Directory Search Results

Print List

#240904718

Range of Compress 5800i AW vertical cased and insulated indirect unvented stainless steel hot water storage cylinders fitted with a Caleffi 309508 CST temperature and pressure relief valve set at 10 bar & 90°C, and supplied with a Caleffi inlet control group consisting of in-line pressure reducing valve (set at 3.5 bar) and pressure relief valve (set at 6 bar) and incorporates an approved check valve cartridge (verified by test suitable for backflow protection against Fluid Category 2). The cyclinders also supplied with an 18L expansion vessel and Intatec filling loop assembley (FL12041510). Maximum working pressure 10 bar. Maximum operating temperature 80°C.

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
22mm compression.
Marking:
Bosch, Model, Serial No, Pressure ratings, Capacity and other technical information on adhesive label on control box.
Installation Requirements:
R001 R140 R360
Expiry date:
30/09/2029
Model:
7 731 600 271 CS5800iAW 180 MCP (Slimline) 7 731 600 272 CS5800iAW 210 MP 7 731 600 273 CS5800iAW 250 MP
Product Images

Approval Holder:
Worcester Bosch
Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company
Manufacturer:
Worcester Bosch
Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company

Print This Approval


#241204706

Range of air venting valves with blue epoxy coated ductile iron bodies and a plastic float. Maximum working pressure16.0 bar. Cold water use only.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
241204706
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN50, DN80, DN100, DN150, DN200, DN250
Marking:
Bermad, size, model, PN, serial number on body.
Installation Requirements:
R001 R535
Expiry date:
30/09/2029
Model:
C70-2" C70-3" C70-4" C70-6" C70-8" C70-10"

Approval Holder:
Bermad CS Ltd
Company Name
Bermad CS Ltd
Address
Kibbutz Evron 2280800, Israel

View All Listings by this Company
Manufacturer:
Bermad CS Ltd
Company Name
Bermad CS Ltd
Address
Kibbutz Evron 2280800, Israel

View All Listings by this Company

Print This Approval


#240904011

Range of wall mounted bar type shower mixing valve (brass body, various finishes - see model). The product incorporates a ceramic cartridge headwork with a single lever operating member. The hose outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240904011
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Hose and handset not supplied.
Size:
¾” x ½” off set union
Marking:
Villeroy & Boch logo on operating member.
Installation Requirements:
R001 R020
Expiry date:
30/09/2029
Model:
TVS106301150XX Dawn TVS108009000XX Embrace TVS106301153XX Dawn XX= Finishing 61= Chrome 64=Brushed Nickel 76=Brushed gold K5= Matt black
Product Images

Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval


#240904024

Range of T-type thermostatic blending valves with nickel plated brass bodies and EPDM ‘O’-rings. The inlet and outlet incorporate an approved check valve cartridge ((verified by test - suitable for backflow protection against fluid category 2). Models with compression ends are to be used with copper pipe EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240904024
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
Company logo, flow, mix, H&C moulded on body. Company logo Ivanci printed on cap, CR etched on inlet connection
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2029
Model:
U0121.G15.0002-0000: ½” BSP (M) U0121.G20.0002-0000: ¾” BSP(M) U0121.015.0002-0000: 15mm compression
Product Images

Approval Holder:
Zhejiang Fansheng Fluid Control Co., LTD
Company Name
Zhejiang Fansheng Fluid Control Co., LTD
Address
Putian Industrial Area Chumen Area Yuhuan City Zhejiang Province
Postcode
317605
Country
China

View All Listings by this Company
Manufacturer:
Zhejiang Fansheng Fluid Control Co., LTD
Company Name
Zhejiang Fansheng Fluid Control Co., LTD
Address
Putian Industrial Area Chumen Area Yuhuan City Zhejiang Province
Postcode
317605
Country
China

View All Listings by this Company

Print This Approval


#240904029

Range of concealed, wall mounted thermostatic blending valves with brass bodies (chromium plated trim sets). The products consist of a two-way diverter and a thermostatic cartridge controlling the temperature. All models incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240904029
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models.
Marking:
Gessi backplate
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2029
Model:
65222+63011 linear Venti20 2 ways (3/4” BSP F), 63012+63011 linear classic 2 ways (3/4” BSP F), 65224+63013 linear Venti20 3 ways (3/4” BSP F), 63014+63013 linear classico 3 ways (3/4” BSP F), 65226+63015 linear Venti20 4 ways (3/4” BSP F), 63016+63015 linear classic 4 ways (3/4” BSP F), 65232+63001 compact Venti20 2 ways (1/2” BSP F), 65234+63001 compact Venti20 3 ways(1/2” BSP F), 63006+63001 compact classic 3 ways (1/2” BSP F), 65242+63055 mixer Venti20 2 ways(1/2” BSP F), 63079+63055 mixer classic 2 ways(1/2” BSP F), 65244+63055 mixer Venti20 3 ways (1/2” BSP F), 63081+63055 mixer classic 3 ways (1/2” BSP F).
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#240904031

Range of T-type thermostatic blending valves with DZR brass bodies. Maximum working pressure 14.0 bar. Maximum operating temperature 90°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240904031
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Please refer to model.
Marking:
Caleffi logo & CR on body. Caleffi and product info on cap.
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2029
Model:
523150 (DN20): ¾” BSP(M). 523160 (DN25): 1” BSP (M). 523170 (DN32): 1¼” BSP (M). 523180 (DN40): 1 ½” BSP (M). 523190 (DN50): 2” BSP(M).
Product Images

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#240904032

Range of T-type thermostatic mixing valves with DZR brass bodies. Maximum working pressure 14.0 bar. Maximum operating temperature 100°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240904032
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M) - 2” BSP (M).
Marking:
Caleffi and product info on cap. Caleffi Solar and CR on body.
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2029
Model:
252151: DN20 – ¾” BSP (M). 252160: DN25 – 1” BSP (M). 252170: DN32 - 1¼” BSP (M). 252180: DN40 – 1½” BSP (M). 252190: DN50 – 2” BSP (M).
Product Images

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#240988012

Range of wall mounted concealed thermostatic shower valves (brass bodies – various finishes) incorporating a manual diverter to shower outlets and quarter turn ceramic disc headwork controlling the flow with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member. Both inlets incorporate approved single check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 75°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240988012
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compression
Marking:
PPI on faceplate
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2029
Model:
803252 X XXX X XXX Denotes the following: First X: Different handle option & face plate and the second, third & fourth XXX for different finishes: Handles/Face plate : without suffix indicates no handle / different handle and plate option – C, E or V (Dome or Lever type) Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.
Product Images

Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval


#241188003

Range of wall mounted bar type thermostatic shower valves (brass bodies – various finishes) incorporating quarter turn ceramic disc headwork which controls the flow with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with an optional flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241188003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compression or ½” x ¾” off-set unions.
Marking:
PPI on body
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2029
Model:
801528 X XXX X XXX Denotes the following: First X: Different handle and the second, third & fourth XXX for different finishes: Handles: A (Dome type) Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1. This valve is supplied with Fast Fit connections or S Shape fixing kit. This valve will be supplied with an optional Flow Regulator

Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval


#240988015

Range of wall mounted bar type thermostatic shower valves (brass bodies – various finishes) incorporating ceramic disc headwork which controls the flow to 2 outlets with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with an optional flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240988015
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Not supplied with shower hose, shower handset or overhead shower outlet.
Size:
½”x ¾” BSP (M) offset unions or 15mm compression
Marking:
PPI on body
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2029
Model:
801525 X XXX 801524 X XXX X XXX Denotes the following: First X: Different handle and the second, third & fourth XXX for different finishes: Handles: A (Dome type) Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1. This valve is supplied with Fast Fit connections or S Shape fixing kit. This valve will be supplied with an optional Flow Regulator.
Product Images

Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval


#240988016

Range of wall mounted bar type thermostatic shower valves (brass bodies – various finishes) incorporating quarter turn ceramic disc headwork which controls the flow with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with an optional flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240988016
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½”x ¾” BSP (M) offset unions or 15mm compression.
Marking:
PPI on body
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2029
Model:
801510 X XXX 801509 X XXX 801508 X XXX X XXX Denotes the following: First X: Different handle and the second, third & fourth XXX for different finishes: Handles: A or B (Dome or Lever type) Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1. This valve is supplied with Fast Fit connections or S Shape fixing kit. This valve will be supplied with an optional Flow Regulator.
Product Images

Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval


#240888002

Range of wall mounted, thermostatic bar shower mixers (brass bodies – various finishes), incorporating a quarter turn ceramic disc headwork that controls the flow with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge with dome type operating member that incorporates a manual override button. Models 483841 incorporate a half turn ceramic disc headwork that diverts the flow to an overhead shower or shower handset. Both inlets incorporate an approved check valve cartridge and stainless steel strainers however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models 248683 & 287697 Maximum working pressure 10 bar. Maximum operating temperature 65 C. Model 483841 Maximum working pressure 5 bar. Maximum operating temperature 60 C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240888002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Models 483841 are supplied with an overhead shower, shower hose & handset. Models 248683 & 287697 are supplied with a shower hose and handset.
Size:
½”x ¾” BSP (M) offset unions 15mm compression
Marking:
248683 CPS on body 287697 iflo on body 483841 iflo on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/08/2029
Model:
248683 Thermo bar mixer cool touch and single mode kit 287697 iflo woodcote thermostatic shower 483841 iflo Ashby Thermostatic Bar Mixer Shower

Approval Holder:
The Highbourne Group, City Plumbing Supplies
Company Name
The Highbourne Group, City Plumbing Supplies
Address
Branch Support Centre Highbourne House Highbourne House Crick Northampton
Postcode
NN6 7SL
Country
United Kingdom
Phone
07342 078865
General Email
Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Print This Approval


#241002006

Range of wall mounted, thermostatic shower valves with brass bodies (various finishes) incorporating ceramic disc headwork with dome type operating members which controls and diverts the flow between the two shower outlets. The temperature is controlled independently via a thermostatic cartridge with dome type operating member that incorporates a manual override button. The inlet to the overhead shower incorporates a plastic flow regulator. The inlets to the valve body and the outlet to the shower handset incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with an overhead shower outlet, riser rail, shower hose and handset Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4" BSP (M) X 1/2" BSP offset union (M).
Marking:
Hansgrohe on body, shower pole and head
Installation Requirements:
R001 R030
Expiry date:
31/10/2029
Model:
24 222 xx0 Hansgrohe Pulsify S Puro Showerpipe 260 1jet with thermostat. 24 223 xx0 Hansgrohe Pulsify S Puro Showerpipe 260 1jet EcoSmart with thermostat. 24 236 xx0 Hansgrohe Pulsify S Puro Showerpipe 260 1jet with thermostat and hand shower 3jet. 24 237 xx0 Hansgrohe Pulsify S Puro Showerpipe 260 1jet EcoSmart with thermostat and hand shower 3jet. Models added April 2025: 28 078 xx0 & 28083 xx0. Model added September 2025: 28 076 xx0. Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#241002021

Range of wall mounted (some concealed – see models) thermostatic blending valves with brass bodies (various finishes), incorporating single sequential headworks with single lever operating members. The inlet couplings incorporate plastic flow regulators & metal strainers. The outlets incorporate approved check valve cartridges, however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002021
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models.
Marking:
Taizhou Evergreat on the handle.
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
EG1909001 – chrome plating – ¾” BSP (F) (concealed), EG1909001MB – matt black – ¾” BSP (F) (concealed), EG1909001BB – brushed gold – ¾” BSP (F) (concealed), EG1909001BRN – brushed nickel – ¾” BSP (F) (concealed), EG1909002 – chrome plating – ¾” BSP (F) (concealed), EG1909002MB – matt black – ¾” BSP (F) (concealed), EG1909002BB – brushed gold – ¾” BSP (F) (concealed), EG1909002BRN – brushed nickel – ¾” BSP (F) (concealed). EG1606009 – chrome plating - 3/4" BSP M x 1/2" BSP M Union Offset, EG1606010 – chrome plating - 3/4" BSP M x 1/2" BSP M Union Offset, EG1606011 – chrome plating - 3/4" BSP M x 1/2" BSP M Union Offset.
Product Images

Approval Holder:
Taizhou Evergreat Plumbing & Sanitary Ware Co., Ltd
Company Name
Taizhou Evergreat Plumbing & Sanitary Ware Co., Ltd
Address
Xiaqiu Industrial Area Qinggang Town Yuhuan
Country
China
General Email
sales@tzevergreat.com

View All Listings by this Company
Manufacturer:
Taizhou Evergreat Plumbing & Sanitary Ware Co., Ltd
Company Name
Taizhou Evergreat Plumbing & Sanitary Ware Co., Ltd
Address
Xiaqiu Industrial Area Qinggang Town Yuhuan
Country
China
General Email
sales@tzevergreat.com

View All Listings by this Company

Print This Approval


#241002024

Range of thermostatic, concealed, 2 and 3 outlet shower valves with (brass bodies - various finishes) incorporating a thermostatic cartridge controlling the temperature and diverter cartridge which also controls the flow. The 2 outlet models, the cartridge only controls flow. The products contain an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow prevention. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002024
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP female
Marking:
ZHONG RUI YI SHENG on faceplate.
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
Thermostatic concealed push button 2 outlet shower valve. Only differ in finishes. WJ6185203H CH WJ6185203H BBR WJ6185203H BBL WJ6185203H MB WJ6185203H BRZ Thermostatic concealed push button 3 outlet shower valve. Only differ in finishes. WJ6185303H CH WJ6185303H BBR WJ6185303H BBL WJ6185303H MB WJ6185303H BRZ

Approval Holder:
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Company Name
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Address
Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave., JiaojiangDistrict, Taizhou City, Zhejiang Province, China.(318000)

View All Listings by this Company

Print This Approval


#241002110

Range of T type thermostatic blending valves with (brass bodies - chrome plated finishes). The inlets incorporate a stainless-steel strainer. ISO models incorporate a servicing valve on each inlet. For use with copper pipe (BS EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002110
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See Model
Marking:
VIR logo, Model, flow arrow and WRAS on body. Technical information on cap.
Installation Requirements:
R001 R010 R040 R120
Expiry date:
31/10/2029
Model:
9TMDR-A5-15 - 1/2” BSP 9TMDR-A5-20 - 3/4” BSP 9TMDR-B5-15 - 15MM compression 9TMDR-B5-20 - 22MM compression 9TMDR-A4-15 - 1/2” BSP 9TMDR-A4-20 - 3/4” BSP 9TMDR-B4-15 - 15MM compression 9TMDR-B4-20 - 22MM compression 9TMDR-S1-15 - 15MM compression 9TMDR-S1-20 - 22MM compression
Product Images

Approval Holder:
VIR Valvoindustria Ing. Rizzio S.p.A.
Company Name
VIR Valvoindustria Ing. Rizzio S.p.A.
Address
Via Circonvallazione n. 10, 13018 Valduggia (VC)
Country
Italy

View All Listings by this Company

Print This Approval


#241002032

Range of concealed wall mounted thermostatic shower valves, (brass bodies – various finishes & strim sets). Incorporating either a ceramic disc headwork, two-way diverter or both (see models). The temperature is controlled independently via a thermostatic cartridge. The valves incorporate approved single check valve cartridges, however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 44.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002032
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Products are not supplied with shower hoses, handsets, riser rails or overhead shower outlets.
Size:
¾” BSP (F)
Marking:
SLION logo on faceplate
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
Dual control thermostatic valve without diverter SL0316(50), SL0316(51), SL0316(02), SL0316(01), SL0310(09), SL0310(11), SL0317(31), SL0316(00), SL0310(10), SL0310(08), SL0316(58), SL0316(59), SL0314(05) Dual control thermostatic valve with diverter SL0316(52), SL0317(25), SL0317(22), SL0317(30), SL0316(33), SL0311(09), SL0311(08), SL0316(23), SL0311(07), SL0311(06), SL0317(38), SL0317(37), SL0315(12 Three-control thermostatic valve with diverter SL0106(18), SL0105(22), SL0105(33), SL0105(07), SL0106(24), SL0106(26), SL0106(27), SL0105(05), SL0111(07), SL0106(28), SL0106(29), SL0106(30), SL0111(05) Three-control thermostatic valve without diverter SL0106(17), SL0106(16), SL0106(04), SL0106(02), SL0106(03), SL0106(37), SL0106(31), SL0106(05), SL0106(32), SL0106(33), SL0106(34), SL0106(35), SL0106(36)
Product Images

Manufacturer:
ZHEJIANG SLION FLUID CONTROL CO., LTD
Company Name
ZHEJIANG SLION FLUID CONTROL CO., LTD
Address
18 Jinbo Road, Bingang Industrial Zone Shamen Town, Yuhuan City, Zhejiang

View All Listings by this Company

Print This Approval


#241002035

Range of wall mounted concealed thermostatic blending valves with (brass bodies – various finishes), incorporating single lever or cross top operating members. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 60.0°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002035
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
For use with Hansgrohe iBox 01 180
Marking:
Axor on faceplate
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
Trim Kits: 10 710 xx0 (Cross top) 10 716 xx0 (Cross top) 16 810 xx0 (Cross Top) 16 823 xx0 (Single Lever) 34 715 xx0 (Single Lever) 38 375 xx0 (Single Lever) Basic Set: 30675100 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#241002036

Range of concealed thermostatic shower mixers (brass bodies - various finishes). The flow is controlled by a four-way manual diverter (3 on, 1 off positions) with single lever, cube type or dome type operating members. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button with single lever, cube type, dome type or cross top operating members. The inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002036
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
I-box rough in set 01700180 is not approved in its own right.
Size:
To be installed with rough set 01700180 ¾” BSP (F)
Marking:
AXOR on the escutcheon
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
Finish set. 10 720 xx0 10 726 xx0 11 733 xx0 12 716 xx0 16 820 xx0 16 821 xx0 34 725 xx0 38 720 xx0 39 720 xx0 39 725 xx0 Functional block 30105331 30675000 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#241002040

Range of wall mounted, thermostatic, shower mixers, (brass bodies - various finishes) incorporating a two-way ceramic disc diverter headwork to control the flow between two shower outlets with dome type operating members. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button with a dome type operating member. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002040
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The products are supplied with a shower hose, handset and overhead shower.
Size:
3/4" BSP (M) X 1/2" BSP (M) Offset Unions
Marking:
Hansgrohe on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
26 790 xx0 Hansgrohe Croma Select S 280 Showerpipe 26 794 xx0 Hansgrohe Croma Select S 280 Showerpipe EcoSmart 9l 26 890 xx0 Hansgrohe Croma Select S Showerpipe 280 1jet with thermostat and hand shower Raindance Select S 120 3jet 26 891 xx0 Hansgrohe Croma Select S Showerpipe 280 1jet EcoSmart 9 l/min with thermostat and hand shower Raindance Select S 120 3jet Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 286 of 390

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.