Directory Search Results

Print List

#2110374

Range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies comprising of a concealed brass body and a separate spout and trim set (chromium plated brass). Flow is controlled by a solenoid valve activated via an infra-red sensor. The inlets (within the) concealed body incorporate a plastic filter and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2110374
Note:
The 44665 concealed body is not approved in its own right.
Size:
½” BSP (F)
Marking:
Gessi on backplate
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2026
Model:
44665 (concealed body) Which must be used in conjunction with the following spout trim sets: 54014, 54114, 54214, 54314, 54414, 54015, 54115, 54215, 54315, 54415.
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#2111016

Wall mounted, single hole, single outlet (fixed) electronically controlled tap assembly (various finishes). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 40°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2111016
Size:
½” BSP (M)
Marking:
Zhong Rui Yi Sheng on wall plate
Installation Requirements:
R001 R009 R040 R570
Expiry date:
30/11/2026
Model:
WJ0513XX XX denotes the finish and can be replaced with any of the following: No Code = Chrome BBR = Brushed Brass BBL = Brushed Black MB = Matt Black SS = Stainless Steel
Product Images

Approval Holder:
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Company Name
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Address
Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave., JiaojiangDistrict, Taizhou City, Zhejiang Province, China.(318000)

View All Listings by this Company
Manufacturer:
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Company Name
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Address
Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave., JiaojiangDistrict, Taizhou City, Zhejiang Province, China.(318000)

View All Listings by this Company

Print This Approval


#2111017

Deck mounted, single hole, single outlet (fixed) electronically controlled tap assembly (various finishes). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Product supplied with metal backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 40°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2111017
Size:
½” BSP (M)
Marking:
Zhong Rui Yi Sheng on spout
Installation Requirements:
R001 R006 R009 R570
Expiry date:
30/11/2026
Model:
WJ0149XX XX denotes the finish and can be replaced with any of the following: No Code = Chrome BBR = Brushed Brass BBL = Brushed Black MB = Matt Black SS = Stainless Steel
Product Images

Approval Holder:
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Company Name
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Address
Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave., JiaojiangDistrict, Taizhou City, Zhejiang Province, China.(318000)

View All Listings by this Company
Manufacturer:
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Company Name
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Address
Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave., JiaojiangDistrict, Taizhou City, Zhejiang Province, China.(318000)

View All Listings by this Company

Print This Approval


#2111053

Deck mounted, single hole, single outlet (fixed) electronically controlled tap assembly (various finishes). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Product supplied with metal backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 40°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2111053
Size:
½” BSP (M)
Marking:
JTP on spout
Installation Requirements:
R001 R006 R009 R570
Expiry date:
30/11/2026
Model:
20149, 230149BBR, 270149BBL, 280149MB & IX0149 COMBINATION TAP ASSEMBLIES

Approval Holder:
Just Taps Plus UK Ltd
Company Name
Just Taps Plus UK Ltd
Address
Innovia House, Marish Wharf, St Mary's Rd, Langley
Postcode
SL3 6DA
Country
Berkshire
Phone
01895 44 22 11
General Email
info@jtpuk.co.uk

View All Listings by this Company

Print This Approval


#2111054

Wall mounted, single hole, single outlet (fixed) electronically controlled tap assembly (various finishes). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 40°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2111054
Size:
½” BSP (M)
Marking:
JTP on wall plate
Installation Requirements:
R001 R009 R040 R570
Expiry date:
30/11/2026
Model:
20513, 230513BBR, 270513BBL, 280513MB & IX0513 COMBINATION TAP ASSEMBLIES

Approval Holder:
Just Taps Plus UK Ltd
Company Name
Just Taps Plus UK Ltd
Address
Innovia House, Marish Wharf, St Mary's Rd, Langley
Postcode
SL3 6DA
Country
Berkshire
Phone
01895 44 22 11
General Email
info@jtpuk.co.uk

View All Listings by this Company

Print This Approval


#2105049

Side entry BS1212-4 (2016) compact type float operated valves for WC flushing cisterns. The inlet incorporates a plastic strainer and flow restrictor. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2105049
Note:
IRN R560 applies to the bottom entry version
Size:
½” BSP (M)
Marking:
Oceanwell, and BS1212-4 on float.
Installation Requirements:
R001 R008 R550
Expiry date:
31/05/2026
Model:
CI741

Approval Holder:
ARMERA LIMITED
Company Name
ARMERA LIMITED
Postcode
BA2 4QE

View All Listings by this Company
Manufacturer:
Oceanwell (Xiamen) Industrial Co.,Ltd
Company Name
Oceanwell (Xiamen) Industrial Co.,Ltd
Address
33 Shishan North Road, Dongfu Street, Dongfu Town, Haicang District Xiamen
Country
China
Phone
+86-592-5710506

View All Listings by this Company

Print This Approval


#2112330

Range of side entry BS1212-4 (2016) compact type float operated valves for WC flushing cisterns. The inlet incorporates a strainer. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2112330
Size:
3/8” (M)
Marking:
BS1212-4, Geberit on body.
Installation Requirements:
R001 R550
Expiry date:
31/12/2026
Model:
Geberit Type 380 AG Side Inlet Valves; 828.257.00.0 - PBT 828.260.00.0 - Brass 828.288.00.0 - Brass plus splash guard on outlet
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#2112322

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112322
Size:
½” BSP (M)
Marking:
Adhesive label below insert within cistern: OLI, actuation method, product date (DD/MM/YYYY) & OLI on flush plate 6L waterline on casing within cistern
Installation Requirements:
R001 R556 R571
Expiry date:
31/12/2026
Model:
Expert Plus Mec 1130 Expert Plus Mec 820 Expert Plus Pneu 1130 Expert Plus Pneu 820 Expert Plus Cable 1130 Expert Plus Cable 820
Product Images

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company

Print This Approval


#2112331

Range of concealed WC flushing cisterns incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112331
Size:
½” BSP (M)
Marking:
Adhesive below insert within cistern: OLI, actuation method, product date DD/MM/YY OLI etched on flush plate 6L waterline mould to casing withtin cistern
Installation Requirements:
R001 R556
Expiry date:
31/12/2026
Model:
OLI74 Plus Mec OLI74 Plus Pneu
Product Images

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company

Print This Approval


#2112346

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112346
Size:
½” BSP (M)
Marking:
Geberit label on cistern. Month/Year date clock on rear cistern Geberit on flush plate. 6L waterline mould within cistern
Installation Requirements:
R001 R571
Expiry date:
31/12/2026
Model:
Geberit Omega concealed cistern 109.041.00.1 109.051.00.1 109.061.00.1 Geberit Omega Duofix frame for wall hung WC, 111.004.00.1 111.031.00.1 111.061.00.1 Model added July August 2023: 111.004.00.3 Model added February 2025 111.004.00.4
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 285 of 1132

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.