DHDC-7500. Grey coloured, factory applied 2-Part epoxy resin coating. Mix base (A) and hardener (B) in a ratio of 3 (A):1 (B) by weight before applying one coat by airless spray. Cure for 7 days at 25°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5036 Coatings, Paint and Linings (Factory Applied) - Multi-Purpose

Expiry date:

31/03/2026

Approval Holder:

Noroo Paint & Coatings Co., Ltd

Company Name

Noroo Paint & Coatings Co., Ltd

Address

351, Bakdal-ro, Manan-gu, Anyand-si, Gyeonggido, 13977 South Korea

View All Listings by this Company

'CeramycGuard for use with QuartzSeal'. Site applied, white coloured (once mixed) polymer based concrete surface treatment. 'CeramycGuard’ is a three-component base coat comprising of Part A (clear liquid), Part B (grey powder) & Part C (clear liquid). Mix Parts A, B & C in a volume ratio. Rest for two minutes, apply as per manufacturer's instructions for use 'version 2' dated 'April 2021' and then cure for 24 hours@21°C. ‘QuartzSeal' is a white coloured, single-component topcoat. Apply as per manufacturer's instructions for use 'version 2' dated 'April 2021'. Cure for 7 days@21°C. For use with water up to 23°C. These materials are only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5038 Coatings, Paints & Linings

Section Subtitle:

Site applied concrete coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2104532

Expiry date:

30/04/2026

Approval Holder:

Haydale Technologies Inc.

Company Name

Haydale Technologies Inc.

Address

1446 S. Buncombe Road, Greer, SC 29651

Country

United States

View All Listings by this Company

'LATTYflon 2790AL'. Cream coloured, PTFE/silicone braided rope with a square cross-section. For use with water up to 23°C. For use only as a gland packing material having been tested at a reduced surface area to volume ratio.

Section:

5100 Gland Packings

Expiry date:

30/04/2026

Approval Holder:

Latty International

Company Name

Latty International

Address

1, Rue Xavier Latty, 28160 Brou

Country

France

Phone

+33 (0) 2 37 44 77 77

View All Listings by this Company

'Solico Ivory GRP Panel'. Beige coloured, compression moulded GRP panel. For use with water up to 60°C.

Section:

5120 Glass Reinforced Plastics (GRP)

Section Subtitle:

Components.

WRAS Approval Number:

2104534

Expiry date:

30/04/2026

Approval Holder:

Solico Fiberglass Factory L.L.C.

Company Name

Solico Fiberglass Factory L.L.C.

Address

Jebel Ali Industrial Area, Dubai, UAE

View All Listings by this Company

'JUSTLINK® JLPEX'. Single layered, off-white (translucent), extruded PEX hose. For use with water up to 60°C.

Section:

5140 Hoses & Tubing

Expiry date:

30/04/2026

Approval Holder:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road Yuhuan Economic Development Zone Yuhuan

Postcode

317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company