Range of ultrasonic water meters with brass bodies, plastic transducers and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M)x(M) (DN15), 1” BSP (M)x(M) (DN20), 1¼” BSP (M)x(M) (DN25), 1½” BSP (M)x(M) (DN32), 2” BSP (M)X(M) (DN40).

Marking:

Lianyungang Tengyue Electronic Technology Co., Ltd. registered trademark logos (either ‘TENGYUE METERING’ or ‘METERING’), model, size, Q3, IP, MAP and manufacturing month and year on meter face. DN and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

TS14W.

Product Images

Approval Holder:

Lianyungang Tengyue Electronic Technology Co., Ltd.

Company Name

Lianyungang Tengyue Electronic Technology Co., Ltd.

Address

No.15 Xinlong Road, Haizhou Economic Development Zone, Lianyungang City

Country

China

View All Listings by this Company

Manufacturer:

Lianyungang Tengyue Electronic Technology Limited

Company Name

Lianyungang Tengyue Electronic Technology Limited

Address

No.15 Xinlong Road, Haizhou Economic Development Zone, Lianyungang City, Jiangsu Province

Country

China

View All Listings by this Company

Range of wall brackets (brass bodies – various finishes). Open outlet use only Maximum working temperature 85°C

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

ACY1013 & ACY1014 Aqualisa on body 706083 Elisa on body

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

ACY1013 BRASS WALL OUTLET ACY1014 BRASS WALL OUTLET WITH COMBINED HANDSET HOLDER 706083 BRASS WALL OUTLET WITH COMBINED HANDSET

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of multistage centrifugal pumps with stainless steel impellers, intermediate chambers, shaft and outer sleeve. The Movitec VME models and VE/VSE models added May 2025 can also incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressures: Existing models: Comeo C models 10.0 bar, Movitec VM models with an oval flange or VME models with integral check valve 16.0 bar, All other Movitec VM models 25.0 bar. Models added May 2025: Movitec V/VS models with an oval flange or VE models with integral check valve 16.0 bar, All other Movitec V/VS models and Movitec HI/HSI models 25.0 bar. Maximum operating temperatures: Existing models: Comeo C and Movitec VME models with integral check valve 60°C, all other model variants 100°C. Models added May 2025: Movitec VE models with integral check valve 60°C, all other model variants 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250302718

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Movitec VM (-/F/E/V/T) 2/4/6 B: Oval flange: DN25, DN32. Round flange: DN25, DN32. External threaded: 1½” BSP (M), Victaulic: DN32 and Tri-clamp: DN32. Comeo C 2/4/6 B: 1¼” BSP (F) inlet x 1” BSP (F) outlet. Sizes added May 2025: Movitec V/VS (-/F/E/V/T) 2/4/6 B: Oval flange: DN25, DN32. Round flange: DN25, DN32. External threaded: 1½” BSP (M), Victaulic: DN32 and Tri-clamp: DN32. Movitec V/VS (-/F/E/V/T) 10 B/15 B/15 C: Oval flange: DN40, DN50. Round flange: DN40, DN50. External threaded: 1½” BSP (M), Victaulic: DN50 and Tri-clamp: DN50. Movitec V/VS F 25/40/60/90/125 B: Round flange: DN65, DN80, DN100, DN125. Movitec HI/HSI 2/4/6 B: 1¼” BSP or NPT (F). Movitec HI/HSI 10/15 B: 2” BSP or NPT (F).

Marking:

KSB logo, model name, PN, WRAS and technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/03/2030

Model:

Movitec VM (-/F/E/V/T) x yy B, Comeo C x yy B. Where: VM = Vertically oriented (AISI 304) with close coupled motor/ pump (pump/ motor shaft combined). No indication (VM only) = oval flange. F (VMF) = round flange. E (VME) = external tread. V (VMV) = Victaulic. T (VMT) = Triclamp. x = flow rate m³/h (2, 4 or 6). yy = no. of stages Movitec VM and Comeo C ranges 1-6 stages. Models added May 2025: Movitec V/VS (-/F/E/V/T) x yy B, Movitec V/VS (-/F/E/V/T) 15 yy C. Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. No indication (V/VS only) = oval flange. F (VF/VSF) = round flange. E (VE) = external thread. V (VV/VSV) = Victaulic. T (VT/VST) = Triclamp. x = flow rate m³/h (2, 4, 6, 10, 15). yy = no. of stages Movitec V/VS……2 B 1-30 stages. Movitec V/VS……4/6 B 1-26 stages. Movitec V/VS……10 B 1-21 stages. Movitec V/VS……15 B/C 1-17 stages. -------------------------------------- Movitec V/VS F xx yy B. Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. F (VF/VSF) = round flange. x = flow rate m³/h (25, 40, 60, 90 or 125). yy = no. of stages Movitec V/VS……25 B 1-12 stages. Movitec V/VS……40/60 B 1-10 stages. Movitec V/VS……90 B 1-6 stages. Movitec V/VS……125 B 1-4 stages. -------------------------------------- Movitec HI/HSI x yy B, Movitec HI/HSI 15 yy C. Where: H = Vertically oriented (AISI 304). HS = Vertically oriented (AISI 316). I = Inner thread connection. x = flow rate m³/h (2, 4, 6, 10 or 15). yy = no. of stages Movitec HI/HSI 2/4/6 B 1-14 stages. Movitec HI/HSI 10 B/15 B/15 C 1-8 stages.

Product Images

Approval Holder:

KSB Manufacturing B.V.

Company Name

KSB Manufacturing B.V.

Address

Kalkovenweg 13 2401LI Alphen Aan Den Rijn

Country

Netherlands

View All Listings by this Company

Range of multi-stage semiaxial submersible pumps with stainless steel bodies and impellers. Please note, this approval does not cover the motor, motor connection kit or power cable necessary for the pump to operate. Open outlet use only. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250504706

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

140 SX models: 3” GAS FLANGED outlet conenection, 180 SX models: 5” GAS FLANGED outlet conenection, 230 SX models: 6” GAS FLANGED outlet conenection, 270 SX models: DN200 FLANGED outlet conenection.

Marking:

Panelli logo, model type, serial no., made in Italy, production date (MM/YY) and other techical info on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/05/2030

Proviso:

Open outlet use only.

Model:

140 SX 34/XX, 140 SX 44/XX, 140 SX 54/XX, 140 SX 64/XX, 180 SX 102/ XX, 180 SX 124/XX, 180 SX 140/XX, 180 SX 78/XX, 180 SX 90/XX, 230 SX 200/XX (DRXX), 230 SX 220/XX (DRXX), 230 SX 240/XX (DRXX), 230 SX 280/XX (DRXX), 270 SX 370/XX (DRXX), 270 SX 440/XX (DRXX) (A). Where: 140-180-230-270 = pump diameter. 140: 6”, 180: 8”, 230: 10”, 270: 12”. SX: Semi-axial pump family. 34-440: Flow. /XX = Number of stages (XX will be replaced by 1 or 2 digits as follows). 140 SX 34: 3 to 27, 140 SX 44: 3 to 22, 140 SX 54: 3 to 22, 140 SX 64: 1 to 18, 180 SX 102: 1 to 15, 180 SX 124: 1 to 13, 180 SX 140: 1 to 12, 180 SX 78: 1 to 19, 180 SX 90: 1 to 17, 230 SX 200: 1 to 9, 230 SX 220: 1 to 7, 230 SX 240: 1 to 7, 230 SX 280: 1 to 7, 270 SX 370: 1 to 5, 270 SX 440: 1 to 5. Optional: DRXX = Impeller diameter reduction in mm. XX can either be 10 or 20. A = Impeller with corner reduction.

Approval Holder:

Panelli S.r.l.

Company Name

Panelli S.r.l.

Address

Via Rana 63/65 Z.I D5 Spinetta Marengo

View All Listings by this Company

Manufacturer:

Panelli S.r.l.

Company Name

Panelli S.r.l.

Address

Via Rana 63/65 Z.I D5 Spinetta Marengo

View All Listings by this Company

STORMBOOST range of domestic water pressure booster pumps with brass impellors, brass bodies with accumulators, available from 60 – 300 litres (please refer to model). Models are supplied with reducing bushes, pressure gauges, pressure reducing valves and double check valve assemblies housed in DZR brass bodies with isolation valves and strainers. Maximum working pressure 4.5 bar. Maximum operating temperature 23°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250508702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless-steel braided TPS lined flexible hose assemblies with 15mm push fit connections, for use with copper, PB and PEX pipe.

Marking:

Stuart Turner, model number and technical information on adhesive label on pump.

Installation Requirements:

R001 R009 R415

Expiry date:

31/05/2030

Model:

47714 STORMBOOST 60 with 60 litre accumulator, 47715 STORMBOOST 80 with 80 litre accumulator, 47716 STORMBOOST 100 with 100 litre accumulator, 47717 STORMBOOST 200 with 200 litre accumulator, 47718 STORMBOOST 300 with 300 litre accumulator.

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company