Range of wall mounted self-closing taps (chromium plated brass) with a dome type operating member. The SCHELL PETIT SC - 02 147 06 99 model incorporates a screwdriver operated servicing valve on the inlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C.

Section:

1820 Taps

Section Subtitle:

Self closing tap(s).

WRAS Approval Number:

250604029

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Schell on operating member

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

02 136 06 99 - SCHELL PETIT SC 02 147 06 99 - SCHELL PETIT SC

Approval Holder:

Schell GmbH & Co KG Armaturentechnologie

Company Name

Schell GmbH & Co KG Armaturentechnologie

Address

Raiffeisenstrasse 31 Olpe

Postcode

D-57462

Country

Germany

Phone

+492761892294

General Email

info@schell.eu

View All Listings by this Company

Manufacturer:

Schell GmbH & Co KG Armaturentechnologie

Company Name

Schell GmbH & Co KG Armaturentechnologie

Address

Raiffeisenstrasse 31 Olpe

Postcode

D-57462

Country

Germany

Phone

+492761892294

General Email

info@schell.eu

View All Listings by this Company

Equilibrium float valve with brass body, brass float arm and EPDM seals. Float not supplied and not covered under the scope of this approval. Maximum working pressure 10.0 Bar Cold water use only

Section:

2100 Valves

Section Subtitle:

Float operated, equilibrium, metal.

WRAS Approval Number:

250602713

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Float not supplied and not covered under the scope of this approval.

Size:

¾” - 2" BSP (M)

Marking:

PCO FLO, size and install line on body.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

PCO-FLO Equilbrium float valve range: BV-EQ/0.75PCO, BV-EQ/1.PCO, BV-EQ/114PCO, BV-EQ/112PCO, BV-EQ/2PCO.

Approval Holder:

Decca Plastics UK Ltd.

Company Name

Decca Plastics UK Ltd.

Address

Victoria Mill, Lincoln Street, Preston

Postcode

PR1 6RE

Country

Lancashire

Phone

+44 (0) 1772 725 757

View All Listings by this Company

Range of commercial dish washing machines. Flow is controlled by a solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure: 4.0 Bar. Maximum operating temperature: 60°C.

Section:

2390 Washing Machines

Section Subtitle:

Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

250402712

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

PVC bodied appliance hose with an EPDM inner liner incorporating a ¾” BSP (F) captive nut end connection.

Marking:

DC Products logo on control panel. DC Products logo, model name and other technical information on adhesive label on side of body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

ED50A, ED900A, SD40A, SXD40A, SD45A, SD50A, SXD45A, SXD50A, PG/PD40A, PG/PD45A, PG/PD50A, OG/OD40A, OG/OD50A, X600A, X700A, W700A, W1100, W1400A, W1400SA, SD900A, SD1000A, SD1300A, SD1350A, PD1000A, PD1300A, PD1350A, OD1400A, OD1425A, OD1450A, DC57-42A, DC57-62A, DC67A, DC109A. Key: SD = Standard series dish, SXD = Standard extra dish, ED = ECONOMY SERIES DISH, PG/PD = Premium series glass/Premium range dish, OG/OD = Optima series glass/dish W or X = washrite range. DC = Direct Catering Range (the numbers for the DC range also represent basket size). The number 40, 45 and 50 numbers relate to the basket size. The numbers 600, 700, 900, 1000, 1100, 1350, 1400 are arbitrary number or once related to the pump sizes. Any model that has the letter ‘A’ immediately after the model number signifies that the break tank has been fitted. Additional suffixes of varying character may be present after the letter ‘A’, e.g. ‘PD50A D’ List of available suffixes: BPI – boost pump CP – chemical pumps D – Drain pump DL – lock DP – detergent pump DR – Dryer HR – recovery IS – Softener LT – Light RDP – rinse and detergent pumps RP – rinse pump SW – Saniwash TD – thermos Disinfection UV – UV light. All the above models have the same pathway.

Approval Holder:

DC Products Ltd

Company Name

DC Products Ltd

Address

Unit 25 lodge hill Industrial Park Westbury Sub Mendip Somerset

Postcode

BA5 1EY

View All Listings by this Company

Range of water conditioners with stainless steel bodies. AFL012 MFB has a matt black finish and AFL012MFC has a chrome plate finish. Models with compression connections are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C.

Section:

2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Activflo, model and PN on adhesive label.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

30/06/2030

Model:

AFL010 - Activflo Lite Water Conditioner - 1” BSP Male, AFL012 - Activflo Lite Water Conditioner - ½” BSP Male, AFL012MFB - Activflo Solo Lite - 1/2" MBSP X 1/2 FBSP, AFL012MFC - Activflo Solo Lite - 1/2" MBSP X 1/2" FBSP, AFL034 - Activflo Lite Water Conditioner- 3/4” BSP Male, AFL0112 - ACTIVFLO LITE - 1 1/2" X 1 1/2" MBSP, AFL0114 - ACTIVFLO LITE - 1 1/4" X 1 1/4" MBSP, AFL015 - Activflo Lite Water conditioner - 15mm x 15mm compression, AFL022 - Activflo Lite Water conditioner - 22mm x 22mm compression, AFL028 - Activflo Lite Water conditioner - 28mm x 28mm compression.

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Range of hand showers and shower arm kits with (brass bodies - various finishes. The inlets of the hand showers and the inlet elbows incorporate approved check valve cartridges; however, the complete products have not been fully tested to demonstrate they provide backflow protection. Open outlet use only. Maximum operating temperature 65°C.

Section:

1670 Shower Outlets

Section Subtitle:

Shower kit(s)

WRAS Approval Number:

250602017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2" BSP female (with a ½” BSPP male adaptor for international use) for hand showers. 1/2" NPT male for shower arm.

Marking:

Waterworks logo on handset (BHS010, HNHS010 & CNHS10) Waterworks on escutcheon (BHS010 & BSH001CO)

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

Hand Showers: BHS010XZZ BHS010ZZ HNHS010ZZ CNHS10ZZ Shower Arm: BSH001XZZ Where XX denotes the finish and can be replaced by: AC = Antique Copper AB = Architectural Bronze AQB = Antique Brass BZ = Architectural Bronze C = Polished Chrome CO = Concordia DN = Dark Nickel G = Gold L = Lumin M = Matte Nickel MC = Matte Chrome MG = Matte Gold MS = Matte Silver N = Polished Nickel S = Silver SC = Shiny Copper SO = Sovereign UB = Unlacquered Brass Where XX denotes the handle components and can be replaced by: 0 = Less Handles 1 = Cross Handle 2 = Two‐Tone Cross Handle 3 = Coin Edge Cross Handle 10 = Solo Series Lever Handle 11 = Lever Handle 12 = Two‐Tone Lever Handle 13 = Coin Edge Lever Handle 14 = Walnut Lever Handle 15 = Leather Lever Handle 20 = Solo Series Straight Lever Handle 2A = Tandem Series Guilloche Lines Lever Handle 2B = Tandem Series Two‐Tone Lever Handle 2C = Union Series Guilloche Link Lever Handle 2D = Union Series Enamel Guilloche Lines Lever Handle 2E = Union Series Guilloche Pinstripe Lever Handle 2P = Solo Series Two‐Piece Straight Lever Handle 2S = Bond Rally Series Lever Handle 2T = Teak Lever Handle 30 = Solo Series Knob Handle 3S = Bond Rally Series Knob Handle 4A = Tandem Series Guilloche Lines Knob Handle 4B = Tandem Series Two‐Tone Guilloche Knob Handle 4D = Union Series Enamel Guilloche Lines Knob Handle 5C = Union Series Guilloche Link Knob Handle 7A = Tandem Series Guiloche Lines Lever handles with Gland Cover 7B = Tandem Series Two Tone Lever handles with Gland Cover 7C = Union Series Guiloche Link Lever handles with Gland Cover 7D = Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E = Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P = Solo Series Two Piece Straight Lever handle with Gland Cover 7S = Bond Rally Series Lever Handle With Gland Cover 7T = Tandem Series Teak lever with Gland Cover 8Z = Straight Lever Handle 90 = Solo Series Straight Lever handles with Gland Cover

Approval Holder:

Waterworks

Company Name

Waterworks

Address

60 Backus Ave, Danbury, CT 06810

Country

USA

Phone

(203) 546 6140

View All Listings by this Company