FLOMASTA range of polypropolene fittings for use with PE pipe (manufactured to EN 12201). Maximum working pressure 16 bar. Cold water use.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2207402

Note:

For above and below ground use

Size:

20mm – 63mm.

Marking:

Flomasta, WRAS, PN & size on nut.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

FLOMASTA compression fittings 20-63mm 320*****U ADAPTOR MALE FLOMASTA 320A*****U ADAPTOR FEMALE FLOMASTA 320B*****U END PLUG FLOMASTA 320C*****U FLANGED ADAPTOR FLOMASTA 320D*****U FLANGED ADAPTOR (4 BOLTS)FLOMASTA 321******U COUPLING FLOMASTA 321A*****U REDUCING COUPLING FLOMASTA 321B*****U REPAIR COUPLING FLOMASTA 322******U ELBOW 90 FLOMASTA 322A*****U ELBOW THREADED MALE FLOMASTA 322C*****U ELBOW FEMALE for POP-UP FLOMASTA 322B*****U ELBOW THREADED FEMALE FLOMASTA 322D*****U WALL ELBOW COMPRESSION FLOMASTA 323******U TEE THREADED FEMALE FLOMASTA 323A*****U TEE THREADED MALE FLOMASTA 324******U TEE 90° ELYSEE FLOMASTA 324A*****U TEE REDUCING FLOMASTA 321C*****U UNIVERSAL ADAPTOR FLOMASTA Where XXX-YYY-ZZZ for product family cocdes with only 3 digits 330 (standard code prefix) – yyy (1st end diameter) -zzz (2nd end diameter) Xxx(x)-yyy-zz for product family codes with e altter as a firth digit 330A (A standard code) – (063) yyy diameter – (06) zz threaded diameter.

Approval Holder:

Kingfisher International Products Ltd

Company Name

Kingfisher International Products Ltd

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Range of system 2000 of flange adaptors and connectors with ductile iron bodies (Blue Epoxy Coated) incorporating EPDM seals. For use with PE pipe manufactured to En 12201 & PVC Pipe manufactured to DIN 8062. Maximum working pressure: 16.0Bar Cold water use only.

Section:

1220 Fittings for use with Tube and Pipe

Section Subtitle:

Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.

WRAS Approval Number:

241002051

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models below

Marking:

Hawle logo and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

System 2000 Range: 0400 DN50 – DN600 0430 DN63 – DN355 5045 DN80 & DN100 8075 DN63 – DN315 8515 DN63 – DN225 8525 DN63 – DN225 8535 DN63 – DN315 8545 DN63 – DN315 8555 DN63 – DN315 8557 DN63 – DN315

Approval Holder:

E-Hawle Armaturenwerke GmbH

Company Name

E-Hawle Armaturenwerke GmbH

Address

Wagrainer Stabe 13 AT 4840 Vocklabruck

View All Listings by this Company

Range of copper or stainless-steel brazed heat exchangers available with various number of plates as listed below. Maximum working pressure 25.0 Bar (copper brazed models). Maximum working pressure 10.0 Bar (stainless steel brazed models). Maximum operating temperature 100.0°C.

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

4G3/4 models = ¾” BSP, 4AYB models = 8mm porthole (XB05H-1-xx-2STS_10/10_S1_4AYB Only) or 15mm porthole for all other models, 4clip models = 15mm ID clip connection.

Marking:

DANFOSS logo, model code, date of manufacture (YYYY/WW), PN and other technical data laser engraved into the body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

XB05M-1-xx-2CU_25/25_S1_4G3/4, XB05X-1-xx-2CU_25/25_S1_4G3/4, XB05H-1-xx-2CU_25/25_S1_4G3/4, XB05X-1-xx-2STS_10/10_S1_4G3/4, XB05H-1-xx-2STS_10/10_S1_4G3/4, XB05H-1-xx-2CU_25/25_S1_4AYB, XB05X-1-xx-2CU_25/25_S1_4AYB, XB05H-1-xx-2STS_10/10_S1_4AYB, XB05X-1-xx-2STS_10/10_S1_4AYB, XB05H-1-xx-2STS_10/10_S1_4AYB, XB05X-1-20-2CU_25/25_S1_4Clip, XB05X-1-20-2STS_10/10_S1_4Clip, XB05H-1-xx-2CU_25/25_S1_4Clip, XB05H-1-xx-2STS_10/10_S1_4Clip. XB05 - frame size (XB05 = 312 mm x 76 mm) M, X, H - heatplate corrugation (different dimple design) - 1 - one pass heat exchanger (all XB05 range is one pass) “xx” = number of plates from 8 to 70. HP material = always 2; meaning material of heatplate which is always 1.4404. Brazing material = Stainless steel brazed = StS, Copper brazed = Cu. Pressure = approved pressure for primary and secondary channels (for XB05 is 25 bar when copper brazed and 10 bar when stainless steel brazed visible from application list in 202_f2). Connection configuration = position of connections (on XB05 only S1 applies). Connection type = G3/4 threaded ¾ connections AYB -no connections. Clip - tailormade solder and / or clip connections; usually tailormade for specific customer.

Approval Holder:

Danfoss A/S

Company Name

Danfoss A/S

Address

Nordborgvej 81 6430 Nordborg

Country

Denmark

Phone

+74 88 22 22

General Email

danfoss@danfoss.com

View All Listings by this Company

Range of in-line water meters with plastic bodies. The inlet incorporates a plastic filter. Maximum working pressure; 16 Bar Maximum operating temperature 50°C

Section:

1505 Water Meters

WRAS Approval Number:

240902069

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

All models available in body lengths of 165, 170 and 190mm

Size:

1" BSP (M)

Marking:

Arad logo, Model and technical information on faceplate. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

PD GLADIATOR Q3=4 1124XXXX With 3P register 1132XXXX- With 3G register

Approval Holder:

Arad GROUP Ltd.

Company Name

Arad GROUP Ltd.

Address

Kibbutz Dalia 1923900 Kibutzz Dalia

Country

Israel

Phone

+972-4-9897906

General Email

Dars@arad.co.il

View All Listings by this Company

Manufacturer:

Arad GROUP Ltd.

Company Name

Arad GROUP Ltd.

Address

Kibbutz Dalia 1923900 Kibutzz Dalia

Country

Israel

Phone

+972-4-9897906

General Email

Dars@arad.co.il

View All Listings by this Company

Range of IUW ultrasonic water meters with blue epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Maximum operating temperature: 50°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models below, note all sizes listed in DN are flanged connections.

Marking:

Zenner, DN, Year of manufacture (YYYY) and technical information on dial face. Size & flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

IUW Q3-25, DN50, Length 200mm IUW Q3-25, DN50, Length 270mm IUW Q3-25, DN50, Length 300mm IUW Q3-40, DN65, Length 200mm IUW Q3-40, DN65, Length 300mm IUW Q3-63, DN80, Length 225mm IUW Q3-63, DN80, Length 300mm IUW Q3-63, DN80, Length 225mm IUW Q3-63, DN80, Length 200mm IUW Q3-100, DN100, Length 360mm IUW Q3-100, DN100, Length 350mm IUW Q3-100, DN100, Length 250mm IUW Q3-160, DN125, Length 250mm IUW Q3-250, DN150, Length 300mm IUW Q3-250, DN150, Length 500mm IUW Q3-400, DN200, Length 350mm IUW Q3-630, DN250, Length 450mm IUW Q3-1000, DN300, Length 500mm

Approval Holder:

Zenner International Gmbh & Co. KG

Company Name

Zenner International Gmbh & Co. KG

Address

Heinrich‐Barth‐Str. 29, 66115 Saarbrücken, Germany

Country

Germany

View All Listings by this Company