Range of pillar taps incorporating brass bodies (chrome plated), non-rising spindle headworks (models TPN0RBAS2 & TPN0RBATH2 or quarter turn ceramic disc headworks (all other models). The spout outlet incorporates a flow straightner. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

2104348

Size:

See model

Marking:

Lecico on rear of tap body

Installation Requirements:

R001 R005

Expiry date:

30/04/2026

Model:

TPNORBAS2 – NORTHBURY MOD BSN TAP PAIR ½” BSP (M) TPNORBATH2 - NORTHBURY MOD BATH PAIR BSP (M) TPSOUBAS2 - SOUTHBURY QT BASIN TAP PAIR ½” BSP (M) TPSOUBATH2 - SOUTHBURY QT BATH TAP PAIR ¾” BSP (M) TPASHBAS2 - ASHBY BASIN TAP PAIR ½” BSP (M) TPASBATH2 - ASHBY BATH TAP PAIR ¾” BSP (M)

Approval Holder:

LECICO Plc.

Company Name

LECICO Plc.

Address

2D VIKING INDUSTRIAL ESTATE HUDSON ROAD BEDFORD

Postcode

MK410QB

General Email

jrichards@lecico.co.uk

View All Listings by this Company

Self-closing tap (chromium plated brass) incorporating spring loaded headworks incorporating a dome type operating member, with a single lever operating member controlling the temperature. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate a check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

1820 Taps

Section Subtitle:

Self closing tap(s).

WRAS Approval Number:

2112035

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½" captive nut end connections.

Marking:

MCM and model number on body.

Installation Requirements:

R001 R006 R010

Expiry date:

31/12/2026

Model:

Code 9007 – self closing basin mixer

Approval Holder:

Rubinetterie MCM Intl. Srl.

Company Name

Rubinetterie MCM Intl. Srl.

Address

Via Dell'Acacia 54/56 I-28021 Borgomanero Italy

View All Listings by this Company

Manufacturer:

Rubinetterie MCM Intl. Srl.

Company Name

Rubinetterie MCM Intl. Srl.

Address

Via Dell'Acacia 54/56 I-28021 Borgomanero Italy

View All Listings by this Company

'APL' range of PVC lined flexible hose assemblies with various end connectors. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1840 Tubes

Section Subtitle:

Plastic, cold-water use.

WRAS Approval Number:

2112336

Note:

R008 applies to the hoses with plastic elbows.

Size:

see model

Marking:

Aquamatic Products Limited logo (APL), WRAS, year of manufacture (YYYY) on ferrule

Installation Requirements:

R001 R008

Expiry date:

31/12/2026

Model:

APL range available with the following end fittings: DN10: ¾” female straight x ¾” female elbow with retained washer DN12: 15mm compression x ½” female straight ¾” female straight with retained washer x ¾” female elbow with retained washer ¾” female straight x ¾” female elbow DN19: ¾” female x ¾” female elbow 22mm compression x ¾” female straight

Approval Holder:

Aquamatic Products Limited

Company Name

Aquamatic Products Limited

Address

Hydestile Stud Hambeldon Road Godalming Surrey

Postcode

GU8 4DE

Country

United Kingdom

Phone

01483 861559

General Email

steve@aquamatic.co.uk

View All Listings by this Company

Manufacturer:

Aquamatic Products Limited

Company Name

Aquamatic Products Limited

Address

Hydestile Stud Hambeldon Road Godalming Surrey

Postcode

GU8 4DE

Country

United Kingdom

Phone

01483 861559

General Email

steve@aquamatic.co.uk

View All Listings by this Company

Flexcore® Range of polyethylene lined flexible hoses incorporating (stainless steel or polyamide braiding and various end connections. Maximum operating temperature 65°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2112301

Size:

Bore Diamter DN8 to be supplied with the following end connectors: DN8 Quick Connector (available with single check valve cartridge variants) Female ½” Male M10 Plugin D9, D10

Marking:

Neoperl logo and date of manufacturer (YYMMDD) on crimp

Installation Requirements:

R001 R008

Expiry date:

31/12/2026

Model:

39.96CD.EFG.HI OH Flexcore® Part Code nomenclature constructed in the following manner: - 39.ABCD.EFG.HI A = Hose Type B = Hose Material CD.EFG = Manufacturing sequential number HI = Packaging information

Approval Holder:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim

Postcode

D-79379

Country

Germany

Phone

+49 7631 188 374

General Email

DE.Approvals@neoperl.com

View All Listings by this Company

Manufacturer:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim

Postcode

D-79379

Country

Germany

Phone

+49 7631 188 374

General Email

DE.Approvals@neoperl.com

View All Listings by this Company

Range of multi-layered flexible hoses (TPE inner liner/PVC middle/PVC outer with polyester braiding in-between) and stainless-steel braided EPDM flexible hoses. The hoses are supplied with a variety of end connections incorporating brass barbed hose inserts or white plastic barbed hose inserts. The hoses may also incorporate a servicing valve (see model). The push fit connectors are to be used with copper pipe (Manufactured to EN1057), PB pipe (Manufactured to BS EN21003) & PE-x pipe (manufactured to BS EN7291-3). Products shown with a “P” suffix (eg. WFLX15P, FLX43P) are a prepacked variant of the original product eg. WFLX15, FLX43. Products shown with a “SB” suffix (eg. FLX15P-SB, WFLX28-SB) are a reduced box quantity of an existing product. Maximum working pressure and operating temperature: 12.0 bar @ 20°C and 6.0 bar @ 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2110096

Size:

See model.

Marking:

John Guest logo (brand of Reliance Worldwide Corporation (UK) Ltd.), WRAS, date of manufacture (YYWW), maximum temperature and pressure on hose. John Guest logo (brand of Reliance Worldwide Corporation (UK) Ltd.), size and maximum temperature on connector. Markings added December 2022: WRAS & DoM (YYYY) on ferrule (braided hoses only) or WRAS, DoM (YYYY) & other technical info on hose body (non-braided hoses only). JG (John guest Logo), Size and Max Temperature on Pushfit Connector (When applicable). JG (John guest Logo) and Size on Service Valve (when applicable).

Installation Requirements:

R001 R008

Expiry date:

31/10/2026

Model:

Speedfit x Union Nut 300mm hose: WFLX15: 15mm push-fit x ½” BSP captive nut WFLX16: 15mm push-fit x ¾” BSP captive nut WFLX22: 22mm push-fit x ¾” BSP captive nut Speedfit x Union Nut: 500mm hose: WFLX18: 15mm push-fit x ½” BSP captive nut WFLX20: 15mm push-fit x ¾” BSP captive nut WFLX19: 22mm push-fit x ¾” BSP captive nut Speedfit x Union Nut: 1000mm hose: WFLX40: 15mm push-fit x ½” BSP captive nut Speedfit x Union Nut with Service Valve: 300mm hose: WFLX37-H: 15mm push-fit x ½” BSP captive nut service valve hose WFLX39-H: 22mm push-fit x ¾” BSP captive nut service valve Hose Speedfit x Speedfit: 300mm hose: WFLX33: 10mm push-fit x 15mm push-fit WFLX17: 15mm push-fit x 15mm push-fit Speedfit x Speedfit: 500mm hose: WFLX21: 15mm push-fit x 15mm push-fit Elbow Pattern: 300mm hose: WFLX36: 15mm push-fit x ½” BSP captive nut Elbow Speedfit x Hand Tighten Nut: 300mm hose: PFLX15: 15mm push-fit x ½” BSP captive nut PFLX16: 15mm push-fit x ¾” BSP captive nut PFLX22: 22mm push-fit x ¾” BSP captive nut Speedfit x Hand Tighten Nut: 500mm hose: PFLX18: 15mm push-fit x ½” BSP captive nut PFLX19: 22mm push-fit x ¾” BSP captive nut Speedfit x Hand Tighten Union Nut with Service Valve: 300mm hose: PFLX37: 15mm push-fit x ½” BSP captive nut service valve hose PFLX37-H: 15mm push-fit x ½” BSP captive nut service valve with handle hose Speedfit x Hand Tighten Union Nut with Service Valve: 500mm hose: PFLX78: 15mm push-fit x ½” BSP captive nut service valve hose Extra Flexi Speedfit x Hand tighten Nut: 300mm hose: PFLX88: 15mm push-fit x ½” BSP captive nut Speedfit with Plastic Valve with Handle x Bulkhead connection: 429mm hose: NCWFLX54-H: 15mm push-fit service valve x ½” BSP bulkhead Speedfit with Elbow Plastic Valve with Handle x Bulkhead connection: 530mm hose: NCWFLX58-H: 15mm push-fit x ½” BSP Elbow Service Valved hose Speedfit with Plastic Valve with Handle x Hand Tighten Union Nut: 342mm hose: NCWFLX37-H: 15mm Plastic Valved Hose Connector x ½” Flexi Hose Models added December 2022. Speedfit x Union Nut: 300mm hose: WFLX15-SB: 15mm push-fit x ½” BSP captive nut, 300mm hose. WFLX16-SB: 15mm push-fit x ¾” BSP captive nut, 300mm hose. WFLX22-SB: 22mm push-fit x ¾” BSP captive nut, 300mm hose. For Monobloc Mixers WFLX28: 15mm push-fit x M10 monobloc hose kit, 300mm hose. WFLX29: 15mm push-fit x M12 monobloc hose kit, 300mm hose. Speedfit with Shut Off Valve and Hand Tighten Union Nut x Bulkhead, Short. NCWFLX98-H: 1/2” bsp BULKHEAD x 1/2 bsp Shut Off Valve Flexi Hose. (Short). SPEEDFIT X UNION NUT: 100mm hose FLX43: 15mm pushfit x ½” captive nut - 150mm hose SPEEDFIT X UNION NUT: 300mm hose FLX35, FLX35P: 15mm pushfit x ⅜” captive nut - 300mm hose FLX15, FLX15P, FLX15P-SB: 15mm pushfit x ½” captive nut - 300mm hose FLX16, FLX16P, FLX16P-SB: 15mm pushfit x ¾” captive nut - 300mm hose FLX22, FLX22P, FLX22P-SB: 22mm pushfit x ¾” captive nut - 300mm hose SPEEDFIT X UNION NUT: 500mm hose FLX18, FLX18P, FLX18P-SB: 15mm pushfit x ½” captive nut - 500mm hose FLX20, FLX20P, FLX20P-SB: 15mm pushfit x ¾” captive nut - 500mm hose FLX19, FLX19P, FLX19P-SB: 22mm pushfit x ¾” captive nut - 500mm hose. FLX23, FLX23P: 22mm pushfit x ¾” captive nut - 500mm hose SPEEDFIT X UNION NUT: 1000mm hose FLX40, FLX40P: 15mm pushfit x ½” captive nut - 1000mm hose FLX42, FLX42P: 15mm pushfit x ¾” captive nut - 1000mm hose FLX41, FLX41P: 22mm pushfit x ¾” captive nut - 1000mm hose SPEEDFIT X UNION NUT WITH SERVICE VALVE FLX37, FLX37P, FLX37P-SB: 15mm pushfit x ½” captive nut - 300mm hose – Service Valve, FLX39, FLX39P: 22mm pushfit x ¾” captive nut - 300mm hose – Service Valve, FLX37-H: 15mm pushfit x ½” captive nut - 300mm hose – Service Valve and handle FLX39-H: 22mm pushfit x ¾” captive nut - 300mm hose – Service Valve and handle, SPEEDFIT X UNION NUT WITH SERVICE VALVE W/ METAL CONNECTIONS 300mm hose FLX24, FLX24P, FLX24P-SB: 15mm pushfit x ½” captive nut - 300mm – Service Valve FLX25, FLX25P: 22mm pushfit x ¾” captive nut - 300mm – Service Valve.   SPEEDFIT X UNION NUT WITH SERVICE VALVE W/ METAL CONNECTIONS 500mm hose FLX31, FLX31P: 15mm pushfit x ½” captive nut - 500mm – Service Valve, FLX38, FLX38P: 15mm pushfit x ¾” captive nut - 500mm – Service Valve, SPEEDFIT X SPEEDFIT- 300mm hose FLX33P: 10mm pushfit x 15mm pushfit - 300mm hose FLX17, FLX17P, FLX17P-SB: 15mm pushfit x 15mm pushfit - 300mm hose FLX26, FLX26P: 22mm pushfit - 22mm pushfit - 300mm hose SPEEDFIT X SPEEDFIT- 500mm hose FLX21, FLX21P FLX21P-SB: 15mm pushfit x 15mm pushfit - 500mm hose FLX27, FLX27P: 22mm pushfit - 22mm pushfit - 500mm hose SPEEDFIT X SPEEDFIT- 1000mm hose FLX47: 15mm pushfit x 15mm pushfit - 1000mm hose SPEEDFIT X SPEEDFIT WITH SERVICE VALVE – 300mm hose FLX44, FLX44P: 15mm pushfit x 15mm pushfit - 300mm hose – Service Valve SPEEDFIT X SPEEDFIT WITH SERVICE VALVE – 500mm hose FLX45, FLX45P: 15mm pushfit x15mm pushfit - 500mm hose – Service Valve SPEEDFIT X MALE FLX49: 15mm pushfit x ⅜” captive nut - 300mm hose SPEEDFIT X PLAIN STEM FLX53: 15mm pushfit x 15mm tube stem - 300mm hose ELBOW PATTERN FLX36, FLX36P, FLX36P-SB: 15mm pushfit x ½” captive nut (elbow) - 300mm hose, FOR MONOBLOC MIXERS-300mm hose FLX48: 12mm pushfit x M10 male thread - Monobloc Kit -300mm hose FLX28: 15mm pushfit x M10 male thread - Monobloc Kit -300mm hose FLX29, FLX29-SB: 15mm pushfit x M12 male thread - Monobloc Kit-300mm hose Pre-packaged models have a ‘P’ suffix, e.g. WFLX15P.

Approval Holder:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company