Shower Outlets

Section Code 1650 : Shower head(s) and/or shower handset(s).

Back To Directory Sections

#240404008

Chromium plated overhead shower outlet. Maximum operating temperature 70°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240404008
Note:
Open outlet use only
Size:
½” BSP (F)
Marking:
Aqualona on body
Installation Requirements:
R001 R040
Expiry date:
30/04/2029
Model:
19788
Product Images

Approval Holder:
Aqualona Products Ltd
Company Name
Aqualona Products Ltd
Address
Level 4 Cranbourne House, Summit Road, Potters Bar Herts
Postcode
EN6 3JN,
Country
United Kingdom
Phone
01707 641 929
General Email
tracey.gillingham@aqualona.com

View All Listings by this Company

Print This Approval


#240402035

Range of chromium plated brass shower outlets, shower arms and ceiling connectors. Model 26 034 xxx is supplied with a shower arm, and model 26 035 xxx is supplied with a ceiling connector. Maximum operating temperature 60.0°C. Open outlet use only.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240402035
Size:
Overhead shower - ½” BSP (F). Connectors and arms - ½” BSP (M).
Marking:
Axor on shower face.
Installation Requirements:
R001 R040
Expiry date:
30/04/2029
Model:
26 034 xxx 26 035 xxx 30 247 118 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240402036

Range of overhead shower outlets with chrome plated plastic bodies. The inlets incorporate a flow regulator. Maximum operating temperature 60.0°C Open outlet use only.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240402036
Size:
Stainless steel braided TPSIV lined hose incorporating 1/2" BSP (F) captive nut and 1/2" BSP (M) connections.
Marking:
Hansgrohe on shower face.
Installation Requirements:
R001 R040
Expiry date:
30/04/2029
Model:
26 252 xx0 26 253 xx0 26 254 180 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#241002001

Range of shower connectors (brass body - various finishes). Open outlet. Maximum operating temperature: 85.0°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
241002001
Size:
½” BSP (M) x ½” BSP (F).
Marking:
XX 1725 YY - Lefroy Brooks ‘lion’ logo located on outside edge of the swivel ball housing. PSP018 YY - Lefroy Brooks ‘lion’ logo located on outside of the swivel knuckle.
Installation Requirements:
R001 R040
Expiry date:
31/10/2029
Model:
XX 1725 YY PSP018 YY For XX 1725 YY Models – First letters (e.g., XX) – These are replaced with letters representing the name of the trim set that the product is being placed with. The number of letters will depend on the name of the trim. An example is 'LB' which represents 'Classic'. The submission models have only been allocated ‘LB’. Middle four numbers (1725) – This is a numeric code allocated to the product and remains constant. Last letters (e.g., YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the finish. Available surface finishes are, but not limited to: - CP - Polished Chrome - NK - Polished Nickel - BC - Brushed Chrome - BN - Brushed Nickel - PB - Polished Brass - BPB - Brushed Brass - AB - Aged Brass - TA - Taunton - AG - Antique Gold - HRG - Hard Rubbed Gold - CM - Champagne Gold - BCM - Brushed Champagne Gold - CO - Copper - MBC - Matt Black Chrome For PSP018 YY models – PSP018 is identification code and remains constant. Last letters (e.g., YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the finish. Available surface finishes are, but not limited to: - CP - Polished Chrome - NK - Polished Nickel - BC - Brushed Chrome - BN - Brushed Nickel - PB - Polished Brass - BPB - Brushed Brass - AB - Aged Brass - TA - Taunton - AG - Antique Gold - HRG - Hard Rubbed Gold - CM - Champagne Gold - BCM - Brushed Champagne Gold - CO - Copper - MBC - Matt Black Chrome

Approval Holder:
Lefroy Brooks
Company Name
Lefroy Brooks
Address
Unit 3 Marston Industrial Estate Marston Road Wolverhampton
Postcode
WV2 4LX
Country
United Kingdom
Phone
01902 390 891
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#240408002

Range of shower handsets with plated plastic bodies (various finishes). The inlet incorporates a plastic strainer. Maximum operating temperature 60ºC.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240408002
Size:
½” BSP (M).
Marking:
Hansgrohe and Crometta on handle.
Installation Requirements:
R001 R040
Expiry date:
30/04/2029
Model:
26 330 XXX, 26 331 XXX, 26 332 XXX, 26 333 XXX, 26 334 XXX, 26 336 XXX. Models added April 2025: 26 090 xx0, 26 340 xx0.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240488001

Range of ABS plastic shower handsets, (various finishes) Maximum operating temperature 85°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240488001
Note:
Open outlet use only
Size:
½” BSP (M)
Marking:
PPI on body
Installation Requirements:
R001 R040
Expiry date:
30/04/2029
Model:
HS1010 XXX XXX Denotes the following for different finishes: Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval


#2312387

Range of plastic shower handsets available in various finishes. Maximum operating temperature 65°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2312387
Note:
Open Outlet use only.
Size:
½” BSP (M).
Marking:
Banomi on handset
Installation Requirements:
R001 R040
Expiry date:
31/12/2028
Model:
112500/79A

Approval Holder:
Idrosanitaria Bonomi SpA
Company Name
Idrosanitaria Bonomi SpA
Address
Via Monsuello, 36 Lumezzane S.S Brescia
Postcode
25065
Country
Italy
Phone
+39 030 8922111
General Email
massimoplati@idrobonomi.com

View All Listings by this Company

Print This Approval


#240404029

Range of shower outlets with plastic bodies (various finishes). Model 100184782 has flow regulator at the inlet and a shower arm. Maximum working pressure: open outlet. Maximum operating temperature: 70°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240404029
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M).
Marking:
Backplate etched with Porcelanosa and bottom of handsets etched with NK Porcelanosa.
Installation Requirements:
R001 R040
Expiry date:
30/04/2029
Model:
100184782 - TONO SHOWERHEAD 400MM CHROME, 100038634 - COTA HANDSHOWER CHROME, 100213273 COTA HANDSHOWER CHROME BLACK.
Product Images

Approval Holder:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
CV-20 Km2 VILA-REAL CASTELLON
Postcode
12540
Country
Spain
General Email
certificaciones@noken.com

View All Listings by this Company
Manufacturer:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
CV-20 Km2 VILA-REAL CASTELLON
Postcode
12540
Country
Spain
General Email
certificaciones@noken.com

View All Listings by this Company

Print This Approval


#240502006

Range of overhead shower outlets with chromium plated brass bodies. For installation with specific rough kit sets, incorporating stainless steel strainers and flow regulators in the inlet. Maximum operating temperature 80.0°C For open outlet use

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240502006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F).
Marking:
Dornbracht on shower head.
Installation Requirements:
R001 R010 R040
Expiry date:
31/05/2029
Model:
Rain shower 28031970, 28032970, 28033970, 28034970, 28041980, 28042980, 28043980, 28044980. Concealed rough kits 3503397090, 3503497090, 3504197090, 3504297090, 3504397090, 3504497090.
Product Images

Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#240502014

Concealed, wall mounted elbow fitting with a brass body incorporating EDPM `O`-rings. Maximum working pressure: 10.0 Bar. Maximum operating temperature: 70.0°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240502014
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F).
Marking:
Dornbracht and DR on body.
Installation Requirements:
R001 R040
Expiry date:
31/05/2029
Model:
3508597090
Product Images

Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#240504003

Range of shower handsets and shower kits. Shower kits 2.1703.391, 2.1703.015 & 2.1703.016 incorporate a shower handset, shower hose and riser rail. Shower handset inlets incorporate a flow regulator. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240504003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½ BSP (M).
Marking:
Mira on body.
Installation Requirements:
R001
Expiry date:
31/05/2029
Model:
1.1605.237 Mira Beat 110 Multi Mode Handset Chrome (Module No: 1740.065) 1.1605.238 Mira Beat 110 Multi Mode Handset White (Module No: 1740.066) 2.1703.009 Mira Beat 90 Single Mode White (Module No: 1703.452) 2.1703.011 Mira Beat 90 Single Mode Chrome (Module No: 1703.460) 2.1703.010 Mira Beat 90 Multi Mode White (Module No: 1703.251) 2.1703.012 Mira Beat 90 Multi Mode Chrome (Module No: 1703.250) 2.1703.015 Mira Beat 90 Fittings Kit White/Chrome 2.1703.016 Mira Beat 90 Fittings Kit Chrome 2.1703.391 Mira Beat 90 Bath Shower Fittings Kit (Chrome) 2.1831.003 Mira Beat 90 Eco Multi Mode Handset Chrome (Module No: 1831.001) Model added October 2023: 39178W-CP Mira Beat 90 Single Mode Chrome Model added November 2023: (39187W) Mira Beat 90 Fittings Kit Chrome Model added May 2024: 1329590 Mira Beat Multi Mode High Flow Handset (Chrome).
Product Images

Approval Holder:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

Print This Approval


#240502026

Range of shower outlets with chrome plated brass bodies incorporating a single check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Model 28450410 is a wall elbow for use with the shower sets and incorporates a check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Open outlet use only. Maximum operating temperature: 60.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240502026
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M).
Marking:
Shower outlets: Dornbracht logo on centre of showerhead. Wall elbow: Dornbracht logo on backplate.
Installation Requirements:
R001 R040
Expiry date:
31/05/2029
Model:
27803361, 27803371, 28002970, 28450410, 28450370.
Product Images

Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#240504019

Range of shower outlets, (brass bodies - various finishes), incorporating ball joints, EPDM ‘O’-rings and NBR rubber seals. Maximum operating temperature 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240504019
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1” BSP (F) ½” BSP (F) ¾” BSP (M) ½” BSP (M
Marking:
THG etched on body
Installation Requirements:
R001 R040
Expiry date:
31/05/2029
Model:
186PR/W,286/W,288L/W,290/B/W,290/J/W,290/M/W,910PR/W & 3640/W Finishes: A01 – Brass polished, uncoated A02 – Polished Chrome B01 – Polished Nickel C01 – Matt Nickel C02 – Matt Chrome C03 – Satin Chrome C05 – Nickel satiné C47 – Nickel Fumé D01 – Varnished Clear Bronze D05 – Varnished Matt Bronze D13 – Carbon D24 – Black nickel (Aranja) F01 – Polished Gold F03 – Satin gold F07 – Matt gold F18 – Rhodium Silver F19 – Matt Rhodium Silver F27 – Rose Gold F30 – Soft gold F31 – Soft matt gold F32 – Soft satin gold F33 – Brown bronze F34 – Matt brown bronze color PVD H03 – Varnished Antique Silver H06 – Red copper matt, coated H07 – Matt Antique Red Copper H17 – Matt aranja H21 – Red copper polished, uncoated H24 – Varnished Antique Red Copper H27 – Bronze satin H28 – Antique nickel H30 – Antique matt sylver H49 – Brass color PVD H50 – Matt brass color PVD H52 – Gold color PVD H53 – Matt gold color PVD H55 – Nickel color PVD H56 – Matt nickel color PVD H58 – Brushed stainless steel color PVD H59 – Stainless steel color PVD H60 – Matt blush PVD H62 – Blush PVD H63 – Dark Nickel H64 – Graphite PVD H65 – Matt graphite PVD H66 – Umber PVD H67 – Matt umber PVD
Product Images

Approval Holder:
THG Paris
Company Name
THG Paris
Address
35 rue Tournière Béthencourt sur Mer
Postcode
80130
Country
France
Phone
+33 3.22.60.20.80
General Email
cvallee@thg.fr

View All Listings by this Company

Print This Approval


#240608001

Range of wall or ceiling mounted shower outlets with plastic bodies (various finishes) and brass shower arms (various finishes, incorporating EPDM O-rings and plastic flow regulators. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240608001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Products with ceiling connectors are to be installed with 24 010 180 basic set. 24 010 180 basic set is not approved in it's own right.
Size:
See models Products with ceiling connectors are to be installed with 24 010 180 basic set
Marking:
Hansgrohe on shower plates (Models 24 003, 24 013, 24 002 & 24 012). AXOR on shower plate (Models 35 274, 35 278 & 35 277).
Installation Requirements:
R001 R040
Expiry date:
30/06/2029
Model:
24 002 400 - Hansgrohe | Rainmaker Select 460 1jet overhead shower with ceiling connector 24 002 600 - Hansgrohe | Rainmaker Select 460 1jet overhead shower with ceiling connector 24 003 400 - Hansgrohe | Rainmaker Select 460 1jet overhead shower - 1/2" BSP (M) 24 003 600 - Hansgrohe | Rainmaker Select 460 1jet overhead shower - 1/2" BSP (M) 24 012 400 - Hansgrohe | Rainmaker Select 460 1jet overhead shower EcoSmart 9 l/min with ceiling connector 24 013 400 - Hansgrohe | Rainmaker Select 460 1jet overhead shower EcoSmart 9 l/min - 1/2" BSP (M) 35 274 xx0 - AXOR ShowerSolutions Overhead shower 460 / 300 1jet - 1/2" BSP (M) 35 277 xx0 - AXOR ShowerSolutions Overhead shower 460 / 300 1jet with ceiling connector 35 278 xx0 - AXOR ShowerSolutions Overhead shower 460 / 300 1jet - 1/2" BSP (M) 24 010 180 - Hansgrohe | Rainmaker Select Basic Set - 1/2" BSP (F)

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240608002

Range of chrome plated plastic bodied or brass bodied (28 489 xxx model) overhead shower outlets. The 27 405 xxx model is supplied with a ceiling mounted shower arm and the 27 424 xxx models with a wall mounted shower arm, both are chromium plated brass. All shower outlets incorporate a combined EPDM washer and plastic strainer on the inlet. Maximum operating temperature 70°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240608002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only.
Size:
1/2" BSP (F)
Marking:
1/2" BSP (F)
Installation Requirements:
R001 R040
Expiry date:
30/06/2029
Model:
27 405 xx0 - Hansgrohe | Raindance Classic 27 424 xx0 - Hansgrohe | Raindance Classic 28 474 xx0 - AXOR Montreux 28 487 xx0 - AXOR Montreux 28 489 xx0 - AXOR Citterio Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240503003

Range of shower kits, comprising of (chrome plated or white) shower handsets that incorporate flow restrictors in the inlets, shower hoses and riser rail assemblies. The handsets can also be supplied separately (see models). Maximum operating temperature 65°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240503003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Shower Kits – ½” BSP conical nut Handsets – ½” BSP (M)
Marking:
BRISTAN on the handset
Installation Requirements:
R001 R040
Expiry date:
31/05/2029
Model:
Kits EV KIT-EEFB C EV KIT-EEFB C H EV KIT-EEVK C EV KIT-EFB C EVC KIT01 2M C EVC KIT01 C EVC KIT02 C EVF KIT03 C Handsets EVC HAND01 C EVC HAND02 C EVC HAND03 C EVC HAND04 C EVC HAND04 WC EVC HAND05 C

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#240588002

Range of shower kits, comprising of (chrome or matte black) shower handsets, shower hoses and riser rail assemblies. The shower handsets incorporate plastic flow regulators. Maximum operating temperature: 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240588002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only.
Size:
1/2" BSP conical nut.
Marking:
Handsets Methven Shower Hoses DTC15, WRAS, year of manufacture (YY)
Installation Requirements:
R001 R040
Expiry date:
31/05/2029
Model:
EKIT09/KR EKIT09/KRBK

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2301370

Range of shower outlets with brass bodies (various finishes) and NBR ‘O’-rings. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2301370
Size:
15mm compression
Marking:
Bagnodesign on body.
Installation Requirements:
R001 R040
Expiry date:
31/01/2028
Model:
M-LINE/TOKO/TEATRO HAND SHOWER BDD-MLI-D515-A-XX XX’ denotes finish and is replaced with: Matt Black (MB), Chrome (CP), Anthracite (AN), PVD Gold (PG), Brushed Nickel (NB) & Black (MB-C) BDD-MLI-D515-B-XX XX’ denotes finish and is replaced with: Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS) & Burgundy (BUR)

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
Country
United Kingdom
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#2305357

Range of shower heads with chromium plated ABS bodies. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 75°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2305357
Size:
½” BSP (F)
Marking:
Aquaeco on body.
Installation Requirements:
R001 R040
Expiry date:
31/05/2028
Model:
AQUAECO ABS ROUND SHOWER HEAD AQE-ECO-520R-XX AQUAECO ABS SQUARE SHOWER HEAD AQE-ECO-520S-XX XX’ denotes finish and is replaced with: Matt Black (MB), Chrome (CP), Anthracite (AN), PVD Gold (PG), Brushed Nickel (NB) & Black (MB-C) Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS) & Burgundy (BUR)

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
Country
United Kingdom
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#2304101

Range of showers handsets with plastic bodies. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2304101
Size:
½” BSP (M).
Marking:
Villeroy & Boch on body.
Installation Requirements:
R001 R040
Expiry date:
30/04/2028
Model:
TVS109006000XX

Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 21 of 30

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.