Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2201344

Range of water meter manifolds (plastic body). Model WB31520CG incorporates a single check valve cartridge and model WB31520CGDCV two single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 16.0 bar. Cold water use only.

Section:: 1510 Water Meter Manifolds
Size:: ¾” BSP (F)
Marking:: Talis on base. Flow arrow on manifold box.
Installation Requirements:: R001 R008
Expiry date:: 31/01/2027
Model:: Talbot Matrix: WB31520CG WB31520CGDCV

Product Images

Approval Holder:: Atlantic Plastics Ltd.

Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:: Atlantic Plastics Ltd.

Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

WRAS Approval Number: #2201802

Water hammer arrestor with brass body. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:: 1530 Miscellaneous Fittings
Marking:: RBM on body
Installation Requirements:: R001
Expiry date:: 31/03/2026
Model:: 30720400

Approval Holder:: RBM S.p.a.

Company Name
RBM S.p.a.
Address
Componenti Per Impianti Idrotermici Via S. Giuseppe, 1 25075 Nave (Brescia)
Country
Italy

View All Listings by this Company

WRAS Approval Number: #2112359

Y type fittings incorporating brass body and NBR washer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1530 Miscellaneous Fittings
Size:: ¾” BSP (F) captive nut x ¾” BSP( M) x 3/4” BSP (M)
Marking:: Flomasta (Brand of Kingfisher), PN10, and size on body.
Installation Requirements:: R001
Expiry date:: 31/12/2026
Model:: EPH_WAS20_0056

Product Images

Approval Holder:: Kingfisher PLC

Company Name
Kingfisher PLC
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

WRAS Approval Number: #2201332

Range of pump inverters with plastic bodies, NBR rubber and EPDM rubber seals and ‘O’-rings. The products incorporate an inline resilient trim non-return valve. Maximum working pressure 13.0 bar. Cold water use only.

Section:: 1530 Miscellaneous Fittings
Size:: 1¼” BSP (M) inlet x 1½” BSP (F) outlet.
Marking:: DAB Water Technology on front casing. Manufacturer name, CE marking, date of manufacture (N.X.YYWW, where N.x = product revision index) and other technical information on adhesive label on side of casing.
Installation Requirements:: R001
Expiry date:: 31/01/2027
Model:: Active driver plus M/T 1.0 Active driver plus M/T 2.2 Active driver plus T/T 3 Active driver plus T/T 5.5 Active driver plus M/M 1.1 Active driver plus M/M 1.8/DV Active driver plus M/M 1.5/DV Models are named “Active driver plus x/y z” or “Active driver plus x/y z/DV” Where: x indicates the configuration of the entry line, which can be monophase (“M”) or threephase (“T”), y indicates the configuration of the exit line, which can be monophase (“M”) or threephase (“T”), z indicates the maximum mechanical power of the pump’s motor and “DV” indicates dual voltage models (able to work at 115V or at 230V).

Product Images

Approval Holder:: DAB PUMPS SPA

Company Name
DAB PUMPS SPA
Address
Via Marco Polo 14 Mestrino (PD)
Postcode
35035
Country
Italy
General Email
certifications@dwtgroup.com

View All Listings by this Company
Manufacturer:: DAB PUMPS SPA

Company Name
DAB PUMPS SPA
Address
Via Marco Polo 14 Mestrino (PD)
Postcode
35035
Country
Italy
General Email
certifications@dwtgroup.com

View All Listings by this Company

WRAS Approval Number: #2201032

Bypass valve assembly with a plastic body and push/pull operating method to switch flows between different outlets. The product incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1530 Miscellaneous Fittings
Size:: ¾” BSP (M)
Marking:: Culligan (owners of Harvey Water Softeners), CBP01 and flow arrows on body.
Installation Requirements:: R001 R008
Expiry date:: 31/01/2027
Model:: G3920

Product Images

Approval Holder:: Harvey Water Softeners

Company Name
Harvey Water Softeners
Address
Hipley Street Old Woking Surrey
Postcode
GU22 9LQ
Country
United Kingdom
Phone
01483 753430
General Email
papillon.bleeker@harvey.co.uk

View All Listings by this Company

WRAS Approval Number: #2112012

Union ball, non-return valve with a plastic PVC body. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 2112012
Note:: Does not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should not be made to `Backflow Prevention Devices`.
Size:: 20mm (F) solvent cement connection
Marking:: Company logo (ERA), PN and size on body
Installation Requirements:: R001
Expiry date:: 31/12/2026
Model:: UBC02 20mm

Product Images

Approval Holder:: ERA Piping (Zhejiang) Co.,Ltd.

Company Name
ERA Piping (Zhejiang) Co.,Ltd.
Address
No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang
Country
China

View All Listings by this Company
Manufacturer:: ERA Piping (Zhejiang) Co.,Ltd.

Company Name
ERA Piping (Zhejiang) Co.,Ltd.
Address
No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2112057

Range of pumps with stainless steel bodies and plastic impellors. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2112057
Size:: 1½” BSP (M) or 2” (M) inlet/outlet.
Marking:: Wilo SE, model and product info on data plate on body
Installation Requirements:: R001 R415
Expiry date:: 31/12/2026
Model:: Para MAXO-Z 25-180-08. Para MAXO-Z 25-180-10. Para MAXO-Z 30-180-08. Para MAXO-Z 30-180-10.

Product Images

Approval Holder:: Wilo SE

Company Name
Wilo SE
Address
Werk Hof, Heimgartenstr. 1-3, 95030 Hof/Saale
Country
Germany

View All Listings by this Company

WRAS Approval Number: #2201059

‘EVE Whole house’ twin impeller booster pump with a plastic body and impellers and EPDM ‘O’-rings. The inlet and outlet hoses incorporate a screwdriver operated isolation valve. The pump body outlets incorporate a non-return valve. The product is supplied with two loose combined EPDM and stainless steel inlet washers and two loose EPDM outlet washers. Maximum working pressure 3.0 bar. Maximum operating temperature 65°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2201059
Size:: Quadruple layered flexible hose consisting of a black coloured TPE inner layer, PVC middle layer, braided PE third layer and grey outer layer with 22mm pushfit end connections.
Marking:: Salamander logo on top cover. Salamander logo, maximum temperature, maximum pressure, and product info on adhesive label on lid. Flow arrow on body.
Installation Requirements:: R001 R150 R415
Expiry date:: 31/01/2027
Model:: EVE Whole House Booster Pump: EVETU (twin variant).

Product Images

Approval Holder:: Salamander Pumps

Company Name
Salamander Pumps
Postcode
SR5 3XE
Country
United Kingdom
Phone
0191 535 4528
General Email
lewisw@salamanderpumps.co.uk

View All Listings by this Company
Manufacturer:: Salamander Pumps

Company Name
Salamander Pumps
Postcode
SR5 3XE
Country
United Kingdom
Phone
0191 535 4528
General Email
lewisw@salamanderpumps.co.uk

View All Listings by this Company

WRAS Approval Number: #2112045

‘ECOCIRC XL N’ & ‘ECOCIRC XL PLUS N’ range of circulation pumps with stainless steel bodies, plastic impellers, and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2112045
Size:: 1½”-2” BSP (M). DN32-65 flanged.
Marking:: Lowara (brand of Xylem) and Lowara logo, manufacturer name (xylem brand) and technical information on adhesive label on top of pump.
Installation Requirements:: R001
Expiry date:: 31/12/2026
Model:: ECOCIRC-XL N X1-X2 X3 X4 & ECOCIRC-XL PLUS N X1-X2 X3 X4. Where: ECOCIRC XL = series name. PLUS = with communication capabilities. N = stainless steel. X1 = port nominal diameter in mm (25 or 32 threaded models, where 25 = 1½” BSP (M), 32 = 2” BSP (M), 32-65 on flanged models). X2 = maximum head in m x 10. X3 = maximum flow - low flow versions - ‘empty’ = standard version. X4 = flange type - F = flanged, ‘empty’ = threaded BSP (M). Examples: ECOCIRC-XL N 25-40 & ECOCIRC XL PLUS N 65-120F.

Product Images

Approval Holder:: Xylem Service Italia S.r.l

Company Name
Xylem Service Italia S.r.l
Address
Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza
Country
Italy
Phone
0039 0444 707111

View All Listings by this Company
Manufacturer:: Xylem Service Hungary Kft.

Company Name
Xylem Service Hungary Kft.
Address
Külso-Kátai út. 41 HU-2700 Cegléd
Phone
+36-53-510502

View All Listings by this Company

WRAS Approval Number: #2110038

Range of showers handsets with plastic bodies (various finishes - see model). All models incorporate a stainless steel strainer, the EcoSmart models also incorporate a plastic flow regulator. Maximum operating temperature 60°C.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2110038
Note:: Open outlet use only.
Size:: ½” BSP (M).
Marking:: HANSGROHE on body.
Installation Requirements:: R001 R040
Expiry date:: 31/10/2026
Model:: 26 800 xxx Hansgrohe Croma Select S Hand shower Multi. 26 801 xxx Hansgrohe Croma Select S Hand shower Multi EcoSmart 9 l/min. 26 802 xxx Hansgrohe Croma Select S Hand shower Vario. 26 803 xxx Hansgrohe Croma Select S Hand shower Vario EcoSmart 9 l/min. 26 804 xxx Hansgrohe Croma Select S Hand shower 1jet. 26 805 xxx Hansgrohe Croma Select S Hand shower 1jet EcoSmart 9 l/min. 26 806 xxx Hansgrohe Croma Select S Hand shower 1jet EcoSmart 7 l/min. Model added November 2023: 26 643 xxx Hansgrohe MySelect S Hand shower Vario EcoSmart 9 l/min. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company