'OKS 1035/1'. Colourless (transparent) Silicone Oil lubricant. Apply as per manufacturer's Product Information dated '13.02.2024'. Between March 2024 and July 2024, the material is for use with water up to 60°C. Between August 2024 and March 2029, the material is for use with water up to 85°C.

Section:

5160 Lubricants

Expiry date:

31/03/2029

Approval Holder:

OKS Spezialschmierstoffe GmbH

Company Name

OKS Spezialschmierstoffe GmbH

Address

Ganghoferstrasse 47, 82216 Maisach, Gernlinden

Country

Germany

View All Listings by this Company

‘TECHNYL ® SAFE A 219WFC V50 BK’. Black coloured, injection moulded, glass reinforced PA66 material. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240355033

Expiry date:

31/03/2029

Approval Holder:

POLYTECHNYL S.A.S. Member of DOMO Chemicals

Company Name

POLYTECHNYL S.A.S. Member of DOMO Chemicals

Address

Usine de Belle Etoile, Avenue Albert Ramboz, 69190 SAINT-FONS

Country

France

View All Listings by this Company

'Icorene 1440 NAT & Icorene 1440 BLK 9001'. Natural (appears off-white) & black, rotationally moulded polyethylene materials. For use with water up to 23°C.

Section:

5245 Polyethylene

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240355007

Expiry date:

31/03/2029

Approval Holder:

Schulman Gainsborough Ltd. (A Lyondell Basell Company)

Company Name

Schulman Gainsborough Ltd. (A Lyondell Basell Company)

Address

Sandars Road, Heapham Road Industrial Estate, Gainsborough, Lincs.

Postcode

DN21 1RZ

View All Listings by this Company

'NORYL FE1410PW - 801' (appears yellow-cream coloured) & 'NORYL FE1410PW - 960' (light-grey coloured). Injection moulded PPE & PS materials. For use with water up to 85°C.

Section:

5253 Polyphenylene Ether (PPE)

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2211570

Expiry date:

30/11/2027

Approval Holder:

SHPP B.V.

Company Name

SHPP B.V.

Address

Plasticslaan 1 Bergen Op Zoom, 4612PX

Country

Netherlands

View All Listings by this Company

XYRON™ WG725 AWY2139 (off-white). XYRON™ WG725 AWY6633 (beige). XYRON™ WG725 AWY3328 (black) XYRON™ WG735 AWY3327 (black) XYRON™ WG735 AWY2138 (grey). XYRON™ WG735 AWY2272 (grey) XYRON™ WG735 AWY6632 (beige). Injection moulded, Modified Polyphenylene Ether materials. For use with water up to 85°C.

Section:

5253 Polyphenylene Ether (PPE)

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240355018

Expiry date:

31/03/2029

Approval Holder:

Asahi Kasei Corporation

Company Name

Asahi Kasei Corporation

Address

Hibiya Mitsui Tower, 1‐1‐2 Yurakucho, Chiyoda‐ku, Tokyo, 100‐0006

Country

Japan

View All Listings by this Company

'TCM CPRO'. Site applied, two-part (supplied with internal mixing nozzle so no manual mixing required), brown coloured chemical anchor resin. Apply as per manufacturer's instructions dated 02.03.2019. Cure for 4 days@5°C. For use with water up to 23°C. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5311 Resin Anchors

Expiry date:

30/11/2028

Approval Holder:

Trutek Fasteners Polska Sp. z.o.o.

Company Name

Trutek Fasteners Polska Sp. z.o.o.

Address

ul. Wojska Polskiego 3, 39-300 Mielec

Country

Poland

View All Listings by this Company

'ERIKS 559706'. Black coloured, EPDM 'O' ring with a vulcanised joint, manufactured by extrusion. Shore hardness 70 ShA. Tested in-radius size 8.0mm. For use with water up to 23°C.

Section:

5360 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - components.

WRAS Approval Number:

240255034

Expiry date:

28/02/2029

Approval Holder:

ERIKS Nederland

Company Name

ERIKS Nederland

Address

Toermalijnstraat 5, 1812 RL Alkmaar, Postbus 280, 1800, 1BL Alkmaar

Country

Netherlands

View All Listings by this Company

'EP70-S3150/B1-73898 'O' rings'. Black coloured, injection moulded EPDM 'O' rings. Shore hardness 70. Tested in-radius size between 0.5mm & 3.0mm. For use with water up to 85°C.

Section:

5360 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - components.

WRAS Approval Number:

240155044

Expiry date:

31/01/2029

Approval Holder:

Blatt & Co GmbH

Company Name

Blatt & Co GmbH

Address

IM Klauenfuss 16, D 74172 Neckarsulm

Country

Germany

Phone

Tel: +49 7132 976117

View All Listings by this Company

'EPDM 5518 Seal 3G'. Black coloured, compression moulded, EPDM rubber seal. Shore hardness 58. Tested in-radius size 1.92mm. For use with water up to 23°C.

Section:

5360 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - components.

WRAS Approval Number:

240755002

Expiry date:

31/07/2029

Approval Holder:

Gulf Rubber Group - Tumedei SpA

Company Name

Gulf Rubber Group - Tumedei SpA

Address

Via Bolzano 12, 38061 Ala (TN)

Country

Italy

View All Listings by this Company

'EW gasket material'. Black coloured, injection moulded, EPDM gasket material. Shore hardness 65A. Tested in-radius size 3.9mm. For use with water up to 65°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240355009

Expiry date:

31/03/2029

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

Country

Belgium

General Email

ed.mccarson@victaulic.com

View All Listings by this Company