Range of thermostatic circulation valves incorporating brass bodies and EDPM ‘O’-rings. Some models incorporate a gauge port. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

2111307

Size:

DN15 – ½” BSP (F) DN20 – ¾” BSP (F)

Marking:

IMI Hydronic Engineering logo (TA), PN16, DN, CR, Zero & flow arrow on body. IMI Hydronic Engineering logo (TA) and temperature on handwheel

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

With Thermometer 52 820-015 Ta-Therm-Zero DN15 +55° 52 820-020 Ta-Therm-Zero DN20 +55° Without Thermometer 52 820-115 Ta-Therm-Zero DN15 +55° 52 820-120 Ta-Therm-Zero DN20 +55° With measuring port 52 820-815 Ta-Therm-Zero DN15 +55° 52 820-820 Ta-Therm-Zero DN20 +55°

Product Images

Approval Holder:

IMI Hydronic Engineering

Company Name

IMI Hydronic Engineering

Address

Route de Crassier 19, CH-1262 Eysins, Switzerland

View All Listings by this Company

Silver and copper disinfection ion generator with a plastic body, incorporating a plastic flow switch. Maximum working pressure 9.0 bar. For cold water use only

Section:

2415 Water conditioners - Disinfectant ion generators

WRAS Approval Number:

2107067

Note:

This product actively uses copper for microorganism control purposes. These are subject to the EU Biocidal Products Regulation EU 528/2012. The EU Commissions’ decision of 13 February and 26 June 2014 granted the UK limited essential use derogations only for the control of legionella and limits the range of applications where this product can be used. Users should ensure these types of products are used in accordance with the authorisations issued by the HSE. Users should refer to the HSE website to keep themselves up to date on progress or for further information – www.hse.org.uk/ legionnaires/faqs.htm

Size:

22mm spigot inlet & 22mm push fit outlet.

Marking:

ProEconomy Limited and Ray on adhesive label on body

Installation Requirements:

R001 R150 R170 R290 R415

Expiry date:

31/07/2026

Model:

Ray unit

Product Images

Approval Holder:

ProEconomy Ltd.

Company Name

ProEconomy Ltd.

Address

23 Beaufort Court, Roebuck Way, Knowlhill, Milton Keynes

Postcode

MK5 8HL

View All Listings by this Company

Manufacturer:

ProEconomy Ltd.

Company Name

ProEconomy Ltd.

Address

23 Beaufort Court, Roebuck Way, Knowlhill, Milton Keynes

Postcode

MK5 8HL

View All Listings by this Company

Range of ion exchange water softeners (salt regenerated) for domestic use. Maximum working pressure 6.0 bar. Cold water use only.

Section:

2450 Water softeners

Size:

¾” BSP (M) inlet/outlet or 1” BSP (M) inlet/outlet

Marking:

Monarch Company details, model and other product info on adhesive label on rear of body. Model on front

Installation Requirements:

R001 R150 R170 R290 R415

Expiry date:

30/04/2026

Proviso:

Discharge to drain must be via a type `AA`, `AB` or `AD` air gap in accordance with EN1717.

Model:

Mini Aqua HE CS100HE PROSOFT100HE EVER 9 Midi HE CS150HE PROSOFT150HE EVER 12 Master HE CS200HE PROSOFT200HE EVER 18 Matrix HE CS300HE PROSOFT300HE EVER 30 PS12 HE PS15 HE GS4000 HE GS6000 HE LPS HE PROSOF 120 XE PROSOFT 120 XE PROSOF 160 XE PROSOFT 160 XE PROSOF 350 XE PROSOFT 350 XE SOF3000HE SOF6000HE

Approval Holder:

Monarch Water Ltd

Company Name

Monarch Water Ltd

Address

Fair Green Diss Norfolk

Postcode

IP22 4DG

Country

United Kingdom

Phone

01986 784759

General Email

kdelaney@monarchwater.co.uk

View All Listings by this Company

‘DURACON® M90-57 WK2001 & DURACON® M270-57 WK2001’. Grades 'M90-57 WK2001BG' & 'M270-57 WK2001BG' were added to the approval during September 2022. White coloured, injection moulded POM materials. For use with water up to 85°C.

Section:

5015 Acetal

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2201507

Expiry date:

31/01/2027

Approval Holder:

Polyplastics Co., Ltd.

Company Name

Polyplastics Co., Ltd.

Address

JR Shinagawa East Building, 18-1, Konan 2-Chome, Minato-Ku, Tokyo, 108-8280

Country

Japan

Phone

+81 3 6711 8605 Fax: +81 3 6711 8633

View All Listings by this Company

‘Inertol BS10’. Factory applied, black coloured bitumen coating. Apply as per manufacturer’s technical data sheet 'no. 786.3' dated 2013-V2'. Cure for 5 hours@23°C or 30 minutes@50°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval. Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials listed in this section are not approved for use for contact with water that is required to be wholesome on large water retaining structures such as lining of pipes, cisterns or water storage tanks.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

2202503

Expiry date:

28/02/2027

Approval Holder:

Mäder Group

Company Name

Mäder Group

Address

Burschgrundstrasse 10-12, 45894 Gelsenkirchen

Country

Germany

View All Listings by this Company