Directory Search Results

Print List

#251216302

Section:
2011 Shower Valves
Description:
A Shower valve(s) with thermostatic temperature control, incorporating a manual diverter between outlets.
Wall Mounted Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
F1200*chrome or matte black3/4” BSP(F)5 bar85 °CKY-LINon bodyNoCeramic cartridge

Notes & Further Information

Where * denotes the finish color, and can be replaced with the following: CHR = Chrome BLK = Matte Black The inlets incorporate stainless steel strainers and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection.


Approval Holder:
KYLIN Sanitary Technology (Xiamen) Co., Ltd
Company Name
KYLIN Sanitary Technology (Xiamen) Co., Ltd
Address
No.878, Tongfu Road, Tong’an District, Xiamen City, Fujian Province
Postcode
361100
Country
China
Phone
+86 159 8082 4540
General Email
961459820@qq.com

View All Listings by this Company
Manufacturers:
KYLIN Sanitary Technology (Xiamen) Co., Ltd

Print This Approval


#260102707

Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass body, compression models are nickel plated. A drain port is provided between the cartridges. Compression models are to be used with copper pipe (manufactured to BS EN 1057). Maximum working pressure 10.0 Bar Maximum operating temperature: 85.0°C (Fig 250W models) or 60.0°C (Fig 250CW models)

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
260102707
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2”, ¾”, 1.1/4” or 1.1/2” BSP (F) (Fig 250W models) 15 & 22mm compression (Fig 250CW models)
Marking:
Hattersley logo, DN, PN, flow arrow and CR on body.
Installation Requirements:
R001
Expiry date:
31/01/2031
Model:
Fig 250W Fig 250CW

Approval Holder:
Hattersley
Company Name
Hattersley
Address
11-15 Epsilon Terrace West Road Ipswich Suffolk
Postcode
IP3 9FJ
Country
United Kingdom
Phone
0766465023
General Email
tturner@cranebsu.com

View All Listings by this Company

Print This Approval


#260115306

Section:
0440 Headworks
Description:
A Range of Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
Plastic body/bodies
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001
Expiry date:
31/01/2031

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
T260926mm16 bar85 °CCompany brand, WRASBodyNoCeramic cartridge
T350335mm16 bar85 °CCompany brand, WRASBodyNoCeramic cartridge
T350535mm16 bar85 °CCompany brand, WRASBodyNoCeramic cartridge
T400340mm16 bar85 °CCompany brand, WRASBodyNoCeramic cartridge
T400540mm16 bar85 °CCompany brand, WRASBodyNoCeramic cartridge
T350735mm16 bar85 °CCompany brand, WRASBodyNoCeramic cartridge
T350635mm16 bar85 °CCompany brand, WRASBodyNoCeramic cartridge
T401040mm16 bar85 °CCompany brand, WRASBodyNoCeramic cartridge
T351135mm16 bar85 °CCompany brand, WRASBodyNoCeramic cartridge
T351635mm16 bar85 °CCompany brand, WRASBodyNoCeramic cartridge

Approval Holder:
Wenzhou City Yuebo Cartridge Co., Ltd
Company Name
Wenzhou City Yuebo Cartridge Co., Ltd
Address
22-9 Luomei Avenue, Haicheng Street Wezhou
Postcode
325055
Country
China
General Email
5273363642@qq.com

View All Listings by this Company
Manufacturers:
Wenzhou City Yuebo Cartridge Co., Ltd

Print This Approval


#260215901

Section:
0445 Combination Tap Assemblies
Description:
A Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
Deck Mounted kitchen tap. Inlet hoses are stainless steel braided & PEX lined. Undefinable Air Gap – See IRN’s
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R009 R090
Expiry date:
28/02/2031

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
K009*VariousCaptive nut G1/2"10 bar65 °CWINSDRUMOn bodyNo1/4 Turn ceramic discMetal BacknutsAeratorFlow Regulator Fitted,

Notes & Further Information

* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black


Approval Holder:
WINSDRUM Technology (Foshan) Co., Ltd
Company Name
WINSDRUM Technology (Foshan) Co., Ltd
Address
Room 804-805, Flat 2, Jiabang Guojin Center, No.1 Shilong South Road, Guicheng Street, Nanhai District, Foshan City, Guangdong Province
Country
China
Phone
0086-19527590441
General Email
carina07@126.com

View All Listings by this Company

Print This Approval


#260115314

Section:
0450 Combination Tap Assemblies
Description:
A Range of Single hole tap(s) with a single outlet and a fixed spout.
Deck Mounted Capable of achieving AUK3 tap gap PEX lined stainless steel braided inlet hoses
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/01/2031

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
UALA305Chrome plated1/2" BSP (F)10 bar65 °CUK BATHROOMS LTDHandleNoCeramic cartridgeC-plateAerator
UKB8922WChrome plated1/2" BSP (F)10 bar65 °CUK BATHROOMS LTDHandleNoCeramic cartridgeC-plateAerator
UKB9072WChrome plated1/2" BSP (F)10 bar65 °CUK BATHROOMS LTDHandleNoCeramic cartridgeC-plateAerator
UKB7202WChrome plated1/2" BSP (F)10 bar65 °CUK BATHROOMS LTDHandleNoCeramic cartridgeC-plateAerator

Approval Holder:
UK Bathrooms Ltd
Company Name
UK Bathrooms Ltd
Address
Aston House Redburn Road Newcastle Upon Tyne
Postcode
NE5 1NB

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 247 of 275

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.