Threaded adapter with plastic body. Maximum working pressure 12.5 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

Size:

3/8” BSP female to ¾” BSP male.

Marking:

JWL, model and size on body.

Installation Requirements:

R001 R008

Expiry date:

30/11/2028

Model:

DSPO006M

Approval Holder:

Becktech Limited

Company Name

Becktech Limited

Address

Terminus Road Chichester West Sussex

Postcode

PO19 8DW

Country

United Kingdom

Phone

01243 523130

General Email

rob@becktech.co.uk

View All Listings by this Company

Range of circulation pumps with a stainless steel body, plastic impeller and a silicone ‘O’-ring. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2310317

Size:

½” BSP (F).

Marking:

GREENPRO (registered trademark of Zhejiang Wigo Intelligence Pump Co., Ltd.), type, pressure, WRAS and other technical information on adhesive label on pump face. Flow arrow on body

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

RS12/1.2EM. RS12/1.2EMB.

Approval Holder:

Zhejiang Wigo Intelligence Pump Co., Ltd.

Company Name

Zhejiang Wigo Intelligence Pump Co., Ltd.

Address

No. 2 Shengda Road, Zeguo Town, Wenling Town, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Wigo Intelligence Pump Co., Ltd.

Company Name

Zhejiang Wigo Intelligence Pump Co., Ltd.

Address

No. 2 Shengda Road, Zeguo Town, Wenling Town, Zhejiang

Country

China

View All Listings by this Company

Range of multistage centrifugal pumps, with stainless steel bodies (CRN models) or black coloured cataphoretic electrodeposition coated cast iron bodies (CR models), stainless steel sleeve and impellers. The products can be supplied with or without a sensor. Maximum working pressures (no. of stages in brackets): CR/CRN 95 (1-5): 16.0 bar. CR/CRN 95 (6-8): 25.0 bar. CRN 95 (9-12): 40.0 bar. CR/CRN 125 (1-4): 16.0 bar. CR 125 (5): 25.0 bar. CRN 125 (6-7): 25.0 bar. CRN 125 (8-12): 40.0 bar. CR 155 (1-4): 16.0 bar. CRN 155 (1-4): 16.0 bar. CRN 155 (5-6): 25.0 bar. CRN 155 (7-11): 40.0 bar. CR/CRN 185 (1-3): 16.0 bar. CR/CRN 185 (4-5): 25.0 bar. CR/CRN 185 (6-8): 40.0 bar. CR/CRN 215 (1-3): 16.0 bar. CR/CRN 215 (4-5): 25.0 bar. CR/CRN 215 (6-7): 40.0 bar. CR/CRN 255 (1-3): 16.0 bar. CR/CRN 255 (3-4): 25.0 bar. CR/CRN 255 (5-6): 40.0 bar. When a sensor is incorporated the maximum working pressure is as follows: 25.0 bar with either the IPS44 or VTU sensor, (unless they are used on a pump with a maximum working pressure of 16.0 bar, in this instance the lesser pressure applies). The MBS3000 sensor can be used on all models, the pump maximum working pressure applies. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2310916

Size:

CR/CRN(E) 95 models: DN100 inlets/outlets, CR/CRN(E) 125 & CR/CRN(E) 155 models: DN150 inlets/outlets, CR/CRN(E) 185, CR/CRN(E) 215 & CR/CRN(E) 255 models: DN200 inlets/outlets. CRN(E) 95 models: PJE 4” inlets/outlets, CRN(E) 125 & CRN(E) 155 models: PJE 6” inlets/outlets, CRN(E) 185, CRN(E) 215 & CRN(E) 255 models: PJE 8” inlets/outlets.

Marking:

Grundfos logo, type, model, Prod/Ver no., technical info and manufacturing/assembly country on data plate on motor stool.

Installation Requirements:

R001 R415

Expiry date:

31/10/2028

Model:

Model key code: CR/CRN (E) AA-B-C-D-E-F-G-XXXX Where: CR = Pump type and Cast Iron. CRN = Pump type and EN 1.4401. E = Preminum Electronically Controlled Motor (CR /CRN 95 -125 models only). AA: Flow rate [m³/h] - 95 / 125 / 155 / 185 / 215 / 255. B: Number of impellers – dependent on model (1-12). C: Number of reduced diameter impellers - 0 / 1 / 2 / 3 / 4. D: Code for pump version: A = Basic version, B = Oversize motor, E = Pump with certificate, G = E-pump without operating panel, H = Horizontal version, I = Different pressure rating, J = E-pump with a different maximum speed, L = Pump including Grundfos CUE and certificate, N = With sensor, O = Clean and dryed, P = Undersize motor, R = Belt driven pump, T = Trust handling device, V = Cascade function, X = Special version*, Z = Pump with bearing flange. E: Code for pipe connection: F = DIN flange, G = ANSI flange, J = JIS flange, N = Changed diameter of ports, P = PJE coupling (CRN models only). F: Code for materials: A = Basic version, C = Carbon-free pump, H = Flanges and base plate EN 1.4408, L = Motor stool, base plate and flanges EN 1.4408, N = Flanges EN 1.4408, P = PEEK neck ring, Q = Silicon carbide/silicon carbide bearing in pump and silicon carbide/silicon carbide seal faces in thrust handling device, R = Silicone carbide /silicone carbide bearing, T = Baseplate EN 1.4408, U = Silicon carbide/silicon carbide bearing in pump and silicon carbide/tungsten carbide seal faces in thrust handling device, W = Tungsten carbide/tungsten carbide, X = Special*. G: Code for rubber parts: E = EPDM, V = FKM. XXXX: Code for shaft seal: HQQx, HUUx, HUBx, HQBx. Where: H = Balanced cartridge seal with O-ring B = Carbon, synthetic resin-impregnated U = Cemented tungsten carbide Q = Silicon carbide x can = E or V for rubber parts: E = EPDM, V = FKM. *Special version ONLY covers the situation where more than 4 options are selected within the same position.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of vertical multistage pumps with either stainless-steel bodies or cast-iron bodies with a black epoxy powder coating, stainless-steel impellers, shaft and outer sleeve, EPDM ‘O’-rings and a silicon carbide + EPDM shaft seal. Maximum working pressure 25.0 bar. Maximum operating temperature 90°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2311069

Size:

DN25 -100.

Marking:

Capari logo on metal cover plate on side of body. Flow arrow on body. Type, model, pressure and other information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2028

Model:

CVX AAB/CC-D/E Series: CVX. AA: Pump model size representing flow rate (m³/h) - 03, 05, 10, 15, 20, 32, 45, 64, 90. B: Pump generational code - 1. CC: No. of stages (model dependent - see below). D: Frequency - V = 50Hz or W = 50/60Hz. /G = cast iron base (CVX451/641/901 models only). Stainless steel bodies: CVX031: 5 -36 stages. 691472 - CVX031/5-V (DN25), 691473 - CVX031/7-V (DN25), 691474 - CVX031/10-V (DN25), 691475 - CVX031/15-V (DN25), 691476 - CVX031/19-V (DN25), 691477 - CVX031/23-V (DN25), 691478 - CVX031/29-V (DN25), 691479 - CVX031/33-V (DN25), 691480 - CVX031/36-V (DN25). CVX051: 4-36 stages. 691482 - CVX051/4-V (DN25), 691483 - CVX051/5-V (DN25), 691484 - CVX051/8-V (DN25), 691485 - CVX051/10-V (DN25), 691486 - CVX051/13-V (DN25), 691487 - CVX051/16-V (DN25), 691488 - CVX051/20-V (DN25), 691489 - CVX051/24-V (DN25), 691490 - CVX051/29-V (DN25), 691491 - CVX051/36-V (DN25). CVX101: 3-22 stages. 691493 - CVX101/3-V (DN40), 691494 - CVX101/4-V (DN40), 691495 - CVX101/6-V (DN40), 691496 - CVX101/9-V (DN40), 691497 - CVX101/12-V (DN40), 691498 - CVX101/16-V (DN40), 691499 - CVX101/22-V (DN40). CVX151: 2-17 stages. 691501 - CVX151/2-V (DN50), 691502 - CVX151/3-V (DN50), 691503 - CVX151/5-V (DN50), 691504 - CVX151/7-V (DN50), 691505 - CVX151/9-V (DN50), 691506 - CVX151/12-W (DN50), 691507 - CVX151/14-V (DN50), 691508 - CVX151/17-V (DN50). CVX201: 2-17 stages. 691510 - CVX201/2-V (DN50), 691511 - CVX201/3-V (DN50), 691512 - CVX201/5-V (DN50), 691513 - CVX201/7-V (DN50), 691514 - CVX201/10-W (DN50), 691515 - CVX201/14-V (DN50), 691516 - CVX201/17-V (DN50). CVX321: 2-14 stages. 691518 - CVX321/2-V (DN65), 691519 - CVX321/3-V (DN65), 691520 - CVX321/4-V (DN65), 691521 - CVX321/6-W (DN65), 691522 - CVX321/8-V (DN65), 691523 - CVX321/10-V (DN65), 691524 - CVX321/12-V (DN65), 691525 - CVX321/14-V (DN65). Cast iron bodies: CVX451: 2-13 stages. 691533 - CVX451/2-V/G (DN80), 691534 - CVX451/3-V/G (DN80), 691535 - CVX451/4-V/G (DN80), 691536 - CVX451/5-2-V/G (DN80), 691537 - CVX451/6-2-V/G (DN80), 691872 - CVX451/6-V/G (DN80), 691538 - CVX451/9-2-V/G (DN80), 691873 - CVX451/10-V/G (DN80), 691874 - CVX451/13-2-V/G (DN80). CVX641: 2-8 stages. 691539 - CVX641/2-V/G (DN100), 691540 - CVX641/3-1-V/G (DN100), 691541 - CVX641/4-V/G (DN100), 691875 - CVX641/4-2-V/G (DN100), 691542 - CVX641/6-2-V/G (DN100), 691543 - CVX641/7-1-V/G (DN100), 691876 - CVX641/8-1-V/G (DN100). CVX901: 2-6 stages. 691544 - CVX901/2-V/G (DN100), 691545 - CVX901/3-V/G (DN100), 691877 - CVX901/3-2-V/G (DN100), 691546 - CVX901/4-V/G (DN100), 691547 - CVX901/5-V/G (DN100), 691878 - CVX901/6-V/G (DN100).

Approval Holder:

Caprari S.p.A

Company Name

Caprari S.p.A

Address

Via Emilia, Ovest 900, 41123 Modena

Country

Italy

View All Listings by this Company

Range of overhead shower outlets with (chromium plated - brass bodies). The inlets incorporate a stainless-steel strainer and flow regulator. Model FLS-8120 Incorporates a shower arm.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2310055

Note:

Open outlet use only.

Size:

½” BSP F ½” BSP M Stainless Steel Braided PEX lined hose ½” BSP captive nut

Marking:

TAIZHOU FUMANLI SANITARY WARE CO.,LTD. on shower face.

Installation Requirements:

R001 R040

Expiry date:

31/10/2028

Model:

FLS-8001C-200 FLS-8001C-250 FLS-8001C-300 FLS-8007C-200 FLS-8007C-250 FLS-8007C-300 FLS-8117C-200 FLS-8117C-250 FLS-8117C-300 FLS-8002C-200 FLS-8002C-250 FLS-8002C-300 FLS-8008C-200 FLS-8008C-250 FLS-8008C-300 FLS-8120 FLS-8108 FLS-8108A

Approval Holder:

TAIZHOU FUMANLI SANITARY WARE CO.,LTD.

Company Name

TAIZHOU FUMANLI SANITARY WARE CO.,LTD.

Address

Pengjie Industrial Zone, Luqiao, Taizhou 318057, China

View All Listings by this Company