Directory Search Results

Fittings Materials
Print List

#250302003

'ELS108'. Dual layered, extruded PVC hose incorporating EPDM washers. Maximum working pressure 10.0 Bar Cold water use only.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
250302003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4" BSP (captive nut) x 3/4" BSP (captive nut)
Marking:
ELSE, ELS108, Temperature, Pressure, and date of manufacture (DD/MM/YYYY) on hose body.
Installation Requirements:
R001 R008
Expiry date:
31/03/2030
Model:
ELS108
Product Images
Manufacturer:
EL-SE Kablo ve Plastik Sanayi A.S.
Company Name
EL-SE Kablo ve Plastik Sanayi A.S.
Address
Geposb 11. Cadde No. 13, PK. 41400 Gebze
Country
Turkey

View All Listings by this Company

Print This Approval

#250302005

Range of stainless steel braided, nylon braided, double locked (metal outer) or reinforced (see model), PEX/HTRPE lined flexible hose assemblies with EPDM washers and O rings. Available with a variety of finishes or end connections (see model). Maximum operating temperature 85°C.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
250302005
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only.
Size:
See model
Marking:
WRAS, YS and date of manufacture (YYMM) on ferrule.
Installation Requirements:
R001
Expiry date:
31/03/2030
Model:
2012 XX X DNX AxB LXXXX Where 2012 denotes the series name and hose lining: 20 = series name 12 = inner hose material: PEX/HTRPE Where the first two XX denotes the colour of the exterior hose and can be replaced by: GY = grey, YS = transparent, WH = white, BK = black, GO = golden, CP = chrome, BR = bronze, BN = nickel, Blank = stainless nature, RE = red, BL = blue, SS = stainless nature, ORB = oil rubbed bronze, AC = antique copper plated Where the third X denotes exterior hose and replaced by: T = reinforced hose, LL = nylon braided sheath, SS = stainless steel braided sheath, S = double lock hose Where DNX denotes the nominal diameter of inner hose and can be replaced by: DN4, DN6, DN8, DN10 Where A×B denotes the free combination of hose end connector and can be replaced by: T8 = (8mm Quick Release Spigot), T10 = (10mm Quick Release Spigot), T12 = (12mm Quick Release Spigot), T14 = (14mm Quick Release Spigot), T15 = (15mm Quick Release Spigot), T16 = (16mm Quick Release Spigot), T18 = (18mm Quick Release Spigot), M8 = (8mm Male M Thread), M10 = (10mm Male M Thread), M12 = (12mm Male M Thread), M14 = (14mm Male M Thread), M15 = (15mm Male M Thread), M16 = (16mm Male M Thread), M18 = (18mm Male M Thread), F1/2" = ½” BSP (F), M1/2" = ½” BSP (M), F3/8" = 3/8” BSP (F), M3/8" = 3/8” BSP (M), F3/4" = ¾” BSP (F), M3/4" = ¾” BSP (M), F7/16" = 7/16” BSP (F), M7/16" = 7/16” BSP (M), F9/16" = 9/16” BSP (F), M9/16" = 9/16” BSP (M), F11/16" = 11/16” BSP (F), M11/16" = 11/16” BSP (M). Where LXXXX denotes the length of hose and be replaced by anything between: L0200 (200mm) and L2500 (2500mm)
Product Images
Manufacturer:
Youshi (Xiamen) Sanitary Ware Industrial Co., Ltd.
Company Name
Youshi (Xiamen) Sanitary Ware Industrial Co., Ltd.
Address
41th Building, No.1777 Jilong Road, Tongan Industrial Zone (Huli), Xiamen, Fujian, 361100
Country
China

View All Listings by this Company

Print This Approval

#250312002

Stainless steel braided EPDM lined flexible hose assembly with EPDM washers. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
250312002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” captive nut end connections.
Marking:
PLUMB TECH (brand of ROYAL ALLIED BUILDING MATERIALS TRADING LLC), WRAS and year of manufacture (YYYY).
Installation Requirements:
R001
Expiry date:
31/03/2030
Model:
PT2500SSFL
Product Images
Manufacturer:
ROYAL ALLIED BUILDING MATERIALS TRADING LLC
Company Name
ROYAL ALLIED BUILDING MATERIALS TRADING LLC
Address
Warehouse no 51, Nasser rashid lootah warehouse, al quoz ind area 3 dubai UAE
Postcode
368277
Country
UAE
Phone
0086-13857821167

View All Listings by this Company

Print This Approval

#250302708

Range of indirect unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar @ 90˚C. The product is supplied with an inlet control group (safety kit) consisting of a pressure reducing valve pre-set at 3.0 bar, strainer, an expansion relief valve set at 6.0 bar and a check valve cartridge (verified by test - suitable for backflow protection against Fluid Category 2). A tundish and expansion vessel are also provided Maximum working pressure: Primary circuit: 6.0 Bar Secondary circuit: 5.5 bar Maximum operating temperature: 85.0°C

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Primary circuit: 1” BSP (F) Secondary circuit: 22mm compression
Marking:
Joule logo, model and technical information on adhesive label on body
Installation Requirements:
R001 R140 R360
Expiry date:
31/03/2030
Model:
TRJMVH -0150LFB 150 Cyclone Plus High Gain Indirect Standard TRJMVH -0180LFB 180 Cyclone Plus High Gain Indirect Standard TRJMVH -0210LFC 210 Cyclone Plus High Gain Indirect Standard TRJMVH -0250LFC 250 Cyclone Plus High Gain Indirect Standard TRJMVH -0300LFC 300 Cyclone Plus High Gain Indirect Standard TRJMVH -0150SFB 150 Cyclone Plus High Gain Indirect Slim TRJMVH -0180SFB 180 Cyclone Plus High Gain Indirect Slim TRJMVH -0210SFC 210 Cyclone Plus High Gain Indirect Slim
Product Images
Manufacturer:
Joule Hot Water Systems UK Ltd
Company Name
Joule Hot Water Systems UK Ltd
Address
Unit 3, Leftfield Park, Park Road Pontefract, West Yorkshire WF8 4PS

View All Listings by this Company

Print This Approval

#250304703

Range of 2, 3, 4, 5 or 6 port manifold assemblies with brass bodies. The products incorporate a spherical valve with a plastic ball on either the inlet or on each outlet (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 95°C

Section:
1950 Manifolds
Section Subtitle:
Metal.
WRAS Approval Number:
250304703
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Fastec® F13 internal Ø 20.75 - 20.93mm
Marking:
Teco logo, DN, PN, year and batch/month (YYMM) and F13 on body.
Installation Requirements:
R001
Expiry date:
31/03/2030
Model:
Manifold with valve on each outlet: DN2309727: DN10 Manifold 2 ways F13F, DN2105548: DN10 Manifold 3 ways F13F, DN1901798: DN10 Manifold 4 ways F13F, DN1901797: DN10 Manifold 5 ways F13F, DN2309733: DN10 Manifold 6 ways F13F, Manifold with valve on inlet: DN2410745: DN15 Manifold 4 ways F13F, DN1901854: DN15 Manifold 5 ways F13F.
Product Images
Manufacturer:
TECO Srl
Company Name
TECO Srl
Address
Via Sandro Pertini n.39/41 25050 Provaglio d'Iseo (BS)
Country
Italy

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 2019 of 2293

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.