'Jindal Saw Limited Ordinary Portland Cement - 53 Grade'. Factory applied, grey coloured Ordinary Portland Cement. Mix cement, sand & water in a xx ratio of 1:1.5:0.5 and apply as per manufacturer's Work Instructions 'JSAW/AP01/DISP/PRO/WI-09', version '2.0', effective date '01.05.2023'. Cure for 2.5 hours@48°C and then 3 days@30°C. For use with water up to 60°C.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250155054

Expiry date:

31/01/2030

Approval Holder:

Jindal Saw Ltd. (AP01),

Company Name

Jindal Saw Ltd. (AP01),

Address

Haresamudram Village, Bommanahal Mondal, Anantapuram District, Andhra Pradesh - 515871

Country

India

View All Listings by this Company

'RAL 5005 Epoxy Coating'. Factory applied, blue coloured Epoxy Coating. Apply as per manufacturer's TDS '31.05.2024'. Cure for 10 minutes@200°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250155055

Expiry date:

31/01/2030

Approval Holder:

Micropul Boya Kimya San. Ve Tic. Ltd. Sti

Company Name

Micropul Boya Kimya San. Ve Tic. Ltd. Sti

Address

Balcik Mahallesi Mustafa Kemal Caddesi, 3273 Sokak, Gebze/Kocaeli

Country

Turkey

View All Listings by this Company

'LM-coat'. Factory applied, blue coloured, two-part Polyurea coating. Mix Part A (KOBECASE PS-6031) with Part B (COBENATE I-362) in a 100:100 volume ratio and apply as per manufacturer's TDS 'Rev. no: 02', dated '16.02.2022'. Cure for 4 hours@10°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

241255070

Expiry date:

31/12/2029

Approval Holder:

Meksis Mekanik Sistemleri Imalat Ve Muh

Company Name

Meksis Mekanik Sistemleri Imalat Ve Muh

Address

Aso 2 Sanayi Bolgesi 2009 Cadde, No:6 Sincan, Ankara

Country

Turkey

View All Listings by this Company

‘ResiGard APUA (NT) Coating'. Factory applied, grey coloured (once mixed), two-component coating. Mix and apply as per Technical Data Sheet ‘PDS/RG37/Ver15/01/25’. Cure for 1 minute@25°C. For use with water up to 85°C.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2106564

Expiry date:

30/06/2026

Approval Holder:

Conmix Ltd.

Company Name

Conmix Ltd.

Address

Dubai Industrial City (DIC)

Country

United Arab Emirates

View All Listings by this Company

'SikaTop®-107 Seal AE'. Site applied, grey coloured, two-part coating. Mix parts A and B in a 1.4 weight ratio and apply as per manufacturer's Method Statement 'V1', dated 'Feb 2025'. Cure Coat 1 for 3 hours at 30°C. Cure Coat 2 for 21 days at 30°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5038 Coatings, Paints & Linings

Section Subtitle:

Site applied concrete coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

250155062

Expiry date:

31/01/2030

Approval Holder:

Sika UAE L.L.C

Company Name

Sika UAE L.L.C

Address

P O Box 126212, Saih Shuaib 4 (533), Dubai Industrial City (DIC), Plot 61 (533-279), Dubai

Country

United Arab Emirates

Phone

+971 4 439 8200

General Email

sika.uae@ae.sika.com

View All Listings by this Company