'V-PET#1340QD-F GRAY'. Factory applied, grey coloured epoxy resin coating. Apply as per manufacturer's instructions '2211447-2' dated '2023/11/16'. Cure for 20 minutes@180°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

241155040

Expiry date:

30/11/2029

Approval Holder:

KUBOTA Corporation

Company Name

KUBOTA Corporation

Address

1-3, Kyobashi 2-chome, Chuo-ku Tokyo, 104-8307

Country

Japan

Phone

+81-90-2492-1627

View All Listings by this Company

'Hydroplate 1914'. Site applied, two-component, white coloured (once mixed and applied) Epoxy-polyamine coating. Mix parts A & B in a 3:1 weight ratio and apply as per manufacturer's Product Data Sheet 'B034', dated 'September 2024'. Cure coat 1 for 48 hours at 15°C. Cure coat 2 for 21 days at 15°C. For use with water up to 50°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

240855045

Expiry date:

31/08/2029

Approval Holder:

Carboline Norge AS

Company Name

Carboline Norge AS

Address

Husebysletta 9, 3414, Lierstranda

Country

Norway

View All Listings by this Company

'PE 7144 Plastic Sleeve'. Natural (appears white), injection moulded polyethylene component. For use with water up to 85°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

241055024

Expiry date:

31/10/2029

Approval Holder:

Ferroli Ltd

Company Name

Ferroli Ltd

Address

Lichfield Road, Branston Industrial Estate, Burton on Trent

Postcode

DE14 3HD

Country

Staffordshire

Phone

+44 870 7282882

General Email

technical@ferroli.co.uk

View All Listings by this Company

'EP701443C 'O' rings'. Black coloured, compression moulded EPDM 'O' rings. Shore hardness 70. Tested in-radius size 1.75mm. For use with water up to 85°C.

Section:

5360 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - components.

WRAS Approval Number:

240955030

Expiry date:

30/09/2029

Approval Holder:

Fannteer Corporation

Company Name

Fannteer Corporation

Address

2F, No. 77, Zhouzi Street, Neihu District, Taipei City 114680

Country

Taiwan

Phone

+886 2 2577 4691

General Email

info@fannteer.com.tw

View All Listings by this Company

'CERULEAN EP 14 (KIEP14)'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240755071

Expiry date:

31/07/2029

Approval Holder:

Industrial Spares Manufacturing and Trading Co.

Company Name

Industrial Spares Manufacturing and Trading Co.

Address

66 & 77, Functional Developed Plots, Perungudi, Chennai 600096

Country

India

View All Listings by this Company