Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #260304003

Range of ultrasonic water meters incorporating a brass or plastic (-C suffix models only) body. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: KDM Series: ¾" - 2½ BSP (M) (DN15 to DN50). VDE Series: ¾" - 1" BSP (M) (DN15 to DN20).
Marking:: CEM Water Meters on cap. CEM Water Meters, pressure, serial code, model code and other technical info on dial body. Flow arrow on body.
Installation Requirements:: R001
Expiry date:: 31/03/2031
Model:: KDM Series, Multijet, Dry Type KDM1, KDM2, KDM3, KDM4, KDM5, KDM6, KDM7, KDM8, KDM9, KDM10, KDM11 VDE Series Volumetric, Dry Type, Brass Body VD1E, VD2E, VD3E, VD4E, VD5E, VD7E Volumetric, Dry Type, Composite Body VD1E-C, VD2E-C, VD3E-C, VD4E-C, VD5E-C, VD7E-C

Approval Holder:: Yavuz Metal Sanayi Ve Ticaret A.Ş.

Company Name
Yavuz Metal Sanayi Ve Ticaret A.Ş.
Address
Organize Sanayi Bolgesi 2 Cadde No 4 Arsin Turkey

View All Listings by this Company

WRAS Approval Number: #260304004

Range of ultrasonic water meters incorporating a stainless steel body, temperature sensor, pressure sensor and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: Sanchuan Wisdom Technology Co., Ltd. logo on cover. Flow arrow and size on side cover. Model No., address, pressure, temperature, date of manufacture (MM/YY) and product information on meter face.
Installation Requirements:: R001
Expiry date:: 31/03/2031
Model:: U550-15K: (DN15) ½” BSP (M), U550-20K: (DN20) ¾” BSP (M), U550-25K: (DN25) 1” BSP (M).

Approval Holder:: Sanchuan Wisdom Technology Co., Ltd.

Company Name
Sanchuan Wisdom Technology Co., Ltd.
Address
Sanchuan Hydraulic Industrial Park, Longgang Section, Hi-Tech Development Zone, Yingtan, Jiangxi, P.R.China

View All Listings by this Company

WRAS Approval Number: #260302023

Range of tapping tees with gunmetal bodies and plastic fitting, for use with SDR11 & SDR17 Polyethylene barrier pipes (manufactured to BS8588). For pipe diameters between 63mm & 90mm, the adaptor plate must be used. When used with SDR11 pipes the maximum working pressure is 16.0 bar. When used with SDR17 pipes the maximum working pressure is 10.0 bar. Cold water use, for below ground only.

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 260302023
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
Size:: Please refer to model.
Marking:: Radius systems on stem cap. Radius systems and size on metal strap.
Installation Requirements:: R001
Expiry date:: 31/03/2031
Model:: XR5125 Easi Fit Puriton Tapping Tee: DN63 - DN180 x 25mm Compression. XR5130 Easi Fit Puriton Tapping Tee: DN63 - DN180 x 32mm Compression.

Approval Holder:: Radius Systems Limited

Company Name
Radius Systems Limited
Address
Radius House, Berristow Lane, South Normanton, Alfreton, Derbyshire
Postcode
DE55 2JJ
Country
United Kingdom
Phone
01773582303

View All Listings by this Company

WRAS Approval Number: #260302709

Range of cast iron (blue epoxy coated) (G versions only) or stainless steel (all other versions - F, N, R, T) vertical multistage pumps with stainless steel impellers, shaft and outer sleeve. Maximum working pressures: 16 bar, 25 bar and 40 bar. Oval flanges - Body type ‘T’ (1SV-3SV, 5SV, 10SV, 15SV-22SV) - 16 bar. Round flanges - Body type ‘R’ (1SV-3SV, 5SV, 10SV, 15SV-22SV) - 25 bar. Round flanges - Body type ‘F’ (1SV-3SV) - 25 bar. Round flanges - Body type ‘N’ (10SV) - 25 bar. Round flanges - Body type ‘N’ (66SV-92SV) - 16 bar. Round flanges - Body type ‘G’ (33SV, 46SV) - 40 bar. Round flanges - Body type ‘G’ (33SV, 46SV, 66SV-92SV, 125SV) - 16 bar. Round flanges - Body type ‘G’ (125SV) - 25 bar. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 260302709
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Flanged inlet and outlet: (T versions have 2 bolt oval flanges). (F, G, N, R versions have round flanges). 1SV-3SV: DN25. 5SV: DN32. 10SV: DN40. 15-22SV: DN50. 33SV: DN65. 46SV: DN80. 66SV-92SV: DN100. 125SV: DN125.
Marking:: Lowara logo, Xylem, pressure and technical data on data plate on body. Lowara and WRAS on adhesive label on body DN80 46SV_10G_055 Lowara logo, Xylem, pressure and technical data on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 31/03/2031
Model:: 1SV, 3SV, 5SV, 10SV, 15SV, 22SV, 33SV, 46SV, 66SV, 92SV & 125SV series pumps. Example code: 10SV_05F_022_ _T/D Where: • 10 = flow rate in m³/h (1, 3, 5, 10, 15, 22, 33, 46, 66, 92, 125). • SV = series name. • _ = Motor operation. blank = standard version, H = equipped with Hydrovar, E = e-SM (1SV-22SV models only) or a single letter denoting the type of the variable speed drive model used. • 05 = 2 digits for number of impellers [05 = 5 impellers], can also be represented as: X/1A or X/2A, where X = number of impellers: 1-13, /1 or /2 = 1 or 2 impellers with outer diameter reduced. A = reduction type. • F = body type: F, T, R, G or N. 1SV-25SV models F - AISI 304, round flanges, T - AISI 304, oval flanges, R - AISI 304, discharge port above suction, round flanges, N - AISI 316, round flanges. 33-125SV models G - AISI 304/Cast Iron, round flanges. N - AISI 316, round flanges, • _ = blank (null) to denote standard version. • 022 = Rated motor power - 3 digits (kW x 10). • _ = blank (null) to denote 2-pole, 4 = 4 pole. • _ = blank (null) to denote 50Hz, 6 = 60Hz, 0 = e-SM (1SV-22SV models only). • T = Three-phase or M to denote single-phase or Null = standard version. • /D = relates to supply voltage and can also be blank, /2, /4 or /4/2.

Approval Holder:: Xylem Service Italia S.r.l

Company Name
Xylem Service Italia S.r.l
Address
Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza
Country
Italy
Phone
0039 0444 707111

View All Listings by this Company

WRAS Approval Number: #260304701

Range of electronic booster pumps with variable speed, incorporating stainless-steel bodies, impellers and shaft, EPDM gaskets and seals and an expansion vessel on the outlet. The pumps incorporate a drain port. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 260304701
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: The discharge from the drain port must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:: PBI-L2 prefix models: 1” BSP (F) x 1” BSP (F), PBI-L4 prefix models: 1¼” BSP (F) x 1” BSP (F), PBI-L8 prefix models: 1½” BSP (F) x 1¼” BSP (F).
Marking:: Wilo, model no., date of manufacture (YYWW) and other technical information on data label on body. Wilo on control box.
Installation Requirements:: R001 R415
Expiry date:: 31/03/2031
Model:: PBI-L series pumps: PBI-L203MA/P, PBI-L204MA/P, PBI-L205MA/P, PBI-L402MA/P, PBI-L403MA/P, PBI-L404MA/P, PBI-L405MA/P, PBI-L802MA/P, PBI-L803MA/P, PBI-L203EA/P, PBI-L204EA/P, PBI-L205EA/P, PBI-L402EA/P, PBI-L403EA/P, PBI-L404EA/P, PBI-L405EA/P, PBI-L802EA/P, PBI-L803EA/P, PBI-L203MA/P/S, PBI-L204MA/P/S, PBI-L205MA/P/S, PBI-L402MA/P/S, PBI-L403MA/P/S, PBI-L404MA/P/S, PBI-L405MA/P/S, PBI-L802MA/P/S, PBI-L803MA/P/S, PBI-L203EA/P/S, PBI-L204EA/P/S, PBI-L205EA/P/S, PBI-L402EA/P/S, PBI-L403EA/P/S, PBI-L404EA/P/S, PBI-L405EA/P/S, PBI-L802EA/P/S, PBI-L803EA/P/S. Where: PBI-L = series name (Electronic boosting pump variable speed pump (Inverter Pump)) 2, 4 or 8 = Rated flow capacity in m³/h. 2, 3, 4 or 5 = Number of Impellers. M or E = Power. M: 60Hz 220V/230V 1phase, E: 50Hz 220V/230V 1phase. [blank] or A = Mode. [blank]: Non-automatic models, A: Models with pressure sensor and inverter that are responsible for automatic mode, allowing the pump to operate at the corresponding RPM to maintain the set operating pressure. P = Product Category. P: Complete product. [blank] or S = Accessories. [blank]: No accessories, S: Sun cover.

Approval Holder:: WILO Pumps Ltd.

Company Name
WILO Pumps Ltd.
Address
46, Mieumsandan 1-ro, Gangseo-gu, Busan, Republic of Korea, 46730

View All Listings by this Company
Manufacturer:: WILO Pumps Ltd.

Company Name
WILO Pumps Ltd.
Address
46, Mieumsandan 1-ro, Gangseo-gu, Busan, Republic of Korea, 46730

View All Listings by this Company