‘HydroDOS’ chlorine dioxide dosing system with PVC-u pipework, water meter, strainer, isolation valves and a drain cock with hose spigot. Maximum working pressure 6.0 bar. Cold water use only.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

251202715

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

20mm PVC solvent weld connection

Marking:

HydroDOS, model, WRAS and technical data on adhesive label on body.

Installation Requirements:

R001 R120 R160 R170 R415 R511 R575

Expiry date:

31/12/2030

Model:

HydroDOS HD550G Chlorine dioxide generator (215 g/hr max). HydroDOS HD600G Chlorine dioxide generator (600 g/hr max).

Approval Holder:

Hydrotec International Water Treatment Limited

Company Name

Hydrotec International Water Treatment Limited

Address

38 Main Street Swords Country Dublin

Country

Ireland

View All Listings by this Company

Filling valve with a DZR brass body comprising of: Two check valve cartridges on the inlet, verified by test (suitable for backflow protection against Fluid Category 3), a pressure reducing valve preset at 1.4 bar, a sprung loaded self-closing valve and a single check valve cartridge on the outlet, verified by test (suitable for backflow protection against Fluid Category 2). There is a drain port below the self-closing valve chamber. Compression connections are for use with copper pipe (manufactured to EN 1057). Maximum inlet supply pressure 10.0 bar. Maximum operating temperature 100°C.

Section:

1015 Filling Loop

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm x 15mm compression.

Marking:

‘EAGLE’ (brand of SCE TECHNOLOGY (NINGBO) CO., LTD), DN,CR, PN and arrow on body.

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

S0435-1-00-C

Approval Holder:

SCE Technology (Ningbo) Co., Ltd

Company Name

SCE Technology (Ningbo) Co., Ltd

Address

No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Ningbo Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

SCE Technology (Ningbo) Co., Ltd

Company Name

SCE Technology (Ningbo) Co., Ltd

Address

No.12, Xinxing Road, Chalu Town, Ninghai County, Ningbo City, Zhejiang Province

Country

China

View All Listings by this Company

Range of water meters with blue epoxy coated brass or iron bodies (see models) and a plastic strainer on the inlet. Maximum working pressure 16.0 Bar or10.0 Bar(see models). Maximum operating temperature 50°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Company logo, size, flow direction on body.

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

LXSG DN15 Dry dial, copper/iron shell, thread ,1/2” (M) BSP,16bar LXSG DN20 Dry dial, copper/iron shell, thread ,3/4” (M) BSP,16bar LXSG DN25 Dry dial, copper/iron shell, thread ,1” (M) BSP,16bar LXSG DN32 Dry dial, copper/iron shell, thread ,1-1/4” (M) BSP,16bar LXSG DN40 Dry dial, copper/iron shell, thread ,1-1/2” (M) BSP,16bar LXSG DN50 Dry dial, copper/iron shell, thread ,2” (M) BSP,16bar LXLG DN65 Dry dial, iron case, fixed flange - British standard DN65, 16bar LXLG DN80 Dry dial, iron case, fixed flange - British standard DN80, 16bar LXLG DN100 Dry dial, iron case, fixed flange - British standard DN100, 16bar LXLG DN125 Dry dial, iron case, fixed flange - British standard DN125, 16bar LXLG DN150 Dry dial, iron case, fixed flange - British standard DN150, 16bar LXSGY DN15 Dry dial, copper/iron shell, thread,1/2” (M) BSP,16bar LXSGY DN20 Dry dial, copper/iron shell, thread,3/4” (M) BSP,16bar LXSGY DN25 Dry dial, copper/iron shell, thread,1” (M) BSP,16bar LXSGY DN32 Dry dial, copper/iron shell, thread,1-1/4” (M) BSP,16bar LXSGY DN40 Dry dial, copper/iron shell, thread,1-1/2” (M) BSP,16bar LXSGY DN50 Dry dial, copper/iron shell, thread, 2” (M) BSP,16bar LXLGY DN65 Dry dial, iron case, fixed flange - British standard DN65,16bar LXLGY DN80 Dry dial, iron case, fixed flange - British standard DN80,16bar LXLGY DN100 Dry dial, iron case, fixed flange - British standard DN65,16bar LXLGY DN100 Dry dial, iron case, fixed flange - British standard DN65,16bar LXLGY DN125 Dry dial, iron case, fixed flange - British standard DN125,16bar LXLGY DN150 Dry dial, iron case, fixed flange - British standard DN150,16bar LXSGY DN15 Dry dial, copper/iron shell, thread, 1/2” (M) BSP, 16bar LXSGY DN20 Dry dial, copper/iron shell, thread, 3/4” (M) BSP, 16bar LXSGY DN25 Dry dial, copper/iron shell, thread, 1” (M) BSP, 16bar LXSGY DN32 Dry dial, copper/iron shell, thread, 1-1/4” (M) BSP, 16bar LXSGY DN40 Dry dial, copper/iron shell, thread, 1-1/2” (M) BSP, 16bar LXSGY DN50 Dry dial, copper/iron shell, thread, 2” (M) BSP, 16bar LXLGY DN65 Dry dial, iron case, fixed flange - British standard, DN65,16bar LXLGY DN80 Dry dial, iron case, fixed flange - British standard, DN80,16bar LXLGY DN100 Dry dial, iron case, fixed flange - British standard, DN100,16bar LXLGY DN125 Dry dial, iron case, fixed flange - British standard, DN125,16bar LXLGY DN150 Dry dial, iron case, fixed flange - British standard, DN150,16bar LXSK DN15 Wet-dial, copper shell, thread, 1/2” (M) BSP,10bar LXSK DN20 Wet-dial, copper shell, thread, 3/4” (M) BSP,10bar LXSK DN25 Wet-dial, copper shell, thread, 1” (M) BSP,10bar LXSK DN32 Wet-dial, copper shell, thread, 1-1/4” (M) BSP,10bar LXSK DN40 Wet-dial, copper shell, thread, 1-1/2” (M) BSP,10bar LXSK DN50 Wet-dial, copper shell, thread, 2” (M) BSP,10bar LXSK DN15 Wet-dial,copper shell, thread ,Bluetooth, 1/2” (M) BSP,10bar LXSK DN20 Wet-dial,copper shell, thread ,Bluetooth, 3/4” (M) BSP,10bar LXSK DN25 Wet-dial,copper shell, thread ,Bluetooth, 1” (M) BSP,10bar LXSK DN32 Wet-dial,copper shell, thread ,Bluetooth, 1-1/4” (M) BSP,10bar LXSK DN40 Wet-dial,copper shell, thread ,Bluetooth, 1-1/2” (M) BSP,10bar LXSK DN50 Wet-dial,copper shell, thread ,Bluetooth, 2” (M) BSP,10bar LXSKY DN15 Wet-dial,copper shell, thread , MBUS, 1/2” (M) BSP, 10bar LXSKY DN20 Wet-dial,copper shell, thread , MBUS, 3/4” (M) BSP, 10bar LXSKY DN25 Wet-dial,copper shell, thread , MBUS, 1” (M) BSP, 10bar LXSKY DN32 Wet-dial,copper shell, thread , MBUS, 1-1/4” (M) BSP, 10bar LXSKY DN40 Wet-dial,copper shell, thread , MBUS, 1-1/2” (M) BSP, 10bar LXSKY DN50 Wet-dial,copper shell, thread , MBUS, 2” (M) BSP, 10bar

Approval Holder:

Shandong Chenhui Electronic Technology Co.,Ltd.

Company Name

Shandong Chenhui Electronic Technology Co.,Ltd.

Address

East of Longteng Road South of Guihua Branch Road Tai'an High-tech Zone Taian City, Shandong.P.R.China Shandong.

Country

China

Phone

+86 0531- 87856308

General Email

Joh.huo@meide-casting.com

View All Listings by this Company

Manufacturer:

Shandong Chenhui Electronic Technology Co.,Ltd.

Company Name

Shandong Chenhui Electronic Technology Co.,Ltd.

Address

East of Longteng Road South of Guihua Branch Road Tai'an High-tech Zone Taian City, Shandong.P.R.China Shandong.

Country

China

Phone

+86 0531- 87856308

General Email

Joh.huo@meide-casting.com

View All Listings by this Company

Range of flow sensors with brass bodies (various grades - see model). Maximum working pressure 16.0 bar. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M). Internal turbine: 19.54mm O.D

Marking:

With body: SIKA Systemtechnik GmbH logo (SIKA) and address, PN, Part No., CE and batch code (WW YY) on adhesive label on cable. Flow arrow on body. Internal turbine without body: Serial No., SIKA Systemtechnik GmbH logo (SIKA) and batch code (WW YY) on body.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

Flow sensors type series VTY15: VY1545abcdefgh & VY1545MAHNefA4 Where: ab = body material (MA = Brass CW617N-DW, MC = Brass CW510L, MK = Brass CW724R, K5 = without body, only the internal turbine system) cd = sensor and signal output (HN = Hall sensor-NPN, 00 = without sensor) ef = electrical cable connection (various - in combination can be 00…99 or AA…ZZ, examples 05 = 500mm, 12=1200mm, X1=80mm with Molex plug connector) gh = process connection (A4 = G3/4 male thread, YY = without, only possible with ab = K5) VY1545abyyyyyzz Where: ab = body material (MA = Brass CW617N-DW, MC = Brass CW510L, MK = Brass CW724R, K5 = without body, only the internal turbine system) yyyyy = name of customer (5 digits, e.g. SCHMI, MUELL, …) zz = consecutive number (2 digits, 01…99) & Internal turbine only: VY1545K50000YY

Approval Holder:

SIKA Systemtechnik GmbH

Company Name

SIKA Systemtechnik GmbH

Address

Struthweg 7-9 Kaufungen

Postcode

34260

Country

Germany

Phone

+49 5605 803 652

General Email

grass@sika.net

View All Listings by this Company

Manufacturer:

SIKA Systemtechnik GmbH

Company Name

SIKA Systemtechnik GmbH

Address

Struthweg 7-9 Kaufungen

Postcode

34260

Country

Germany

Phone

+49 5605 803 652

General Email

grass@sika.net

View All Listings by this Company

Screw down, angled isolation valve with a dome type operating member, incorporating a DZR brass body. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) x ⅜” BSP (M).

Marking:

FANSKI and DR on body.

Installation Requirements:

R001

Expiry date:

28/02/2031

Model:

AP145

Approval Holder:

Fanski Group Inc.

Company Name

Fanski Group Inc.

Address

NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang

Postcode

317600

Country

China

View All Listings by this Company

Manufacturer:

Fanski Group Inc.

Company Name

Fanski Group Inc.

Address

NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang

Postcode

317600

Country

China

View All Listings by this Company