for SDR 11 Pipe: RE0002: 90mm SDR 11 REDMAN Coupler, RE0003: 110mm SDR 11 REDMAN Coupler, RE0004: 125mm SDR 11 REDMAN Coupler, RE0008: 180mm SDR 11 REDMAN Coupler. Coupler comprising 2 outer half shells and straight insert for SDR 11 Pipe: RE0064: 90mm SDR 11 REDMAN Repair Coupler, RE0066: 110mm SDR 11 REDMAN Repair Coupler. 45° bend comprising 2 outer half shells and 45° insert for SDR 11 Pipe: RE0033: 90mm SDR 11 REDMAN 45° Elbow, RE0035: 110mm SDR 11 REDMAN 45° Elbow. 90° bend comprising 2 outer half shells and 90° insert for SDR 11 Pipe: RE0012: 90mm SDR 11 REDMAN 90° Elbow, RE0014: 110mm SDR 11 REDMAN 90° Elbow. Flange Adaptor comprising outer shell and DN flanged insert for SDR 11 pipe EN1092 NP16 drilling: RE0074: 90mm x DN80 SDR 11 REDMAN Flange Adaptor, RE0076: 110mm x DN100 SDR 11 REDMAN Flange Adaptor, RE0084: 125mm x DN100 SDR 11 REDMAN Flange Adaptor, RE0087: 180mm x DN150 SDR 11 REDMAN Flange Adaptor Models added July 2024: RE0001 63mm REDMAN Coupler SDR 11, RE0065 63mm REDMAN Repair Coupler SDR 11, RE0032 63mm REDMAN Elbow 45° SDR11, RE0011 63mm REDMAN Elbow 90° SDR 11, RE0073 63 x dn50 REDMAN Flange Adaptor SDR 11, RE0083 63mm x dn80 REDMAN Flange adaptor SDR11.

Product Images

Approval Holder:: Radius Systems Limited

Company Name
Radius Systems Limited
Address
Radius House, Berristow Lane, South Normanton, Alfreton, Derbyshire
Postcode
DE55 2JJ
Country
United Kingdom
Phone
01773582303
General Email
richard.marks@radius-systems.com

View All Listings by this Company
Manufacturer:: Radius (China) Piping Systems Company Limited.

Company Name
Radius (China) Piping Systems Company Limited.
Address
53 Huihe Road Dongying Economic and Technological Development Zone Shandong Province
Country
China
General Email

View All Listings by this Company

WRAS Approval Number: #240404712

IDC ‘BDGxxx’ range of press fittings with brass or nickel plated brass bodies (see model) incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). The BDG241 and BDG257 prefix models incorporate an EPDM gasket on the captive nut end connection. Pressfit jointing is achieved by either a U or TH crimping profile. Compression connections are for use with copper pipe 12-28mm (manufactured to EN1057) or Irish copper pipe 14.7-27.4mm (manufactured to EN1057). For above ground use only. Maximum working pressure 10.0 bar. 20, 25 & 26mm pressfit sizes cold water use only. Threaded, compression and 16 & 32mm pressfit sizes maximum operating temperature 95°C. From June 2025: The 20, 25 & 26mm pressfit sizes (TH profile only) maximum operating temperature 95°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240404712
Size:: Pressfit: 16, 20, 25, 26 & 32mm. Compression: 12mm, 14.7mm, 15mm, 18mm, 21mm, 22mm, 27.4mm & 28mm. Threaded: ⅜”, ½”, ¾” & 1” BSP (M)/(F) or captive nut.
Marking:: IDC logo: E mark (~E~ within circle), profile type (U or TH), size and PN on fitting body.
Installation Requirements:: R001
Expiry date:: 30/04/2029
Model:: Models include a suffix to denote profile and whether brass or nickel plated. -U = brass with U profile. -TH = brass with TH profile. -P-U = nickel plated brass with U profile. -P-TH = nickel plated with TH profile. BDG245 - Straight PEX x PEX (press x press): BDG2450101: 16mm x 16mm, BDG2450301: 20mm x 20mm, BDG2450401: 25mm x 25mm, BDG2450501: 26mm x 26mm, BDG2450601: 32mm x 32mm. BDG244 - Reduce Straight PEX x PEX (press x press): BDG2440101: 20mm x 16mm, BDG2440201: 25mm x 16mm, BDG2440301: 26mm x 16mm, BDG2440601: 25mm x 20mm, BDG2440701: 26mm x 20mm, BDG2440800: 32mm x 16mm, BDG2440702: 32mm x 20mm, BDG2440802: 32mm x 26mm. BDG242 - Straight PEX x Male (press x male): BDG2420101: 16mm x 3/8"M, BDG2420201: 16mm x 1/2"M, BDG2420202: 16mm x 3/4"M, BDG2420501: 20mm x 1/2"M, BDG2420601: 20mm x 3/4"M, BDG2420602: 20mm x 1"M, BDG2420701: 25mm x 3/4"M, BDG2420702: 25mm x 1"M, BDG2420802: 26mm x 1/2"M, BDG2420803: 26mm x 3/4"M, BDG2420804: 26mm x 1"M, BDG2420900: 32mm x 3/4"M, BDG2420901: 32mm x 1"M. BDG243 - Straight PEX x Female (press x female): BDG2430100: 16mm x 3/8"F, BDG2430101: 16mm x 1/2"F, BDG2430102: 16mm x 3/4"F, BDG2430301: 20mm x 1/2"F, BDG2430401: 20mm x 3/4"F, BDG2430402: 20mm x 1"F, BDG2430501: 25mm x 3/4"F, BDG2430601: 25mm x 1"F, BDG2430701: 26mm x 3/4"F, BDG2430801: 26mm x 1"F, BDG2430901: 32mm x 1"F. BDG246 - Stop end (press): BDG246001: 16mm, BDG246003: 20mm, BDG246004: 25mm, BDG246005: 26mm, BDG246006: 32mm. BDG253 - Straight Compression x PEX (compression x press): BDG2530400: 12mmC x 16mm, BDG2530401: 15mmC x 16mm, BDG2530403: 15mmC x 20mm, BDG2530503: 18mmC x 20mm, BDG2530504: 18mmC x 25mm, BDG2530603: 22mmC x 20mm, BDG2530803: 28mmC x 20mm, BDG2530804: 28mmC x 25mm, BDG2530805: 28mmC x 26mm, BDG2530806: 28mmC x 32mm, BDG2531401: 1/2"C x 16mm, BDG2531603: 3/4"C x 20mm, BDG2531605: 3/4"C x 26mm, BDG2531805: 1"C x 26mm, BDG2531806: 1"C x 32mm. BDG241 - Tap connector PEX x Swivel Female (press x captive nut female): BDG2410101: 16 x 3/8"F, BDG2410201: 16 x 1/2"F, BDG2410202: 16 x 3/4"F, BDG2410501: 20 x 1/2"F, BDG2410601: 20 x 3/4"F, BDG2410701: 25 x 3/4"F, BDG2410801: 25 x 1"F, BDG2410803: 26 x 3/4"F, BDG2410804: 26 x 1"F, BDG2410901: 32 x 1"F. BDG249 - Elbow (press): BDG2490101: 16mm, BDG2490201: 20mm, BDG2490301: 25mm, BDG2490401: 26mm, BDG2490501: 32mm. BDG449 - Elbow 45° (press): BDG4490301: 25mm, BDG4490401: 26mm, BDG4490501: 32mm. BDG256 - Elbow PEX x Male (press x male): BDG2560103: 16mm x 3/8"M, BDG2560104: 16mm x 1/2"M, BDG2560106: 16mm x 3/4"M, BDG2560304: 20mm x 1/2"M, BDG2560306: 20mm x 3/4"M, BDG2560308: 20mm x 1"M, BDG2560406: 25mm x 3/4"M, BDG2560408: 25mm x 1"M, BDG2560506: 26mm x 3/4"M, BDG2560508: 26mm x 1"M, BDG2560608: 32mm x 1"M. BDG247 - Elbow PEX x Female (press x female): BDG2470100: 16mm x 3/8"F, BDG2470101: 16mm x 1/2"F, BDG2470102: 16mm x 3/4"F, BDG2470301: 20mm x 1/2"F, BDG2470302: 20mm x 3/4"F, BDG2470303: 20mm x 1"F, BDG2470401: 25mm x 3/4”F, BDG2470402: 25mm x 1”F, BDG2470501: 26mm x 3/4"F, BDG2470502: 26mm x 1"F, BDG2470600: 32mm x 3/4"F, BDG2470601: 32mm x 1"F. BDG248 - Wall Plate PEX x Female (press x female): BDG2480101: 16 x 1/2"F, BDG2480301: 20 x 1/2"F, BDG2480401: 20 x 3/4"F, BDG2480402: 25x 3/4"F, BDG2480403: 25 x 1"F, BDG2480501: 26 x 3/4"F, BDG2480502: 26 x 1"F. BDG257 - Elbow Tap connector PEX x Swivel Female (press x captive nut female): BDG2570103: 16 x 3/8"F, BDG2570104: 16 x 1/2"F, BDG2570106: 16 x 3/4"F, BDG2570304: 20 x 1/2"F, BDG2570306: 20 x 3/4"F, BDG2570401: 25 x 3/4"F, BDG2570402: 25 x 1"F, BDG2570506: 26 x 3/4"F, BDG2570508: 26 x 1"F, BDG2570608: 32 x 1"F. BDG255 - Equal Tee (press): BDG2550101: 16mm, BDG2550301: 20mm, BDG2550401: 25mm, BDG2550501: 26mm, BDG2550601: 32mm. BDG254 - Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): BDG2540101: 16 x 20 x 16, BDG2541001: 20 x 16 x 16, BDG2541101: 20 x 16 x 20, BDG2541201: 20 x 20 x 16, BDG2541202: 20 x 26 x 16, BDG2541402: 20 x 26 x 20, BDG2541403: 20 x 32 x 32, BDG2541501: 25 x 16 x 16, BDG2541601: 25 x 16 x 20, BDG2541701: 25 x 16 x 25, BDG2541801: 25 x 20 x 16, BDG2541901: 25 x 20 x 20, BDG2542001: 25 x 20 x 25, BDG2542101: 25 x 25 x 20, BDG2541300: 26 x 16 x 16, BDG2542300: 26 x 16 x 20, BDG2542500: 26 x 20 x 16, BDG2542301: 26 x 16 x 26, BDG2542401: 26 x 20 x 20, BDG2542501: 26 x 20 x 26, BDG2542502: 26 x 26 x 16, BDG2542503: 26 x 26 x 20, BDG2542800: 32 x 20 x 26, BDG2542602: 32 x 32 x 26, BDG2542504: 26 x 32 x 26, BDG2542802: 32 x 32 x 20, BDG2542803: 32 x 16 x 32, BDG2542801: 32 x 20 x 32, BDG2542601: 32 x 26 x 26, BDG2542701: 32 x 26 x 32. BDG250 - Reduce Tee PEX(Left) x PEX(Right) x Male(Middle) (press x male x press): BDG2500101: 16 x 1/2"M x 16, BDG2500301: 20 x 1/2"M x 20, BDG2500302: 20 x 3/4"M x 20, BDG2500401: 25 x 3/4"M x 25, BDG2500402: 25 x 1"M x 25, BDG2500500: 26 x 1/2"M x 26, BDG2500501: 26 x 3/4"M x 26, BDG2500502: 26 x 1"M x 26, BDG2500600: 32 x 1/2"M x 32, BDG2500601: 32 x 3/4"M x 32, BDG2500701: 32 x 1"M x 32. BDG251 - Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): BDG2510101: 16 x 1/2"F x 16, BDG2510301: 20 x 1/2"F x 20, BDG2510302: 20 x 3/4"F x 20, BDG2510303: 26 x 1/2"F x 26, BDG2510304: 26 x 3/4"F x 20, BDG2510306: 26 x 3/4"F x 26, BDG2510308: 26 x 1"F x 26, BDG2510401: 25x3/4"F x 25, BDG2510402: 25x1"F x 25, BDG2510500: 32 x 1/2"F x 32, BDG2510501: 32 x 3/4"F x 32, BDG2510502: 32 x 1"F x 32.

Product Images

Approval Holder:: IDC Plumbing & Heating Technology (Beijing) Ltd.

Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company
Manufacturer:: IDC FLUID CONTROL CO., LTD.

Company Name
IDC FLUID CONTROL CO., LTD.
Address
Mechanical & Electrical Industrial Zone Yuhuan City Zhejiang Province
Country
China
General Email

View All Listings by this Company

WRAS Approval Number: #2307914

MecFlow Press (PPSU & Brass) Ranges of press fittings for use with MecFlow Press pipes. Maximum working pressure 10.0 bar. The maximum operating temperature is 95oC.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2307914
Size:: 16mm-63mm.
Marking:: Pipe – MecFlow Press, Size, PE-Xb/Al/PE-RT, date of production, made in Germany, operation parameters. Fittings – ‘F’, size, PPSU, production date.
Installation Requirements:: R001 R008
Expiry date:: 31/07/2028
Model:: 8017.16X05B 8017.16X05W 8017.16X075W 8017.20X05.90BW 8017.20X05W 8017.20X075.90BW 8017.20X075B 8017.20X075W 8017.20X1B 8017.26X075.90BW 8017.26X075B 8017.26X1B 8017.32X1.90BW 8017.32X125B 8017.32X1B 8024.20X16W 8024.26X16W 8024.26X20W 8024.32X20W 8024.32X26W 8027.16X15B 8027.20X22B 8004.26X16X26.90W 8004.26X20X16.90W 8004.26X20X20.90W 8004.26X20X26.90W 8004.26X26X16.90W 8004.26X26X20.90W 8004.32.90W 8004.32X16X32.90W 8004.32X20X26.90W 8004.32X20X32.90W 8004.32X26X26.90W 8004.32X26X32.90W 8004R.16.90W 8010.16W 8027.26X22B 8027.32X28B 8030.16W 8030.20W 8030.26W 8030.32W 8046.16X05X16.90BW 8046.20X05X20.90BW 8046.20X075X20.90BW 8046.26X05X26.90BW 8046.26X075X26.90BW 8046.32X05X32.90BW 8046.32X075X32.90BW 8046.32X1X32.90BW 8058.16X05.90BW 8058.16X05BW 8058.16X075.90BW 8058.16X075BW 8058.20X075.90BW 8058.20X075BW 8058.20X1BW 8000.16.50W 8000.20.50W 8000.26.50W 8000.32.50W 8000C.16.1000W 8000C.20.1000W 8000C.26.500W 8000C.32.500W 8058.26X075BW 8058.26X1.90BW 8058.26X125BW 8058.26X15BW 8058.26X1BW 8058.32X125BW 8058.32X15BW 8058.32X1BW 8001.16.90W 8001.20.90W 8010.20W 8010.26W 8010.32W 8015.16X05.35.90BW 8015.20X05.35.90BW 8015.20X075.35.90BW 8015.26X075.35.90BW 8001.26.45W 8001.26.90W 8001.32.45W 8001.32.90W 8001R.16.90W 8004.16.90W 8004.16X20X16.90W 8004.20.90W 8004.20X16X16.90W 8004.20X16X20.90W 8004.20X20X16.90W 8004.20X26X20.90W 8004.26.90W 8004.26X16X20.90W 8016.16X05.90BW 8016.16X05B 8016.20X05.90BW 8016.20X05B 8016.20X075.90BW 8016.20X075B 8016.26X075.90BW 8016.26X075B 8016.26X1B 8016.32X1.90BW 8016.32X125B 8016.32X1B 8017.16X05.90BW alpex duo XS - Multilayer metal PE-Xb/Al/PE-RT pipe (DN16, 20, 26, 32), alpex L - Multilayer metal PE-Xb/Al/PE-RT pipe (DN40, 50,63), alpex duo XS - Press fittings made of brass and PPSU (DN16, 20, 26, 32), alpex L - Press fittings made of brass and PPSU (DN40, 50, 63).

Approval Holder:: Polypipe Building Services

Company Name
Polypipe Building Services
Address
New Hythe Business Park, College Road, Aylesford, Kent
Postcode
ME20 7PJ

View All Listings by this Company
Manufacturer:: Frankische Rohrwerke Gebr Kirchner GmbH & C0 KG

Company Name
Frankische Rohrwerke Gebr Kirchner GmbH & C0 KG
Address
Hellinger Strasse 1, D-97438 Konigsberg, Germany

View All Listings by this Company

WRAS Approval Number: #2101375

"Yi Sin" Range of press fittings with a stainless steel body and EPDM ‘O’ rings for use with stainless steel 316L pipe manufactured to EN10312. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2101375
Size:: see model
Marking:: Yi Sin (Trademark of Bing-Fu) and size on body.
Installation Requirements:: R001
Expiry date:: 31/01/2026
Model:: Y-S615 Equal coupling 15mm Y-S618 Equal coupling 18mm Y-S622 Equal coupling 22mm Y-S628 Equal coupling 28mm Y-S635 Equal coupling 35mm Y-S642 Equal coupling 42mm Y-S654 Equal coupling 54mm Y-BS615 Adjustable coupling 15mm Y-BS618 Adjustable coupling 18mm Y-BS622 Adjustable coupling 22mm Y-BS628 Adjustable coupling 28mm Y-BS635 Adjustable coupling 35mm Y-BS642 Adjustable coupling 42mm Y-BS654 Adjustable coupling 54mm Y-90E615 90° equal elbow 15mm Y-90E618 90° equal elbow 18mm Y-90E622 90° equal elbow 22mm Y-90E628 90° equal elbow 28mm Y-90E635 90° equal elbow 35mm Y-90E642 90° equal elbow 42mm Y-90E654 90° equal elbow 54mm Y-90EB615 90° plain elbow‐B 15mm Y-90EB618 90° plain elbow‐B 18mm Y-90EB622 90° plain elbow‐B 22mm Y-90EB628 90° plain elbow‐B 28mm Y-90EB635 90° plain elbow‐B 35mm Y-90EB642 90° plain elbow‐B 42mm Y-90EB654 90° plain elbow‐B 54mm Y-45E615 45° equal elbow 15mm Y-45E618 45° equal elbow 18mm Y-45E622 45° equal elbow 22mm Y-45E628 45° equal elbow 28mm Y-45E635 45° equal elbow 35mm Y-45E642 45° equal elbow 42mm Y-45E654 45° equal elbow 54mm Y-45EB615 45° plain elbow‐B 15mm Y-45EB618 45° plain elbow‐B 18mm Y-45EB622 45° plain elbow‐B 22mm Y-45EB628 45° plain elbow‐B 28mm Y-45EB635 45° plain elbow‐B 35mm Y-45EB642 45° plain elbow‐B 42mm Y-45EB654 45° plain elbow‐B 54mm Y-3T615 Equal tee 15mm Y-3T618 Equal tee 18mm Y-3T622 Equal tee 22mm Y-3T628 Equal tee 28mm Y-3T635 Equal tee 35mm Y-3T642 Equal tee 42mm Y-3T654 Equal tee 54mm Y-3TR61815 Reducing tee 18mm×15mm Y-3TR62215 Reducing tee 22mm×15mm Y-3TR62218 Reducing tee 22mm×18mm Y-3TR62815 Reducing tee 28mm×15mm Y-3TR62818 Reducing tee 28mm×18mm Y-3TR62822 Reducing tee 28mm×22mm Y-3TR63515 Reducing tee 35mm×15mm Y-3TR63518 Reducing tee 35mm×18mm Y-3TR63522 Reducing tee 35mm×22mm Y-3TR63528 Reducing tee 35mm×28mm Y-3TR64215 Reducing tee 42mm×15mm Y-3TR64218 Reducing tee 42mm×18mm Y-3TR64222 Reducing tee 42mm×22mm Y-3TR64228 Reducing tee 42mm×28mm Y-3TR64235 Reducing tee 42mm×35mm Y-3TR65415 Reducing tee 54mm×15mm Y-3TR65418 Reducing tee 54mm×18mm Y-3TR65422 Reducing tee 54mm×22mm Y-3TR65428 Reducing tee 54mm×28mm Y-3TR65435 Reducing tee 54mm×35mm Y-3TR65442 Reducing tee 54mm×42mm Y-SS61512 Female coupling 15mm×Rp1/2’’ Y-SS62234 Female coupling 22mm×Rp3/4” Y-SS6281 Female coupling 28mm×Rp1” Y-SS635114 Female coupling 35mm×Rp1‐“1/4” Y-SS642112 Female coupling 42mm×Rp1‐1/2” Y-SS6542 Female coupling 54mm×Rp2” Y-MU61512 Rotatable coupling 15mm×G1/2” Y-MU61812 Rotatable coupling 18mm×G1/2” Y-MU62234 Rotatable coupling 22mm×G3/4” Y-MU6281 Rotatable coupling 28mm×G1” Y-MU635114 Rotatable coupling 35mm×G1‐1/4” Y-MU642112 Rotatable coupling 42mm×G1‐1/2” Y-MU6542 Rotatable coupling 54mm×G2” Y-SM61512 Male coupling 15mm×12” Y-SM61812 Male coupling 18mm×12” Y-SM62234 Male coupling 22mm×R3/4” Y-SM6281 Male coupling 28mm×R1” Y-SM635114 Male coupling 35mm×R1‐1/4” Y-SM642112 Male coupling 42mm×R1‐1/2” Y-SM6542 Male coupling 54mm×R2” Y-90SEL61512 Female elbow 15mm×Rp1/2” Y-90SEL61812 Female elbow 18mm×Rp1/2” Y-90SEL62234 Female elbow 22mm×Rp3/4” Y-90SEL6281 Female elbow 28mm×Rp1” Y-90SEL635114 Female elbow 35mm×Rp1‐1/4” Y-90SEL642112 Female elbow 42mm×Rp1‐1/2” Y-90SEL6542 Female elbow 54mm×Rp2” Y-90EM61512 Male elbow 15mm×12” Y-90EM61812 Male elbow 18mm×12” Y-90EM62212 Male elbow 22mm×12” Y-90EM62234 Male elbow 22mm×R3/4” Y-90EM6281 Male elbow 28mm×R1” Y-90EM635114 Male elbow 35mm×R1‐1/4” Y-90EM642112 Male elbow 42mm×R1‐1/2” Y-90EM6542 Male elbow 54mm×R2” Y-3TF61512 Female tee 15mm×Rp1/2” Y-3TF61812 Female tee 18mm×Rp1/2” Y-3TF62234 Female tee 22mm×Rp3/4” Y-3TF62812 Female tee 28mm×Rp1/2 Y-3TF6281 Female tee 28mm×Rp1” Y-3TF635114 Female tee 35mm×Rp1‐1/4” Y-3TF642112 Female tee 42mm×Rp1‐1/2” Y-3TF6542 Female tee 54mm×Rp2” Y-3MF61512 Male tee 15mm×12” Y-3MF61812 Male tee 18mm×12” Y-3MF62234 Male tee 22mm×R3/4” Y-3MF62812 Male tee 28 mm×12’’ Y-3MF6281 Male tee 28mm×R1” Y-3MF635114 Male tee 35mm×R1‐1/4” Y-3MF642112 Male tee 42mm×R1‐1/2” Y-3MF6542 Male tee 54mm×R2” Y-RS61815 Reducer‐A 18mm×15mm Y-RS62215 Reducer‐A 22mm×15mm Y-RS62218 Reducer‐A 22mm×18mm Y-RS62815 Reducer‐A 28mm×15mm Y-RS62818 Reducer‐A 28mm×18mm Y-RS62822 Reducer‐A 28mm×22mm Y-RS63515 Reducer‐A 35mm×15mm Y-RS63518 Reducer‐A 35mm×18mm Y-RS63522 Reducer‐A 35mm×22mm Y-RS63528 Reducer‐A 35mm×28mm Y-RS64215 Reducer‐A 42mm×15mm Y-RS64218 Reducer‐A 42mm×18mm Y-RS64222 Reducer‐A 42mm×22mm Y-RS64228 Reducer‐A 42mm×28mm Y-RS64235 Reducer‐A 42mm×35mm Y-RS65442 Reducer‐A 54mm×42mm Y-RSB61815 Reducer Coupling‐B 18mm×15mm Y-RSB62215 Reducer Coupling‐B 22mm×15mm Y-RSB62218 Reducer Coupling‐B 22mm×18mm Y-RSB62815 Reducer Coupling‐B 28mm×15mm Y-RSB62818 Reducer Coupling‐B 28mm×18mm Y-RSB62822 Reducer Coupling‐B 28mm×22mm Y-RSB63515 Reducer Coupling‐B 35mm×15mm Y-RSB63518 Reducer Coupling‐B 35mm×18mm Y-RSB63522 Reducer Coupling‐B 35mm×22mm Y-RSB63528 Reducer Coupling‐B 35mm×28mm Y-RSB64215 Reducer Coupling‐B 42mm×15mm Y-RSB64218 Reducer Coupling‐B 42mm×18mm Y-RSB64222 Reducer Coupling‐B 42mm×22mm Y-RSB64228 Reducer Coupling‐B 42mm×28mm Y-RSB64235 Reducer Coupling‐B 42mm×35mm Y-RSB65415 Reducer Coupling‐B 54mm×15mm Y-RSB65418 Reducer Coupling‐B 54mm×18mm Y-RSB65422 Reducer Coupling‐B 54mm×22mm Y-RSB65428 Reducer Coupling‐B 54mm×28mm Y-RSB65435 Reducer Coupling‐B 54mm×35mm Y-RSB65442 Reducer Coupling‐B

Approval Holder:: BING - FU Enterprise Co.Ltd

Company Name
BING - FU Enterprise Co.Ltd
Address
NO. 5, ALY. 60, LN. 407, RENXIAO RD., RENWU DIST., KAOHSIUNG CITY 814025
Country
Taiwan

View All Listings by this Company

WRAS Approval Number: #240504707

Universal plastic compression adaptor kits for use with SAB A16 fitting body (not included as part of this approval) and galvanised steel pipe (manufactured to EN 10255). Maximum working pressure 16 bar. Cold water use only.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240504707
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: When used with galvanised pipe and for wholesome water consult your local water company.
Size:: ½” BSP M.
Marking:: SAB, SAB logo, nominal size range moulded on nut
Installation Requirements:: R001
Expiry date:: 31/05/2029
Model:: S16 UF Kit Universal conversion Kit Ø15-21, model U139000015.

Product Images

Approval Holder:: Sab SpA

Company Name
Sab SpA
Address
Via Salvo D'acquiso, 61048 Sant'Angelo In Vado (PU)
Country
Italy

View All Listings by this Company
Manufacturer:: Sab SpA

Company Name
Sab SpA
Address
Via Salvo D'acquiso, 61048 Sant'Angelo In Vado (PU)
Country
Italy

View All Listings by this Company

WRAS Approval Number: #240604008

Range of M profile brass press fittings with EPDM ‘O’-rings or gaskets to be used with copper pipe manufactured to EN1057 for above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240604008
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: see model
Marking:: Hailiang & size on body
Installation Requirements:: R001
Expiry date:: 30/06/2029
Model:: EKYA00103 MALE CONNECTOR CXM - 15mmxR 1/2 EKYA00157 MALE CONNECTOR CXM - 15mmxR 3/4 EKYA00115 MALE CONNECTOR CXM - 22mmxR 1/2 EKYA00104 MALE CONNECTOR CXM - 22mmxR 3/4 EKYA00116 MALE CONNECTOR CXM - 22mmxR 1 EKYA00117 MALE CONNECTOR CXM - 28mmxR 3/4 EKYA00105 MALE CONNECTOR CXM - 28mmxR 1 EKYA00118 MALE CONNECTOR CXM - 35mmxR 1 EKYA00106 MALE CONNECTOR CXM - 35mmxR 1 1/4 EKYA00107 MALE CONNECTOR CXM - 42mmxR 1 1/2 EKYA00108 MALE CONNECTOR CXM - 54mmxR 2 EKYA00109 MALE CONNECTOR CXM - 66.7mmxR 2 1/2 EKYA00110 MALE CONNECTOR CXM - 76.1mmxR 2 1/2 EKYA00111 MALE CONNECTOR CXM - 76.1mmxR 3 EKYA00303 FEMALE CONNECTOR CXF - 15mmxRp 1/2 EKYA00357 FEMALE CONNECTOR CXF - 15mmxRp 3/4 EKYA00315 FEMALE CONNECTOR CXF - 22mmxRp 1/2 EKYA00304 FEMALE CONNECTOR CXF - 22mmxRp 3/4 EKYA00316 FEMALE CONNECTOR CXF - 22mmxRp 1 EKYA00317 FEMALE CONNECTOR CXF - 28mmxRp 3/4 EKYA00305 FEMALE CONNECTOR CXF - 28mmxRp 1 EKYA00318 FEMALE CONNECTOR CXF - 35mmxRp 1 EKYA00306 FEMALE CONNECTOR CXF - 35mmxRp 1 1/4 EKYA00307 FEMALE CONNECTOR CXF - 42mmxRp 1 1/2 EKYA00308 FEMALE CONNECTOR CXF - 54mmxRp 2 EKYA00309 FEMALE CONNECTOR CXF - 66.7mmxRp 2 1/2 EKYA00310 FEMALE CONNECTOR CXF - 76.1mmxRp 2 1/2 EKYA00311 FEMALE CONNECTOR CXF - 76.1mmxRp 3 EKYA10103 MALE ELBOW CXM - 15mmxR 1/2 EKYA10104 MALE ELBOW CXM - 22mmxR 3/4 EKYA10105 MALE ELBOW CXM - 28mmxR 1 EKYA10106 MALE ELBOW CXM - 35mmxR 1 1/4 EKYA10107 MALE ELBOW CXM - 42mmxR 1 1/2 EKYA10108 MALE ELBOW CXM - 54mmxR 2 EKYA10303 FEMALE ELBOW CXF - 15mmxRp 1/2 EKYA10304 FEMALE ELBOW CXF - 22mmxRp 3/4 EKYA10305 FEMALE ELBOW CXF - 28mmxRp 1 EKYA10306 FEMALE ELBOW CXF - 35mmxRp 1 1/4 EKYA10307 FEMALE ELBOW CXF - 42mmxRp 1 1/2 EKYA10308 FEMALE ELBOW CXF - 54mmxRp 2 EKYA10803 WALLPLATE ELBOW - 15mmxRp 1/2 EKYA10804 WALLPLATE ELBOW - 22mmxRp ¾ EKYA01003 UNION COUPLING CXC - 15mm EKYA01004 UNION COUPLING CXC - 22mm EKYA01005 UNION COUPLING CXC - 28mm EKYA01006 UNION COUPLING CXC - 35mm EKYA01007 UNION COUPLING CXC - 42mm EKYA01008 UNION COUPLING CXC - 54mm EKYA20303 FEMALE TEE CXCXF - 15mmx15mmxRp 1/2 EKYA20315 FEMALE TEE CXCXF - 22mmx22mmxRp 1/2 EKYA20304 FEMALE TEE CXCXF - 22mmx22mmxRp 3/4 EKYA20316 FEMALE TEE CXCXF - 28mmx28mmxRp 1/2 EKYA20317 FEMALE TEE CXCXF - 28mmx28mmxRp 3/4 EKYA20305 FEMALE TEE CXCXF - 28mmx28mmxRp 1 EKYA20318 FEMALE TEE CXCXF - 35mmx35mmxRp 1/2 EKYA20319 FEMALE TEE CXCXF - 35mmx35mmxRp 3/4 EKYA20320 FEMALE TEE CXCXF - 35mmx35mmxRp 1 EKYA20306 FEMALE TEE CXCXF - 35mmx35mmxRp 1 1/4 EKYA20321 FEMALE TEE CXCXF - 42mmx42mmxRp 1/2 EKYA20322 FEMALE TEE CXCXF - 42mmx42mmxRp 3/4 EKYA20323 FEMALE TEE CXCXF - 42mmx42mmxRp 1 EKYA20307 FEMALE TEE CXCXF - 42mmx42mmxRp 1 1/2 EKYA20324 FEMALE TEE CXCXF - 54mmx54mmxRp 1/2 EKYA20325 FEMALE TEE CXCXF - 54mmx54mmxRp 1 EKYA20308 FEMALE TEE CXCXF - 54mmx54mmxRp 2 EKYA01303 STRAIGHT SWIVEL CONNECTOR CXF - 15mmxG 1/2 EKYA01357 STRAIGHT SWIVEL CONNECTOR CXF - 15mmxG 3/4 EKYA01304 STRAIGHT SWIVEL CONNECTOR CXF - 22mmxG 3/4 EKYA01315 STRAIGHT SWIVEL CONNECTOR CXF - 22mmxG 1 EKYA01316 STRAIGHT SWIVEL CONNECTOR CXF - 28mmxG 1 1/4 EKYA01317 STRAIGHT SWIVEL CONNECTOR CXF - 35mmxG 1 1/2 EKYA01318 STRAIGHT SWIVEL CONNECTOR CXF - 42mmxG 2 EKYA01203 STRAIGHT MALE UNION CXM - 15mmxR 1/2 EKYA01257 STRAIGHT MALE UNION CXM - 15mmxR 3/4 EKYA01215 STRAIGHT MALE UNION CXM - 22mmxR 1/2 EKYA01204 STRAIGHT MALE UNION CXM - 22mmxR 3/4 EKYA01216 STRAIGHT MALE UNION CXM - 22mmxR 1 EKYA01217 STRAIGHT MALE UNION CXM - 28mmxR 3/4 EKYA01205 STRAIGHT MALE UNION CXM - 28mmxR 1 EKYA01206 STRAIGHT MALE UNION CXM - 35mmxR 1 1/4 EKYA01207 STRAIGHT MALE UNION CXM - 42mmxR 1 1/2 EKYA01208 STRAIGHT MALE UNION CXM - 54mmxR 2 EKYA01103 STRAIGHT FEMALE UNION CXF - 15mmxRp 1/2 EKYA01157 STRAIGHT FEMALE UNION CXF - 15mmxRp 3/4 EKYA01115 STRAIGHT FEMALE UNION CXF - 22mmxRp 1/2 EKYA01104 STRAIGHT FEMALE UNION CXF - 22mmxRp 3/4 EKYA01116 STRAIGHT FEMALE UNION CXF - 22mmxRp 1 EKYA01117 STRAIGHT FEMALE UNION CXF - 28mmxRp 3/4 EKYA01105 STRAIGHT FEMALE UNION CXF - 28mmxRp 1 EKYA01106 STRAIGHT FEMALE UNION CXF - 35mmxRp 1 1/4 EKYA01107 STRAIGHT FEMALE UNION CXF - 42mmxRp 1 1/2 EKYA01108 STRAIGHT FEMALE UNION CXF - 54mmxRp 2

Product Images

Approval Holder:: Zhejiang Hailiang Co Ltd

Company Name
Zhejiang Hailiang Co Ltd
Address
Diankou Zhuji Zhejiang
Country
China

View All Listings by this Company
Manufacturer:: Zhejiang Hailiang Co Ltd

Company Name
Zhejiang Hailiang Co Ltd
Address
Diankou Zhuji Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #240604032

Range of ‘Isiflo Sprint’ push fit fittings for use with PE100 pipe (manufactured in accordance with EN 12201), for above and below ground use. Isiflo Sprint Family fittings can be installed with seal liners, support liners and without any liner. Maximum working pressure 16 bar. Cold water use only.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240604032
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: see model
Marking:: Isiflo, size, flow arrow and date of manufacture (clock wheel)
Installation Requirements:: R001
Expiry date:: 30/06/2029
Model:: 8210052 Repkit IS 20mm (repair kit) 8210053 Repkit IS 25mm (repair kit) 8210054 Repkit IS 32mm (repair kit) 8210055 Repkit IS 40mm (repair kit) 8210056 Repkit IS 50mm (repair kit) 8210057 Repkit IS 63mm (repair kit) 8211002 100 20x20 IS Straight coupl 8211003 100 25x25 IS Straight coupl 8211004 100 32x32 IS Straight coupl 8211005 100 40x40 IS Straight coupl 8211006 100 50x50 IS Straight coupl 8211007 100 63x63 IS Straight coupl 8211020 102 63x32 IS Straight coupl 8211021 102 25x20 IS Straight coupl 8211022 102 32x25 IS Straight coupl 8211023 102 40x32 IS Straight coupl 8211024 102 50x40 IS Straight coupl 8211025 102 63x50 IS Straight coupl 8211026 102 32x20 IS Straight coupl 8211028 102 50x32 IS Straight coupl 8211053 105 25x1" IS Male coupl 8211054 105 32x1 1/4" IS Male coupl 8211055 105 40x1 1/2" IS Male coupl 8211056 105 50x2" IS Male coupl 8211058 105 32x1 1/2" IS Male coupl 8211059 105 32x2" IS Male coupl 8211102 110 20x1/2" IS Male coupl 8211103 110 25x3/4" IS Male coupl 8211104 110 32x1" IS Male coupl 8211105 110 40x1 1/4" IS Male coupl 8211106 110 50x1 1/2" IS Male coupl 8211107 110 63x2" IS Male coupl 8211124 112 32x3/4" IS Male coupl 8211125 112 40x1" IS Male coupl 8211126 112 50x1 1/4" IS Male coupl 8211128 112 32x1/2" IS Male coupl 8211153 115 25x1"IS Female coupl 8211154 115 32x1 1/4"IS Female coupl 8211160 116 50x1"IS Female coupl 8211161 116 40x1"IS Female coupl 8211162 116 20x1/2"IS Female coupl 8211163 116 25x3/4"IS Female coupl 8211164 116 32x1"IS Female coupl 8211165 116 40x1 1/4"IS Female coupl 8211166 116 50x1 1/2"IS Female coupl 8211167 116 63x2"IS Female coupl 8211169 116 32x3/4"IS Female coupl 8211202 120 20x20 IS Elbow 90° 8211203 120 25x25 IS Elbow 90° 8211204 120 32x32 IS Elbow 90° 8211205 120 40x40 IS Elbow 90° 8211206 120 50x50 IS Elbow 90° 8211207 120 63x63 IS Elbow 90° 8211212 121 20x1/2"IS Elbow male cou 8211213 121 25x3/4"IS Elbow male cou 8211214 121 32x1" IS Elbow Male coup 8211215 121 40x1 1/4"IS Elbow male 8211216 121 50x1 1/2"IS Elbow male 8211217 121 63x2"IS Elbow male coup 8211218 121 40x1 1/2"IS Elbow male 8211219 121 32x2" IS Elbow Male coup 8211220 122 25x1"IS Elbow FM 90° 8211221 122 32x1"IS Elbow FM 90° 8211223 122 25x3/4"IS Elbow FM 90° 8211224 122 32x1"IS Elbow FM 90° 8211225 122 40x1 1/4"IS Elbow FM 90° 8211226 122 50x1 1/2"IS Elbow FM 90° 8211227 122 63x2"IS Elbow FM 90° 8211228 122 50x1 1/2"IS Elbow FM 90° 8211229 122 25x3/4"IS Elbow FM 90° 8211234 123 32x32 IS Elbow45° 8211235 123 40x40 IS Elbow45° 8211236 123 50x50 IS Elbow45° 8211237 123 63x63 IS Elbow45° 8211245 124 40x1"IS Elbow Male90° 8211246 124 50x1 1/4"IS Elbow M 90° 8211252 125 20x20x20 IS Tee 8211253 125 25x25x25 IS Tee 8211254 125 32x32x32 IS Tee 8211255 125 40x40x40 IS Tee 8211256 125 50x50x50 IS Tee 8211257 125 63x63x63 IS Tee 8211323 132 25x3/4"x25 IS Tee 8211324 132 32x1"x32 IS Tee 8211325 132 40x1 1/4"x40 IS Tee 8211326 132 50x1 1/2"x50 IS Tee 8211328 132 63x2"x63 IS Tee 8211652 165 20 IS EndCap 8211653 165 25IS EndCap 8211654 165 32IS EndCap 8211655 165 40IS EndCap 8211656 165 50IS EndCap 8211657 165 63IS EndCap 8211802 180 20x2,0Støttehylse SDR11 8211803 180/181 25x2,3 Støttehylse S11 8211804 180 32x3,0Støttehylse SDR11 8211805 180 40x3,7Støttehylse SDR11 8211806 180 50x4,6Støttehylse SDR11 8211807 180 63x5,8Støttehylse SDR11 8211823 182 Seal Liner 25x2,3 8211824 182 Seal Liner 32x3,0 8211825 182 Seal Liner 40x3,7 8211826 182 Seal Liner 50x4,6 8211827 182 Seal Liner 63x5,8 8212293 229 25x25PE DoubleSwivel elbow 8212294 229 32x32PE DoubleSwivel elbow 8212295 229 40x40PE DoubleSwivel elbow 8212296 229 50x50PE DoubleSwivel elbow 8212297 229 63x63PE DoubleSwivel elbow 8216105 110 40x1 1/4"IS m/støttehylse 8216106 110 50x1 1/2"IS m/støttehylse 8216107 110 63x2"IS m/støttehylse 8011729 Muffe 1"R x 3/4"R kompositt 8011739 Muffe 11/2"G x 1"G kompositt 8011749 Muffe 2"Gx 1 1/2"G kompositt 8011516 Muffe 3/4"G kompositt 8011519 Muffe 1"G kompositt 8011523 Muffe 1 1/4"G kompositt 8011526 Muffe 1 1/2"G kompositt 8011533 Muffe 2"G kompositt 8211305 130 40x32x40 Tee

Product Images

Approval Holder:: Isiflo AS

Company Name
Isiflo AS
Address
Enggata 40 Postboks 143 2830 Raufoss Norway

View All Listings by this Company
Manufacturer:: Isiflo AS

Company Name
Isiflo AS
Address
Enggata 40 Postboks 143 2830 Raufoss Norway

View All Listings by this Company

WRAS Approval Number: #240602058

SANHA Press Series 6000 & 16000 and PURAPRESS Series 8000 of press-fit fittings with copper (6000), bronze (8000) and chrome plated copper (16000) bodies and EPDM `O`-rings. For use with copper pipe manufactured in accordance with BS EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240602058
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Sizes are in mm Pressfit
Marking:: Sanha logo, Size and CuSi on body
Installation Requirements:: R001
Expiry date:: 30/06/2029
Model:: SANHA Press Series 6000: SANHA-Press Bend 90° M/F: 16001A12: 12. 16001A14: 14. 16001A15: 15. 16001A16: 16. 16001A18: 18. 16001A22: 22. 16001A28: 28. 16001A35: 35. 16001A76: 76,1. 16001A89: 88,9. 16001A108: 108,0. 16001L15: 15. SANHA-Press Bend 90° F/F: 16002A12: 12. 16002A14: 14. 16002A15: 15. 16002A16: 16. 16002A18: 18. 16002A22: 22. 16002A28: 28. 16002A76: 76,1. 16002A89: 88,9. 16002A108: 108,0. SANHA-Press Bend 45° M/F: 1604012: 12. 1604014: 14. 1604015: 15. 1604016: 16. 1604018: 18. 1604022: 22. 1604028: 28. 1604076: 76,1. 1604089: 88,9. 16040108: 108,0. SANHA-Press Bend 45° F/F: 1604112: 12. 1604114: 14. 1604115: 15. 1604116: 16. 1604118: 18. 1604122: 22. 1604128: 28. 1604176: 76,1. 1604189: 88,9. 16041108: 108,0. SANHA-Press Full Crossover: 1608512: 12. 1608514: 14. 1608515: 15. 1608516: 16. 1608518: 18. 1608522: 22. 1608528: 28. SANHA-Press Partial crossover: 1608612: 12. 1608614: 14. 1608615: 15. 1608616: 16. 1608618: 18. 1608622: 22. 1608628: 28. SANHA-Press Tee: 1613012: 12. 1613014: 14. 1613015: 15. 1613016: 16. 1613018: 18. 1613022: 22. 1613028: 28. 1613076: 76,1. 1613089: 88,9. 16130108: 108,0. SANHA-Press Tee: 16130121512: 12x15x12. 16130141214: 14x12x14. 16130151212: 15x12x12. 16130151215: 15x12x15. 16130151512: 15x15x12. 16130151815: 15x18x15. 16130152215: 15x22x15. 16130161216: 16x12x16. 16130161414: 16x14x14. 16130161416: 16x14x16. 16130181215: 18x12x15. 16130181218: 18x12x18. 16130181418: 18x14x18. 16130181515: 18x15x15. 16130181518: 18x15x18. 16130181618: 18x16x18. 16130181815: 18x18x15. 16130182218: 18x22x18. 16130221222: 22x12x22. 16130221422: 22x14x22. 16130221515: 22x15x15. 16130221518: 22x15x18. 16130221522: 22x15x22. 16130221622: 22x16x22. 16130221815: 22x18x15. 16130221818: 22x18x18. 16130221822: 22x18x22. 16130222215: 22x22x15. 16130222218: 22x22x18. 16130222822: 22x28x22. 16130281428: 28x14x28. 16130281522: 28x15x22. 16130281528: 28x15x28. 16130281628: 28x16x28. 16130281822: 28x18x22. 16130281828: 28x18x28. 16130282222: 28x22x22. 16130282228: 28x22x28. 16130282815: 28x28x15. 16130282818: 28x28x18. 16130282822: 28x28x22. 16130283528: 28x35x28. 16130762276: 76,1x22x76,1. 16130762876: 76,1x28x76,1. 16130897689: 88,9x76,1x88,9. 1613010876108: 108,0x76,1x108,0. 1613010889108: 108,0x88,9x108,0. 16130L15: 15. SANHA-Press Reducing coupling: 162401412: 14x12. 162401512: 15x12. 162401514: 15x14. 162401614: 16x14. 162401812: 18x12. 162401814: 18x14. 162401815: 18x15. 162401816: 18x16. 162402214: 22x14. 162402215: 22x15. 162402216: 22x16. 162402218: 22x18. 162402815: 28x15. 162402818: 28x18. 162402822: 28x22. SANHA-Press Reducer: 162431412: 14ax12. 162431512: 15ax12. 162431612: 16ax12. 162431614: 16ax14. 162431812: 18ax12. 162431814: 18ax14. 162431815: 18ax15. 162431816: 18ax16. 162432214: 22ax14. 162432215: 22ax15. 162432216: 22ax16. 162432218: 22ax18. 162432815: 28ax15. 162432816: 28ax16. 162432818: 28ax18. 162432822: 28ax22. 162438976: 88,9ax76,1. 1624310876: 108,0ax76,1. 1624310889: 108,0ax88,9. SANHA-Press Coupling: 1627012: 12. 1627014: 14. 1627015: 15. 1627016: 16. 1627018: 18. 1627022: 22. 1627028: 28. 1627076: 76,1. 1627089: 88,9. 16270108: 108,0. SANHA-Press End Cap: 1630112: 12. 1630114: 14. 1630115: 15. 1630116: 16. 1630118: 18. 1630122: 22. 1630128: 28. 1630176: 76,1. 1630189: 88,9. 16301108: 108,0. SANHA-Press Slip coupling: 16270S12: 12. 16270S15: 15. 16270S18: 18. 16270S22: 22. 16270S28: 28. 16270S76: 76,1. 16270S89: 88,9. 16270S108: 108,0. SANHA-Press Coupling: 1627012: 12. 1627014: 14. 1627015: 15. 1627016: 16. 1627018: 18. 1627022: 22. 1627028: 28. 1627076: 76,1. 1627089: 88,9. 16270108: 108,0 Models added September 2024 PuraPress series 6000: SANHA-Press Bend 90° M/F: 16001A35: 35. 16001A42: 42. 16001A54: 54. 16001A64: 64. 16001A67: 67. SANHA-Press Bend 90° F/F: 16002A35: 35. 16002A42: 42. 16002A54: 54. 16002A64: 64. 16002A67: 67. SANHA-Press Bend 45° M/F: 1604035: 35. 1604042: 42. 1604054: 54. 1604064: 64. 1604067: 67. SANHA-Press Bend 45° F/F: 1604135: 35. 1604142: 42. 1604154: 54. 1604164: 64. 1604167: 67. SANHA-Press Tee: 1613035: 35. 1613042: 42. 1613054: 54. 1613064: 64. 1613067: 67. SANHA-Press Tee: 16130351535: 35x15x35. 16130351835: 35x18x35. 16130352222: 35x22x22. 16130352228: 35x22x28. 16130352235: 35x22x35. 16130352828: 35x28x28. 16130352835: 35x28x35. 16130353522: 35x35x22. 16130353528: 35x35x28. 16130421542: 42x15x42. 16130422242: 42x22x42. 16130422842: 42x28x42. 16130423535: 42x35x35. 16130423542: 42x35x42. 16130542254: 54x22x54. 16130542854: 54x28x54. 16130543554: 54x35x54. 16130544254: 54x42x54. 16130644264: 64x42x64. 16130645464: 64x54x64. 16130672867: 67x28x67. 16130673567: 67x35x67. 16130674267: 67x42x67. 16130675467: 67x54x67. 16130763576: 76,1x35x76,1. 16130764276: 76,1x42x76,1. 16130765476: 76,1x54x76,1. 16130766476: 76,1x64x76,1. 16130766776: 76,1x67x76,1. 16130895489: 88,9x54x88,9. 16130896489: 88,9x64x88,9. 1613010854108: 108,0x54x108,0. 1613010864108: 108,0x64x108,0. 1613010867108: 108,0x67x108,0. SANHA-Press Reducing coupling: 162403522: 35x22. 162403528: 35x28. 162404222: 42x22. 162404228: 42x28. 162404235: 42x35. 162405428: 54x28. 162405435: 54x35. 162405442: 54x42. SANHA-Press Reducer: 162433522: 35ax22. 162433528: 35ax28. 162434222: 42ax22. 162434228: 42ax28. 162434235: 42ax35. 162435435: 54ax35. 162435442: 54ax42. 162436442: 64ax42. 162436454: 64ax54. 162436728: 67ax28. 162436735: 67ax35. 162436742: 67ax42. 162436754: 67ax54. 162437635: 76,1ax35. 162437642: 76,1ax42. 162437654: 76,1ax54. 162437667: 76,1ax67. 162438954: 88,9ax54. 162438964: 88,9ax64. 1624310842: 108,0ax42. 1624310854: 108,0ax54. 1624310864: 108,0ax64. 1624310867: 108,0ax67. SANHA-Press Coupling: 1627035: 35. 1627042: 42. 1627054: 54. 1627064: 64. 1627067: 67. SANHA-Press Slip coupling: 16270S35: 35. 16270S42: 42. 16270S54: 54. 16270S64: 64. 16270S67: 67. SANHA-Press End Cap: 1630135: 35. 1630142: 42. 1630154: 54. 1630164: 64. 1630167: 67. SANHA-Press Crimping flange PN 10/16: 1BMPF42: DN 40 / 42 mm. 1BMPF54: DN 50 / 54 mm. 1BMPF67: DN -- / 66,7 mm. 1BMPF76: DN 65 / 76,1 mm. 1BMPF76_DN80: DN 80 / 76,1 mm. 1BMPF89: DN 80 / 88,9 mm. PuraPress series 8000: PURAPRESS Female elbow 90°: 18090221: 22x1. 18090281: 28x1. 1809035114: 35x11/4. 1809042112: 42x11/2. 18090542: 54x2. PURAPRESS Male elbow 90°: 18092221: 22x1. 18092281: 28x1. 1809235114: 35x11/4. 1809242112: 42x11/2. 18092542: 54x2. PURAPRESS Union elbow, flat sealing: 18096221: 22x1. 18096281: 28x1 1809635114: 35x11/4. 1809642112: 42x11/2. 18096542: 54x2. PURAPRESS Tee, female: 181303512: 35x1/2x35. 18130351: 35x1x35. 181304212: 42x1/2x42. 181305412: 54x1/2x54. PURAPRESS Male adaptor: 18243221: 22x1. 18243281: 28x1. 1824328114: 28x11/4. 18243351: 35x1. - 1824335114: 35x11/4. - 1824335112: 35x11/2. - 1824342114: 42x11/4. - 1824342112: 42x11/2. - 1824354112: 54x11/2. - 18243542: 54x2. - 1824364212: 64x21/2. - 1824367212: 67x21/2. - 1824376212: 76,1x21/2. -> PURAPRESS Plug-in adaptor, female: 18246281: 28ax1. 1824635114: 35ax11/4. 1824642112: 42ax11/2. 18246542: 54ax2. PURAPRESS Flow Check Coupling with 2 holes: 18270FC26712: 67x1/2. PURAPRESS Female adaptor: 18270221: 22x1. 18270281: 28x1. 1827028114: 28x11/4. 18270351: 35x1. 1827035114: 35x11/4. 1827035112: 35x11/2. 1827042114: 42x11/4. 1827042112: 42x11/2. 1827054112: 54x11/2. 18270542: 54x2. 1827064212: 64x21/2. 1827067212: 67x21/2. 1827076212: 76,1x21/2. PURAPRESS Plug-in adaptor, male: 18280221: 22ax1. 18280281: 28ax1. 1828035114: 35ax11/4. 1828042112: 42ax11/2. 18280542: 54ax2. PURAPRESS Union, flat sealing: 1833035: 35. 1833042: 42. 1833054: 54. THREADED PURAPRESS Union, female, flat seal.: 18330221: 22x1. 18330281: 28x1. 1833035114: 35x11/4. 1833042112: 42x11/2. 18330542: 54x2. PURAPRESS Union, male, flat sealing: 18333221: 22x1. 18333281: 28x1. 1833335114: 35x11/4. 1833342112: 42x11/2. 18333542: 54x2. PURAPRESS Union adaptor, flat seal.: 18359151: 15x1. 18359181: 18x1. 18359221: 22x1. 1835922114: 22x11/4. 1835922112: 22x11/2. 18359281: 28x1. 1835928114: 28x11/4. 1835928112: 28x11/2. 1835935112: 35x11/2. 18359352: 35x2. 1835942134: 42x13/4. 18359422: 42x2. 1835954238: 54x23/8. 18359763: 76,1x3. 1835989312: 88,9x31/2. PURAPRESS Flange PN10/16: 1PURAPF35: DN 32 / 35 mm. 1PURAPF42: DN 40 / 42 mm. 1PURAPF54: DN 50 / 54 mm. 1PURAPF64: DN -- / 64 mm. 1PURAPF67: DN -- / 67 mm. PuraPress series 16000: SANHA-Press Chrome Male adaptor: 116243G1212: 12x1/2. 116243G1512: 15x1/2. 116243G1812: 18x1/2. 116243G1834: 18x3/4. 116243G2212: 22x1/2. 116243G2234: 22x3/4. 116243G221: 22x1. 116243G2834: 28x3/4. 116243G281: 28x1 116243G28114: 28x11/4. SANHA-Press Chrome Female adaptor: 116270G1212: 12x1/2. 116270G1512: 15x1/2. 116270G1812: 18x1/2. 116270G1834: 18x3/4. 116270G2212: 22x1/2. 116270G2234: 22x3/4 116270G221: 22x1. 116270G2834: 28x3/4. 116270G281: 28x1. 116270G28114: 28x11/4. SANHA-Press Chrome Plug-in adaptor, male: 116280G1212: 12ax1/2. 116280G1512: 15ax1/2. 116280G1812: 18ax1/2. 116280G1834: 18ax3/4. 116280G2212: 22ax1/2. 116280G2234: 22ax3/4. 116280G2834: 28ax3/4. 116280G281: 28ax1. SANHA-Press Chrome Union adaptor, flat seal.: 116359G1212: 12x1/2. 116359G1534: 15x3/4. 116359G181: 18x1.
PuraPress series 8000: PURAPRESS Female elbow 90°: 180901238: 12x3/8. 180901212: 12x1/2. 180901412: 14x1/2. 180901538: 15x3/8. 180901512: 15x1/2. 180901534: 15x3/4. 180901612: 16x1/2. 180901812: 18x1/2. 180901834: 18x3/4. 180902212: 22x1/2. 180902234: 22x3/4. 180902812: 28x1/2. 180902834: 28x3/4. PURAPRESS Male elbow 90°: 180921238: 12x3/8. 180921212: 12x1/2. 180921412: 14x1/2. 180921538: 15x3/8. 180921512: 15x1/2. 180921612: 16x1/2. 180921812: 18x1/2. 180921834: 18x3/4. 180922212: 22x1/2. 180922234: 22x3/4. PURAPRESS Union elbow, flat sealing: 180961212: 12x1/2. 180961512: 15x1/2. 180961812: 18x1/2. 180961834: 18x3/4. 180962234: 22x3/4. PURAPRESS Tee, female: 181301212: 12x1/2x12. 181301412: 14x1/2x14. 181301538: 15x3/8x15. 181301512: 15x1/2x15. 181301612: 16x1/2x16. 181301812: 18x1/2x18. 181302212: 22x1/2x22. 181302234: 22x3/4x22. 181302812: 28x1/2x28. 181302834: 28x3/4x28. PURAPRESS Male adaptor: 182431238: 12x3/8. 182431212: 12x1/2. 182431438: 14x3/8. 182431412: 14x1/2. 182431538: 15x3/8. 182431512: 15x1/2. 182431534: 15x3/4. 182431612: 16x1/2. 182431634: 16x3/4. 182431812: 18x1/2. 182431834: 18x3/4. 182432212: 22x1/2. 182432234: 22x3/4. 182432834: 28x3/4. 18243763: 76,1x3. 18243893: 88,9x3. 182431084: 108,0x4. PURAPRESS Plug-in adaptor, female: 182461212: 12ax1/2. 182461538: 15ax3/8. 182461512: 15ax1/2. 182461812: 18ax1/2. 182461834: 18ax3/4. 182462212: 22ax1/2. 182462234: 22ax3/4. 182462834: 28ax3/4. PURAPRESS Flow Check Coupling with 2 holes: 18270FC27612: 76,1x1/2. 18270FC38934: 88,9x3/4. 18270FC410834: 108,0x3/4. PURAPRESS Female adaptor: 182701238: 12x3/8. 182701212: 12x1/2. 182701438: 14x3/8. 182701412: 14x1/2. 182701538: 15x3/8. 182701512: 15x1/2. 182701534: 15x3/4. 182701612: 16x1/2. 182701634: 16x3/4. 182701812: 18x1/2. 182701834: 18x3/4. 182702212: 22x1/2. 182702234: 22x3/4. 182702834: 28x3/4. 18270893: 88,9x3. PURAPRESS Plug-in adaptor, male: 182801212: 12ax1/2. 182801538: 15ax3/8. 182801512: 15ax1/2. 182801812: 18ax1/2. 182801834: 18ax3/4. 182802212: 22ax1/2. 182802234: 22ax3/4. 182802834: 28ax3/4. PURAPRESS Union, flat sealing: 1833015: 15. 1833018: 18. 1833022: 22. 1833028: 28. PURAPRESS Union, female, flat seal.: 183301512: 15x1/2. 183301534: 15x3/4. 183301812: 18x1/2. 183301834: 18x3/4. 183302234: 22x3/4. 183302834: 28x3/4. PURAPRESS Union, male, flat sealing: 183331238: 12x3/8. 183331212: 12x1/2. 183331512: 15x1/2. 183331534: 15x3/4. 183331812: 18x1/2. 183331834: 18x3/4. 183332212: 22x1/2. 183332234: 22x3/4. 183332834: 28x3/4. PURAPRESS Union adaptor, flat seal.: 183591212: 12x1/2. 183591234: 12x3/4. 183591438: 14x3/8. 183591412: 14x1/2. 183591538: 15x3/8. 183591512: 15x1/2. 183591534: 15x3/4. 183591634: 16x3/4. 183591834: 18x3/4. 183592234: 22x3/4. PURAPRESS Wall Plate, female end and female thread: 184721212: 12x1/2. 184721412: 14x1/2. 184721512: 15x1/2. 184721612: 16x1/2. 184721812: 18x1/2. 184721834: 18x3/4. 184722212: 22x1/2. 184722234: 22x3/4. PURAPRESS Wall plate with universal flange, with female end and female thread: 184731512: 15x1/2. 184732234: 22x3/4. PURAPRESS Double wall plate, both sides female end and female thread: 18478GZ151215: 15x1/2x15. 18478GZ151216: 15x1/2x16. 18478GZ151218: 15x1/2x18. 18478GZ151222: 15x1/2x22. 18478GZ161216: 16x1/2x16. 18478GZ161218: 16x1/2x18. 18478GZ161222: 16x1/2x22. 18478GZ181215: 18x1/2x15. 18478GZ181218: 18x1/2x18. 18478GZ181222: 18x1/2x22. 18478GZ221215: 22x1/2x15. 18478GZ221218: 22x1/2x18. 18478GZ221222: 22x1/2x22. PURAPRESS Mounting unit, female solder ends and female threads: 189761512: 15x1/2. PURAPRESS Installation set for fastening wall plates: 18980G1512: 15x1/2. 18980G1812: 18x1/2. 18980G2212: 22x1/2. PURAPRESS Installation set for fastening double wall plates: 18981G151215: 15x1/2x15. 18981G151218: 15x1/2x18. 18981G151222: 15x1/2x22. 18981G181215: 18x1/2x15. 18981G181218: 18x1/2x18. 18981G181222: 18x1/2x22. 18981G221215: 22x1/2x15. 18981G221218: 22x1/2x18. 18981G221222: 22x1/2x22. PURAPRESS Flange PN10/16: 1PURAPF28: DN 25 / 28 mm. 1PURAPF76: DN 65 / 76,1 mm. 1PURAPF76_DN80: DN 80 / 76,1 mm. 1PURAPF89: DN 80 / 88,9 mm. 1PURAPF108: DN 100 / 108,0 mm. SANHA Press Series 16000: SANHA-Press Chrom Bend 90° M/F: 116001A12: 12. 116001A15: 15. 116001A18: 18. 116001A22: 22. 116001A28: 28. SANHA-Press Chrom Bend 90° F/F: 116002A12: 12. 116002A15: 15. 116002A18: 18. 116002A22: 22. 116002A28: 28. SANHA-Press Chrom Bend 45° M/F: 11604012: 12. 11604015: 15. 11604018: 18. 11604022: 22. 11604028: 28. SANHA-Press Chrom Bend 45° F/F: 11604112: 12. 11604115: 15. 11604118: 18. 11604122: 22. 11604128: 28. SANHA-Press Chrom Full Crossover: 11608512: 12. 11608515: 15. 11608518: 18. 11608522: 22. 11608528: 28. SANHA-Press Chrom Partial crossover: 11608612: 12. 11608615: 15. 11608618: 18. 11608622: 22. 11608628: 28. SANHA-Press Chrom Tee: 11613012: 12. 11613015: 15. 11613018: 18. 11613022: 22. 11613028: 28. 116130121512: 12x15x12. 116130151212: 15x12x12. 116130151215: 15x12x15. 116130151512: 15x15x12. 116130181218: 18x12x18. 116130181515: 18x15x15. 116130181518: 18x15x18. 116130181815: 18x18x15. 116130182218: 18x22x18. 116130221222: 22x12x22. 116130221515: 22x15x15. 116130221522: 22x15x22. 116130221818: 22x18x18. 116130221822: 22x18x22. 116130222215: 22x22x15. 116130222218: 22x22x18. 116130222822: 22x28x22. 116130281522: 28x15x22. 116130281528: 28x15x28. 116130282222: 28x22x22. 116130282228: 28x22x28. 116130282815: 28x28x15. 116130282822: 28x28x22. SANHA-Press Chrom Reducing coupling: 1162401512: 15x12. 1162401812: 18x12. 1162401815: 18x15. 1162402215: 22x15. 1162402218: 22x18. 1162402815: 28x15. 1162402822: 28x22. SANHA-Press Chrom Reducer: 1162431512: 15ax12. 1162431812: 18ax12. 1162431815: 18ax15. 1162432215: 22ax15. 1162432218: 22ax18. 1162432815: 28ax15. 1162432822: 28ax22. SANHA-Press Chrom Male adaptor: 116243G1238: 12x3/8. 116243G1538: 15x3/8. SANHA-Press Chrom Coupling: 11627012: 12. 11627015: 15. 11627018: 18. 11627022: 22. 11627028: 28. SANHA-Press Chrom Female adaptor: 116270G1238: 12x3/8. 116270G1538: 15x3/8. SANHA-Press Chrom Slip coupling: 116270S12: 12. 116270S15: 15. 116270S18: 18. 116270S22: 22. 116270S28: 28. SANHA-Press Chrom Plug-in adaptor, male: 116280G1538: 15ax3/8.

Product Images

Approval Holder:: SANHA GmbH & Co. KG

Company Name
SANHA GmbH & Co. KG
Address
Im Teelbruch 80 Essen
Postcode
45219
Country
Germany
Phone
+32499361070
General Email
nicolas.verspecht@sanha.com

View All Listings by this Company
Manufacturer:: SANHA GmbH & Co. KG

Company Name
SANHA GmbH & Co. KG
Address
Im Teelbruch 80 Essen
Postcode
45219
Country
Germany
Phone
+32499361070
General Email
nicolas.verspecht@sanha.com

View All Listings by this Company

WRAS Approval Number: #2101377

Range of press fittings with a stainless steel body and EPDM ‘O’ rings for use with stainless steel 316L pipe manufactured to EN10312. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2101377
Size:: see model
Marking:: JD PRESS, JD logo, WRAS, date of manufacture MM/YY and size on body.
Installation Requirements:: R001
Expiry date:: 31/01/2026
Model:: JDF22015SS STRAIGHT COUPLING 15mm JDF22018SS STRAIGHT COUPLING 18mm JDF22022SS STRAIGHT COUPLING 22mm JDF22028SS STRAIGHT COUPLING 28mm JDF22035SS STRAIGHT COUPLING 35mm JDF22042SS STRAIGHT COUPLING 42mm JDF22054SS STRAIGHT COUPLING 54mm JDF22115SS SLIP COUPLING 15mm JDF22118SS SLIP COUPLING 18mm JDF22122SS SLIP COUPLING 22mm JDF22128SS SLIP COUPLING 28mm JDF22135SS SLIP COUPLING 35mm JDF22142SS SLIP COUPLING 42mm JDF22154SS SLIP COUPLING 54mm JDF9015SS 90 DEG ELBOW 15mm JDF9018SS 90 DEG ELBOW 18mm JDF9022SS 90 DEG ELBOW 22mm JDF9028SS 90 DEG ELBOW 28mm JDF9035SS 90 DEG ELBOW 35mm JDF9042SS 90 DEG ELBOW 42mm JDF9054SS 90 DEG ELBOW 54mm JDF9215SS 90 DEG M&F ELBOW 15mm JDF9218SS 90 DEG M&F ELBOW 18mm JDF9222SS 90 DEG M&F ELBOW 22mm JDF9228SS 90 DEG M&F ELBOW 28mm JDF9235SS 90 DEG M&F ELBOW 35mm JDF9242SS 90 DEG M&F ELBOW 42mm JDF9254SS 90 DEG M&F ELBOW 54mm JDF12015SS 45 DEG ELBOW 15mm JDF12018SS 45 DEG ELBOW 18mm JDF12022SS 45 DEG ELBOW 22mm JDF12028SS 45 DEG ELBOW 28mm JDF12035SS 45 DEG ELBOW 35mm JDF12042SS 45 DEG ELBOW 42mm JDF12054SS 45 DEG ELBOW 54mm JDF12115SS 45 DEG M&F ELBOW 15mm JDF12118SS 45 DEG M&F ELBOW 18mm JDF12122SS 45 DEG M&F ELBOW 22mm JDF12128SS 45 DEG M&F ELBOW 28mm JDF12135SS 45 DEG M&F ELBOW 35mm JDF12142SS 45 DEG M&F ELBOW 42mm JDF12154SS 45 DEG M&F ELBOW 54mm JDF13015SS TEE 15mm JDF13018SS TEE 18mm JDF13022SS TEE 22mm JDF13028SS TEE 28mm JDF13035SS TEE 35mm JDF13042SS TEE 42mm JDF13054SS TEE 54mm JDF13018X15SS REDUCING TEE 18mmx15mm JDF13022X15SS REDUCING TEE 22mmx15mm JDF13022X18SS REDUCING TEE 22mmx18mm JDF13028X15SS REDUCING TEE 28mmx15mm JDF13028X18SS REDUCING TEE 28mmx18mm JDF13028X22SS REDUCING TEE 28mmx22mm JDF13035X15SS REDUCING TEE 35mmx15mm JDF13035X18SS REDUCING TEE 35mmx18mm JDF13035X22SS REDUCING TEE 35mmx22mm JDF13035X28SS REDUCING TEE 35mmx28mm JDF13042X15SS REDUCING TEE 42mmx15mm JDF13042X18SS REDUCING TEE 42mmx18mm JDF13042X22SS REDUCING TEE 42mmx22mm JDF13042X28SS REDUCING TEE 42mmx28mm JDF13042X35SS REDUCING TEE 42mmx35mm JDF13054X15SS REDUCING TEE 54mmx15mm JDF13054X18SS REDUCING TEE 54mmx18mm JDF13054X22SS REDUCING TEE 54mmx22mm JDF13054X28SS REDUCING TEE 54mmx28mm JDF13054X35SS REDUCING TEE 54mmx35mm JDF13054X42SS REDUCING TEE 54mmx42mm JDF1315X1/2BSPSS FEMALE ADAPTER 15mm×Rp1/2’’ JDF1322X3/4BSPSS FEMALE ADAPTER 22mm×Rp3/4” JDF1328X1BSPSS FEMALE ADAPTER 28mm×Rp1” JDF1335X11/4BSPSS FEMALE ADAPTER 35mm×Rp1‐1/4” JDF1342X11/2BSPSS FEMALE ADAPTER 42mm×Rp1‐1/2” JDF1354X2BSPSS FEMALE ADAPTER 54mm×Rp2” JDF1215X1/2BSPSS STRAIGHT SWIVEL CONNECTOR 15mm×G1/2” JDF1218X1/2BSPSS STRAIGHT SWIVEL CONNECTOR 18mm×G1/2” JDF1222X3/4BSPSS STRAIGHT SWIVEL CONNECTOR 22mm×G3/4” JDF1228X1BSPSS STRAIGHT SWIVEL CONNECTOR 28mm×G1” JDF1235X11/4BSPSS STRAIGHT SWIVEL CONNECTOR 35mm×G1‐1/4” JDF1242X11/2BSPSS STRAIGHT SWIVEL CONNECTOR 42mm×G1‐1/2” JDF1254X2BSPSS STRAIGHT SWIVEL CONNECTOR 54mm×G2” JDF1415X1/2BSPTSS MALE ADAPTER 15mm×R1/2” JDF1418X1/2BSPTSS MALE ADAPTER 18mm×R1/2” JDF1422X3/4BSPTSS MALE ADAPTER 22mm×R3/4” JDF1428X1BSPTSS MALE ADAPTER 28mm×R1” JDF1435X11/4BSPTSS MALE ADAPTER 35mm×R1‐1/4” JDF1442X11/2BSPTSS MALE ADAPTER 42mm×R1‐1/2” JDF1454X2BSPTSS MALE ADAPTER 54mm×R2” JDF2115X1/2BSPSS Female elbow 15mm×Rp1/2” JDF2118X1/2BSPSS Female elbow 18mm×Rp1/2” JDF2122X3/4BSPSS Female elbow 22mm×Rp3/4” JDF2128X1BSPSS Female elbow 28mm×Rp1” JDF2135X11/4BSPSS Female elbow 35mm×Rp1‐1/4” JDF2142X11/2BSPSS Female elbow 42mm×Rp1‐1/2” JDF2154X2BSPSS Female elbow 54mm×Rp2” JDF2315X1/2BSPTSS Male elbow 15mm×R1/2” JDF2318X1/2BSPTSS Male elbow 18mm×R1/2” JDF2322X1/2BSPTSS Male elbow 22mm×R1/2” JDF2322X3/4BSPTSS Male elbow 22mm×R3/4” JDF2328X1BSPTSS Male elbow 28mm×R1” JDF2335X11/4BSPTSS Male elbow 35mm×R1‐1/4” JDF2342X11/2BSPTSS Male elbow 42mm×R1‐1/2” JDF2354X2BSPTSS Male elbow 54mm×R2” JDF13115X1/2BSPSS PRESS X BSP TEE 15mm×Rp1/2” JDF13118X1/2BSPSS PRESS X BSP TEE 18mm×Rp1/2” JDF13122X3/4BSPSS PRESS X BSP TEE 22mm×Rp3/4” JDF13128X1/2BSPSS PRESS X BSP TEE 28mm×Rp1/2 JDF13128X1BSPSS PRESS X BSP TEE 28mm×Rp1” JDF13135X11/4BSPSS PRESS X BSP TEE 35mm×Rp1‐1/4” JDF13142X11/2BSPSS PRESS X BSP TEE 42mm×Rp1‐1/2” JDF13154X2BSPSS PRESS X BSP TEE 54mm×Rp2” JDF2515X1/2BSPTSS PRESS X BSPT TEE 15mm×R1/2” JDF2518X1/2BSPTSS PRESS X BSPT TEE 18mm×R1/2” JDF2522X3/4BSPTSS PRESS X BSPT TEE 22mm×R3/4” JDF2528X1/2BSPTSS PRESS X BSPT TEE 28 mm×R1/2’’ JDF2528X1BSPTSS PRESS X BSPT TEE 28mm×R1” JDF2535X11/4BSPTSS PRESS X BSPT TEE 35mm×R1‐1/4” JDF2542X11/2BSPTSS PRESS X BSPT TEE 42mm×R1‐1/2” JDF2554X2BSPTSS PRESS X BSPT TEE 54mm×R2” JDF2618X15SS Reducer-A 18mm×15mm JDF2622X15SS Reducer-A 22mm×15mm JDF2622X18SS Reducer-A 22mm×18mm JDF2628X15SS Reducer-A 28mm×15mm JDF2628X18SS Reducer-A 28mm×18mm JDF2628X22SS Reducer-A 28mm×22mm JDF2635X15SS Reducer-A 35mm×15mm JDF2635X18SS Reducer-A 35mm×18mm JDF2635X22SS Reducer-A 35mm×22mm JDF2635X28SS Reducer-A 35mm×28mm JDF2642X15SS Reducer-A 42mm×15mm JDF2642X18SS Reducer-A 42mm×18mm JDF2642X22SS Reducer-A 42mm×22mm JDF2642X28SS Reducer-A 42mm×28mm JDF2642X35SS Reducer-A 42mm×35mm JDF2654X42SS Reducer-A 54mm×42mm JDF24018X15SS COUPLING REDUCER 18mmx15mm JDF24022X15SS COUPLING REDUCER 22mmx15mm JDF24022X18SS COUPLING REDUCER 22mmx18mm JDF24028X15SS COUPLING REDUCER 28mmx15mm JDF24028X18SS COUPLING REDUCER 28mmx18mm JDF24028X22SS COUPLING REDUCER 28mmx22mm JDF24035X15SS COUPLING REDUCER 35mmx15mm JDF24035X18SS COUPLING REDUCER 35mmx18mm JDF24035X22SS COUPLING REDUCER 35mmx22mm JDF24035X28SS COUPLING REDUCER 35mmx28mm JDF24042X15SS COUPLING REDUCER 42mmx15mm JDF24042X18SS COUPLING REDUCER 42mmx18mm JDF24042X22SS COUPLING REDUCER 42mmx22mm JDF24042X28SS COUPLING REDUCER 42mmx28mm JDF24042X35SS COUPLING REDUCER 42mmx35mm JDF24054X15SS COUPLING REDUCER 54mmx15mm JDF24054X18SS COUPLING REDUCER 54mmx18mm JDF24054X22SS COUPLING REDUCER 54mmx22mm JDF24054X28SS COUPLING REDUCER 54mmx28mm JDF24054X35SS COUPLING REDUCER 54mmx35mm JDF24054X42SS COUPLING REDUCER 54mmx42mm

Approval Holder:: JD Fire Ltd.

Company Name
JD Fire Ltd.
Address
Wheatfield Works, Ashton Road, Oldham
Country
OL8 3HX

View All Listings by this Company

WRAS Approval Number: #240702016

Range of M profile press fit fittings with a brass body and NBR O-rings, for use with copper pipe manufactured to EN1057 and stainless-steel pipe manufactured to EN10312. Maximum working pressure: 10 Bar. Maximum operating temperature: 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240702016
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models.
Marking:: E logo and size on body.
Installation Requirements:: R001
Expiry date:: 31/07/2029
Model:: Straight adaptor - Press fit x Female: 2PSFe1501 - 15MM x 1/2" (F) BSP, 2PSFe1502 - 15MM x 3/4" (F) BSP, 2PSFe2201 - 22MM x 1/2" (F) BSP, 2PSFe2202 - 22MM x 3/4" (F) BSP, 2PSFe2203 - 22MM x 1" (F) BSP, 2PSFe2802 - 28MM x 3/4" (F) BSP, 2PSFe2803 - 28MM x 1" (F) BSP, 2PSFe3503 - 35MMx 1" (F) BSP, 2PSFe3504 - 35MM X 11/4" (F) BSP, 2PSFe4205 - 42MM X 11/2" (F) BSP, 2PSFe5406 - 54MM X 2" (F) BSP. Straight adaptor - Press fit x Male: 2PSKe1501 - 15MM X 1/2" (M) BSP, 2PSKe1502 - 15MM X 3/4"(M) BSP, 2PSKe2201 - 22MM X 1/2" (M) BSP, 2PSKe2202 - 22MM X 3/4" (M) BSP, 2PSKe2203 - 22MM X 1" (M) BSP, 2PSKe2802 - 28MM X 3/4" (M) BSP, 2PSKe2803 - 28MM X 1" (M) BSP, 2PSKe3503 - 35MM X 1" (M) BSP, 2PSKe3504 - 35MM X 11/4" (M) BSP, 2PSKe4205 - 42MM X 11/2" (M) BSP, 2PSKe5406 - 54MM X 2" (M) BSP. Straight adaptor - Press fit x Swivel Female: 2PSQe1501 - 15MM X 1/2" (F) BSP SWIVEL, 2PSQe1502 - 15MM X 3/4" (F) BSP SWIVEL, 2PSQe2202 - 22MM X 3/4" (F) BSP SWIVEL, 2PSQe2203 - 22MM X 1" (F) BSP SWIVEL, 2PSQe2803 - 28MM X 1" (F) BSP SWIVEL, 2PSQe2804 - 28MM X 11/4" (F) BSP SWIVEL. Straight pipe union coupling - Press fit x Female/Male: 2PSHe1501 - 15MM X 1/2" (M) BSP UNION, 2PSHe2202 - 22MM X 3/4" (M) BSP UNION, 2PSHe2803 - 28MM X 1" (M) BSP UNION, 2PSHe3504 - 35MM X 1 1/4" (M) BSP UNION, 2PSHe4205 - 42MM X 1 1/2" (M) BSP UNION, 2PSHe5406 - 54MM X 2" (M) BSP UNION, 2PSGe1501 - 15MM X 1/2" (F) BSP UNION, 2PSGe2202 - 22MM X 3/4"(F) BSP UNION, 2PSGe2803 - 28MM X 1"(F) BSP UNION, 2PSGe3504 - 35MM X 1 1/4" (F) BSP UNION, 2PSGe4205 - 42MM X 1 1/2"(F) BSP UNION, 2PSGe5406 - 54MM X 2"(F) BSP UNION. 90°Elbow adaptor- Press fit x Female/Male: 2PSFe1501E - 15MM X 1/2" (F) BSP, 2PSFe2202E - 22MM X 3/4" (F) BSP, 2PSFe2803E - 28MM X 1" (F) BSP, 2PSKe1501E - 15MM X 1/2" (M) BSP, 2PSKe2202E - 22MM X 3/4" (M) BSP, 2PSKe2803E - 28MM X 1" (M) BSP. Elbow Wall Plate - Press fit x Female: 2PSRe1501 - 15MM X 1/2" (F) BSP. Branch Tee: Press fit x Female x Press fit: 2PSJe151501 - 15MM X 15MM X 1/2" (F) BSP, 2PSJe222201 - 22MM X 22MM X 1/2" (F) BSP, 2PSJe222202 - 22MM X 22MM X 34" (F) BSP, 2PSJe282801 - 28MM X 28MM X 1/2" (F) BSP, 2PSJe282802 - 28MM X 28MM X 3/4" (F) BSP, 2PSJe353501 - 35MM X 35MM X 1/2" (F) BSP, 2PSJe424201 - 42MM X 42MM X 1/2" (F) BSP, 2PSJe545401 - 54MM X 54MM X 1/2" (F) BSP.

Product Images

Approval Holder:: IDC Plumbing & Heating Technology (Beijing) Ltd.

Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company

WRAS Approval Number: #240702052

‘Tectite 316’ range of push-fit fittings with stainless steel bodies incorporating EPDM ‘O’-rings for use with stainless steel tube (Grade 316 manufactured to EN 10312). Maximum working pressure: Fittings 15mm to 28mm 10.0 bar. Fittings 35mm to 54mm 6.0 bar. Maximum operating temperature 90°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240702052
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models.
Marking:: Tectite 316 & size on body.
Installation Requirements:: R001
Expiry date:: 31/07/2029
Model:: 15mm TS1/TS270 Coupling 18mm TS1/TS270 Coupling 22mm TS1/TS270 Coupling 28mm TS1/TS270 Coupling 35mm TS1/TS270 Coupling 42mm TS1/TS270 Coupling 54mm TS1/TS270 Coupling 15mm TS1S/TS270S Slip Coupling 18mm TS1S/TS270S Slip Coupling 22mm TS1S/TS270S Slip Coupling 28mm TS1S/TS270S Slip Coupling 15mm x 1/2" TS2/TS270G Connector 18mm x 3/4" TS2/TS270G Connector 18mm x 1/2" TS2/TS270G Connector 22mm x 3/4" TS2/TS270G Connector 22mm x 1/2" TS2/TS270G Connector 22mm x 1" TS2/TS270G Connector 28mm x 3/4" TS2/TS270G Connector 28mm x 1" TS2/TS270G Connector 35mm x 1 1/4" TS2/TS270G Connector 42mm x 1 1/2" TS2/TS270G Connector 54mm x 2" TS2/TS270G Connector 15mm x 1/2" TS3/TS243G Connector 18mm x 3/4" TS3/TS243G Connector 18mm x 1/2" TS3/TS243G Connector 22mm x 3/4" TS3/TS243G Connector 22mm x 1/2" TS3/TS243G Connector 28mm x 3/4" TS3/TS243G Connector 28mm x 1" TS3/TS243G Connector 35mm x 1 1/4" TS3/TS243G Connector 42mm x 1 1/2" TS3/TS243G Connector 54mm x 2" TS3/TS243G Connector 18 x 15mm TS6/TS243 Reducer 22 x 15mm TS6/TS243 Reducer 22 x 18mm TS6/TS243 Reducer 28 x 15mm TS6/TS243 Reducer 28 x 18mm TS6/TS243 Reducer 28 x 22mm TS6/TS243 Reducer 35 x 22mm TS6/TS243 Reducer 35 x 28mm TS6/TS243 Reducer 42 x 22mm TS6/TS243 Reducer 42 x 28mm TS6/TS243 Reducer 42 x 35mm TS6/TS243 Reducer 54 x 35mm TS6/TS243 Reducer 54 x 42mm TS6/TS243 Reducer 15mm TS12/TS090 Elbow 18mm TS12/TS090 Elbow 22mm TS12/TS090 Elbow 28mm TS12/TS090 Elbow 35mm TS12/TS090 Elbow 42mm TS12/TS090 Elbow 54mm TS12/TS090 Elbow 15mm TS12S/TS092 Street Elbow 18mm TS12S/TS092 Street Elbow 22mm TS12S/TS092 Street Elbow 28mm TS12S/TS092 Street Elbow 15mm x 1/2" TS13/TS092G Elbow 18mm x 1/2" TS13/TS092G Elbow 22mm x 3/4" TS13/TS092G Elbw , 28mm x 1" TS13/TS092G Elbow 15mm x 1/2" TS14/TS090G Elbow 18mm x 1/2" TS14/TS090G Elbow 18mm x 3/4" TS14/TS090G Elbow 22mm x 3/4" TS14/TS090G Elbow 28mm x 1" TS14/TS090G Elbow 15mm x 1/2" TS15/TS471G Backplate Elbow 18mm x 1/2" TS15/TS471G Backplate Elbow 22mm x 3/4" TS15/TS471G Backplate Elbow 15mm TS18/TS002A Slow Bend 18mm TS18/TS002A Slow Bend 22mm TS18/TS002A Slow Bend 28mm TS18/TS002A Slow Bend 35mm TS18/TS002A Slow Bend 42mm TS18/TS002A Slow Bend 54mm TS18/TS002A Slow Bend 15mm TS18S/TS001 Elbow 18mm TS18S/TS001 Elbow 22mm TS18S/TS001 Elbow 28mm TS18S/TS001 Elbow 15mm TS21/TS041 Obtuse Elbow 18mm TS21/TS041 Obtuse Elbow 22mm TS21/TS041 Obtuse Elbow 28mm TS21/TS041 Obtuse Elbow 35mm TS21/TS041 Obtuse Elbow 42mm TS21/TS041 Obtuse Elbow 54mm TS21/TS041 Obtuse Elbow 15mm TS21S/TS040 Obtuse Street Elbow 18mm TS21S/TS040 Obtuse Street Elbow 22mm TS21S/TS040 Obtuse Street Elbow 28mm TS21S/TS040 Obtuse Street Elbow 35mm TS21S/TS040 Obtuse Street Elbow 42mm TS21S/TS040 Obtuse Street Elbow 15mm TS24/TS130 Tee 18mm TS24/TS130 Tee 22mm TS24/TS130 Tee 28mm TS24/TS130 Tee 35mm TS24/TS130 Tee 42mm TS24/TS130 Tee 54mm TS24/TS130 Tee 18 x 18 x 15mm TS25/TS130 Tee 22 x 22 x 15mm TS25/TS130 Tee 22 x 22 x 18mm TS25/TS130 Tee 28 x 28 x 15mm TS25/TS130 Tee 28 x 28 x 18mm TS25/TS130 Tee 28 x 28 x 22mm TS25/TS130 Tee 35 x 35 x 15mm TS25/TS130 Tee 35 x 35 x 22mm TS25/TS130 Tee 35 x 35 x 28mm TS25/TS130 Tee 42 x 42 x 28mm TS25/TS130 Tee 54 x 54 x 22mm TS25/TS130 Tee 54 x 54 x 28mm TS25/TS130 Tee 15 x 15mm x 1/2" TS30/TS130G Tee 18 x 18mm x 1/2" TS30/TS130G Tee 22 x 22mm x 1/2" TS30/TS130G Tee 22 x 22mm x 3/4" TS30/TS130G Tee 28 x 28mm x 1/2" TS30/TS130G Tee 35 x 35mm x 1/2" TS30/TS130G Tee 42 x 42mm x 1/2" TS30/TS130G Tee 15mm TS61/TS301 Stop End 18mm TS61/TS301 Stop End 22mm TS61/TS301 Stop End 28mm TS61/TS301 Stop End 35mm TS61/TS301 Stop End 42mm TS61/TS301 Stop End 54mm TS61/TS301 Stop End 15mm x 1/2" TS62/TS062 Tap Connector 22mm x 3/4" TS62/TS062 Tap Connector

Product Images

Approval Holder:: Aalberts Integrated Piping Systems Ltd.

Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company
Manufacturer:: Aalberts Integrated Piping Systems Ltd.

Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

WRAS Approval Number: #240702050

Range of compression fitting with brass and DZR brass bodies, supplied with brass compression rings. For use with copper tube (manufactured to BS EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240702050
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Marking:: Marking: Conex Sanbra & size on body. DZR brass models also have CR on body.
Installation Requirements:: R001
Expiry date:: 31/07/2029
Model:: Model: Conex Compression range. 303 D021020303- - 12 x 3/8” D031020303- - 12 x ½” E021020303- - 15 x 3/8” E031020303- - 15 x ½” E041020303- - 15 x ¾” E051020303- - 15 x 1” F031020303- - 18 x ½” F041020303- - 18 x ¾” G031020303- - 22 x ½” G041020303- - 22 x ¾” G051020303- - 22 x 1” H051020303- - 28 x 1” H061020303- - 28 x 1-1/4” B015020303 - 8 x ¼” B025020303 - 8 x 3/8” B035020303 - 8 x ½” C015020303 – 10 x ¼” C025020303 – 10 x 3/8” C035020303 – 10 x ½” D025020303 – 12 x 3/8” D035020303 – 12 x ½” E025020303 – 15 x 3/8” E035020303 – 15 x ½” E045020303 – 15 X ¾” F035020303 – 18 x ½” F045020303 – 18 x ¾” G045020303 – 22 x ¾” G055020303 – 22 x 1” H045020303 – 28 x ¾” H055020303 – 28 x 1” J055020303 – 35 x 1” J065020303 – 35 x 1-1/4” K075020303 – 42 x 1-1/2” N085020303 – 54 x 2” 303SF E031020303SF – 15 x ½” G041020303SF – 22 x ¾” E035020303SF – 15 x ½” E045020303SF – 15 x ¾” G045050303SF – 22 x ¾” 303ST E031020303ST – 15MM E041020303ST – 15MM G041020303ST – 22MM 321 E- - 1020321- - 15MM G- - 1020321- - 22MM H- - 1020321- - 28MM J- - 1020321- - 35MM K- - 5020321- - 42MM N- - 5020321- - 54MM 323 D- - 1020323- - 12MM E- - 1020323- - 15MM G- - 1020323- - 22MM H- - 1020323- - 28MM B- - 5020323- - 8MM C- - 5020323- - 10MM D- - 5020323- - 12MM E- - 5020323- - 15MM F- - 5020323- - 18MM G- - 5020323- - 22MM H- - 5020323- - 28MM J- - 5020323- - 35MM K- - 5020323- - 42MM N- - 5020323- - 54MM 401 DD-1020401- - 12MM EE-1020401- - 15MM FF-1020401- - 18MM GG-1020401- - 22MM HH-1020401- - 28MM JJ-1020401- - 35MM KK-1020401- - 42MM NN-1020401- - 54MM BB-5020401- - 8MM CC-5020401- - 10MM DD-5020401- - 12MM EE-5020401- - 15MM FF-5020401- - 18MM GG-5020401- - 22MM HH-5020401- - 28MM JJ-5020401- - 35MM KK-5020401- - 42MM 401R ED-1020401- - 15x12MM GE-1020401- - 22x15MM DC-5020401- - 12x10MM EC-5020401- - 15x10MM GE-5020401- - 22x15MM HG-5020401- - 28x22MM 401DA EE-1020401DA – 15MM GG-1020401DA – 22MM HH-1020401DA – 28MM 401/O EE-1020401/O – 15MM GG-1020401/O – 22MM HH-1020401/O – 28MM S401S EE-5020401S- 15MM GG-5020401S – 22MM HH-5020401S – 28MM 401V EE-1020401V- 15MM GG-1020401V – 22MM 402 E031020402- - 15 x ½” E041020402- - 15 x ¾” F031020402- - 18 x ½” G041020402- - 22 x ¾” G051020402- - 22 x 1” H041020402- - 28 x ¾” H051020402- - 28 x 1” B015020402- - 8 x ¼” C025020402- - 10 x 3/8” C035020402- - 10 x ½” D025020402- - 12 x 3/8” D035020402- - 12 x ½” E025020402- - 15 x 3/8” E035020402- - 15 x ½” E045020402- - 15 x ¾” F035020402- - 18 x ½” F045020402- - 18 x ¾” G035020402- - 22 x ½” G045020402- - 22 x ¾” H055020402- - 28 x 1” J065020402- - 35 x 1-1/4” K075020402- - 42 x 1-1/2” 402PCB E031020402CB – 15 x ½” x 38MM G041020402CB – 22 x ½” x 38MM 402TA – D021020402TA – 12 x 3/8” D031020402TA – 12 x ½” E021020402TA – 15 x 3/8” E031020402TA – 15 x ½” E041020402TA – 15 x ¾” F041020402TA – 18 x ¾” G041020402TA – 22 x ¾” G051020402TA – 22 x 1” H051020402TA – 28 x 1” 403 D031020403- - 12 X ½” E031020403- - 15 x ½” E041020403- - 15 x ¾” F031020403- - 18 x ½” F041020403- - 18 x ¾” G031020403- - 22 x ½” G041020403- - 22 x ¾” G051020403- - 22 x 1” H041020403- - 28 x ¾” H051020403- - 28 x 1” K071020403- - 42 x 1-1/2” B015020403- - 8 x ¼” C025020403- - 10 x 3/8” C035020403- - 10 x ½” D025020403- - 12 x 3/8” D035020403- - 12 x ½” E025020403- - 15 x 3/8” E035020403- - 15 x ½” E045020403- - 15 x ¾” F045020403- - 18 x ¾” G035020403- - 22 x ½” G045020403- - 22 x ¾” H055020403- - 28 x 1” J065020403- - 35 x 1-1/4” 403SF E031020403SF – 15 x ½” G031020403SF – 22 x ½” G041020403SF – 22 x ¾” E035020403SF – 15 x ½” 403W E031020403W- 15 x ½” E035020403W- 15 x ½” 403WL E031020403WE – 15 x ½” E031020403WL – 15 x ½” G031020403WL – 22 x ½” C035020403WL – 10 x ½” D035020403WL – 12 x ½” E035020403WL – 15 x ½” G045020403WL – 22 x ¾” 601EQ DDD1020601EQ – 12MM EEE1020601EQ – 15MM FFF1020601EQ – 18MM GGG1020601EQ – 22MM HHH1020601EQ – 28MM BBB5020601EQ – 8MM CCC5020601EQ – 10MM DDD5020601EQ – 12MM EEE5020601EQ – 15MM FFF5020601EQ – 18MM GGG5020601EQ – 22MM HHH5020601EQ – 28MM JJJ5020601EQ – 35MM KKK5020601EQ – 42MM 601RB GGE1020601- - 22 x 22 x 15MM HHE1020601- - 28 x 28 x 15MM HHG1020601- - 28 x 28 x 22MM NNE1020601- - 54 x 54 x 15MM NNG1020601- - 54 x 54 x 22MM NNH1020601- - 54 x 54 x 28MM DDC5020601- - 12 x 12 x 10MM EEC5020601- - 15 x 15 x 10MM EED5020601- - 15 x 15 x 12MM FFD5020601- - 18 x 18 x 12MM FFE5020601- - 18 x 18 x 15MM GGD5020601- - 22 x 22 x 12MM GGE5020601- - 22 x 22 x 15MM GGF5020601- - 28 x 28 x 18MM HHE5020601- - 28 x 28 x 15MM HHG5020601- - 28 x 28 x M22M JJE5020601- - 35 x 35 x 15MM JJG5020601- - 35 x 35 x 22MM JJH5020601- - 42 x 42 x 28MM KKE5020601- - 42 x 42 x 15MM KKG5020601- - 42 x 42 x 22MM KKH5020601- - 42 x 42 x 28MM KKJ5020601- - 42 x 42 x 35MM 601RE GEG1020601- - 22 x 15 x 22MM HEH1020601- - 28 x 15 x 28MM GEG5020601- - 22 x 15 x 22MM HGH5020601- - 28 x 22 x 28MM 601REB GEE1020601- - 22 x 15 x 15MM EDD5020601- - 15 x 12 x 12MM GEE5020601- - 22 x 15 x 15MM HGG5020601- - 28 x 22 x 22MM 601REE EEG1020601- - 15 x 15 x 22MM GGH5020601- - 22 x 22 x 28MM 615 EE35020615- - 15 x 15 x ½” GG35020615- - 22 x 22 x ½” GG45020615- - 22 x 22 x ¾” 617 EE11020617- - 15 x 15 x ¼” Ee31020317- - 15 x 15 x ½” EE41020617- - 15 x 15 x ¾” FF31020617- - 18 x 18 x ½” GG31020617- - 22 x 22 x ½” GG51020617- - 22 x 22 x 1” HH41020617- - 28 x 28 x ¾” DD2502617- - 12 x 12 x 3/8” DD3502617- - 12 x 12 x ½” EE3502617- - 15 x 15 x ½” GG3502617- - 22 x 22 x ½” GG4502617- - 22 x 22 x ¾” HH3502617- - 28 x 28 x ½” HH5502617- - 28 x 28 x 1” EE3502617W- - 15 x 15 x ½” GG3502617W- - 22 x 22 x ½” E3E502631- - 15 x ½” x 15MM G4G502631- - 22 x ¾” x 22MM 631 G4G1020631 – 22 x ¾” x 22MM 645 33E1020645- - 22 x ¾” x 22MM 684 G3G1020684 – 22 x ½” x 22MM G4G1020684 – 22 x ¾” X 22MM E3E5020684- - 15 x ½” x 15MM 901 GGGG1020901 – 22 x 22 x 22 x 22MM 301 DD-1020301- - 12MM TT-1020301- - 14MM EE-1020301- - 15MM UU-1020301- - 16MM FF-1020301- - 18MM VV-1020301- - 20MM GG-1020301- - 22MM HH-1020301- - 28MM JJ-1020301- - 35MM 301BH EE-1020301BH – 15mm 301BP DZB1020301BP – 12mm EZB1020301BP – 15mm GZB1020301BP – 22mm 301CO EE5020301CO – 15mm GG5020301CO – 22mm 301DA EE-1020301DA – 15mm GG-1020301DA – 22mm 301V EE-1020301V- 302 D011020302 – 12 x ¼” D021020302 – 12 x -3/8” D031020302 – 12 x ½” E011020302 – 15 x 1/4” E021020302 – 15 x 3/8” E031020302 – 15 x ½” E041020302 – 15 x ¾” F031020302 – 18 x ½” F041020302 – 18 x ¾” G031020302 – 22 x ½” G041020302 – 22 x ¾” G051020302 – 22 x 1” H051020302 – 28 x 1” H061020302 – 28 x 1-1/4” J061020302 – 35 x 1-1/4” K071020302 – 42 x 1-1/2” N081020302 – 54 X 2” 302B E031020302B – 15 x ½” G041020302B- 22 x ¾” H051020302B – 28 x 1” J061020302B – 35 x 1-1/4” K071020302B- 42 x 1-1/2” N081020302B – 54 x2” 302CB E031020302CB – 15 x ½” G041020302CB – 22 x ¾” 302TA D021020302TA – 12 x 3/8” D031020302TA – 12 x ½” T031020302TA – 14 x ½” E021020302TA – 15 x 3/8” E031020302TA – 15 x ½” E041020302TA – 15 x ¾” U031020302TA – 16 x ½” U041020302TA – 16 x ¾” F031020302TA – 18 x ½” F041020302TA – 18 x ¾” G031020302TA – 22 x ½” G041020302TA – 22 x ¾” G051020302TA – 22 x 1” H041020302TA – 28 x ¾” H051020302TA – 28 x 1” 401 ED-1020401 - - 15 x 12mm GE-1020401- - 22 x 15mm 403WE E031020403WE – 15 x ½” 601C EEE5020601C- 15mm GGG5020601C- 22mm

Product Images

Approval Holder:: Conex Universal Limited

Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company

WRAS Approval Number: #240902042

Range of ‘B’ Press XL copper crimped fittings with EPDM ‘O’-rings for use with copper pipe to BS EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240902042
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models Below
Marking:: >‘B’<, Size and DVGW
Installation Requirements:: R001
Expiry date:: 30/09/2029
Model:: P5001 90° Street Bend P5001 06400000 – 64MM P5001 06700000 – 67MM P5001 07600000 – 76MM P5001 08900000 – 89MM P5001 10800000 – 108MM P5002 90° Bend P5002 06400000 – 64MM P5002 06700000 – 67MM P5002 07600000 – 76MM P5002 08900000 – 89MM P5002 10800000 – 108MM P5040 45° Obtuse Street Elbow P5040 06400000 – 64MM P5040 06700000 – 67MM P5040 07600000 – 76MM P5040 08900000 – 89MM P5040 10800000 – 108MM P5041 45° Obtuse Elbow P5041 06400000 – 64MM P5041 06700000 – 67MM P5041 07600000 – 76MM P5041 08900000 – 89MM P5041 10800000 – 108MM P5130 Equal Tee P5130 06400000 – 64MM P5130 06700000 – 67MM P5130 07600000 – 76MM P5130 08900000 – 89MM P5R 108108108 – 108MM P5130G Tee with Female Branch P5130G06406640 – 64 x ¾” BSP x 64MM P5130G06408640 – 64 x 1” BSP X 64MM P5130G06416640 – 64 x 2” BSP X 64MM P5130G06706670 – 67 x ¾” BSP x 67MM P5130G06716670 – 67 x 2” BSP x 67MM P5130G07606760 – 76 x ¾” BSP x 76MM P5130G07616760 – 76 x 2” BSP x 76MM P5130G08906890 – 89 x ¾” BSP x 89MM P5130G08916890 – 89 x 2” BSP x 89MM P5RG108061080 – 108 x ¾” BSP x 108MM P5RG108161080 – 108 x 2” BSP x 108MM P5130RB Tee Reduced Branch P5130 06435640 – 64 x 35 x 64MM P5130 06442650 – 64 x 42 x 64MM P5130 06454640 – 64 x 54 x 64MM P5130 06728670 – 67 x 28 x 67MM P5130 06735670 – 67 x 35 x 67MM P5130 06742670 – 67 x 42 x 67MM P5130 06754670 – 67 x 54 x 67MM P5130 07628760 – 76 x 28 x 76MM P5130 07635760 – 76 x 35 x 76MM P5130 07642760 – 76 x 42 x 76MM P5130 07654760 – 76 x 54 x 76MM P5130 07664760 – 76 x 64 x 76MM P5130 07667760 – 76 x 67 x 76MM P5130 08954890 – 89 x 54 x 89MM P5130 08964890 – 89 x 64 x 89MM P5130 08976890 – 89 x 76 x 89MM P5R 0108054108 – 108 x 54 x 108MM P5R 0108064108 – 108 x 64 x 108MM P5R 0108076108 – 108 x 76 x 108MM P5R 0108089108 – 108 x 89 x 108MM P5230B Flange 45° P5230B06400000 – 64MM P5230B06700000 – 67MM P5230B07600000 – 76MM P5230 076000UK – 76MM P5230B08900000 – 89MM P5230B10800000 – 108MM P5243 Fitting Reducer P5243 06435000 – 64 x 35MM P5243 06442000 – 64 x 42MM P5243 06454000 – 64 X 54MM P5243 06728000 – 67 x 28MM P5243 06735000 – 67 x 35MM P5243 06742000 – 67 x 42MM P5243 06754000 – 67 x 54MM P5243 07628000 – 76 x 28MM P5243 07635000 – 76 x 35MM P5243 07642000 – 76 x 42MM P5243 07654000 – 76 x 54MM P5243 07664000 – 76 x 64MM P5243 07667000 – 76 x 67MM P5243 08954000 – 89 x 54MM P5243 08964000 – 89 x 64MM P5243 08976000 – 89 x 76MM P5243 10854000 – 108 x 54MM P5243 10864000 – 108 x 64MM P5243 10876000 – 108 x 76MM P5243 10889000 – 108 x 89MM P5243G Male Threaded Straight Connector P5243G064200000 – 64 x 2-1/2” BSP P5243G067200000 – 67 x 2-1/2” BSP P5243G076200000 – 76 x 2-1/2” BSP P5243G076024000 – 76 x 3” BSP P5243G089240000 – 89 x 3” BSP P5243G10832000 – 108 X 4” BSP P5270 Straight Connector P5270 06400000 – 64MM P5270 06700000 – 67MM P5270 07600000 – 76MM P5270 08900000 – 89MM P5270 10800000 – 108MM P5270G Female Threaded Straight Connector P5270G06420000 – 64 x 2-1/2” BSP P5270G06720000 – 67 x 2-1/2” BSP P5270G07620000 – 76 x 2-1/2” BSP P5270G07624000 – 76 x 3” BSP P5270G08924000 – 89 x 3” BSP P5270G10832000 – 108 x 4” BSP P5275 Repair Coupling P5275 06400000 – 64MM P5275 06700000 – 67MM P5275 07600000 – 76MM P5275 08900000 – 89MM P5275 10800000 – 108MM P5301 End Cap P5301 06400000 – 64MM P5301 06700000 – 67MM P5301 07600000 – 76MM P5301 08900000 – 89MM P5301 10800000 – 108MM

Product Images

Approval Holder:: Conex Universal Limited

Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company

WRAS Approval Number: #240902057

Range of copper crimped fittings with EPDM ‘O’-rings for use with copper pipe manufactured to EN1057. For above and below ground use. Maximum working pressure 16 Bar. Maximum operating temperature 99°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240902057
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models below
Marking:: Zhuji City logo and size on body.
Installation Requirements:: R001
Expiry date:: 30/09/2029
Model:: 100ENM - Copper Press Straight Coupling PxP: 100ENM12AB - 12mm 100ENM15AB - 15mm 100ENM18AB - 18mm 100ENM22AB - 22mm 100ENM28AB - 28mm 100ENM35AB - 35mm 100ENM42AB - 42mm 100ENM54AB - 54mm 100ENM67AB - 66.7mm 100ENM76AB - 76.1mm 100ENM89AB - 88.9mm 100ENM108AB - 108mm 101ENM - Copper Press Reducing Coupling PxP: 101ENM1512AB - 15mm×12mm 101ENM1514AB - 15mm×14mm 101ENM1615AB - 16mm×15mm 101ENM1812AB - 18mm×12mm 101ENM1815AB - 18mm×15mm 101ENM1817AB - 18mm×17mm 101ENM2215AB - 22mm×15mm 101ENM2218AB - 22mm×18mm 101ENM2815AB - 28mm×15mm 101ENM2818AB - 28mm×18mm 101ENM2822AB - 28mm×22mm 101ENM3522AB - 35mm×22mm 101ENM3528AB - 35mm×28mm 101ENM4222AB - 42mm×22mm 101ENM4228AB - 42mm×28mm 101ENM4235AB - 42mm×35mm 101ENM5428AB - 54mm×28mm 101ENM5435AB - 54mm×35mm 101ENM5442AB - 54mm×42mm 101ENM3515AB - 35mmx15mm 101ENM6754AB - 66.7mmx54mm 101ENM7628AB - 76.1x28mm 101ENM6728AB - 66.7x28mm 101ENM6735AB - 66.7x35mm 101ENM6742AB - 66.7x42mm 102ENM - Copper Press Fitting Reducer FTGxP: 102ENM1512AB - 15mm×12mm 102ENM1812AB - 18mm×12 mm 102ENM1815AB - 18mm×15mm 102ENM2215AB - 22mm×15mm 102ENM2218AB - 22mm×18mm 102ENM2815AB - 28mm×15mm 102ENM2818AB - 28mm×18mm 102ENM2822AB - 28mm×22mm 102ENM3522AB - 35mm×22 mm 102ENM3528AB - 35mm×28 mm 102ENM4222AB - 42mm×22mm 102ENM4228AB - 42mm×28mm 102ENM4235AB - 42mm×35mm 102ENM5422AB - 54mmx22mm 102ENM5428AB - 54mm×28mm 102ENM5435AB - 54mm×35mm 102ENM5442AB - 54mm×42mm 102ENM6728AB - 66.7mm×28mm 102ENM6735AB - 66.7mm×35mm 102ENM6742AB - 66.7mm×42mm 102ENM6754AB - 66.7mm×54mm 102ENM7635AB - 76.1mm×35mm 102ENM7642AB - 76.1mm×42mm 102ENM7654AB - 76.1mm×54mm 102ENM7667AB - 76.1mm×66.7mm 102ENM8954AB - 88.9mm×54mm 102ENM8976AB - 88.9mm×76.1mm 102ENM10842AB - 108mm×42mm 102ENM10854AB - 108mm×54mm 102ENM10867AB - 108mm×66.7mm 102ENM10876AB - 108mm×76.1mm 102ENM10889AB - 108mm×88.9mm 103ENM - Copper Press Elbow - 90°PxP: 103ENM12AB - 12mm 103ENM15AB - 15mm 103ENM18AB - 18mm 103ENM22AB - 22mm 103ENM28AB - 28mm 103ENM35AB - 35mm 103ENM42AB - 42mm 103ENM54AB - 54mm 103ENM67AB - 66.7mm 103ENM76AB - 76.1mm 103ENM89AB - 88.9mm 103ENM108AB - 108mm 104ENM - Copper Press Elbow - 90°(Male / Female) FTGxP: 104ENM12AB - 12mm 104ENM15AB - 15mm 104ENM18AB - 18mm 104ENM22AB - 22mm 104ENM28AB - 28mm 104ENM35AB - 35mm 104ENM42AB - 42mm 104ENM54AB - 54mm 104ENM67AB - 66.7mm 104ENM76AB - 76.1mm 104ENM89AB - 88.9mm 104ENM108AB - 108mm 107ENM - Copper Press Elbow - 45°PxP: 107ENM12AB - 12mm 107ENM15AB - 15mm 107ENM18AB - 18mm 107ENM22AB - 22mm 107ENM28AB - 28mm 107ENM35AB - 35mm 107ENM42AB - 42mm 107ENM54AB - 54mm 107ENM67AB - 66.7mm 107ENM76AB - 76.1mm 107ENM89AB - 88.9mm 107ENM108AB - 108mm 108ENM - Copper Press Elbow - 45°(Male / Female) FTGxP: 108ENM12AB - 12mm 108ENM15AB - 15mm 108ENM18AB - 18mm 108ENM22AB - 22mm 108ENM28AB - 28mm 108ENM35AB - 35mm 108ENM42AB - 42mm 108ENM54AB - 54mm 108ENM67AB - 66.7mm 108ENM76AB - 76.1mm 108ENM89AB - 88.9mm 108ENM108AB - 108mm 111ENM - Copper Press Slip Extended Coupling PxP: 111ENM12AL - 12mm 111ENM15AL - 15mm 111ENM18AL - 18mm 111ENM22AL - 22mm 111ENM28AL - 28mm 111ENM35AL - 35mm 111ENM42AL - 42mm 111ENM54AL - 54mm 111ENM67AL - 66.7mm 111ENM76AL - 76.1mm 111ENM89AL - 88.9mm 111ENM108AL - 108mm 112ENM - Copper Press Equal Tee PxPxP: 112ENM12AB - 12mm 112ENM15AB - 15mm 112ENM18AB - 18mm 112ENM22AB - 22mm 112ENM28AB - 28mm 112ENM35AB - 35mm 112ENM42AB - 42mm 112ENM54AB - 54mm 112ENM67AB - 66.7mm 112ENM76AB - 76.1mm 112ENM89AB - 88.9mm 112ENM108AB - 108mm 113ENM - Copper Press Unequal Tee PxPxP: 113ENM151512AB - 15mm×15mm×12mm 113ENM181812AB - 18mm×18mm×12mm 113ENM181815AB - 18mm×18mm×15mm 113ENM222212AB - 22mm×22mm×12mm 113ENM222215AB - 22mm×22mm×15mm 113ENM222218AB - 22mm×22mm×18mm 113ENM282815AB - 28mm×28mm×15mm 113ENM282818AB - 28mm×28mm×18mm 113ENM282822AB - 28mm×28mm×22mm 113ENM353515AB - 35mm×35mm×15mm 113ENM353522AB - 35mm×35mm×22mm 113ENM353528AB - 35mm×35mm×28mm 113ENM424215AB - 42mm×42mm×15mm 113ENM424222AB - 42mm×42mm×22mm 113ENM424228AB - 42mm×42mm×28mm 113ENM424235AB - 42mm×42mm×35mm 113ENM545415AB - 54mm×54mm×15mm 113ENM545422AB - 54mm×54mm×22mm 113ENM545428AB - 54mm×54mm×28mm 113ENM545435AB - 54mm×54mm×35mm 113ENM545442AB - 54mm×54mm×42mm 113ENM676728AB - 66.7mm×66.7mm×28mm 113ENM676735AB - 66.7mm×66.7mm×35mm 113ENM676742AB - 66.7mm×66.7mm×42mm 113ENM676754AB - 66.7mm×66.7mm×54mm 113ENM767622AB - 76.1mm×76.1mm×22mm 113ENM767628AB - 76.1mm×76.1mm×28mm 113ENM767635AB - 76.1mm×76.1mm×35mm 113ENM767642AB - 76.1mm×76.1mm×42mm 113ENM767654AB - 76.1mm×76.1mm×54mm 113ENM767667AB - 76.1mm×76.1mm×66.7mm 113ENM898954AB - 88.9mm×88.9mm×54mm 113ENM898976AB - 88.9mm×88.9mm×76.1mm 113ENM10810854AB - 108mm×108mm×54mm 113ENM10810867AB - 108mm×108mm×66.7mm 113ENM10810876AB - 108mm×108mm×76.1mm 113ENM10810889AB - 108mm×108mm×89mm 114ENM151212AB - 15mm×12mm×12mm 114ENM151215AB - 15mm×12mm×15mm 114ENM181515AB - 18mm×15mm×15mm 114ENM181518AB - 18mm×15mm×18mm 114ENM221515AB - 22mm×15mm×15mm 114ENM221518AB - 22mm×15mm×18mm 114ENM221522AB - 22mm×15mm×22mm 114ENM221818AB - 22mm×18mm×18mm 114ENM221822AB - 22mm×18mm×22mm 114ENM281528AB - 28mm×15mm×28mm 114ENM282215AB - 28mm×22mm×15mm 114ENM282222AB - 28mm×22mm×22mm 114ENM282228AB - 28mm×22mm×28mm 114ENM352822AB - 35mm×28mm×22mm 114ENM352828AB - 35mm×28mm×28mm 114ENM423542AB - 42mm×35mm×42mm 114ENM542854AB - 54mm×28mm×54mm 114ENM221815AB - 22mmx18mmx15mm 115ENM - Copper Press Unequal Tee PxPxP: 115ENM151522AB - 15mm×15mm×22mm 115ENM121215AB - 12mmx12mmx15mm 115ENM222228AB - 22mmx22mmx28mm 121ENM - Copper Press Reducing Elbow - 90°PxP: 121ENM2215AB - 22mm×15mm 121ENM2815AB - 28x15mm 121ENM2822AB - 28x22mm 137ENM - Copper Press End Cap P: 137ENM12AB - 12mm 137ENM15AB - 15mm 137ENM18AB - 18mm 137ENM22AB - 22mm 137ENM28AB - 28mm 137ENM35AB - 35mm 137ENM42AB - 42mm 137ENM54AB - 54mm 137ENM67AB - 66.7mm 137ENM76AB - 76.1mm 137ENM89AB - 88.9mm 137ENM108AB - 108mm 138ENM - Copper Press Full crossover P x P: 138ENM15AB - 15mm 138ENM18AB - 18mm 138ENM22AB - 22mm 148ENM - Copper Press Partial crossover FTGxP: 148ENM12AB - 12mm 148ENM15AB - 15mm 148ENM18AB - 18mm 148ENM22AB - 22mm 149ENM - Copper Press Street crossover FTGxFTG: 149ENM15AB - 15mm 149ENM18AB - 18mm 149ENM22AB - 22mm 149ENM28AB - 28mm 301ENM - Copper Press Adapter - male thread P x R: 301ENM1210AB - 12mm×3/8” BSP 301ENM1213AB - 12mm×1/2” BSP 301ENM1510AB - 15mm×3/8” BSP 301ENM1513AB - 15mm×1/2” BSP 301ENM1519AB - 15mm×3/4” BSP 301ENM1813AB - 18mm×1/2” BSP 301ENM1819AB - 18mm×3/4” BSP 301ENM2213AB - 22mm×1/2” BSP 301ENM2219AB - 22mm×3/4” BSP 301ENM2225AB - 22mm×1” BSP 301ENM2819AB - 28mm×3/4” BSP 301ENM2825AB - 28mm×1” BSP 301ENM2832AB - 28mm×1-1/4” BSP 301ENM3525AB - 35mm×1” BSP 301ENM3532AB - 35mm×1-1/4” BSP 301ENM4232AB - 42mm×1-1/4” BSP 301ENM4238AB - 42mm×1-1/2” BSP 301ENM5451AB - 54mm×2” BSP 301ENM6764AB - 66.7mm×2-1/2” BSP 301ENM7664AB - 76.1mm×2-1/2” BSP 301ENM7676AB - 76.1mm×3” BSP 301ENM8976AB - 88.9mm×3” BSP 301ENM108102AB - 108mm×4” BSP 301ENM3538AB - 35mmx1-1/2" BSP 301ENM5438AB - 54mmx1-1/2" BSP 302ENM - Copper Press Adapter - Female thread P x Rp: 302ENM1210AB - 12mm×3/8” BSP 302ENM1213AB - 12mm×1/2” BSP 302ENM1510AB - 15mm×3/8” BSP 302ENM1513AB - 15mm×1/2” BSP 302ENM1519AB - 15mm×3/4” BSP 302ENM1819AB - 18mm×3/4” BSP 302ENM2213AB - 22mm×1/2” BSP 302ENM2219AB - 22mm×3/4” BSP 302ENM2225AB - 22mm×1” BSP 302ENM2819AB - 28mm×3/4” BSP 302ENM2825AB - 28mm×1” BSP 302ENM3532AB - 35mm×1-1/4” BSP 302ENM4238AB - 42mm×1-1/2” BSP 302ENM5451AB - 54mm×2” BSP 302ENM6764AB - 66.7mm×2-1/2” BSP 302ENM7664AB - 76.1mm×2-1/2” BSP 302ENM7676AB - 76.1mm×3” BSP 302ENM8976AB - 88.9mm×3” BSP 302ENM108102AB - 108mm×4” BSP 302ENM1813AB - 18mmx1/2" BSP 302ENM2832AB - 28mmx1-1/4" BSP 302ENM3525AB - 35mmx1" BSP 303ENM - Copper Press Adapter - male thread FTG x R: 303ENM1513AB - 15mm×1/2” BSP 303ENM2213AB - 22mm×1/2” BSP 303ENM2219AB - 22mm×3/4” BSP 303ENM1213AB - 12mmx1/2" BSP 303ENM1510AB - 15mmx3/8" BSP 303ENM2825AB - 28mmx1" BSP 303ENM3532AB - 35mmx1-1/4" BSP 304ENM - Copper Press Adapter - Female thread FTG x Rp: 304ENM1513AB - 15mm×1/2” BSP 304ENM2213AB - 22mm×1/2” BSP 304ENM2219AB - 22mm×3/4” BSP 304ENM3525AB - 35mm×1” BSP 304ENM5451AB - 54mm×2” BSP 304ENM1813AB -18mmx1/2" BSP 304ENM2825AB -28mmx1" BSP 305ENM - Copper Press Adapter Union P x P 305ENM1515AB - 15mm 305ENM2222AB - 22mm 305ENM2828AB - 28mm 305ENM3535AB - 35mm 305ENM4242AB - 42mm 305ENM5454AB - 54mm 306ENM - Copper Press Adapter Union - male thread P x R 306ENM1513AB - 15mmx1/2" 306ENM2219AB - 22mmx3/4" 306ENM2825AB - 28mmx1" 306ENM3532AB - 35mmx1-1/4" 306ENM4238AB - 42mmx1-1/2" 306ENM5451AB - 54mmx2" 307ENM - Copper Press Adapter Union - female thread P x Rp 307ENM1513AB - 15mmx1/2" 307ENM2219AB - 22mmx3/4" 307ENM2825AB - 28mmx1" 307ENM3532AB - 35mmx1-1/4" 307ENM4238AB - 42mmx1-1/2" 307ENM5451AB - 54mmx2" 313ENM - Copper Press Adapter Tee - female thread on branch P x P x Rp: 313ENM121213AB - 12mm×12mm×1/2” BSP 313ENM151513AB - 15mm×15mm×1/2” BSP 313ENM181813AB - 18mm×18mm×1/2” BSP 313ENM222213AB - 22mm×22mm×1/2” BSP 313ENM222219AB - 22mm×22mm×3/4” BSP 313ENM282813AB - 28mm×28mm×1/2” BSP 313ENM282819AB - 28mm×28mm×3/4” BSP 313ENM353513AB - 35mm×35mm×1/2” BSP 313ENM424213AB - 42mm×42mm×1/2” BSP 313ENM545413AB - 54mm×54mm×1/2” BSP 313ENM282825AB - 28mmx28mmx1" BSP 313ENM353519AB - 35mmx35mmx3/4" BSP 313ENM353525AB - 35mmx35mmx1" BSP 313ENM353532AB - 35mmx35mmx1-1/4" BSP 313ENM424219AB - 42mmx42mmx3/4" BSP 313ENM424238AB - 42mmx42mmx1-1/2" BSP 313ENM545425AB - 54mmx54mmx1" BSP 313ENM424225AB - 42mmx42mmx1" 313ENM545451AB - 54mmx54mmx2" 314ENM - Copper Press Adapter 90° Elbow - male thread P x R: 314ENM1513AB - 15mm×1/2” BSP 314ENM1813AB - 18mm×1/2” BSP 314ENM2219AB - 22mm×3/4” BSP 314ENM2825AB - 28mm×1” BSP 314ENM1210AB - 12mmx3/8" BSP 314ENM1510AB - 15mmx3/8" BSP 314ENM1819AB - 18mmx3/4" BSP 314ENM3532AB - 35mmx1-1/4" BSP 315ENM - Copper Press Adapter 90° Elbow - female thread P x Rp: 315ENM1513AB - 15mm×1/2” BSP 315ENM1813AB - 18mm×1/2” BSP 315ENM2219AB - 22mm×3/4” BSP 315ENM2825AB - 28mm×1” BSP 315ENM1210AB - 12mmx3/8" BSP 315ENM1213AB - 12mmx1/2" BSP 315ENM1510AB - 15mmx3/8" BSP 315ENM2213AB - 22mmx1/2" BSP 326ENM - Copper Press Female Backplate Elbow P x Rp 326ENM1513AB - 15mmx1/2" 326ENM2219AB - 22mmx3/4" Copper Press UnequalTee PxFTGxP: 142ENM545422AB - 54x54x22mm 142ENM545428AB - 54x54x28mm Copper Press Slip Coupling PxP: 111ENM15AB - 15mm 111ENM18AB - 18mm 111ENM22AB - 22mm 111ENM28AB - 28mm 111ENM35AB - 35mm 111ENM42AB - 42mm 111ENM54AB - 54mm

Product Images

Approval Holder:: Zhuji City Howhi Air Conditioners Made Co Ltd

Company Name
Zhuji City Howhi Air Conditioners Made Co Ltd
Address
Donggong Village, Yangmeiqiao Community, Diankou Diankou Town, Zhuji City, Shaoxing City, Zhejiang Province, China

View All Listings by this Company

WRAS Approval Number: #240904010

B Profile range of 316L & 304 stainless steel press fittings with EPDM ‘O’-rings for use with stainless steel pipe manufactured to EN 10312, for both above and underground use. Joints are achieved by the use of a press fitting tool. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240904010
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: IDC & Banninger, size and SS No. on body.
Installation Requirements:: R001
Expiry date:: 30/09/2029
Model:: Models ending L = SS316L stainless steel, models without L suffix = SS304 stainless steel. 2SBA011 PS13 BEND S/S 15mmxR 1/2 2SBA021 PS13 BEND S/S 18mmxR 1/2 2SBA022 PS13 BEND S/S 18mmxR 3/4 2SBA032 PS13 BEND S/S 22mmxR 3/4 2SBA043 PS13 BEND S/S 28mmxR 1 2SBA054 PS13 BEND S/S 35mmxR 1 1/4 2SBA065 PS13 BEND S/S 42mmxR 1 1/2 2SBA077 PS13 BEND S/S 54mmxR 2 2SBB011 PS14 BEND S/S 15mmxRp 1/2 2SBB021 PS14 BEND S/S 18mmxRp 1/2 2SBB022 PS14 BEND S/S 18mmxRp 3/4 2SBB032 PS14 BEND S/S 22mmxRp 3/4 2SBB043 PS14 BEND S/S 28mmxRp 1 2SBB054 PS14 BEND S/S 35mmxRp 1 1/4 2SBB065 PS14 BEND S/S 42mmxRp 1 1/2 2SBB077 PS14 BEND S/S 54mmxRp 2 2SBC011 PS14 ELBOW S/S 15mmxRp 1/2 2SBC021 PS14 ELBOW S/S 18mmxRp 1/2 2SBC031 PS14 ELBOW S/S 22mmxRp 1/2 2SBC032 PS14 ELBOW S/S 22mmxRp 3/4 2SBC043 PS14 ELBOW S/S 28mmxRp 1 2SBC054 PS14 ELBOW S/S 35mmxRp 1 1/4 2SBD011 SS Press CxMi 90° Elbow 15mmxR 1/2 2SBD021 SS Press CxMi 90° Elbow 18mmxR 1/2 2SBD031 SS Press CxMi 90° Elbow 22mmxR 1/2 2SBD032 SS Press CxMi 90° Elbow 22mmxR 3/4 2SBD043 SS Press CxMi 90° Elbow 28mmxR 1 2SBD054 SS Press CxMi 90° Elbow 35mmxR 1 1/4 2SBD065 SS Press CxMi 90° Elbow 42mmxR 1 1/2 2SBD077 SS Press CxMi 90° Elbow 54mmxR2 2SBE111 PS30 TEE S/S 15mmxRp 1/2x15mm 2SBE212 PS30 TEE S/S 18mmxRp 1/2x18mm 2SBE222 PS30 TEE S/S 18mmxRp 3/4x18mm 2SBE313 PS30 TEE S/S 22mmxRp 1/2x22mm 2SBE323 PS30 TEE S/S 22mmxRp 3/4x22mm 2SBE414 PS30 TEE S/S 28mmxRp 1/2x28mm 2SBE424 PS30 TEE S/S 28mmxRp 3/4x28mm 2SBE434 PS30 TEE S/S 28mmxRp 1x28mm 2SBE515 PS30 TEE S/S 35mmxRp 1/2x35mm 2SBE525 PS30 TEE S/S 35mmxRp 3/4x35mm 2SBE535 PS30 TEE S/S 35mmxRp 1x35mm 2SBE545 PS30 TEE S/S 35mmxRp 1 1/4x35mm 2SBE616 PS30 TEE S/S 42mmxRp 1/2x42mm 2SBE626 PS30 TEE S/S 42mmxRp 3/4x42mm 2SBE636 PS30 TEE S/S 42mmxRp 1x42mm 2SBE656 PS30 TEE S/S 42mmxRp 1 1/2x42mm 2SBE717 PS30 TEE S/S 54mmxRp 1/2x54mm 2SBE727 PS30 TEE S/S 54mmxRp 3/4x54mm 2SBE737 PS30 TEE S/S 54mmxRp 1x54mm 2SBE777 PS30 TEE S/S 54mmxRp 2x54mm 2SBF010 PS3 STR CONN S/S 15mmxR 3/8 2SBF011 PS3 STR CONN S/S 15mmxR 1/2 2SBF012 PS3 STR CONN S/S 15mmxR 3/4 2SBF021 PS3 STR CONN S/S 18mmxR 1/2 2SBF022 PS3 STR CONN S/S 18mmxR 3/4 2SBF031 PS3 STR CONN S/S 22mmxR 1/2 2SBF032 PS3 STR CONN S/S 22mmxR 3/4 2SBF033 PS3 STR CONN S/S 22mmxR 1 2SBF042 PS3 STR CONN S/S 28mmxR 3/4 2SBF043 PS3 STR CONN S/S 28mmxR 1 2SBF044 PS3 STR CONN S/S 28mmxR 1 1/4 2SBF051 PS3 STR CONN S/S 35mmxR 1/2 2SBF053 PS3 STR CONN S/S 35mmxR 1 2SBF054 PS3 STR CONN S/S 35mmxR 1 1/4 2SBF055 PS3 STR CONN S/S 35mmxR 1 1/2 2SBF064 PS3 STR CONN S/S 42mmxR 1 1/4 2SBF065 PS3 STR CONN S/S 42mmxR 1 1/2 2SBF075 PS3 STR CONN S/S 54mmxR 1 1/2 2SBF077 PS3 STR CONN S/S 54mmxR 2 2SBG010 PS2 STR CONN - S/S 15mmxRp 3/8 2SBG011 PS2 STR CONN - S/S 15mmxRp 1/2 2SBG012 PS2 STR CONN - S/S 15mmxRp 3/4 2SBG021 PS2 STR CONN - S/S 18mmxRp 1/2 2SBG022 PS2 STR CONN - S/S 18mmxRp 3/4 2SBG031 PS2 STR CONN - S/S 22mmxRp 1/2 2SBG032 PS2 STR CONN - S/S 22mmxRp 3/4 2SBG033 PS2 STR CONN - S/S 22mmxRp 1 2SBG041 PS2 STR CONN - S/S 28mmxRp 1/2 2SBG042 PS2 STR CONN - S/S 28mmxRp 3/4 2SBG043 PS2 STR CONN - S/S 28mmxRp 1 2SBG044 PS2 STR CONN - S/S 28mmxRp 1 1/4 2SBG053 PS2 STR CONN - S/S 35mmxRp 1 2SBG054 PS2 STR CONN - S/S 35mmxRp 1 1/4 2SBG055 PS2 STR CONN - S/S 35mmxRp 1 1/2 2SBG064 PS2 STR CONN - S/S 42mmxRp 1 1/4 2SBG065 PS2 STR CONN - S/S 42mmxRp 1 1/2 2SBG075 PS2 STR CONN - S/S 54mmxRp 1 1/2 2SBG077 PS2 STR CONN - S/S 54mmxRp 2 2SBH011 PS1S SLIP COUP - S/S 15mm 2SBH022 PS1S SLIP COUP - S/S 18mm 2SBH033 PS1S SLIP COUP - S/S 22mm 2SBH044 PS1S SLIP COUP - S/S 28mm 2SBH055 PS1S SLIP COUP - S/S 35mm 2SBH066 PS1S SLIP COUP - S/S 42mm 2SBH077 PS1S SLIP COUP - S/S 54mm 2SBI011 PS69F SS STRAIGHT CONN 15mmxRp 1/2 2SBI012 PS69F SS STRAIGHT CONN 15mmxRp 3/4 2SBI021 PS69F SS STRAIGHT CONN 18mmxRp 1/2 2SBI022 PS69F SS STRAIGHT CONN 18mmxRp 3/4 2SBI032 PS69F SS STRAIGHT CONN 22mmxRp 3/4 2SBI033 PS69F SS STRAIGHT CONN 22mmxRp 1 2SBI043 PS69F SS STRAIGHT CONN 28mmxRp 1 2SBI044 PS69F SS STRAIGHT CONN 28mmxRp 1 1/4 2SBI054 PS69F SS STRAIGHT CONN 35mmxRp 1 1/4 2SBI065 PS69F SS STRAIGHT CONN 42mmxRp 1 1/2 2SBI077 PS69F SS STRAIGHT CONN 54mmxRp 2 2SBJ011 PS69 SS STRAIGHT CONN 15mmxR 1/2 2SBJ012 PS69 SS STRAIGHT CONN 15mmxR 3/4 2SBJ021 PS69 SS STRAIGHT CONN 18mmxR 1/2 2SBJ022 PS69 SS STRAIGHT CONN 18mmxR 3/4 2SBJ031 PS69 SS STRAIGHT CONN 22mmxR 1/2 2SBJ032 PS69 SS STRAIGHT CONN 22mmxR 3/4 2SBJ033 PS69 SS STRAIGHT CONN 22mmxR 1 2SBJ043 PS69 SS STRAIGHT CONN 28mmxR 1 2SBJ044 PS69 SS STRAIGHT CONN 28mmxR 1 1/4 2SBJ054 PS69 SS STRAIGHT CONN 35mmxR 1 1/4 2SBJ065 PS69 SS STRAIGHT CONN 42mmxR 1 1/2 2SBJ077 PS69 SS STRAIGHT CONN 54mmxR 2 2SBK011 PS43 SS FLAT FACE UNION 15mmxG 1/2 2SBK012 PS43 SS FLAT FACE UNION 15mmxG 3/4 2SBK021 PS43 SS FLAT FACE UNION 18mmxG 1/2 2SBK022 PS43 SS FLAT FACE UNION 18mmxG 3/4 2SBK032 PS43 SS FLAT FACE UNION 22mmxG 3/4 2SBK033 PS43 SS FLAT FACE UNION 22mmxG 1 2SBK043 PS43 SS FLAT FACE UNION 28mmxG 1 2SBK044 PS43 SS FLAT FACE UNION 28mmxG 1 1/4 2SBK054 PS43 SS FLAT FACE UNION 35mmxG 1 1/4 2SBK055 PS43 SS FLAT FACE UNION 35mmxG 1 1/2 2SBK065 PS43 SS FLAT FACE UNION 42mmxG 1 1/2 2SBK067 PS43 SS FLAT FACE UNION 42mmxG 2 2SBK077 PS43 SS FLAT FACE UNION 54mmxG 2 2SBM011 P12S STREET BEND S/S 15mm 2SBM022 P12S STREET BEND S/S 18mm 2SBM033 P12S STREET BEND S/S 22mm 2SBM044 P12S STREET BEND S/S 28mm 2SBM055 P12S STREET BEND S/S 35mm 2SBM066 P12S STREET BEND S/S 42mm 2SBM077 P12S STREET BEND S/S 54mm 2SBN011 PS12 BEND - S/S 15mm 2SBN022 PS12 BEND - S/S 18mm 2SBN033 PS12 BEND - S/S 22mm 2SBN044 PS12 BEND - S/S 28mm 2SBN055 PS12 BEND - S/S 35mm 2SBN066 PS12 BEND - S/S 42mm 2SBN077 PS12 BEND - S/S 54mm 2SC7011 PS50 90DEG STREET BEND 15mm 2SC7022 PS50 90DEG STREET BEND 18mm 2SC7033 PS50 90DEG STREET BEND 22mm 2SC7044 PS50 90DEG STREET BEND 28mm 2SC7055 PS50 90DEG STREET BEND 35mm 2SC7066 PS50 90DEG STREET BEND 42mm 2SC7077 PS50 90DEG STREET BEND 54mm 2SBO011 PS21S 45DEG ST BEND S/S 15mm 2SBO022 PS21S 45DEG ST BEND S/S 18mm 2SBO033 PS21S 45DEG ST BEND S/S 22mm 2SBO044 PS21S 45DEG ST BEND S/S 28mm 2SBO055 PS21S 45DEG ST BEND S/S 35mm 2SBO066 PS21S 45DEG ST BEND S/S 42mm 2SBO077 PS21S 45DEG ST BEND S/S 54mm 2SBP011 PS21 OBTUSE BEND S/S 15mm 2SBP022 PS21 OBTUSE BEND S/S 18mm 2SBP033 PS21 OBTUSE BEND S/S 22mm 2SBP044 PS21 OBTUSE BEND S/S 28mm 2SBP055 PS21 OBTUSE BEND S/S 35mm 2SBP066 PS21 OBTUSE BEND S/S 42mm 2SBP077 PS21 OBTUSE BEND S/S 54mm 2SC8011 PS51 CROSS SHORT S/S 15mm 2SC8022 PS51 CROSS SHORT S/S 18mm 2SC8033 PS51 CROSS SHORT S/S 22mm 2SC8044 PS51 CROSS SHORT S/S 28mm 2SC9011 PS52 CROSS LONG S/S 15mm 2SC9022 PS52 CROSS LONG S/S 18mm 2SC9033 PS52 CROSS LONG S/S 22mm 2SC9044 PS52 CROSS LONG S/S 28mm 2SBQ111 PS24 EQUAL TEE S/S 15mm 2SBQ222 PS24 EQUAL TEE S/S 18mm 2SBQ333 PS24 EQUAL TEE S/S 22mm 2SBQ444 PS24 EQUAL TEE S/S 28mm 2SBQ555 PS24 EQUAL TEE S/S 35mm 2SBQ666 PS24 EQUAL TEE S/S 42mm 2SBQ777 PS24 EQUAL TEE S/S 54mm 2SBQ121 PS25 RB TEE S/S 15mmx18mmx15mm 2SBQ211 PS25 RB TEE S/S 18mmx15mmx18mm 2SBQ212 PS25 RB TEE S/S 18mmx15mmx18mm 2SBQ313 PS25 RB TEE S/S 22mmx15mmx22mm 2SBQ323 PS25 RB TEE S/S 22mmx18mmx22mm 2SBQ414 PS25 RB TEE S/S 28mmx15mmx28mm 2SBQ424 PS25 RB TEE S/S 28mmx18mmx28mm 2SBQ434 PS25 RB TEE S/S 28mmx22mmx28mm 2SBQ515 PS25 RB TEE S/S 35mmx15mmx35mm 2SBQ525 PS25 RB TEE S/S 35mmx18mmx35mm 2SBQ535 PS25 RB TEE S/S 35mmx22mmx35mm 2SBQ545 PS25 RB TEE S/S 35mmx28mmx35mm 2SBQ616 PS25 RB TEE S/S 42mmx15mmx42mm 2SBQ626 PS25 RB TEE S/S 42mmx18mmx42mm 2SBQ636 PS25 RB TEE S/S 42mmx22mmx42mm 2SBQ646 PS25 RB TEE S/S 42mmx28mmx42mm 2SBQ656 PS25 RB TEE S/S 42mmx35mmx42mm 2SBQ717 PS25 RB TEE S/S 54mmx15mmx54mm 2SBQ727 PS25 RB TEE S/S 54mmx18mmx54mm 2SBQ737 PS25 RB TEE S/S 54mmx22mmx54mm 2SBQ747 PS25 RB TEE S/S 54mmx28mmx54mm 2SBQ757 PS25 RB TEE S/S 54mmx35mmx54mm 2SBQ767 PS25 RB TEE S/S 54mmx42mmx54mm 2SBR021 PS6 FITT RED - S/S 18mmx15mm 2SBR031 PS6 FITT RED - S/S 22mmx15mm 2SBR032 PS6 FITT RED - S/S 22mmx18mm 2SBR041 PS6 FITT RED - S/S 28mmx15mm 2SBR042 PS6 FITT RED - S/S 28mmx18mm 2SBR043 PS6 FITT RED - S/S 28mmx22mm 2SBR051 PS6 FITT RED - S/S 35mmx15mm 2SBR052 PS6 FITT RED - S/S 35mmx18mm 2SBR053 PS6 FITT RED - S/S 35mmx22mm 2SBR054 PS6 FITT RED - S/S 35mmx28mm 2SBR061 PS6 FITT RED - S/S 42mmx15mm 2SBR062 PS6 FITT RED - S/S 42mmx18mm 2SBR063 PS6 FITT RED - S/S 42mmx22mm 2SBR064 PS6 FITT RED - S/S 42mmx28mm 2SBR065 PS6 FITT RED - S/S 42mmx35mm 2SBR071 PS6 FITT RED - S/S 54mmx15mm 2SBR072 PS6 FITT RED - S/S 54mmx18mm 2SBR072 PS6 FITT RED - S/S 54mmx22mm 2SBR074 PS6 FITT RED - S/S 54mmx28mm 2SBR075 PS6 FITT RED - S/S 54mmx35mm 2SBR076 PS6 FITT RED - S/S 54mmx42mm 2SBS011 PS1 COUPLER - S/S 15mm 2SBS022 PS1 COUPLER - S/S 18mm 2SBS033 PS1 COUPLER - S/S 22mm 2SBS044 PS1 COUPLER - S/S 28mm 2SBS055 PS1 COUPLER - S/S 35mm 2SBS066 PS1 COUPLER - S/S 42mm 2SBS077 PS1 COUPLER - S/S 54mm 2SBT011 PS61 STOP END - S/S 15mm 2SBT022 PS61 STOP END - S/S 18mm 2SBT033 PS61 STOP END - S/S 22mm 2SBT044 PS61 STOP END - S/S 28mm 2SBT055 PS61 STOP END - S/S 35mm 2SBT066 PS61 STOP END - S/S 42mm 2SBT077 PS61 STOP END - S/S 54mm 2SBS021 REDUCED COUPLER 18mmx15mm 2SBS031 REDUCED COUPLER 22mmx15mm 2SBS032 REDUCED COUPLER 22mmx18mm 2SBS041 REDUCED COUPLER 28mmx15mm 2SBS042 REDUCED COUPLER 28mmx18mm 2SBS043 REDUCED COUPLER 28mmx22mm 2SBS053 REDUCED COUPLER 35mmx22mm 2SBS054 REDUCED COUPLER 35mmx28mm 2SBS063 REDUCED COUPLER 42mmx22mm 2SBS064 REDUCED COUPLER 42mmx28mm 2SBS065 REDUCED COUPLER 42mmx35mm 2SBS074 REDUCED COUPLER 54mmx28mm 2SBS075 REDUCED COUPLER 54mmx35mm 2SBS076 REDUCED COUPLER 54mmx42mm 2SBV011 SS Press CxFi 90° Swivel Connector 15mmxG 1/2 2SBV021 SS Press CxFi 90° Swivel Connector 18mmxG 1/2 2SBV020 SS Press CxFi 90° Swivel Connector 18mmxG 3/8 2SBV032 SS Press CxFi 90° Swivel Connector 22mmxG 3/4 2SBV043 SS Press CxFi 90° Swivel Connector 28mmxG 1 2SBV054 SS Press CxFi 90° Swivel Connector 35mmxG 1 1/4 2SBV065 SS Press CxFi 90° Swivel Connector 42mmxG 1 1/2 2SBV077 SS Press CxFi 90° Swivel Connector 54mmxG 2 2SB9011 SS Press Full Crossover Coupler 15mm 2SB9022 SS Press Full Crossover Coupler 18mm 2SB9033 SS Press Full Crossover Coupler 22mm 2SB9044 SS Press Full Crossover Coupler 28mm 2SBW110 SS Press CXCXMi Branch Tee 15mmx15mmxR 3/8 2SBW111 SS Press CXCXMi Branch Tee 15mmx15mmxR 1/2 2SBW221 SS Press CXCXMi Branch Tee 18mmx18mmxR 1/2 2SBW222 SS Press CXCXMi Branch Tee 18mmx18mmxR 3/4 2SBW332 SS Press CXCXMi Branch Tee 22mmx22mmxR 3/4 2SBW443 SS Press CXCXMi Branch Tee 28mmx28mmxR 1 2SBW554 SS Press CXCXMi Branch Tee 35mmx35mmxR 1 1/4 2SBX011 SS Press flange adapter PN16 15mm 2SBX022 SS Press flange adapter PN16 18mm 2SBX033 SS Press flange adapter PN16 22mm 2SBX044 SS Press flange adapter PN16 28mm 2SBX055 SS Press flange adapter PN16 35mm 2SBX066 SS Press flange adapter PN16 42mm 2SBX077 SS Press flange adapter PN16 54mm 2SBA011L PS13 BEND S/S 15mmxR 1/2 2SBA021L PS13 BEND S/S 18mmxR 1/2 2SBA022L PS13 BEND S/S 18mmxR 3/4 2SBA032L PS13 BEND S/S 22mmxR 3/4 2SBA043L PS13 BEND S/S 28mmxR 1 2SBA054L PS13 BEND S/S 35mmxR 1 1/4 2SBA065L PS13 BEND S/S 42mmxR 1 1/2 2SBA077L PS13 BEND S/S 54mmxR 2 2SBB011L PS14 BEND S/S 15mmxRp 1/2 2SBB021L PS14 BEND S/S 18mmxRp 1/2 2SBB022L PS14 BEND S/S 18mmxRp 3/4 2SBB032L PS14 BEND S/S 22mmxRp 3/4 2SBB043L PS14 BEND S/S 28mmxRp 1 2SBB054L PS14 BEND S/S 35mmxRp 1 1/4 2SBB065L PS14 BEND S/S 42mmxRp 1 1/2 2SBB077L PS14 BEND S/S 54mmxRp 2 2SBC011L PS14 ELBOW S/S 15mmxRp 1/2 2SBC021L PS14 ELBOW S/S 18mmxRp 1/2 2SBC031L PS14 ELBOW S/S 22mmxRp 1/2 2SBC032L PS14 ELBOW S/S 22mmxRp 3/4 2SBC043L PS14 ELBOW S/S 28mmxRp 1 2SBC054L PS14 ELBOW S/S 35mmxRp 1 1/4 2SBD011L SS Press CxMi 90° Elbow 15mmxR 1/2 2SBD021L SS Press CxMi 90° Elbow 18mmxR 1/2 2SBD031L SS Press CxMi 90° Elbow 22mmxR 1/2 2SBD032L SS Press CxMi 90° Elbow 22mmxR 3/4 2SBD043L SS Press CxMi 90° Elbow 28mmxR 1 2SBD054L SS Press CxMi 90° Elbow 35mmxR 1 1/4 2SBD065L SS Press CxMi 90° Elbow 42mmxR 1 1/2 2SBD077L SS Press CxMi 90° Elbow 54mmxR2 2SBE111L PS30 TEE S/S 15mmxRp 1/2x15mm 2SBE212L PS30 TEE S/S 18mmxRp 1/2x18mm 2SBE222L PS30 TEE S/S 18mmxRp 3/4x18mm 2SBE313L PS30 TEE S/S 22mmxRp 1/2x22mm 2SBE323L PS30 TEE S/S 22mmxRp 3/4x22mm 2SBE414L PS30 TEE S/S 28mmxRp 1/2x28mm 2SBE424L PS30 TEE S/S 28mmxRp 3/4x28mm 2SBE434L PS30 TEE S/S 28mmxRp 1x28mm 2SBE515L PS30 TEE S/S 35mmxRp 1/2x35mm 2SBE525L PS30 TEE S/S 35mmxRp 3/4x35mm 2SBE535L PS30 TEE S/S 35mmxRp 1x35mm 2SBE545L PS30 TEE S/S 35mmxRp 1 1/4x35mm 2SBE616L PS30 TEE S/S 42mmxRp 1/2x42mm 2SBE626L PS30 TEE S/S 42mmxRp 3/4x42mm 2SBE636L PS30 TEE S/S 42mmxRp 1x42mm 2SBE656L PS30 TEE S/S 42mmxRp 1 1/2x42mm 2SBE717L PS30 TEE S/S 54mmxRp 1/2x54mm 2SBE727L PS30 TEE S/S 54mmxRp 3/4x54mm 2SBE737L PS30 TEE S/S 54mmxRp 1x54mm 2SBE777L PS30 TEE S/S 54mmxRp 2x54mm 2SBF010L PS3 STR CONN S/S 15mmxR 3/8 2SBF011L PS3 STR CONN S/S 15mmxR 1/2 2SBF012L PS3 STR CONN S/S 15mmxR 3/4 2SBF021L PS3 STR CONN S/S 18mmxR 1/2 2SBF022L PS3 STR CONN S/S 18mmxR 3/4 2SBF031L PS3 STR CONN S/S 22mmxR 1/2 2SBF032L PS3 STR CONN S/S 22mmxR 3/4 2SBF033L PS3 STR CONN S/S 22mmxR 1 2SBF042L PS3 STR CONN S/S 28mmxR 3/4 2SBF043L PS3 STR CONN S/S 28mmxR 1 2SBF044L PS3 STR CONN S/S 28mmxR 1 1/4 2SBF051L PS3 STR CONN S/S 35mmxR 1/2 2SBF053L PS3 STR CONN S/S 35mmxR 1 2SBF054L PS3 STR CONN S/S 35mmxR 1 1/4 2SBF055L PS3 STR CONN S/S 35mmxR 1 1/2 2SBF064L PS3 STR CONN S/S 42mmxR 1 1/4 2SBF065L PS3 STR CONN S/S 42mmxR 1 1/2 2SBF075L PS3 STR CONN S/S 54mmxR 1 1/2 2SBF077L PS3 STR CONN S/S 54mmxR 2 2SBG010L PS2 STR CONN - S/S 15mmxRp 3/8 2SBG011L PS2 STR CONN - S/S 15mmxRp 1/2 2SBG012L PS2 STR CONN - S/S 15mmxRp 3/4 2SBG021L PS2 STR CONN - S/S 18mmxRp 1/2 2SBG022L PS2 STR CONN - S/S 18mmxRp 3/4 2SBG031L PS2 STR CONN - S/S 22mmxRp 1/2 2SBG032L PS2 STR CONN - S/S 22mmxRp 3/4 2SBG033L PS2 STR CONN - S/S 22mmxRp 1 2SBG041L PS2 STR CONN - S/S 28mmxRp 1/2 2SBG042L PS2 STR CONN - S/S 28mmxRp 3/4 2SBG043L PS2 STR CONN - S/S 28mmxRp 1 2SBG044L PS2 STR CONN - S/S 28mmxRp 1 1/4 2SBG053L PS2 STR CONN - S/S 35mmxRp 1 2SBG054L PS2 STR CONN - S/S 35mmxRp 1 1/4 2SBG055L PS2 STR CONN - S/S 35mmxRp 1 1/2 2SBG064L PS2 STR CONN - S/S 42mmxRp 1 1/4 2SBG065L PS2 STR CONN - S/S 42mmxRp 1 1/2 2SBG075L PS2 STR CONN - S/S 54mmxRp 1 1/2 2SBG077L PS2 STR CONN - S/S 54mmxRp 2 2SBH011L PS1S SLIP COUP - S/S 15mm 2SBH022L PS1S SLIP COUP - S/S 18mm 2SBH033L PS1S SLIP COUP - S/S 22mm 2SBH044L PS1S SLIP COUP - S/S 28mm 2SBH055L PS1S SLIP COUP - S/S 35mm 2SBH066L PS1S SLIP COUP - S/S 42mm 2SBH077L PS1S SLIP COUP - S/S 54mm 2SBI011L PS69F SS STRAIGHT CONN 15mmxRp 1/2 2SBI012L PS69F SS STRAIGHT CONN 15mmxRp 3/4 2SBI021L PS69F SS STRAIGHT CONN 18mmxRp 1/2 2SBI022L PS69F SS STRAIGHT CONN 18mmxRp 3/4 2SBI032L PS69F SS STRAIGHT CONN 22mmxRp 3/4 2SBI033L PS69F SS STRAIGHT CONN 22mmxRp 1 2SBI043L PS69F SS STRAIGHT CONN 28mmxRp 1 2SBI044L PS69F SS STRAIGHT CONN 28mmxRp 1 1/4 2SBI054L PS69F SS STRAIGHT CONN 35mmxRp 1 1/4 2SBI065L PS69F SS STRAIGHT CONN 42mmxRp 1 1/2 2SBI077L PS69F SS STRAIGHT CONN 54mmxRp 2 2SBJ011L PS69 SS STRAIGHT CONN 15mmxR 1/2 2SBJ012L PS69 SS STRAIGHT CONN 15mmxR 3/4 2SBJ021L PS69 SS STRAIGHT CONN 18mmxR 1/2 2SBJ022L PS69 SS STRAIGHT CONN 18mmxR 3/4 2SBJ031L PS69 SS STRAIGHT CONN 22mmxR 1/2 2SBJ032L PS69 SS STRAIGHT CONN 22mmxR 3/4 2SBJ033L PS69 SS STRAIGHT CONN 22mmxR 1 2SBJ043L PS69 SS STRAIGHT CONN 28mmxR 1 2SBJ044L PS69 SS STRAIGHT CONN 28mmxR 1 1/4 2SBJ054L PS69 SS STRAIGHT CONN 35mmxR 1 1/4 2SBJ065L PS69 SS STRAIGHT CONN 42mmxR 1 1/2 2SBJ077L PS69 SS STRAIGHT CONN 54mmxR 2 2SBK011L PS43 SS FLAT FACE UNION 15mmxG 1/2 2SBK012L PS43 SS FLAT FACE UNION 15mmxG 3/4 2SBK021L PS43 SS FLAT FACE UNION 18mmxG 1/2 2SBK022L PS43 SS FLAT FACE UNION 18mmxG 3/4 2SBK032L PS43 SS FLAT FACE UNION 22mmxG 3/4 2SBK033L PS43 SS FLAT FACE UNION 22mmxG 1 2SBK043L PS43 SS FLAT FACE UNION 28mmxG 1 2SBK044L PS43 SS FLAT FACE UNION 28mmxG 1 1/4 2SBK054L PS43 SS FLAT FACE UNION 35mmxG 1 1/4 2SBK055L PS43 SS FLAT FACE UNION 35mmxG 1 1/2 2SBK065L PS43 SS FLAT FACE UNION 42mmxG 1 1/2 2SBK067L PS43 SS FLAT FACE UNION 42mmxG 2 2SBK077L PS43 SS FLAT FACE UNION 54mmxG 2 2SBM011L P12S STREET BEND S/S 15mm 2SBM022L P12S STREET BEND S/S 18mm 2SBM033L P12S STREET BEND S/S 22mm 2SBM044L P12S STREET BEND S/S 28mm 2SBM055L P12S STREET BEND S/S 35mm 2SBM066L P12S STREET BEND S/S 42mm 2SBM077L P12S STREET BEND S/S 54mm 2SBN011L PS12 BEND - S/S 15mm 2SBN022L PS12 BEND - S/S 18mm 2SBN033L PS12 BEND - S/S 22mm 2SBN044L PS12 BEND - S/S 28mm 2SBN055L PS12 BEND - S/S 35mm 2SBN066L PS12 BEND - S/S 42mm 2SBN077L PS12 BEND - S/S 54mm 2SC7011L PS50 90DEG STREET BEND 15mm 2SC7022L PS50 90DEG STREET BEND 18mm 2SC7033L PS50 90DEG STREET BEND 22mm 2SC7044L PS50 90DEG STREET BEND 28mm 2SC7055L PS50 90DEG STREET BEND 35mm 2SC7066L PS50 90DEG STREET BEND 42mm 2SC7077L PS50 90DEG STREET BEND 54mm 2SBO011L PS21S 45DEG ST BEND S/S 15mm 2SBO022L PS21S 45DEG ST BEND S/S 18mm 2SBO033L PS21S 45DEG ST BEND S/S 22mm 2SBO044L PS21S 45DEG ST BEND S/S 28mm 2SBO055L PS21S 45DEG ST BEND S/S 35mm 2SBO066L PS21S 45DEG ST BEND S/S 42mm 2SBO077L PS21S 45DEG ST BEND S/S 54mm 2SBP011L PS21 OBTUSE BEND S/S 15mm 2SBP022L PS21 OBTUSE BEND S/S 18mm 2SBP033L PS21 OBTUSE BEND S/S 22mm 2SBP044L PS21 OBTUSE BEND S/S 28mm 2SBP055L PS21 OBTUSE BEND S/S 35mm 2SBP066L PS21 OBTUSE BEND S/S 42mm 2SBP077L PS21 OBTUSE BEND S/S 54mm 2SC8011L PS51 CROSS SHORT S/S 15mm 2SC8022L PS51 CROSS SHORT S/S 18mm 2SC8033L PS51 CROSS SHORT S/S 22mm 2SC8044L PS51 CROSS SHORT S/S 28mm 2SC9011L PS52 CROSS LONG S/S 15mm 2SC9022L PS52 CROSS LONG S/S 18mm 2SC9033L PS52 CROSS LONG S/S 22mm 2SC9044L PS52 CROSS LONG S/S 28mm 2SBQ111L PS24 EQUAL TEE S/S 15mm 2SBQ222L PS24 EQUAL TEE S/S 18mm 2SBQ333L PS24 EQUAL TEE S/S 22mm 2SBQ444L PS24 EQUAL TEE S/S 28mm 2SBQ555L PS24 EQUAL TEE S/S 35mm 2SBQ666L PS24 EQUAL TEE S/S 42mm 2SBQ777L PS24 EQUAL TEE S/S 54mm 2SBQ121L PS25 RB TEE S/S 15mmx18mmx15mm 2SBQ211L PS25 RB TEE S/S 18mmx15mmx18mm 2SBQ212L PS25 RB TEE S/S 18mmx15mmx18mm 2SBQ313L PS25 RB TEE S/S 22mmx15mmx22mm 2SBQ323L PS25 RB TEE S/S 22mmx18mmx22mm 2SBQ414L PS25 RB TEE S/S 28mmx15mmx28mm 2SBQ424L PS25 RB TEE S/S 28mmx18mmx28mm 2SBQ434L PS25 RB TEE S/S 28mmx22mmx28mm 2SBQ515L PS25 RB TEE S/S 35mmx15mmx35mm 2SBQ525L PS25 RB TEE S/S 35mmx18mmx35mm 2SBQ535L PS25 RB TEE S/S 35mmx22mmx35mm 2SBQ545L PS25 RB TEE S/S 35mmx28mmx35mm 2SBQ616L PS25 RB TEE S/S 42mmx15mmx42mm 2SBQ626L PS25 RB TEE S/S 42mmx18mmx42mm 2SBQ636L PS25 RB TEE S/S 42mmx22mmx42mm 2SBQ646L PS25 RB TEE S/S 42mmx28mmx42mm 2SBQ656L PS25 RB TEE S/S 42mmx35mmx42mm 2SBQ717L PS25 RB TEE S/S 54mmx15mmx54mm 2SBQ727L PS25 RB TEE S/S 54mmx18mmx54mm 2SBQ737L PS25 RB TEE S/S 54mmx22mmx54mm 2SBQ747L PS25 RB TEE S/S 54mmx28mmx54mm 2SBQ757L PS25 RB TEE S/S 54mmx35mmx54mm 2SBQ767L PS25 RB TEE S/S 54mmx42mmx54mm 2SBR021L PS6 FITT RED - S/S 18mmx15mm 2SBR031L PS6 FITT RED - S/S 22mmx15mm 2SBR032L PS6 FITT RED - S/S 22mmx18mm 2SBR041L PS6 FITT RED - S/S 28mmx15mm 2SBR042L PS6 FITT RED - S/S 28mmx18mm 2SBR043L PS6 FITT RED - S/S 28mmx22mm 2SBR051L PS6 FITT RED - S/S 35mmx15mm 2SBR052L PS6 FITT RED - S/S 35mmx18mm 2SBR053L PS6 FITT RED - S/S 35mmx22mm 2SBR054L PS6 FITT RED - S/S 35mmx28mm 2SBR061L PS6 FITT RED - S/S 42mmx15mm 2SBR062L PS6 FITT RED - S/S 42mmx18mm 2SBR063L PS6 FITT RED - S/S 42mmx22mm 2SBR064L PS6 FITT RED - S/S 42mmx28mm 2SBR065L PS6 FITT RED - S/S 42mmx35mm 2SBR071L PS6 FITT RED - S/S 54mmx15mm 2SBR072L PS6 FITT RED - S/S 54mmx18mm 2SBR072L PS6 FITT RED - S/S 54mmx22mm 2SBR074L PS6 FITT RED - S/S 54mmx28mm 2SBR075L PS6 FITT RED - S/S 54mmx35mm 2SBR076L PS6 FITT RED - S/S 54mmx42mm 2SBS011L PS1 COUPLER - S/S 15mm 2SBS022L PS1 COUPLER - S/S 18mm 2SBS033L PS1 COUPLER - S/S 22mm 2SBS044L PS1 COUPLER - S/S 28mm 2SBS055L PS1 COUPLER - S/S 35mm 2SBS066L PS1 COUPLER - S/S 42mm 2SBS077L PS1 COUPLER - S/S 54mm 2SBT011L PS61 STOP END - S/S 15mm 2SBT022L PS61 STOP END - S/S 18mm 2SBT033L PS61 STOP END - S/S 22mm 2SBT044L PS61 STOP END - S/S 28mm 2SBT055L PS61 STOP END - S/S 35mm 2SBT066L PS61 STOP END - S/S 42mm 2SBT077L PS61 STOP END - S/S 54mm 2SBS021L REDUCED COUPLER 18mmx15mm 2SBS031L REDUCED COUPLER 22mmx15mm 2SBS032L REDUCED COUPLER 22mmx18mm 2SBS041L REDUCED COUPLER 28mmx15mm 2SBS042L REDUCED COUPLER 28mmx18mm 2SBS043L REDUCED COUPLER 28mmx22mm 2SBS053L REDUCED COUPLER 35mmx22mm 2SBS054L REDUCED COUPLER 35mmx28mm 2SBS063L REDUCED COUPLER 42mmx22mm 2SBS064L REDUCED COUPLER 42mmx28mm 2SBS065L REDUCED COUPLER 42mmx35mm 2SBS074L REDUCED COUPLER 54mmx28mm 2SBS075L REDUCED COUPLER 54mmx35mm 2SBS076L REDUCED COUPLER 54mmx42mm 2SBV011L SS Press CxFi 90° Swivel Connector 15mmxG 1/2 2SBV021L SS Press CxFi 90° Swivel Connector 18mmxG 1/2 2SBV020L SS Press CxFi 90° Swivel Connector 18mmxG 3/8 2SBV032L SS Press CxFi 90° Swivel Connector 22mmxG 3/4 2SBV043L SS Press CxFi 90° Swivel Connector 28mmxG 1 2SBV054L SS Press CxFi 90° Swivel Connector 35mmxG 1 1/4 2SBV065L SS Press CxFi 90° Swivel Connector 42mmxG 1 1/2 2SBV077L SS Press CxFi 90° Swivel Connector 54mmxG 2 2SB9011L SS Press Full Crossover Coupler 15mm 2SB9022L SS Press Full Crossover Coupler 18mm 2SB9033L SS Press Full Crossover Coupler 22mm 2SB9044L SS Press Full Crossover Coupler 28mm 2SBW110L SS Press CXCXMi Branch Tee 15mmx15mmxR 3/8 2SBW111L SS Press CXCXMi Branch Tee 15mmx15mmxR 1/2 2SBW221L SS Press CXCXMi Branch Tee 18mmx18mmxR 1/2 2SBW222L SS Press CXCXMi Branch Tee 18mmx18mmxR 3/4 2SBW332L SS Press CXCXMi Branch Tee 22mmx22mmxR 3/4 2SBW443L SS Press CXCXMi Branch Tee 28mmx28mmxR 1 2SBW554L SS Press CXCXMi Branch Tee 35mmx35mmxR 1 1/4 2SBX011L SS Press flange adapter PN16 15mm 2SBX022L SS Press flange adapter PN16 18mm 2SBX033L SS Press flange adapter PN16 22mm 2SBX044L SS Press flange adapter PN16 28mm 2SBX055L SS Press flange adapter PN16 35mm 2SBX066L SS Press flange adapter PN16 42mm 2SBX077L SS Press flange adapter PN16 54mm Models ending L = SS316L stainless steel, models without L suffix = SS304 stainless steel. SS316L stainless steel models are for use with SS316L stainless steel pipe manufactured to EN 10312, with dimension of pipe: O.D. x wall thickness 1: 15mmx1mm 18mmx1mm 22mmx1.2mm 28mmx1.2mm 35mmx1.5mm 42mmx1.5mm 54mmx1.5mm O.D. x wall thickness 2: 15mmx0.6mm 18mmx0.7mm 22mmx0.7mm 28mmx0.8mm 35mmx1.0mm 42mmx1.1mm 54mmx1.2mm SS304 stainless steel models are for use with SS304 stainless steel pipe manufactured to EN 10312, with dimension of pipe: O.D. x wall thickness 1: 15mmx1mm 18mmx1mm 22mmx1.2mm 28mmx1.2mm 35mmx1.5mm 42mmx1.5mm 54mmx1.5mm O.D. x wall thickness 2: 15mmx0.6mm 18mmx0.7mm 22mmx0.7mm 28mmx0.8mm 35mmx1.0mm 42mmx1.1mm 54mmx1.2mm

Product Images

Approval Holder:: Ningbo IDC International Trading Co. Ltd.

Company Name
Ningbo IDC International Trading Co. Ltd.
Address
Floor 43, Building A, International Trade Center, Ningbo Chamber of Commerce, No. 558 of Taikangzhong Road, Yinzhou District, Ningbo
Country
China

View All Listings by this Company
Manufacturer:: Zhejiang Banninger Piping System Ltd.

Company Name
Zhejiang Banninger Piping System Ltd.
Address
Bingang INUSTRIAL CITY YUHUAN ZHEJIANG

View All Listings by this Company

WRAS Approval Number: #240904028

Range of R-154 stainless steel pressed collars incorporating stainless steel bodies (304L or 316L) and are only to be used with stainless steel pipe. Maximum working pressure for sizes up to DN150 (FCM models) or DN125 (FCI models) is 25.0 bar. Maximum working pressure for size DN200 (FCM models) or DN150 and DN200 (FCI models) is 16.0 bar. Maximum operating temperature 99°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240904028
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN 40 to DN 200.
Marking:: Nords, batch ID, size and material grade inkjet on collar.
Installation Requirements:: R001
Expiry date:: 30/09/2029
Model:: FCM0604420DHS. FCM0404420DHS. FCM0605420DHS. FCM0405420DHS. FCM0606920DHS. FCM0406920DHS. FCM0608420DHS. FCM0408420DHS. FCM0610630SPE. FCM0410630SPE. FCM0613130DHS. FCM0413130DHS. FCM0615630SPE. FCM0415630SPE. FCI0604820DHS. FCI0404820DHS. FCI0606020DHS. FCI0406020DHS. FCI0607620DHS. FCI0407620DHS. FCI0608820DHS. FCI0408820DHS. FCI0611430SPE. FCI0411430SPE. FCI0613930DHS. FCI0413930DHS. FCM0620630DHS. FCM0420630DHS. FCI0616826DHS. FCI0416826DHS. FCI0621930DHS. FCI0421930DHS.

Product Images

Approval Holder:: Nords International AB

Company Name
Nords International AB
Address
Prostårdsvägen 2 Molkom
Postcode
SE-65560
Country
Sweden
General Email
ralph.abraham@nordsinternational.com

View All Listings by this Company
Manufacturer:: Nords International AB

Company Name
Nords International AB
Address
Prostårdsvägen 2 Molkom
Postcode
SE-65560
Country
Sweden
General Email
ralph.abraham@nordsinternational.com

View All Listings by this Company

WRAS Approval Number: #240602071

Silicon Bronze bodies Press Fittings with EPDM `O`-rings. For use with copper pipe manufactured in accordance with BS EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240602071
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Sizes are in mm Pressfit
Marking:: KEMPRESS, SANHA, the letter of "K-Tick", DVGW, CUSI & size on fitting body.
Installation Requirements:: R001
Expiry date:: 30/06/2029
Model:: Silicon Bronze Fitting (CW724R) J07132 22mmx 1/2" Female Tee J07077 28mmx1/2" Female Tee J07078 28mm x 3/4" Female Tee J07079 35mmx1/2" Female Tee J07080 42mmx1/2" Female Tee J07099 15mmx1/2" Wallplate Elbow J07100 22mmx3/4" Wallplate Elbow J07133 15mmx1/2"90° Elbow Female Coupling J07134 15mmx3/4" 90° Elbow Female Coupling J07135 22mmx1/2" 90° Elbow Female Coupling J07136 22mmx3/4" 90° Elbow Female Coupling J07137 22mmx1" 90° Elbow Female Coupling J07138 28mmx1/2" 90° Elbow Female Coupling J07139 28mmx3/4" 90°Elbow Female Coupling J07140 28mmx1" 90° Elbow Female Coupling J07141 35mmx1-1/4" 90° Elbow Female Coupling J07142 42mmx1-1/2" 90° Elbow Female Coupling J07143 54mmx2" 90° Elbow Female Coupling J07149 15mmx1/2" 90° Elbow Male Coupling J07150 15mmx3/4" 90° Elbow Male Coupling J07151 22mmx1/2" 90° Elbow Male Coupling J07152 22mmx3/4" 90° Elbow Male Coupling J07153 22mmx1" 90° Elbow Male Coupling J07154 28mmx1" 90° Elbow Male Coupling J07155 35mmx1-1/4" 90° Elbow Male Coupling J07156 42mmx1-1/2" 90° Elbow Male Coupling J07157 54mmx2" 90° Elbow Male Coupling J07081 15mmx1/2" Male Coupling J07082 15mmx3/4" Male Coupling J07083 22mmx1/2" Male Coupling J07084 22mmx3/4" Male Coupling J07085 28mmx3/4" Male Coupling J07086 28mmx1" Male Coupling J07087 35mmx1-1/4" Male Coupling J07088 42mmx1-1/2" Male Coupling J07089 54mmx2" Male Coupling J07229 67mmx2-1/2" Male Coupling J07230 76mmx3" Male Coupling J07231 108mmx4" Male Coupling J07090 15mmx1/2" Female Coupling J07091 15mmx3/4" Female Coupling J07092 22mmx1/2" Female Coupling J07093 22mmx3/4" Female Coupling J07094 28mmx3/4" Female Coupling J07095 28mmx1" Female Coupling J07096 35mmx1-1/4" Female Coupling J07097 42mmx1-1/2" Female Coupling J07098 54mmx2" Female Coupling J07232 67mmx2-1/2" Female Coupling J07238 76mmx2-1/2" Female Coupling J07144 15mmx3/4" Union Adaptor J07101 22mmx3/4" Union Adaptor J07233 76mmx3" Union Adaptor J07239 15mm Cu End Cap J07240 22mm Cu End Cap J07241 28mm Cu End Cap

Approval Holder:: Kembla (HK) Limited

Company Name
Kembla (HK) Limited
Country
China
Phone
+852 2833 9308
General Email
charles.tam@kembla.com.hk

View All Listings by this Company