Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #240288022

Filling loop assembly consisting of an in-line isolation valve, an in-line double check valve assembly (suitable for back flow protection against fluid category 3) that incorporates an isolation valve and a stainless-steel braided EPDM lined hose. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1015 Filling Loop
Size:: 15mm compression
Marking:: Altecnic logo, flow arrow and CR on valve. Altecnic, WRAS and date of manufacture (YYYY) on hose.
Installation Requirements:: R001
Expiry date:: 28/02/2029
Model:: FL015 - 15nb CORE Filling Loop.

Approval Holder:: Smith Brothers Stores Limited

Company Name
Smith Brothers Stores Limited
Address
Unit V2 Winchester Avenue, Blaby, Leicester
Postcode
LE8 4GZ
Phone
0116 222 7330
General Email
kel.phillips@sbs.co.uk

View All Listings by this Company
Manufacturer:: Altecnic Limited

Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company
Manufacturer:: Altecnic Limited

Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company

WRAS Approval Number: #250604033

Range of stainless-steel(SS304L) press fittings with EPDM ‘O’-rings for use with stainless-steel pipe to EN10312. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250604033
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: MTF, model number, Size on fitting
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Coupling GDC5001 OD15 GDC5002 OD18 GDC5003 OD22 GDC5004 OD28 GDC5005 OD35 GDC5006 OD42 GDC5007 OD54 GDC6501 OD66.7 GDC5008 OD76.1 GDC5009 OD88.9 GDC5010 OD108 Long Coupling GDC5011 OD15 GDC5012 OD18 GDC5013 OD22 GDC5014 OD28 GDC5015 OD35 GDC5016 OD42 GDC5017 OD54 GDC6502 OD66.7 GDC5018 OD76.1 GDC5019 OD88.9 GDC5020 OD108 Reducer with Plain End GDC5021 OD18×OD15 GDC5022 OD22×OD15 GDC5023 OD22×OD18 GDC5024 OD28×OD15 GDC5025 OD28×OD18 GDC5026 OD28×OD22 GDC5048 OD35×OD15 GDC5027 OD35×OD18 GDC5029 OD35×OD22 GDC5030 OD35×OD28 GDC5031 OD42×OD15 GDC5032 OD42×OD18 GDC5033 OD42×OD22 GDC5034 OD42×OD28 GDC5035 OD42×OD35 GDC5036 OD54×OD15 GDC5037 OD54×OD18 GDC5038 OD54×OD22 GDC5039 OD54×OD28 GDC5040 OD54×OD35 GDC5041 OD54×OD42 GDC6503 OD66.7×OD42 GDC6504 OD66.7×OD54 GDC5028 OD76.1×OD42 GDC5042 OD76.1×OD54 GDC6505 OD76.1×OD66.7 GDC5049 OD88.9×OD42 GDC5043 OD88.9×OD54 GDC6506 OD88.9×OD66.7 GDC5044 OD88.9×OD76.1 GDC5045 OD108×OD54 GDC6507 OD108×OD66.7 GDC5046 OD108×OD76.1 GDC5047 OD108×OD88.9 90° Elbow GDC6051 OD15 GDC6052 OD18 GDC6053 OD22 GDC6054 OD28 GDC6055 OD35 GDC6056 OD42 GDC6057 OD54 GDC6511 OD66.7 GDC6058 OD76.1 GDC6059 OD88.9 GDC6060 OD108 90° Elbow with Plain End GDC6071 OD15 GDC6072 OD18 GDC6073 OD22 GDC6074 OD28 GDC6075 OD35 GDC6076 OD42 GDC6077 OD54 GDC6512 OD66.7 GDC6078 OD76.1 GDC6079 OD88.9 GDC6080 OD108 45° Elbow GDC6101 OD15 GDC6102 OD18 GDC6103 OD22 GDC6104 OD28 GDC6105 OD35 GDC6106 OD42 GDC6107 OD54 GDC6513 OD66.7 GDC6108 OD76.1 GDC6109 OD88.9 GDC6110 OD108 45° Elbow with Plain End GDC6121 OD15 GDC6122 OD18 GDC6123 OD22 GDC6124 OD28 GDC6125 OD35 GDC6126 OD42 GDC6127 OD54 GDC6514 OD66.7 GDC6128 OD76.1 GDC6129 OD88.9 GDC6130 OD108 Tee GDC5181 OD15 GDC5182 OD18 GDC5183 OD22 GDC5184 OD28 GDC5185 OD35 GDC5186 OD42 GDC5187 OD54 GDC6515 OD66.7 GDC5188 OD76.1 GDC5189 OD88.9 GDC5190 OD108 Reducing Tee GDC5191 OD18×OD15 GDC5192 OD22×OD15 GDC5193 OD22×OD18 GDC5194 OD28×OD15 GDC5195 OD28×OD18 GDC5196 OD28×OD22 GDC5197 OD35×OD15 GDC5198 OD35×OD18 GDC5199 OD35×OD22 GDC5200 OD35×OD28 GDC5201 OD42×OD15 GDC5202 OD42×OD18 GDC5203 OD42×OD22 GDC5204 OD42×OD28 GDC5205 OD42×OD35 GDC5206 OD54×OD15 GDC5207 OD54×OD18 GDC5208 OD54×OD22 GDC5209 OD54×OD28 GDC5210 OD54×OD35 GDC5211 OD54×OD42 GDC6517 OD66.7×OD22 GDC6518 OD66.7×OD28 GDC6519 OD66.7×OD35 GDC6520 OD66.7×OD42 GDC6521 OD66.7×OD54 GDC5212 OD76.1×OD22 GDC5213 OD76.1×OD28 GDC5214 OD76.1×OD35 GDC5215 OD76.1×OD42 GDC5216 OD76.1×OD54 GDC6522 OD76.1×OD66.7 GDC5217 OD88.9×OD22 GDC5218 OD88.9×OD28 GDC5219 OD88.9×OD35 GDC5220 OD88.9×OD42 GDC5221 OD88.9×OD54 GDC6523 OD88.9×OD66.7 GDC5222 OD88.9×OD76.1 GDC5223 OD108×OD22 GDC5224 OD108×OD28 GDC5225 OD108×OD35 GDC5226 OD108×OD42 GDC5227 OD108×OD54 GDC6524 OD108×OD66.7 GDC5228 OD108×OD76.1 GDC5229 OD108×OD88.9 Tee with Male Thread End GDC5231 OD15×R1/2 GDC5232 OD18×R1/2 GDC5239 OD22×R1/2 GDC5233 OD22×R3/4 GDC5234 OD22×R1 GDC5240 OD28×R1/2 GDC5283 OD28×R3/4 GDC5235 OD28×R1 GDC5281 OD35×Rp3/4 GDC5236 OD35×Rp1 1/4 GDC5237 OD42×Rp1 1/2 GDC5282 OD54×Rp1/2 GDC5238 OD54×Rp2 Tee with Female Thread End GDC5241 OD15×Rp1/2 GDC5242 OD18×Rp1/2 GDC5243 OD18×Rp3/4 GDC5244 OD22×Rp1/2 GDC5245 OD22×Rp3/4 GDC5246 OD28×Rp1/2 GDC5247 OD28×Rp3/4 GDC5248 OD28×Rp1 GDC5249 OD35×Rp1/2 GDC5250 OD35×Rp3/4 GDC5262 OD35×Rp1 GDC5263 OD35×Rp1 1/4 GDC5251 OD42×Rp1/2 GDC5252 OD42×Rp3/4 GDC5264 OD42×Rp1 GDC5265 OD42×Rp1 1/2 GDC5253 OD54×Rp1/2 GDC5254 OD54×Rp3/4 GDC5266 OD54×Rp1 GDC5255 OD54×Rp2 GDC6531 OD66.7×Rp1/2 GDC6532 OD66.7×Rp3/4 GDC6533 OD66.7×Rp1 1/2 GDC5256 OD76.1×Rp3/4 GDC5257 OD76.1×Rp2 GDC5258 OD88.9×Rp3/4 GDC5259 OD88.9×Rp2 GDC5260 OD108×Rp3/4 GDC5261 OD108×Rp2 Adaptor with Male Thread End GDC5360 OD15×R3/8 GDC5361 OD15×R1/2 GDC5362 OD15×R3/4 GDC5363 OD18×R1/2 GDC5364 OD18×R3/4 GDC5365 OD22×R1/2 GDC5366 OD22×R3/4 GDC5367 OD22×R1 GDC5368 OD28×R3/4 GDC5369 OD28×R1 GDC5370 OD28×R1 1/4 GDC5371 OD35×R1 GDC5372 OD35×R1 1/4 GDC5373 OD35×R1 1/2 GDC5374 OD42×R1 1/4 GDC5375 OD42×R1 1/2 GDC5376 OD54×R1 1/2 GDC5377 OD54×R2 GDC6541 OD66.7×R2 1/2 GDC5378 OD76.1×R2 1/2 GDC5379 OD88.9×R3 GDC5380 OD108×R4 Adaptor with Female Thread End GDC5381 OD15×Rp1/2 GDC5382 OD15×Rp3/4 GDC5383 OD18×Rp1/2 GDC5384 OD18×Rp3/4 GDC5385 OD22×Rp1/2 GDC5386 OD22×Rp3/4 GDC5387 OD22×Rp1 GDC5388 OD28×Rp3/4 GDC5389 OD28×Rp1 GDC5390 OD28×Rp1 1/4 GDC5391 OD35×Rp1 GDC5392 OD35×Rp1 1/4 GDC5393 OD35×Rp1 1/2 GDC5394 OD42×Rp1 1/4 GDC5395 OD42×Rp1 1/2 GDC5396 OD54×Rp1 1/2 GDC5397 OD54×Rp2 GDC6542 OD66.7×Rp2 1/2 GDC5398 OD76.1×Rp2 1/2 GDC5399 OD88.9×Rp3 GDC5400 OD108×Rp4 Cap GDC5421 OD15 GDC5422 OD18 GDC5423 OD22 GDC5424 OD28 GDC5425 OD35 GDC5426 OD42 GDC5427 OD54 GDC6542 OD66.7 GDC5428 OD76.1 GDC5429 OD88.9 GDC5430 OD108 Adaptor with Union Nut GDC5341 OD15×G1/2 GDC5353 OD15×G3/4 GDC5342 OD18×G1/2 GDC5343 OD18×G3/4 GDC5345 OD22×G1 GDC5347 OD28×G1 GDC5348 OD28×G1 1/4 GDC5359 OD35×G1 1/4 GDC5350 OD35×G1 1/2 GDC5351 OD42×G1 3/4 GDC5346 OD42×G1 1/2 GDC5356 OD54×G2 GDC5352 OD54×G2 3/8 Adaptor with Union with Female thread GDC5451 OD15×Rp1/2 GDC5452 OD15×Rp3/4 GDC5453 OD18×Rp1/2 GDC5454 OD18×Rp3/4 GDC5455 OD22×Rp3/4 GDC5456 OD22×Rp1 GDC5457 OD28×Rp1 GDC5458 OD35×Rp1 1/4 GDC5459 OD42×Rp1 1/2 GDC5460 OD54×Rp2 Adaptor Union with Male Thread GDC5431 OD15×R1/2 GDC5432 OD15×R3/4 GDC5433 OD18×R1/2 GDC5434 OD18×R3/4 GDC5435 OD22×R1/2 GDC5436 OD22×R3/4 GDC5437 OD22×R1 GDC5438 OD28×R1 GDC5439 OD35×R1 1/4 GDC5440 OD42×R1 1/2 GDC5441 OD54×R2 Adaptor Union GDC5471 OD15 GDC5472 OD18 GDC5473 OD22 GDC5474 OD28 GDC5475 OD35 GDC5476 OD42 GDC5477 OD54 Flange with Pressing Socket GDC5301 OD15 GDC5302 OD18 GDC5303 OD22 GDC5304 OD28 GDC5305 OD35 GDC5306 OD42 GDC5307 OD54 GDC6536 OD66.7 GDC5308 OD76.1 GDC5309 OD88.9 GDC5310 OD108

Approval Holder:: Marla Tube Fittings Limited

Company Name
Marla Tube Fittings Limited
Address
Kinwarton Farm Road Alcester
Postcode
B49 6EH
Country
United Kingdom
Phone
01789 761207
General Email
graham.walker@marla.co.uk

View All Listings by this Company

WRAS Approval Number: #2304383

U Profile range of press fittings incorporating EPDM ‘O’-rings. For use with Mingshi (S-1-0509/10/11/12/17/13) PEX-AL-PEX pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2304383
Size:: 16-32mm. BSP threaded connections: ½” - 1½” (M) or (F).
Marking:: Fitting: Mingshi and size on body. Pipe: Mingshi, Mingshi logo, WRAS, size, length, temperature, pressure, date of manufacture (DD/MM/YYYY) and ISO standard on pipe.
Installation Requirements:: R001
Expiry date:: 30/04/2028
Model:: Straight: PS16X16 PS20X20 PS25X25 PS32X32 Reduced straight: PS20X16 PS25X16 PS25X20 PS32X16 PS32X20 PS32X25 Male straight: PS16X1/2M PS16X3/4M PS20X1/2M PS20X3/4M PS20x1M PS25x1/2M PS25X3/4M PS25X1M PS32x1/2M PS32X3/4M PS32X1M PS32x11/4M PS32x11/2M Female straight: PS16X1/2F PS16X3/4F PS16X1F PS20X1/2F PS20X3/4F PS20x1F PS25X1/2F PS25X3/4F PS25X1F PS32x1/2F PS32X3/4F PS32X1F PS32X11/4F PS32x11/2F Elbow: PL16X16 PL20X20 PL25x25 PL32X32 Male elbow: PL16X1/2M PL16X3/4M PL20X1/2M PL20X3/4M PL20x1M PL25X1/2M PL25X3/4M PL25X1M PL32x1/2M PL32x3/4M PL32X1M PL32x11/4M Female elbow: PL16X1/2F PL16X3/4F PL20X1/2F PL20X3/4F PL20x1F PS25X1/2F PS25X3/4F PS25X1F PL32x1/2F PS32X3/4F PS32X1F PL32x11/4F Wall plated elbow: PZL16X1/2F PZL16x3/4F PZL20X1/2F PZL20X3/4F Tee: PT16X16X16 PT20X20X20 PT25X25X25 PT32X32X32 Reduced tee: PT16X20X16 PT16X25X16 PT20X16X20 PT20X25X20 PT25X16X25 PT25X16X16 PT25X20X25 PT25X32X25 PT32X16X32 PT32X20X32 PT32X25X32 PT25x16x20 PT32x20x25 PT32x20x26 PT20X16X16 PT20X20X16 PT25X25X20 PT25X20X20 PT25x16x20 PT32x20x25 PT32x32x16 PT32x32x20 PT32x25x25 Male tee: PT16X1/2MX16 PT16x3/4Mx16 PT20X1/2MX20 PT20X3/4MX20 Female tee: PT16X1/2FX16 PT16X3/4FX16 PT20X1/2FX20 PT20X3/4FX20 PT20X1FX20 PT25X1/2FX25 PT25X3/4FX25 PT25X1FX25 32X1/2FX32 PT32X3/4FX32 PT32X1FX32 PT32X11/4FX32 Cap: PSE16 PSE20 PSE25 PSE32 Female union: PS16X1/2F-H PS16X3/4F-H PS20X1/2F-H PS20X3/4F-H PS25X1/2F-H PS25X3/4F-H PS25X1F-H PS32X1F-H Pipe: ALPEX162 ALPEX202 ALPEX252 ALPEX323

Approval Holder:: Pedarson LTD

Company Name
Pedarson LTD
Address
Unit 16 Martlesham Creek Ind Est Sandy Lane Woodbridge Suffolk
Postcode
IP12 4SD
Country
United Kingdom
Phone
01394384077

View All Listings by this Company

WRAS Approval Number: #240404078

Multipipe range of M type press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240404078
Size:: see models
Marking:: YS, size etched on body. (Note: For 66.7mm models it will be marked as 67mm)
Installation Requirements:: R001
Expiry date:: 30/04/2029
Model:: STRAIGHT COUPLING CxC: 42-87010 15mm pressfit coupling 42-87040 22mm pressfit coupling 42-87050 28mm pressfit coupling 42-87060 35mm pressfit coupling 42-87070 42mm pressfit coupling 42-87080 54mm pressfit coupling 42-87090 67mm pressfit coupling SLIP COUPLING C x C: 42-87110 15mm pressfit slip coupling 42-87140 22mm pressfit slip coupling 42-87150 28mm pressfit slip coupling 42-87160 35mm pressfit slip coupling 42-87170 42mm pressfit slip coupling 42-87180 54mm pressfit slip coupling 42-87190 67mm pressfit slip coupling REDUCING COUPLING C x C: 42-87141 22x15mm pressfit coupling reduced 42-87151 28x15mm pressfit coupling reduced 42-87154 28x22mm pressfit coupling reduced 42-87163 35x15mm pressfit coupling reduced 42-87164 35x22mm pressfit coupling reduced 42-87165 35x28mm pressfit coupling reduced 42-87173 42x15mm pressfit coupling reduced 42-87174 42x22mm pressfit coupling reduced 42-87175 42x28mm pressfit coupling reduced 42-87176 42x35mm pressfit coupling reduced 42-87183 54x15mm pressfit coupling reduced 42-87184 54x22mm pressfit coupling reduced 42-87185 54x28mm pressfit coupling reduced 42-87186 54x35mm pressfit coupling reduced 42-87187 54x42mm pressfit coupling reduced 42-87195 67x28mm pressfit coupling reduced 42-87196 67x35mm pressfit coupling reduced 42-87197 67x42mm pressfit coupling reduced 42-87198 67x54mm pressfit coupling reduced FITTING REDUCER F x C: 42-87041 22x15mm pressfit fitting reducer 42-87051 28x15mm pressfit fitting reducer 42-87054 28x22mm pressfit fitting reducer 42-87063 35x15mm pressfit fitting reducer 42-87064 35x22mm pressfit fitting reducer 42-87065 35x28mm pressfit fitting reducer 42-87073 42x15mm pressfit fitting reducer 42-87074 42x22mm pressfit fitting reducer 42-87075 42x28mm pressfit fitting reducer 42-87076 42x35mm pressfit fitting reducer 42-87083 54x15mm pressfit fitting reducer 42-87084 54x22mm pressfit fitting reducer 42-87085 54x28mm pressfit fitting reducer 42-87086 54x35mm pressfit fitting reducer 42-87087 54x42mm pressfit fitting reducer 42-87095 67x28mm pressfit fitting reducer 42-87096 67x35mm pressfit fitting reducer 42-87097 67x42mm pressfit fitting reducer 42-87098 67x54mm pressfit fitting reducer 90DEG ELBOW C x C: 42-83010 15mm pressfit elbow 42-83040 22mm pressfit elbow 42-83050 28mm pressfit elbow 42-83060 35mm pressfit elbow 42-83070 42mm pressfit elbow 42-83080 54mm pressfit elbow 42-83090 67mm pressfit elbow 90DEG STREET ELBOW F x C: 42-83110 15mm pressfit street elbow 42-83140 22mm pressfit street elbow 42-83150 28mm pressfit street elbow 42-83160 35mm pressfit street elbow 42-83170 42mm pressfit street elbow 42-83180 54mm pressfit street elbow 42-83190 67mm pressfit street elbow 45DEG ELBOW C x C: 42-83210 15mm pressfit obtuse elbow 42-83240 22mm pressfit obtuse elbow 42-83250 28mm pressfit obtuse elbow 42-83260 35mm pressfit obtuse elbow 42-83270 42mm pressfit obtuse elbow 42-83280 54mm pressfit obtuse elbow 42-83290 67mm pressfit obtuse elbow 45DEG STREET ELBOW F x C: 42-83310 15mm pressfit obtuse street elbow 42-83340 22mm pressfit obtuse street elbow 42-83350 35mm pressfit obtuse street elbow 42-83360 28mm pressfit obtuse street elbow 42-83370 42mm pressfit obtuse street elbow 42-83380 54mm pressfit obtuse street elbow 42-83390 54mm pressfit obtuse street elbow CAP C x C: 42-87210 15mm pressfit stop end 42-87240 22mm pressfit stop end 42-87250 28mm pressfit stop end 42-87260 35mm pressfit stop end 42-87270 42mm pressfit stop end 42-87280 54mm pressfit stop end 42-87290 67mm pressfit stop end EQUAL TEE C x C: 42-85010 15mm pressfit tee 42-85040 22mm pressfit tee 42-85050 28mm pressfit tee 42-85060 35mm pressfit tee 42-85070 42mm pressfit tee 42-85080 54mm pressfit tee 42-85090 67mm pressfit tee PART CROSSOVER F x C: 42-88010 15mm pressfit part crossover 42-88040 22mm pressfit part crossover CROSSOVER C x C: 42-89010 15mm pressfit full crossover 42-89040 22mm pressfit full crossover REDUCING TEE: 42-85242 22mm x 15mm x 15mm pressfit tee 42-85141 22mm x 22mm x 15mm pressfit tee 42-85544 28mm x 22mm x 22mm pressfit tee 42-85154 28mm x 28mm x 22mm pressfit tee 42-85524 28mm x 15mm x 22mm pressfit tee 42-85552 28mm x 28mm x 15mm pressfit tee 42-85644 35mm x 22mm x 22mm pressfit tee 42-85664 35mm x 35mm x 22mm pressfit tee 42-85665 35mm x 35mm x 28mm pressfit tee 42-85766 42mm x 35mm x 35mm pressfit tee 42-85224 15mm x 22mm x 15mm pressfit tee 42-85454 22mm x 28mm x 22mm pressfit tee 42-85424 22mm x 15mm x 22mm pressfit tee 42-85525 28mm x 15mm x 28mm pressfit tee 42-85545 28mm x 22mm x 28mm pressfit tee 42-85626 35mm x 15mm x 35mm pressfit tee 42-85646 35mm x 22mm x 35mm pressfit tee 42-85656 35mm x 28mm x 35mm pressfit tee 42-85727 42mm x 15mm x 42mm pressfit tee 42-85747 42mm x 22mm x 42mm pressfit tee 42-85757 42mm x 28mm x 42mm pressfit tee 42-85767 42mm x 35mm x 42mm pressfit tee 42-85828 54mm x 15mm x 54mm pressfit tee 42-85848 54mm x 22mm x 54mm pressfit tee 42-85858 54mm x 28mm x 54mm pressfit tee 42-85868 54mm x 35mm x 54mm pressfit tee 42-85878 54mm x 42mm x 54mm pressfit tee

Approval Holder:: Multipipe Ltd

Company Name
Multipipe Ltd
Address
Unit 12 Great Hayes Business Park Lower Burnham Road Chelmsford
Postcode
CM3 6SQ
Country
Chelmsford

View All Listings by this Company
Manufacturer:: Linhai Yongsheng Pipe Co., Ltd

Company Name
Linhai Yongsheng Pipe Co., Ltd
Address
NO 7-270 FENXI VILLAGE DUQIAO LINHAI
Country
Zhejiang
Phone
0086-576-85528969

View All Listings by this Company
Manufacturer:: Linhai Yongsheng Pipe Co., Ltd

Company Name
Linhai Yongsheng Pipe Co., Ltd
Address
NO 7-270 FENXI VILLAGE DUQIAO LINHAI
Country
Zhejiang
Phone
0086-576-85528969

View All Listings by this Company

WRAS Approval Number: #250615017

Range of stainless steel (SS304 or SS316L) press-fit fittings incorporating EPDM ‘O’-rings for use with *‐KJ600304 and *-KJ600316 stainless steel pipes. The "KJ6278" prefix models also incorporates an EPDM gasket on the union nut. Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250615017
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15 - 108mm. ½” - 3” BSP (M). ½” - 2” BSP (F).
Marking:: KONJOY, size, WRAS and material grade on fitting body. WRAS, KONJOY, size, material grade, EN10312 and date of manufacture (YYYY/MM) on pipe.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Adapter 90 with female thread: KJ625015005: 15×Rp½. KJ625018005: 18×Rp½. KJ625022075: 22×Rp¾. Adapter with female thread: KJ627115005: 15×Rp½. KJ627118005: 18×Rp½. KJ627122075: 22×Rp¾. KJ627128001: 28×Rp1. KJ627135125: 35×Rp1¼. KJ627142105: 42×Rp1½. KJ627154002: 54×Rp2. Bridge with plain ending: KJ608500018: 18. KJ608500022: 22. KJ608500028: 28. Cap: KJ621100015: 15. KJ621100018: 18. KJ621100022: 22. KJ621100028: 28. KJ621100035: 35. KJ621100042: 42. KJ621100054: 54. KJ621100076: 76.1. KJ621100089: 88.9. KJ621100108: 108. Elbow 45 with press ending: KJ604500015: 15. KJ604500018: 18. KJ604500015: 22. KJ604500028: 28. KJ604500035: 35. KJ604500042: 42. KJ604500054: 54. KJ604500076: 76.1. KJ604500089: 88.9. KJ604500108: 108. Elbow 45 with plain ending: KJ614500015: 15. KJ614500018: 18. KJ614500022: 22. KJ614500028: 28. KJ614500035: 35. KJ614500042: 4 KJ614500054: 54. KJ614500076: 76.1. KJ614500089: 88.9. KJ614500108 -108. Elbow 90 with press ending KJ609600015: 15. KJ609600018: 18. KJ609600022: 22. KJ609600028: 28. KJ609600035: 35. KJ609600042: 42. KJ609600054: 54. KJ609600067: 66.7. KJ609600076: 76.1. KJ609600089: 88.9. KJ609600108 -108. Elbow 90 with female thread: KJ623015005: 15×Rp½. KJ623018005: 18×Rp½. KJ623022075: 22×Rp¾. KJ623028001: 28×Rp1. KJ623035125 : 35×Rp1¼. KJ623042105: 42×Rp1½. KJ623054002: 54×Rp2. Elbow: 90 with: male thread: KJ624015005: 15×R½. KJ624018005: 18×R½. KJ624022075: 22×R¾ Elbow 90 with plain ending: KJ619100015: 15. KJ619100018: 18. KJ619100022: 22. KJ619100028: 28. KJ619100035: 35. KJ619100042: 42. KJ619100054: 54. KJ619100076: 76.1. KJ619100089: 88.9. KJ619100108: 108. Reducer coupling with plain ending: KJ624301815: 18×15. KJ624302218: 22×18. KJ624302818: 28×18. KJ624303522: 35×22. KJ624303528: 35×28. KJ624304222: 42×22. KJ624304228: 42×28. KJ624304235: 42×35. KJ624305428: 54×28. KJ624305435: 54×35. KJ624305442: 54×42. Reducer coupling with press ending: KJ624401815: 18×15. KJ624402215: 22×15. KJ624402218: 22×18. KJ624402815: 28×15. KJ624402818: 28×18. KJ624402822: 28×22. KJ624403515: 35×15. KJ624403518: 35×18. KJ624403522: 35×22. KJ624403528: 35×28. KJ624404215: 42×15. KJ624404218: 42×18. KJ624404222: 42×22. KJ624404228: 42×28. KJ624404235: 42×35. KJ624405415: 54×15. KJ624405418: 54×18. KJ624405422: 54×22. KJ624405428: 54×28. KJ624405435: 54×35. KJ624405442: 54×42. KJ624406735: 66.7×35. KJ624406754: 66.7×54. KJ624407654: 76.1×54. KJ624408954: 88.9×54. KJ624408976: 88.9×76.1. KJ624410854: 108×54. KJ624410876: 108×76.1. KJ624410889: 108×88.9. Reducer Tee with press ending: KJ613301815: 18×15×18. KJ613302215: 22×15×22. KJ613302218: 22×18×22. KJ613302815: 28×15×28. KJ613302818: 28×18×28. KJ613302822: 28×22×28. KJ613303522: 35×22×35. KJ613303528: 35×28×35. KJ613304222: 42×22×42. KJ613304228: 42×28×42. KJ613304235: 42×35×42. KJ613305422: 54×22×54. KJ613305428: 54×28×54. KJ613305435: 54×35×54. KJ613305442: 54×42×54. KJ613307642: 76.1×42×76.1. KJ613307654: 76.1×54×76.1. KJ613308954: 88.9×54×88.9 KJ613310854: 108×54×108. KJ613310876: 108×76.1×108. KJ613310889: 108×88.9×108 Equal coupling with press ending: KJ623700015: 15. KJ623700018: 18. KJ623700022: 22 KJ623700028: 28. KJ623700035: 35. KJ623700042: 42. KJ623700054: 54. KJ623700067: 66.7. KJ623700076: 76.1. KJ623700089: 88.9. KJ623700108: 108 Adapter with male thread: KJ627215005: 15×R½. KJ627218005: 18×R½. KJ627218075: 18×R¾. KJ627222005: 22×R½. KJ627222075: 22×R¾. KJ627228001: 28×R1. KJ627235125: 35×R1¼. KJ627242105: 42×R1½. KJ627254002: 54×R2. KJ627276205: 76.1×R2½. KJ627289003: 88.9×R3. Slip coupling with press ending: KJ627100015: 15. KJ627100018: 18. KJ627100022: 22. KJ627100028: 28. KJ627100035: 35. KJ627100042: 42 KJ627100054: 54. Tee with press ending: KJ613012015: 15. KJ613012018: 18. KJ613012022: 22. KJ613012028: 28. KJ613012035: 35. KJ613012042: 42. KJ613012054: 54. KJ613012076: 76.1. KJ613012089: 88.9. KJ613012108: 108. Tee with male thread: KJ613815005: 15×R½. KJ613818005: 18×R½. KJ613822005: 22×R½. KJ613822075: 22×R¾. KJ613828005: 28×R½. KJ613828075: 28×R¾. KJ613828001: 28×R1. KJ613835105: 35×R½. KJ613835125: 35×R1¼. KJ613842125: 42×R1¼. KJ613854105: 54×R1½. KJ613854002: 54×R2. Tee with female thread:: KJ613915005: 15×Rp½. KJ613918005: 18×Rp½. KJ613922005: 22×Rp½. KJ613922075: 22×Rp¾. KJ613928005: 28×R½. KJ613928075: 28×Rp¾. KJ613928001: 28×Rp1. KJ613935005: 35×Rp½. KJ613935125: 35×Rp1¼. KJ613942125: 42×Rp1¼. KJ613954105: 54×1½. KJ613954002: 54×Rp2. Adaptor with union nut: KJ627815005: 15×G½. KJ627818005: 18×G½. KJ627818075: 18×G¾. KJ627822005: 22×G½. KJ627822075: 22×G¾. KJ627822001: 22×G1. KJ627828001: 28×G1. KJ627835125: 35×G1¼. KJ627842175: 42×G1¾. KJ627854002: 54×G2. Stainless steel pipe (SS304 or SS316L): *‐KJ600304 (SS304) *-KJ600316 (SS316L) Where * = size in mm between 15 and 108 (in whole numbers: 15, 18, 22, 28, 35, 42, 54, 66.7, 76.1, 88.9, 108).

Approval Holder:: Wenzhou Konjoy Fluid Control Tech Co., Ltd.

Company Name
Wenzhou Konjoy Fluid Control Tech Co., Ltd.
Address
1st Floor, No. 222, Binhai Industrial Zone, 2nd Road, Xinghai Sub‐district, Longwan District, Wenzhou, Zhejiang
Country
China
Phone
0086‐577‐86896059
General Email
info@konjoy‐tech.com

View All Listings by this Company

WRAS Approval Number: #251202006

‘Numepress’ range of stainless-steel crimp fittings incorporating EPDM and ‘O’-rings for use with 'Numepress' stainless steel pipe. Connection is achieved via M profile press jaws. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251202006
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15, 18, 22, 28, 35, 42, 54, 76, 88, 108, 114, 139 and 168mm crimp. ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2” BSP (M or F – stated via model name). DN50 to DN150 Flanged.
Marking:: ISOTUBI SL LOGO, Numepress and size on fitting body. ISOTUBI, Numepress, size and product info on pipe.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: F01 Coupling from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F02 Slip Coupling from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F03 90Q Female-Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F04 90Q Male - Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F05 45Q Female-Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F06 45Q Female - Male Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F07 Female Angle Adapter from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F08 Male Angle Adapter from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F09 Female Elbow with Wall nut from 15 1/2" to 22 3/4" Material 1.4401/1.4404 & 1.4301/1.4307 F10 90Q Elbow with Plane Ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F11 Valve connector with swivel in stainless Steel from 15 1/2" to 76.121/2" Material 1.4401/1.4404 & 1.4301/1.4307 F12 Female tee threaded adaptor from 15 1/2" to 108 2" Material 1.4401/1.4404 & 1.4301/1.4307 F14 Reducer from 18-15 to 168.3-139.7 Material 1.4401/1.4404 & 1.4301/1.4307 F15 Reducing tee from 18-15 to 168.3-139.7 Material 1.4401/1.4404 & 1.4301/1.4307 F16 Equal Tee from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F17 Female adaptor from 15 3/ 8" to 88.9 3" Material 1.4401/1.4404 & 1.4301/1.4307 F18 M ale adaptor from 15 3/8" to 108 4" Material 1.4401/1.4404 & 1.4301/1.4307 F19 Flanges adaptor from 15 DN15 to 108 DN100 Material 1.4401/1.4404 & 1.4301/1.4307 F20 Pre-formed pipe bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F21 Plug from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F22 Air tuve Pipe Bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F23 Pipe Bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F24 3 Pieces adaptor from 15 to 60.3 Material 1.4401/1.4404 & 1.4301/1.4307 F25 Female -Female pipe bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F26 Female connector from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F27 Male connector from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F28 Press flanged adaptor from 54 DN50 to 168.3 DN150 Material 1.4401/1.4404 & 1.4301/1.4307 F30 Cross or reduced cross from 15-15-15-15 to 168.3-168.3-168.3-168 .3 Material 1.4401/1.4404 & 1.4301/1.4307 F33 45Q Male angle adaptor from 15 1/ 2" to 28 1" Material 1.4401/1.4404 & 1.4301/1.4307 F34 90Q Female angle adaptor 15 3/ 8" to 35 1 1/ 4" Material 1.4401/1.4404 & 1.4301/1.4307 F35 90Q Female angle adaptor with swivel nut from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F36 Male Tee threaded adaptor from 15 3/8" to 35 11/4" Material 1.4401/1.4404 & 1.4301/1.4307 F37 Male threaded cross from 15 1/2" to 108-4" Material 1.4401/1.4404 & 1.4301/1.4307 F38 Female threaded cross from 15 1/ 2" to 108 4" Material 1.4401/1.4404 & 1.4301/1.4307 F39 90Q Male angle adaptor from 15 3/8" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F41 Male union connector gas from 15 1/ 2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F42 Female Union connector gas from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F43 Grooved Transition from 3/4" to 2" Material 1.4401/1.4404 & 1.4301/1.4307 F44 Van Stone flange from 1/2" to 2" Material 1.4401/1.4404 & 1.4301/1.4307 F45 Union Gas Female threaded from 15 3/4" to 54 2"Material 1.4401/1.4404 & 1.4301/1.4307 F46 Straight union with press fitting on both ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F47 Half coupling from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F48 30Q Female-Female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F49 30Q Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F50 15Q Female-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F51 60Q Female-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F52 Flanges adaptor PN6 from 15 DN15 to 108 DN100 Material 1.4401/1.4404 & 1.4301/1.4307 F53 Pipe penetration from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F54 Male plug from 16 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F55 Weld Adaptor from 15 to 60.3 Material 1.4401/1.4404 & 1.4301/1.4307 F56 75Q Female -Female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F57 l0Q Female-Female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F58 60Q Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F59 lSQ Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F60 Slip coupling with female thread from DN15 1/ 2" to DN54 Material 1.4401/1.4404 & 1.4301/1.4307 F61 Transition for grooved coupling from DN28x33.7 to DN108x 11 4.3 Material 1.4401/1.4404 & 1.4301/1.4307 F63 7SQ Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F64 15Q Male -female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F65 Male-Female pipe penetration from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F66 30Q Male-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F72 45Q Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 Pipe 15 x 0.6 mm Material 1.4401/1.4404 Pipe 18 x 0.7 mm Material 1.4401/1.4404 Pipe 22 x 0.7 mm Material 1.4401/1.4404 Pipe 28 x 0.8 mm Material 1.4401/1.4404 Pipe 35 x 1 mm Material 1.4401/1.4404 Pipe 42 x 1.1 mm Material 1.4401/1.4404 Pipe 54 x 1.2 mm Material 1.4401/1.4404 Pipe 76.1 x 1.5 mm Material 1.4 401/ 1.4404 Pipe 15 x 1 mm Material 1.4401/1.4404 Pipe 18 x 1 mm Material 1.4401/1.4404 Pipe 22 x 1.2 mm Material 1.4401/1.4404 Pipe 28 x 1.2 mm Material 1.4401/1.4404 Pipe 35 x 1.5 mm Material 1.4401/1.4404 Pipe 42 x 1.5 mm Material 1.4401/1.4404 Pipe 54 x 1.5 mm Material 1.4401/1.4404 Pipe 76.1 x 2 mm Material 1.4401/1.4404 Pipe 88.9 x 2 mm Material 1.4401/1.4404 Pipe 114.3 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2.6 mm Material 1.4401/1.4404 Pipe 168.3 x 2 mm Material 1.4401/1.4404 Pipe 168.3 x 2.6 mm Material 1.4401/1.4404 Pipe 15 x 0.6 mm Material 1.4301/1.4307 Pipe 18 x 0.7 mm Material 1.4301/1.4307 Pipe 22 x 0.7 mm Material 1.4301/1.4307 Pipe 28 x 0.8 mm Material 1.4301/1.4307 Pipe 35 x 1 mm Material 1.4301/1.4307 Pipe 42 x 1.1 mm Material 1.4301/1.4307 Pipe 54 x 1 .2 mm, Material 1.4301/1.4307 Pipe 76.1 x 1.5 mm Material 1.4301/1.4307 Pipe 15 x 1 mm Material 1.4301/1.4307 Pipe 18 x 1 mm Material 1.4301/1.4307 Pipe 22 x 1. 2 mm Material 1.4301/1.4307 Pipe 28 x 1.2 mm Material 1.4301/1.4307 Pipe 35 x 1.5 mm Material 1.4301/1.4307 Pipe 42 x 1.5 mm Material 1.4301/1.4307 Pipe 54 x 1.5 mm Material 1.4301/1.4307 Pipe 76.1 x 2 mm Material 1.4301/1.4307 Pipe 88.9 x 2 mm Material 1.4301/1.4307 Pipe 108 x 2 mm Material 1.4301/1.4307 Pipe 114.3 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2.6 mm Material 1.4301/1 .4307 Pipe 168.3 x 2 mm Material 1.4301/1.4307 Pipe 168.3 x 2.6 mm Material 1.4301/1.4307

Product Images

Approval Holder:: ISOTUBI SL

Company Name
ISOTUBI SL
Address
Pol. Ind. Santa Rita c/ Mecànica 6 08755 Castellbisbal ( Bcn ) SPAIN
Country
Spain
General Email
xavi.armengou@isotubi.com

View All Listings by this Company
Manufacturer:: ISOTUBI SL

Company Name
ISOTUBI SL
Address
Pol. Ind. Santa Rita c/ Mecànica 6 08755 Castellbisbal ( Bcn ) SPAIN
Country
Spain
General Email
xavi.armengou@isotubi.com

View All Listings by this Company

WRAS Approval Number: #251012009

Range of copper press fittings with EPDM seals for use with copper pipe (manufactured to EN1057). Jointing is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251012009
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: Hengsheng logo (HS) and size on body.
Installation Requirements:: R001
Expiry date:: 31/10/2030
Model:: 6002 (Press 90° Bend C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6001 (Press 90° Bend FTG×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6041 (Press 45° Bend C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6040 (Press 45° Bend FTG×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6130 (Press Tee C×C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6130R (Press Reducing Tee C×C×C): 15mm×15mm×12mm, 22mm×22mm×15mm, 22mm×22mm×12mm, 22mm×15mm×15mm, 22mm×15mm×22mm, 28mm×28mm×22mm, 28mm×28mm×15mm, 28mm×15mm×22mm, 28mm×22mm×22mm, 28mm×15mm×28mm, 28mm×22mm×28mm, 35mm×35mm×28mm, 35mm×35mm×22mm, 35mm×35mm×15mm, 42mm×42mm×35mm, 42mm×42mm×28mm, 42mm×42mm×22mm, 42mm×42mm×15mm, 54mm×54mm×42mm, 54mm×54mm×35mm, 54mm×54mm×28mm, 54mm×54mm×22mm. 6301 (Press Cap): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6270 (Press Straight Coupling C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. J6270 (Press Slip Coupling C×C): 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6240 (Press Reducing Coupling C×C): 15mm×12mm, 22mm×15mm, 22mm×18mm, 28mm×22mm, 28mm×15mm, 35mm×28mm, 35mm×22mm, 42mm×35mm, 42mm×28mm, 42mm×22mm, 54mm×42mm, 54mm×35mm. 6243 (Press Fitting Reducer Ftg×C): 15mm×12mm, 22mm×15mm, 28mm×22mm, 28mm×15mm, 35mm×28mm, 35mm×22mm, 42mm×35mm, 42mm×28mm, 42mm×22mm, 54mm×42mm, 54mm×35mm, 54mm×28mm, 54mm×22mm.

Approval Holder:: Ningbo Hengsheng Pipe Fitting Co.,Ltd.

Company Name
Ningbo Hengsheng Pipe Fitting Co.,Ltd.
Address
No. 28, West Jinshui Road, Ninghai, Ningbo, Zhejiang
Country
China
Phone
0086-574-65338995
General Email
sales@hengshen.com

View All Listings by this Company

WRAS Approval Number: #250915008

‘HLBRxx’ range of brass or DZR brass compression fittings for use with copper pipe (manufactured to EN 1057). The HLBRTC‐1 tank connector, HLBRSS‐1 and HLBRBS‐1 tap connectors all incorporate an EPDM washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1140 Fittings for use with Tube and Pipe
Section Subtitle:: Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250915008
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model: 8-54mm, ¼” - 2” BSP (M) or (F).
Marking:: HL and size on nut or body. DZR brass fittings are also marked CR.
Installation Requirements:: R001
Expiry date:: 30/09/2030
Model:: HLBRRC‐1 Reducing Coupling 10mm x 8mm, HLBRRC‐1 Reducing Coupling 15mm x 8mm, HLBRRC‐1 Reducing Coupling 15mm x 10mm, HLBRRC‐1 Reducing Coupling 15mm x 12mm, HLBRRC‐1 Reducing Coupling 22mm x 15mm, HLBRRC‐1 Reducing Coupling 28mm x 15mm, HLBRRC‐1 Reducing Coupling 28mm x 22mm, HLBRSS‐1 Straight Swivel Tap Connector 15mm x 1/2", HLBRSS‐1 Straight Swivel Tap Connector 15mm x 3/4", HLBRSS‐1 Straight Swivel Tap Connector 22mm x 3/4", HLBRBS‐1 Bent Swivel Tap Connector 15mm x 1/2", HLBRBS‐1 Bent Swivel Tap Connector 22mm x 3/4", HLBRTC‐1 Tank Connector 15mm, HLBRTC‐1 Tank Connector 22mm, HLBRTC‐1 Tank Connector 28mm, HLBRTC‐1 Tank Connector 35mm, HLBRER‐1 Elbow Reducer 22mm x 15mm, HLBRFB‐1 Female Backplate Elbow 15mm x 1/2" female, HLBRFB‐1 Female Backplate Elbow 22mm x 3/4" female, HLBRCN‐1 Compression Nut 15mm, HLBRCN‐1 Compression Nut 22mm, HLBRCN‐1 Compression Nut 28mm, HLBRCC‐1 Compression Cap / Blank Nut 1/2", HLBRCB‐1 Compression Blank Capnut 22mm, HLBRRT‐1 Reducing Tee 15mm x 15mm x 22mm, HLBRRT‐1 Reducing Tee 22mm x 15mm x 15mm, HLBRRT‐1 Reducing Tee 22mm x 15mm x 22mm, HLBRRT‐1 Reducing Tee 22mm x 22mm x 15mm, HLBRRT‐1 Reducing Tee 22mm x 22mm x 28mm, HLBRRT‐1 Reducing Tee 28mm x 28mm x 15mm, HLBRRT‐1 Reducing Tee 28mm x 15mm x 28mm, HLBRRT‐1 Reducing Tee 28mm x 28mm x 22mm, HLBRFB‐2 Female Branch Tee 15mm x 15mm x 1/2", HLBRFB‐2 Female Branch Tee 22mm x 22mm x 1/2", HLBRFB‐2 Female Branch Tee 22mm x 22mm x 3/4", HLBRFB‐2 Female Branch Tee 28mm x 28mm x 1/2", HLBRFE‐2 Female End Tee 15mm x 1/2" x 15mm, HLBRRS‐1 Reducing Set (3 part) 15mm x 8mm, HLBRRS‐1 Reducing Set (3 part) 15mm x 10mm, HLBRRS‐1 Reducing Set (3 part) 22mm x 15mm, HLBRRS‐1 Reducing Set (3 part) 28mm x 15mm, HLBRRS‐1 Reducing Set (3 part) 28mm x 22mm, HLBRRS‐1 Reducing Set (3 part) 35mm x 22mm, HLBRTA‐1 Tap Adaptor Male x Female 1/2", HLBRBR‐1 Burst Repair Coupling 15mm x 15mm x 80mm, HLBRSC‐1 Straight Coupling 8mm, HLBRSC‐1 Straight Coupling 10mm, HLBRSC‐1 Straight Coupling 15mm, HLBRSC‐1 Straight Coupling 22mm, HLBRSC‐1 Straight Coupling 28mm, HLBRSC‐1 Straight Coupling 35mm, HLBRSC‐1 Straight Coupling 42mm, HLBRSC‐1 Straight Coupling 54mm, HLBRMC‐1 Male Coupling 8mm x 1/4" male, HLBRMC‐1 Male Coupling 10mm x 1/4" male, HLBRMC‐1 Male Coupling 10mm x 1/2" male, HLBRMC‐1 Male Coupling 10mm x 3/8" male, HLBRMC‐1 Male Coupling 15mm x 1/4" male, HLBRMC‐1 Male Coupling 15mm x 3/8" male, HLBRMC‐1 Male Coupling 15mm x 1/2" male, HLBRMC‐1 Male Coupling 15mm x 3/4" male, HLBRMC‐1 Male Coupling 22mm x 1/2" male, HLBRMC‐1 Male Coupling 22mm x 3/4" male, HLBRMC‐1 Male Coupling 22mm x 1" male, HLBRMC‐1 Male Coupling 28mm x 1" male, HLBRMC‐1 Male Coupling 28mm x 1.1/4" male, HLBRMC‐1 Male Coupling 35mm x 1.1/4" male, HLBRMC‐1 Male Coupling 42mm x 1. 1/2" male, HLBRMC‐1 Male Coupling 54mm x 2" male, HLBRFC‐1 Female Coupling 8mm x 1/4" female, HLBRFC‐1 Female Coupling 10mm x 1/4" female, HLBRFC‐1 Female Coupling 10mm x 3/8" female, HLBRFC‐1 Female Coupling 10mm x 1/2" female, HLBRFC‐1 Female Coupling 15mm x 1/2" female, HLBRFC‐1 Female Coupling 15mm x 3/8" female, HLBRFC‐1 Female Coupling 15mm x 3/4" female, HLBRFC‐1 Female Coupling 22mm x 1/2" female, HLBRFC‐1 Female Coupling 22mm x 3/4" female, HLBRFC‐1 Female Coupling 22mm x 1" female, HLBRFC‐1 Female Coupling 28mm x 1" female , HLBRFC‐1 Female Coupling 35mm x 1.1/4" female, HLBRFC‐1 Female Coupling 42mm x 1.1/2" female, HLBRFC‐1 Female Coupling 54mm x 2" female, HLBRSE‐1 Stop End 8mm, HLBRSE‐1 Stop End 10mm, HLBRSE‐1 Stop End 15mm, HLBRSE‐1 Stop End 22mm, HLBRSE‐1 Stop End 28mm, HLBRSE‐1 Stop End 35mm, HLBRSE‐1 Stop End 42mm, HLBRSE‐1 Stop End 54mm, HLBRIR‐1 Internal Reducer 15mm x 8mm, HLBRIR‐1 Internal Reducer 10mm x 8mm, HLBRIR‐1 Internal Reducer 15mm x 10mm, HLBRIR‐1 Internal Reducer 22mm x 15mm, HLBRIR‐1 Internal Reducer 28mm x 15mm, HLBRIR‐1 Internal Reducer 28mm x 22mm, HLBRE‐1 Elbow 8mm, HLBRE‐1 Elbow 10mm, HLBRE‐1 Elbow 15mm, HLBRE‐1 Elbow 22mm, HLBRE‐1 Elbow 28mm, HLBRE‐1 Elbow 35mm, HLBRE‐1 Elbow 42mm, HLBRME‐1 Male Elbow 15mm x 1/2" male, HLBRME‐1 Male Elbow 15mm x 3/4" male, HLBRME‐1 Male Elbow 22mm x 3/4" male, HLBRME‐1 Male Elbow 22mm x 1" male, HLBRME‐1 Male Elbow 28mm x 1" male, HLBRFE‐1 Female Elbow 15mm x 1/2" female, HLBRFE‐1 Female Elbow 15mm x 3/4" female, HLBRFE‐1 Female Elbow 22mm x 3/4" female, HLBRFE‐1 Female Elbow 22mm x 1" female, HLBRFE‐1 Female Elbow 28mm x 1" female, HLBRET‐1 Equal Tee 8mm, HLBRET‐1 Equal Tee 10mm, HLBRET‐1 Equal Tee 15mm, HLBRET‐1 Equal Tee 22mm, HLBRET‐1 Equal Tee 28mm, HLBRET‐1 Equal Tee 35mm, HLBRET‐1 Equal Tee 42mm, HLBRET‐1 Equal Tee 54mm.

Approval Holder:: Zhejiang Hailiang Co., Ltd

Company Name
Zhejiang Hailiang Co., Ltd
Address
Diankou Zhuji Zhejiang
Country
China

View All Listings by this Company
Manufacturer:: Zhejiang Hailiang Co., Ltd

Company Name
Zhejiang Hailiang Co., Ltd
Address
Diankou Zhuji Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #250915009

‘3600xx’ range of brass compression fittings for use with copper pipe (manufactured to EN 1057). The 360014 tank connector, 360013 and 360017 tap connectors all incorporate an EPDM washer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1140 Fittings for use with Tube and Pipe
Section Subtitle:: Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250915009
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model: 6-54mm, ¼” - 2” BSP (M) or (F).
Marking:: TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD. logo and size on compression nut.
Installation Requirements:: R001
Expiry date:: 30/09/2030
Model:: 360003 Compression Straight Connector: 6mm - 54mm, 360004 Compression Reducing Coupler: 10mmx8mm - 28mmx22mm, 360001 Compression Male Coupler: 6mmx1/4" - 54mmx2", 360002 Compression Female Coupler: 6mmx1/4" - 54mmx2", 360013 Compression Straight Tap Connector: 15mmx1/2"- 22mmx3/4", 360014 Compression Tank Connector with Seal: 15mm - 54mm 360015 Compression End Cap Connector: 6mm - 54mm, 360007 Compression Elbow Coupler: 8mm - 54mm, 360016 Compression Elbow Reducing Connector: 22mmx15mm, 360017 Compression Bent Tap Connector: 15mmx1/2"- 22mmx3/4", 360006 Compression Female Elbow Connector: 8mmx1/4" - 54mmx2", 360009 Compression Wall Plate Elbow Coupler: 15mmx1/2" - 22mmx3/4", 360005 Compression Male Elbow Coupler: 8mmx1/4" - 54mmx2", 360008 Compression Equal Tee Coupler: 8mm - 54mm, 360018 Compression Reducing Tee Coupler: 15mmx15mmx22mm - 28mmx28mmx22mm, 360010 Compression Female Tee Coupler: 15mmx15mmx1/2" - 28mmx28mmx1/2".

Approval Holder:: TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Company Name
TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.
Address
No.3, Jinhai Road, Bin'gang Industry Zone, Ganjiang Town, Yuhuan, Zhejiang Province, 317610
Country
China

View All Listings by this Company
Manufacturer:: TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Company Name
TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.
Address
No.3, Jinhai Road, Bin'gang Industry Zone, Ganjiang Town, Yuhuan, Zhejiang Province, 317610
Country
China

View All Listings by this Company

WRAS Approval Number: #240404724

"PRESSTITE" range of press fittings with nickel plated brass bodies incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved by a TH crimping profile. For above ground use only. Maximum working pressure 10.0 bar. 20 & 26mm pressfit sizes cold water use only. Threaded and pressfit 16mm size maximum operating temperature 95°C. From June 2025: The 20 & 26mm pressfit sizes maximum operating temperature 95°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240404724
Size:: Pressfit: 16, 20 & 26mm. Threaded: ½”, ¾” & 1” BSP (M)/(F) or captive nut.
Marking:: IDC logo: E mark (~E~ within circle), profile type (TH), size and PN on fitting body.
Installation Requirements:: R001
Expiry date:: 30/04/2029
Model:: Straight PEX x PEX (press x press): 900310002 - 16mm x 16mm 900310003 - 20mm x 20mm 900310004 - 26mm x 26mm Reduce Straight PEX x PEX (press x press): 900310032 - 20mm x 16mm 900310042 - 26mm x 16mm 900310043 - 26mm x 20mm Straight PEX x Female (press x female): 900312003 - 20mm x 1/2"F 900312004 - 26mm x 3/4"F 900312023 - 16mm x 1/2"F 900312034 - 20mm x 3/4"F 900312045 - 26mm x 1"F Stop end (press): 900372002 - 16mm 900372003 - 20mm 900372004 - 26mm Elbow (press): 900315002 - 16mm 900315003 - 20mm 900315004 - 26mm Elbow PEX x Male (press x male): 900316023 - 16mm x 1/2"M 900316003 - 20mm x 1/2"M 900316034 - 20mm x 3/4"M 900316004 - 26mm x 3/4"M Elbow PEX x Female (press x female): 900317023 - 16mm x 1/2"F 900317003 - 20mm x 1/2"F 900317034 - 20mm x 3/4"F 900317004 - 26mm x 3/4"F Wall Plate PEX x Female (press x female): 900307023 - 16 x 1/2"F 900307003 - 20 x 1/2"F 900307034 - 20 x 3/4"F 900307004 - 26 x 3/4"F Equal Tee (press): 900318002 - 16mm 900318003 - 20mm 900318004 - 26mm Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): 900318232 - 16 x 20 x 16 900318322 - 20 x 16 x 16 900318323 - 20 x 16 x 20 900318332 - 20 x 20 x 16 900318343 - 20 x 26 x 20 900318422 - 26 x 16 x 16 900318423 - 26 x 16 x 20 900318424 - 26 x 16 x 26 900318432 - 26 x 20 x 16 900318433 - 26 x 20 x 20 900318434 - 26 x 20 x 26 900318442 - 26 x 26 x 16 900318443 - 26 x 26 x 20 900318454 - 26 x 32 x 26 Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): 900330004 - 26 x 3/4"F x 20 900330023 - 16 x 1/2"F x 16 900330033 - 20 x 1/2"F x 20 900330034 - 20 x 3/4"F x 20 900330043 - 26 x 1/2"F x 26

Approval Holder:: Hevac Ltd

Company Name
Hevac Ltd
Address
Muirfield Drive Naas Road Dublin 12
Postcode
D12 X0A3
Country
Ireland
Phone
0035 314 191924
General Email
dave.grenville@hevac.ie

View All Listings by this Company
Manufacturer:: IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company
Manufacturer:: IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company