‘CD3 Series’ chlorine dioxide dosing system incorporating a single check valve positioned at the point of injection. Maximum working pressure 6.0 bar. Cold water use only.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

2110361

Size:

6mm pipe

Marking:

Culligan, CD3 series Chlorine Dioxide Generator & other information on body.

Installation Requirements:

R001 R120 R160 R170 R290 R415 R575

Expiry date:

31/10/2026

Model:

CD3 – CL02 – 80G/HR. CD3 – CL02 – 160G/HR. CD3 – CL02 – 240G/HR. CD3 – CL02 – 400G/HR.

Product Images

Approval Holder:

Culligan (UK) Ltd.

Company Name

Culligan (UK) Ltd.

Address

Halifax House Coronation Road High Wycombe

Postcode

HP12 3SE

Country

United Kingdom

Phone

01494 441286

General Email

commercial@culligan.co.uk

View All Listings by this Company

Range of expansion vessels with EPDM membrane and stainless steel flange connections. Models VB8, VB12, VB18 & VB24 have a maximum working pressure of 16.0 bar. All other models have a maximum working pressure of 10.0 bar. Maximum operating temperature 100°C.

Section:

1000 Expansion Vessels

WRAS Approval Number:

2110323

Note:

Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum

Size:

½” BSP (M), ¾” BSP (M) & 1” BSP (M)

Marking:

Aquasystems, Zilio Industries SpA, serial number & technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

AR5 AR8 AR12 AR18 VA2 VA5 VA8 VA12 VA18 ARB8 ARB12 ARB18 ARB24 VA24 VAS24 AR24 VAO18 VAO20 VAO24 VB8 VB12 VB18 VB24

Product Images

Approval Holder:

Zilio Industries SPA

Company Name

Zilio Industries SPA

Address

Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)

Country

Italy

Phone

[+39] 049 59 57 552

General Email

info@zilioindustries.com

View All Listings by this Company

Range of filling loop assemblies, comprising of a stainless steel braided EPDM lined hose, isolation valve with a DZR brass body and ball and an isolation valve with a DZR brass body and ball incorporating two check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3). The F1400120012211 model has an isolation valve incorporating two check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3) at each end of the filling loop. All items except the hoses are nickel plated. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1015 Filling Loop

Size:

15mm compression

Marking:

Hoses: JUSTLINK®, WRAS and production year (YYYY) on the sleeve. Isolation valves: Flow arrow, size and JUSTLINK® on body. Combined isolation valve and double check valve: F1400120012187, F1400120012211 & F1400120012186 models: Flow arrow, CR and JUSTLINK® on body. F1400120012117 model: Flow arrow, size, CR and JUSTLINK® on body. F1400380038134 model: Flow arrow, CR, JUSTLINK® and Yuhuan Jianglin Plumbing Hose & Parts Co., Ltd on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

F1400120012187, F1400120012211, F1400120012117, F1400120012186, F1400380038134. MODEL ADD IN APRIL 2022: F1400120012214

Approval Holder:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road Yuhuan Economic Development Zone Yuhuan Zhejiang

Postcode

317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company

Manufacturer:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road Yuhuan Economic Development Zone Yuhuan Zhejiang

Postcode

317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company

Carbon block filter cartridge with plastic body. The cartridge may be installed with a manifold (filter head) for use with PE tubing manufactured to BS 1972. Maximum working pressure 8.6 bar. Cold water use only

Section:

1055 Filter Cartridges

Size:

Filter: 11mm spigot. Manifold: ¼” pushfit.

Marking:

Good home (Tradename of Kingfisher), model and technical info on label on body (Filter) Kingfisher on body (Manifold) model and technical information on label on body

Installation Requirements:

R001 R120 R150 R170 R290

Expiry date:

30/11/2026

Model:

FC01 FILTER CARTRIDGES & SINGLE STAGE MANIFOLD

Product Images

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

‘Comisa’ range of brass bodied press-fit and threaded fittings for use with `Comisa’ (PE-RT/AL/PE-LMD) multi-layer pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2111309

Size:

See model

Marking:

Fittings: Comisa logo, DVGW, size, made in Italy on body. Pipe: Comisa, size, pressure, date of manufacture (DD.MM.YY) (HH.MM) and other technical information on body. Date Code: 111=first four months 11=second four months 1=last four months J=2020 K=2021

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

Press fittings: Straight coupler: 87.10.160: MU0870000160 16 x 2, 87.10.200: MU0870000200 20 x 2, 87.10.260: MU0870000260 26 x 3. Reducing coupling double: 87.11.201: MU0870R20160 20 x 2 - 16 x 2, 87.11.260: MU0870R26160 26 x 3 - 16 x 2, 87.11.263: MU0870R26200 26 x 3 - 20 x 2. Male Coupling: 87.12.150: MU0871003160 16 x 2 - ⅜”, 87.12.160 : MU0871005160 16 x 2 - ½”, 87.12.164: MU0871007160 16 x 2 - ¾”, 87.12.200: MU0871005200 20 x 2 - ½”, 87.12.201: MU0871007200 20 x 2 - ¾”, 87.12.255: MU0871005260 26 x 3 - ½”, 87.12.260: MU0871007260 26 x 3 - ¾”, 87.12.261: MU0871010260 26 x 3 - 1”. Female Coupling: 87.13.160 : MU0880005160 16 x 2 - ½”, 87.13.164: MU0880007160 16 x 2 - ¾”, 87.13.200: MU0880005200 20 x 2 - ½”, 87.13.201: MU0880007200 20 x 2 - ¾”, 87.13.255: MU0880005260 26 x 3 - ½”, 87.13.260: MU0880007260 26 x 3 - ¾”, 87.13.261: MU0880010260 26 x 3 - 1”. Elbow 90°: 87.14.160: MU0860000160 16 x 2, 87.14.200: MU0860000200 20 x 2, 87.14.260: MU0860000260 26 x 3. Male Elbow 90°: 87.16.160: MU0861005160 16 x 2 - ½”, 87.16.164: MU0861007160 16 x 2 - ¾”, : MU0861003160 16 x ⅜”, 87.16.200: MU0861005200 20 x 2 - ½”, 87.16.201: MU0861007200 20 x 2 - ¾”, 87.16.260: MU0861007260 26 x 3 - ¾”, 87.16.265: MU0861010260 26 x 3 - 1”. Female Elbow 90°: 87.17.159: MU08620H5160 - 16 x 2 - ½” 87.17.160: MU0862005160 - 16 x 2 - ½” 87.17.164: MU0862007160 - 16 x 2 - ¾” 87.17.200: MU0862005200 - 20 x 2 - ½” 87.17.201: MU0862007200 - 20 x 2 - ¾” 87.17.260: MU0862007260 - 26 x 3 - ¾” 87.17.265: MU0862010260 - 26 x 3 - 1” Tee: 87.18.160: MU0850000160 - 16 x 2 87.18.200: MU0850000200 - 20 x 2 87.18.260: MU0850000260 - 26 x 3 Tee reduced middle section: 87.19.201: MU085300BAB0 - 20 x 2 - 16 x 2 - 20 x 2 87.19.261: MU085300DAD0 - 26 x 3 - 16 x 2 - 26 x 3 87.19.263: MU085300DBD0 - 26 x 3 - 20 x 2 - 26 x 3 Reducing Tee: 87.20.202: MU085300BAA0 - 20 x 2 - 16 x 2 - 16 x 2 87.20.206: MU085300BBA0 - 20 x 2 - 20 x 2 - 16 x 2 87.20.260: MU085300DAB0 - 26 x 3 - 16 x 2 - 20 x 2 87.20.264: MU085300DBA0 - 26 x 3 - 20 x 2 - 16 x 2 87.20.265: MU085300DBB0 - 26 x 3 - 20 x 2 - 20 x 2 87.20.269: MU085300DDA0 - 26 x 3 - 26 x 3 - 16 x 2 87.20.270: MU085300DDB0 - 26 x 3 - 26 x 3 - 20 x 2 Tee enlarged middle section: 87.21.161: MU085300ABA0 - 16 x 2 - 20 x 2 - 16 x 2 87.21.201: MU085300BDB0 - 20 x 2 - 26 x 3 - 20 x 2 87.21.260: MU085300DED0 - 26 x 3 - 32 x 3 - 26 x 3 Male Tee: 87.22.160: MU0851005160 - 16 x 2 - ½” - 16 x 2 87.22.200: MU0851005200 - 20 x 2 - ½” - 20 x 2 87.22.201: MU0851007200 - 20 x 2 - ¾” - 20 x 2 87.22.260: MU0851005260 - 26 x 3 - ½” - 26 x 3 87.22.261: MU0851007260 - 26 x 3 - ¾” - 26 x 3 87.22.262: MU0851010260 - 26 x 3 - 1” - 26 x 3 Female Tee: 87.23.160: MU0852005160 - 16 x 2 - ½” - 16 x 2 87.23.200: MU0852005200 - 20 x 2 - ½” - 20 x 2 87.23.201: MU0852007200 - 20 x 2 - ¾” - 20 x 2 87.23.260: MU0852005260 - 26 x 3 - ½” - 26 x 3 87.23.261: MU0852526200 - 26 x 3 - ½” - 20 x 2 87.23.263: MU0852007260 - 26 x 3 - ¾” - 26 x 3 Wallplate elbow-short 90°: 87.24.145: MU0863003160 - 16 x 2 - ⅜” h. 39mm 87.24.160: MU0863005160 - 16 x 2 - ½” h. 39mm 87.24.161: MU08630H5160 - 16 x 2 - ½” h. 52mm 87.24.200: MU0863005200 - 20 x 2 - ½” h. 52mm 87.24.201: MU0863007200 - 20 x 2 - ¾” h. 52 mm 87.24.260: MU0863007260 - 26 x 3 - ¾” h. 52mm Wallplate elbow-double short 90°: 87.25.160: MU0864005160 - 16 x 2 - ½” - 16 x 2 h. 52mm 87.25.200: MU0864005200 - 20 x 2 - ½” - 20 x 2 h. 52mm Wallplate elbow-long 90°: 87.26.160: MU0863L05160 - 16 x 2 ½” h. 78mm 87.26.200: MU0863L05200 - 20 x 2 ½” h. 78mm Wallplate elbow for series connections: 87.26.205: MU0865005160 - 16 x 2 - ½” F - 16 x 2 - h 52 mm 87.26.210: MU0865005200 - 20 x 2 - ½” F - 20 x 2 - h 52 mm Wallplate elbow U-shaped 180°: 87.27.216: MU0884005160 - 16 x 2 - ½” 87.27.220: MU0884005200 - 20 x 2 - ½” Wallplate elbow U-shaped: 87.27.160: MU0887005160 - 16 x 2 - ½” - 16 x 2 87.27.200: MU0887005200 - 20 x 2 - ½” - 20 x 2 Cistern connector ¾” M x ½” F: 87.33.105: MU0867005160 - 16 x 2 - h 78 mm 87.33.115: MU0867005200 - 20 x 2 - h 78 mm WC Cistern Elbow: 87.28.160: MU0856005160 - 16 x 2 - ½” 87.28.200: MU0856005200 - 20 x 2 - ½” WC Cistern T-Piece: 87.29.160: MU0857005160 - 16 x 2 - ½” - 16 x 2 87.29.200: MU0857005200 - 20 x 2 - ½” - 20 x 2 Elbow 45°: 87.30.260: MU0866000260 - 26 x 3 Elbow 45°, Stop end: 87.31.160: MU0881000160 - 16 x 2 87.31.200: MU0881000200 - 20 x 2 87.31.260: MU0881000260 - 26 x 3 Male angle screw connector 90°: 87.34.160: MU0868005160 - 16 x 2 87.34.200: MU0868005200 - 20 x 2 - ½” 87.34.201: MU0868007200 - 20 x 2 - ¾” Female angle screw connector 90°: 87.35.160: MU0869005160 - 16 x 2 - ½” 87.35.200: MU0869005200 - 20 x 2 - ½” 87.35.201: MU0869007200 - 20 x 2 - ¾” Female screw fitting, flat seal: 87.36.160: MU0883005160 - 16 x 2 - ½” 87.36.161: MU0883007160 - 16 x 2 - ¾” 87.36.200: MU0883005200 - 20 x 2 - ½” 87.36.201: MU0883007200 - 20 x 2 - ¾” 87.36.260: MU0883007260 - 26 x 3 - ¾” 87.36.261: MU0883010260 - 26 x 3 - 1” Male screw fitting, tapered: 87.37.160: MU0873005160 - 16 x 2 - ½” 87.37.161: MU0873007160 - 16 x 2 - ¾” 87.37.200: MU0873005200 - 20 x 2 - ½” 87.37.201: MU0873007200 - 20 x 2 - ¾” 87.37.260: MU0873007260 - 26 x 3 - ¾” 87.37.261: MU0873010260 - 26 x 3 - 1” Connecting screw fitting with Euro cone raw: 87.39.160: MU087500716L 16 x 2 - ¾” 87.39.200: MU087500720L 20 x 2 - ¾” 87.39.260: MU087501026L 26 x 3 - 1” Screw connector, flat seal: 87.42.140: MU087600316L 16 x 2 - ⅜” 87.42.150: MU087600516L 16 x 2 - ½” 87.42.160: MU087600716L 16 x 2 - ¾” 87.42.170: MU087600520L 20 x 2 - ½” 87.42.200: MU087600720L 20 x 2 - ¾” 87.42.260: MU087601026L 26 x 3 - 1” : MU087600726L 26 x ¾" Tee By-pass: 87.49.010: MU0888000160 - 16 x 16 x 16 87.49.015: MU088800BAA0 - 20 x 16 x 16 87.49.020: MU088800BAB0 - 20 x 16 x 20 87.49.025: MU0888000200 - 20 x 20 x 20 NP Nipples press + insert: 87.47.055: MU0886016120 - 16x2 - 12 mm Nipples press + insert: 87.47.060: MU0886016150 - 16 x 2 - 15 mm 87.47.070: MU0886020220 - 20 x 2 - 22 mm Elbow press x compression: 87.47.110: MU0858016100 - 16 x 2 -10 mm 87.47.115: MU0858016150 - 16 x 2 -15 mm Quick press connection (2 pieces): 87.50.100 VA0844000160 - 16 x 2 87.50.105 VA0844000200 - 20 x 2 Disaligned tee fittings, on mounting plate, for Multiple conn: 87.54.034: MU0830005160 - 16 x 2 - ½” F - 16 x 2 87.54.035: MU0830005200 - 20 x 2 - ½” F - 20 x 2 Disaligned end fittings, on mounting plate: 87.54.039: MU0831005160 - 16 x 2 - ½” F - 16 x 2 87.54.040: MU0831005200 - 20 x 2 - ½” F - 20 x 2 disaligned fittings: 87.54.032: MU0891005160 - 16 x 2 - ½” F 16 x 2 87.54.033: MU0891005200 - 20 x 2 - ½” F 20 x 2 Wallplate elbow assembled in set: 87.54.005: MU0832005160 - 16 x 2 - ½” 87.54.019: MU0832005200 - 20 x 2 - ½” 87.54.020: MU0832007200 - 20 x 2 - ¾” Wallplate elbow 16 x 2 - ½” h. 52 mm with soundproof elements assembled in set: 87.54.030: MU0833005160 - 16 x 2 ½” Sanitary mounting plate assembled with 2 wallplate elbows, distance 76 mm: 87.54.060: MU0834005160 ½” - 16 x 2 87.54.061: MU0834005200 ½” - 20 x 2 Sanitary mounting plate assembled with 2 wallplate elbows, distance152 mm: 87.54.065: MU0835005160 ½” - 16 x 2 87.54.066: MU0835005200 ½” - 20 x 2 Press elbow swivel nut ½x16: MU0892005160 - 16x½" Press elbow swivel nut ¾x16: MU0892007160 - 16x¾" Press elbow swivel nut ¾x20: MU0892007200 - 20x¾" Press elbow swivel nut ¾x26: MU0892007260 - 26x¾" kit plaster fittings 90 ° - ½ "female 16x2,0 comisa press: MU08590KT010 ½" female 16x2 MU08590KT020 ½"female 20x2 Threaded fittings: Straight coupling: 88.03.415: RM057000016N - 16 x 2 88.03.420: RM057000X16N - 16 x 2 88.03.435: RM057000020N - 20 x 2 Straight reduction: 88.03.855: RM0570R2016N - 20 x 2 - 16 x 2 Male straight coupling ISO 7/2: 88.03.515: RM057100516N - 16 x 2 - ½” 88.03.520: RM05710X516N - 16 x 2 - ½” 88.03.535: RM057100520N - 20 x 2 - ½” 88.03.540: RM057100716N - 16 x 2 - ¾” 88.03.555: RM057100720N - 20 x 2 - ¾” Male straight coupling with O-Ring seal: 88.03.610: RM057200516N - 16 x 2 - ½” 88.03.620: RM05720X516N - 16 x 2 - ½” 88.03.635: RM057200520N - 20 x 2 - ½” Female straight coupling: 88.03.710: RM058000516N - 16 x 2 - ½” 88.03.715: RM05800X516N - 16 x 2 - ½” 88.03.730: RM058000520N - 20 x 2 - ½” 88.03.735: RM058000716N - 16 x 2 - ¾” 88.03.750: RM058000720N - 20 x 2 - ¾” Pressure test plugs: 87.31.605: RM058100016N - 16 x 2 87.31.615: RM058100020N - 20 x 2 Elbow 90°: 88.04.015: RM056000016N - 16 x 2 88.04.020: RM056000X16N - 16 x 2 88.04.035: RM056000020N - 20 x 2 Male elbow 90°: 88.04.115: RM056100516N - 16 x 2 - ½” 88.04.120: RM05610X516N - 16 x 2 - ½” 88.04.135: RM056100520N - 20 x 2 - ½” 88.04.140: RM056100716N - 16 x 2 - ¾” 88.04.155: RM056100720N - 20 x 2 - ¾” Female elbow 90°: 88.04.215: RM056200516N - 16 x 2 - ½” 88.04.220: RM05620X516N - 16 x 2 - ½” 88.04.235: RM056200520N - 20 x 2 - ½” 88.04.240: RM056200716N - 16 x 2 - ¾” 88.04.255: RM056200720N - 20 x 2 - ¾” Elbow with wallplate 90°: 88.04.315: RM056300516N - 16 x 2 - ½” 88.04.320: RM05630X516N - 16 x 2 - ½” 88.04.335: RM056300520N - 20 x 2 - ½” 88.04.350: RM056300716N - 16 x 2 - ¾” 88.04.365: RM056300720N - 20 x 2 - ¾” Tee: 88.04.515: RM055000016N - 16 x 16 x 16 88.04.520: RM055000X16N - 16 x 16 x 16 88.04.535: RM055000020N - 20 x 20 x 20 Reducing Tee: 88.04.558: RM055300BAAN - 20 x 2 - 16 x 2 - 16 x 2 88.04.560: RM055300BABN - 20 x 2 - 16 x 2 - 20 x 2 88.04.566: RM055300BBAN - 20 x 2 - 20 x 2 - 16 x 2 Male Tee: 88.04.715: RM055100516N - 16 x ½” x 16 88.04.720: RM055100716N - 16 x ¾” x 16 88.04.735: RM055100720N - 20 x ¾” x 20 Female Tee: 88.04.615: RM055200516N - 16 x ½” x 16 88.04.620: RM05520X516N - 16 x ½” x 16 88.04.635: RM055200520N - 20 x ½” x 20 88.04.640: RM055200716N - 16 x ¾” x 16 88.04.655: RM055200720N - 20 x ¾” x 20 Nipples press x compression: 87.47.020: MU0877016150 - 16 x 2 - 15 mm 87.47.030: MU0877020220 - 20 x 2 - 22 mm 87.47.035: MU0877026220 - 26 x 3 - 22 mm 87.47.040: MU0877026280 - 26 x 3 - 28 mm 87.47.080: MU0886I20220 - 20 x 2 - 22 mm Ireland 87.47.081: MU0886I26220 - 26 x 3 - 22 mm Ireland : MU0886026220 - 26 x 3 - 22 mm

Product Images

Approval Holder:

Comisa S.p.A

Company Name

Comisa S.p.A

Address

Via Neziole,27 Pisogne (BS)

Postcode

25055

Country

Italy

Phone

+39 0364 896861

General Email

info@comisa.it

View All Listings by this Company

Manufacturer:

Comisa S.p.A

Company Name

Comisa S.p.A

Address

Via Neziole,27 Pisogne (BS)

Postcode

25055

Country

Italy

Phone

+39 0364 896861

General Email

info@comisa.it

View All Listings by this Company