Range of magnetic, electrolytic or combined magnetic & electrolytic scale inhibitors with nickel plated copper bodies, for use with copper pipe manufactured to BS EN 1057. Maximum working pressure 12.0 bar. Cold water use only.

Section:

2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic

Size:

15mm or 22mm compression.

Marking:

Product name Wyndam on adhesive label.

Installation Requirements:

R001 R120 R170

Expiry date:

30/11/2027

Model:

WYNDAM 15 MAGNETIC, WYNDAM 22 MAGNETIC, WYNDAM 15 ELECTROLYTIC & WYNDAM 22 ELECTROLYTIC WATER CONDITIONERS,

Approval Holder:

FORTIS MERCHANTS LTD

Company Name

FORTIS MERCHANTS LTD

Address

SUSSEX HOUSE QUARRY LANE

Postcode

PO19 8PE

View All Listings by this Company

Range of UV disinfection units with stainless steel bodies. Maximum working pressure 10.3 bar. Maximum operating temperature 60°C.

Section:

2411 Disinfection Equipment

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

Luminor Rainier, model, WRAS and serial number on adhesive label on body

Installation Requirements:

R001 R150 R170

Expiry date:

31/05/2029

Model:

Single Lamp UV Disinfection Units: LRx-35X Rainier - 1½” NPT (M). LRx-55X Rainier - 2” NPT (M). LRx-85X Rainier - 2” NPT (M). Double Lamp UV Disinfection Units: LRx-110X Rainier - 2½” NPT (M). LRx-140X Rainier - 3” NPT (M). LRx-175X Rainier - 4” NPT (M). X denotes a UV sensor or a glow plug and is replaced with: 5= Glow Plug & 6 = UV Sensor. X denotes the type of power cord and is replaced with: 1 = NEMA 5/15. 2 = CEE 7/7. 3 = BS1363. 4 = AS/NZ 3112. 5 = NEMA 6/15. Additional Suffixes can be used for different lamps or sensor calibrations: HW, TOC or 50.

Approval Holder:

Luminor Environmental Inc.

Company Name

Luminor Environmental Inc.

Address

80 Southgate Drive, Unit 4, Guelph, ON Guelph

Postcode

N1G 4P5

Country

Canada,

View All Listings by this Company

'NAVCOAT-001 HT'. Factory applied, black coloured bitumen based paint. Apply as per manufacturer's data sheet 'NCB/001', issue date '12.07.2023'. Cure 7 days@30°C. For use with water up to 60°C.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

240455017

Expiry date:

30/04/2029

Approval Holder:

Nav Durga Chromatics Private Limited

Company Name

Nav Durga Chromatics Private Limited

Address

Jivan Nivas, 30A Block-R, New Alipore, 2nd Floor, Kolkata 700053

Country

India

Phone

+91 33 3254 6025/+91 98308 48300

General Email

navcoat@yahoo.co.in/navcoat@gmail.com

View All Listings by this Company

'Jotapipe IL 6001-120S'. Factory applied, blue coloured fusion bonded epoxy coating. Apply as per manufacturer`s TDS dated 22nd August 2018. Cure for 35 minutes@200°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

240755009

Expiry date:

31/07/2029

Approval Holder:

Jotun Powder Coatings Saudi Arabia Co. Ltd.

Company Name

Jotun Powder Coatings Saudi Arabia Co. Ltd.

Address

P.O. Box 10830, Dammam 31443

Country

Saudi Arabia

View All Listings by this Company

'Sikadur® ADH2200 (formerly known MasterBrace® ADH2200)'. Site applied, grey coloured (once applied), two component Epoxy bedding and mortar. Mix parts A and B in a weight ratio of 60:40 and apply as per manufacturer's Product Data Sheet 'MBS_CC-UAE/Br_2200_12_94/v4/07_19/v5/05_20/v6/01_24/v7/03_24'. Cure for 21 days@25°C. For use with water up to 40°C. This material is only approved for the mixing & curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

240455061

Expiry date:

30/04/2029

Approval Holder:

SIKA UAE LLC/Sika MB Construction Chemicals L.L.C

Company Name

SIKA UAE LLC/Sika MB Construction Chemicals L.L.C

Address

Head Office: P.O. Box 37127, Dubai Investment Park, Phase 1 Expo Road, Dubai

Country

United Arab Emirates

View All Listings by this Company