Directory Search Results

Print List

#2106027

Range of gate valves with brass bodies, brass wedges and PTFE packing glands. The valves are operated via a non-rising spindle with a hand wheel operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
2106027
Marking:
ITAP logo (‘i’ within a box), DN, PN and size on body.
Installation Requirements:
R001
Expiry date:
30/06/2026
Model:
1560012 - ½” BSP (F) (DN15), 1560034 - ¾” BSP (F) (DN20), 1560100 - 1” BSP (F) (DN25), 1560114 - 1 ¼” BSP (F) (DN32), 1560112 - 1 ½” BSP (F) (DN40), 1560200 - 2” BSP (F) (DN50), 1560212 - 2 ½” BSP (F) (DN65). Models added January 2022: 1560300 - 3” BSP (F) (DN80), 1560400 - 4” BSP (F) (DN100).

Approval Holder:
Itap Spa
Company Name
Itap Spa
Address
Via Ruca 19. 25065 Lumezzane (BS), Italy
Postcode
25065
Phone
+39 030 89270
General Email
info@itap.it

View All Listings by this Company

Print This Approval


#2110005

Range of cold water inlet control groups with DZR brass bodies, consisting of a pressure reducing valve, (all models are adjustable between 1.0 and 6.0 bar, but some come pre-set from the factory - see model), a pressure relief valve (set at 6.0 or 8.0 bar - see model) and a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The pressure relief valve is fitted with a rotary type easing gear. All products for use with copper pipe manufactured to BS EN 1057. Maximum inlet supply pressure 20.0 bar. Cold water use only.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2110005
Size:
28mm compression inlet/outlet
Marking:
RWC, SYR, DR and flow arrow on body. RELIANCE WATER CONTROLS and pressure on cap.
Installation Requirements:
R001 R120
Expiry date:
31/10/2026
Model:
CWIC352300, CWIC352301, CWIC352302, CWIC352306, CWIC352310 CWIC352300 (pressure reducing valve pre-set at 3.5 bar, pressure relief valve is set at 6.0 bar). CWIC352301 (pressure reducing valve pre-set at 1.0 bar, pressure relief valve is set at 6.0 bar). CWIC352302 (pressure reducing valve pre-set at 3.5 bar, pressure relief valve is set at 6.0 bar). CWIC352303 (pressure reducing valve pre-set at 3.5 bar, pressure relief valve is set at 8.0 bar). CWIC352306 (pressure reducing valve pre-set at 2.1 bar, pressure relief valve is set at 8.0 bar). CWIC352310 (pressure reducing valve is adjustable between 1.0 & 6.0 bar, pressure relief valve set at 8 bar).

Approval Holder:
Reliance Worldwide Corporation (UK) Ltd
Company Name
Reliance Worldwide Corporation (UK) Ltd
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#2104002

Range of one way and two way manually operated needle valves incorporating brushed stainless steel bodies, rising spindle balancing mechanism and EPDM ‘O’-rings with a metal seat. Maximum working pressure 25.0 bar. Cold water use only.

Section:
2348 Valves
Section Subtitle:
Balancing.
WRAS Approval Number:
2104002
Size:
⅜” BSP (F) X ⅜” BSP (M)
Marking:
ACMO + model on adhesive label on body.
Installation Requirements:
R001
Expiry date:
30/04/2026
Model:
NV/OW/304/3/8” NV/TW/304/3/8”

Approval Holder:
AC.MO S.r.l.
Company Name
AC.MO S.r.l.
Address
Via T. Da Modena, 28 Roncade
Postcode
31056
Country
Italy
General Email
info@acmospa.com

View All Listings by this Company

Print This Approval


#2106021

Range of commercial washing machines with flow controlled by solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The products are supplied with three ¾” x ¾” BSP (F) double check valve assemblies (suitable for backflow protection against Fluid Category 3) for installation on each inlet prior to a HDPE inlet hose with ¾” x ¾” captive nut end connections. Maximum working pressure 5.7 Bar. Maximum operating temperature 60°C.

Section:
2370 Washing Machine(s)
WRAS Approval Number:
2106021
Note:
This appliance incorporates a Fluid Category 5 backflow prevention device. The double check valve assemblies supplied with this product must be installed on all available inlets to maintain the validity of the WRAS approval. No detergents, softeners or other products are to be placed within the dispenser compartment that represent a risk greater than Fluid Category 3.
Size:
¾” BSP (F) (to double check valve assembly)
Marking:
Alliance Laundry logo, model, serial number, product info on label on back panel. Alliance laundry logo, model, serial number on label inside of door.
Installation Requirements:
R001 R160 R574
Expiry date:
30/06/2026
Model:
UCEXXX, SCEXXX, HCEXXX, ICEXXX & PCEXXX XXX denotes the drum capacity and can be replaced with the following digits representing lb’s: 020, 030, 040, 060, 080 & 100.

Approval Holder:
Alliance Laundry CE s.r.o
Company Name
Alliance Laundry CE s.r.o
Address
Místecká 1116, 742 58 Príbor
Country
Czech Republic
Phone
+420 556 768 885

View All Listings by this Company

Print This Approval


#2106047

Range OF JLA commercial washing machines with flow controlled by solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The products are supplied with three ¾” x ¾” BSP (F) double check valve assemblies (suitable for backflow protection against Fluid Category 3) for installation on each inlet prior to a HDPE inlet hose with ¾” x ¾” captive nut end connections. Maximum working pressure 5.7 Bar. Maximum operating temperature 60°C.

Section:
2370 Washing Machine(s)
WRAS Approval Number:
2106047
Note:
This appliance incorporates a Fluid Category 5 backflow prevention device. The double check valve assemblies supplied with this product must be installed on all available inlets to maintain the validity of the WRAS approval. No detergents, softeners or other products are to be placed within the dispenser compartment that represent a risk greater than Fluid Category 3.
Size:
¾” BSP (F) (to double check valve assembly)
Marking:
JLA logo, model, serial number, product info on label on back panel.
Installation Requirements:
R001 R160 R574
Expiry date:
30/06/2026
Model:
JLA20 JLA30 JLA40 JLA60
Product Images

Approval Holder:
JLA Ltd
Company Name
JLA Ltd
Address
Meadowcroft Lane Ripponden West Yorkshire
Postcode
HX6 4AJ
Country
Ripponden

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 21 of 451

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.