'Reno 100'. Black coloured (with blue external stripes), extruded polyethylene pipe. For use with water up to 23°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

2011503

Expiry date:

30/11/2025

Approval Holder:

Idrotherm 2000 SpA

Company Name

Idrotherm 2000 SpA

Address

Via Pio La Torre, 21 55032 Castelnuovo di Garfagnana (LU)

Country

Italy

View All Listings by this Company

'Saatifil PES 200/43'. White coloured PET material. For use with water up to 85°C.

Section:

5246 Polyethylene Terephthalate (PET)

Expiry date:

31/12/2025

Approval Holder:

Saati Spa

Company Name

Saati Spa

Address

Via Como 14, 22070 Veniano-Como, Italy

Phone

+39.031.9711

General Email

info.IT@saati.com

View All Listings by this Company

'Griffon WDF-05'. Site applied, blue coloured solvent cement. Apply as per manufacturer's instructions '6311380 20200708'. Cure for 30 minutes@12°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5560 Solvent Cements

Expiry date:

31/12/2025

Approval Holder:

Bison International

Company Name

Bison International

Address

PO Box 160 NL 4460 A D Goes Netherlands

View All Listings by this Company

`Aqua Clean Mera` range of bidets incorporating an electronically operated seat, flow is controlled by solenoid valve and discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 10.0 bar. Cold water supply only.

Section:

0278 Bidets and associated fittings

Size:

3/8” BSP captive nut

Marking:

Geberit under seat lid.

Installation Requirements:

R001 R574

Expiry date:

31/01/2026

Model:

Geberit AquaClean Mera Comfort 146.210.11.1 (white) 146.210.21.1 (chrome) Geberit AquaClean Mera Classic 146.200.11.1 (white) 146.200.21.1 (chrome)

Approval Holder:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Country

United Kingdom

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company

Manufacturer:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Country

United Kingdom

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company

Spring loaded resilient trim, in-line check valve cartridge with plastic guides and stem and EPDM seals within a plastic housing. For insertion into pipes or fittings with specifically dimensioned bores. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C

Section:

0026 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.

WRAS Approval Number:

2106031

Marking:

Korie, 1st 4 digits of product code, (e.g. OF14) and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

OF14200000 DN14, OF15200000 DN15, OF20200000 DN20, OF25200000 DN25.

Product Images

Approval Holder:

Yuhuan Korie Plastic Factory

Company Name

Yuhuan Korie Plastic Factory

Address

Technology Industry Functional Area, Chumen Village Yuhuan

Country

Zhejiang

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2104071

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½ captive nut end connections.

Marking:

Eastbrook on Body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2026

Model:

56.2005, 56.2012, 56.2015, 56.2010, 56.2017, 56.2007 & 56.2078 COMBINATION TAP ASSEMBLIES

Approval Holder:

Eastbrook Company

Company Name

Eastbrook Company

Postcode

GL4 3DB

Country

United Kingdom

General Email

christopher.russell@eastbrookco.com

View All Listings by this Company

Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (chromium plated brass or stainless steel - INOX models), comprising of a concealed rough in set with a brass body and a variety of separate trim sets incorporating a ceramic cartridge headwork with a dome type or single lever operating member and a spout outlet. The spout outlet incorporates a plastic aerator. The products are supplied with click type (click clack) waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2107017

Note:

Note: The F3600 rough in set is not approved in its own right.

Size:

½” BSP (F)

Marking:

FIMA on operating member.

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2026

Model:

F3600 (Rough in set) concealed body for wall mounted wash basin mixer, which must be installed with the following trim sets: Dome type operating member & 45° spout: F3051NX8G L150 mm G pattern, F3051NX8V L150 mm V pattern, F3051NX8X L150 mm X pattern, F3051X5G L150 mm G pattern, F3051X5V L150 mm V pattern, F3051X5X L150 mm X pattern, F3051NLX8G L200 mm G pattern, F3051NLX8V L200 mm V pattern, F3051NLX8X L200 mm X pattern, F3051LX5G L200 mm G pattern, F3051LX5V L200 mm V pattern, F3051LX5X L200 mm X pattern. Dome type operating member & 90° spout: F3051NX9G L150 mm G pattern, F3051NX9V L150 mm V pattern, F3051NX9X L150 mm X pattern, F3051NLX9G L 200 mm G pattern, F3051NLX9V L200 mm V pattern, F3051NLX9X L200 mm X pattern, F3051NSX9G L120 mm G pattern, F3051NSX9V L120 mm V pattern, F3051NSX9X L120 mm X pattern, F3051NZX9G L250 mm G pattern, F3051NZX9V L250mm V pattern, F3051NZX9X L250 mm X pattern. Single lever operating member & 45° spout: F3051X5 L150 mm, F3051LX5 L200 mm, F3081LX5INOX L200 mm spout, F3051NX8 L150 mm, F3051NLX8 L200 mm, F3081NX8INOX L150 mm spout, F3081NLX8INOX L200 mm spout. Single lever operating member & 90° spout: F3051NX9 L150 mm, F3051NLX9 L200 mm, F3051NSX9 L120 mm, F3051NZX9 L250 mm, F3081X5INOX L150 mm spout, F3081LX5INOX L200 mm spout, F3081NLX9INOX L200 mm spout, Single lever operating member & spout: F3141LX5 MAST L200 mm spout, F3141X5 MAST L150 mm spout, F3141NLX8 MAST L200 mm spout, F3141NX8 MAST L150 mm spout.

Product Images

Approval Holder:

Fima Carlo Frattini

Company Name

Fima Carlo Frattini

Postcode

28010

Country

Italy

Phone

0039 0322 9549

General Email

Daniela.sgarbossa@fimacf.com

View All Listings by this Company

Manufacturer:

Fima Carlo Frattini

Company Name

Fima Carlo Frattini

Postcode

28010

Country

Italy

Phone

0039 0322 9549

General Email

Daniela.sgarbossa@fimacf.com

View All Listings by this Company

Range of water filter systems with optional distributor heads. The inlets incorporate a non-return valve. Maximum working pressure 6.9 bar. Cold water use only.

Section:

1050 Filters and Housings

Size:

¾” BSP male inlet and outlet

Marking:

BRITA, WRAS and technical information on adhesive label on body.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

31/12/2025

Model:

Professional water filter system (B2B) "Purity Steam":- Purity 450 Steam including cartridge assembly Purity 450 and lid assembly MDU 450 or optional lid assembly DH 450. Purity 600 Steam including cartridge assembly Purity 600 Steam and lid assembly MDU 600 or optional lid assembly DH 600. Purity 1200 Steam including cartridge assembly 1200 and lid assembly MDU 1200 or optional lid assembly DH 1200 The models are available with two different distributor heads (MDU and DH), the MDU (measurement display unit) has an electronic display to show the filtered volume, the DH (distributor head) has no electronic display.

Product Images

Approval Holder:

Brita GmbH

Company Name

Brita GmbH

Address

Heinrich Hertz Strasse 4 D-65232 Taunusstein

Country

Germany

Phone

+49 6128 746 0

General Email

info@brita.net

View All Listings by this Company

Manufacturer:

Brita GmbH

Company Name

Brita GmbH

Address

Heinrich Hertz Strasse 4 D-65232 Taunusstein

Country

Germany

Phone

+49 6128 746 0

General Email

info@brita.net

View All Listings by this Company

Aquaflow polypropylene bodied compression fittings with EPDM ‘O’-rings for use with Elysee PE80 blue pipes. The fittings are supplied with a pipe liner. Above and below ground use. Maximum working pressure 12.5 bar. Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010409

Note:

The liners supplied with each fitting must be used to maintain the validity of this approval. R008 applies to the connecting blue pipework when used above ground.

Size:

See model

Marking:

Fittings: AQUAFLOW, DVGW, EU, size and PN on the compression nut. Size and date of manufacture (clock format) on body. Pipe: AQUAFLOW, EN12201, size, PN and production date code (CDDMMY, where C = decade, and is replaced with 6 to indicate 2020).

Installation Requirements:

R001 R008

Expiry date:

31/10/2025

Model:

Aquaflow fittings & pipes for WRAS Approval AQUAFLOW COMPRESSION FITTINGS 20mm, 25mm, 32mm Male Adaptor 3200*****Q / Female Adaptor 320A*****Q / Male Elbow 322A*****Q / Female Elbow 322B*****Q / Wall Female Elbow 322D*****Q - The first *** denotes the 1st end diameter (016→16mm, 020→20mm etc). The last ** denotes the BSP thread (male or female) in inches (01→1/2”, 02→3/4”, 03→1” etc) Coupling 321******Q / Elbow 322******Q - The first *** denotes the 1st end diameter (016→16mm, 020→20mm etc). The last *** denotes the 2nd end diameter (016→16mm, 020→20mm etc). Reducing Coupling 321A*****Q - The first *** denotes the 1st end diameter (016→16mm, 020→20mm etc). The last ** denotes the 2nd end diameter (16→16mm, 20→20mm etc). Female Tee 3230*****Q / Male Tee 323A*****Q - The first *** denotes the 1st and 2nd end diameters (016→16mm, 020→20mm etc). The last ** denotes the BSP thread in the middle of the part (male or female) in inches (01→1/2”, 02→3/4”, 03→1” etc) End Plug 320B00***Q - The last *** denotes the nominal diameter (016→16mm, 020→20mm etc). Tee 324******Q - The first *** denotes the nominal diameter left and right (016→16mm, 020→20mm etc). The last *** denotes the nominal diameter of the middle connection (016→16mm, 020→20mm etc). Reducing Tee 324A*****Q - The first *** denotes the nominal diameter left and right (016→16mm, 020→20mm etc). The last ** denotes the nominal diameter of the middle connection (16→16mm, 20→20mm etc). Elbow Female For POP-UP 322C*****Q - The first *** denotes the 1st and 2nd end diameters (016→16mm, 020→20mm etc). The last ** denotes the BSP thread in the middle of the part in inches (01→1/2”, 02→3/4”) Repair Coupling 321B00***Q - The last *** denotes the nominal diameter of the connection (left and right the same) (016→16mm, 020→20mm etc). Universal Adaptor 321C*****Q - The first *** denotes the nominal diameter of the PE pipe connection (016→16mm, 020→20mm etc). The last ** denotes the nominal diameter of the alternative pipe material connection (15→15mm, 22→22mm, 28→28mm). Global Transition 321D0****Q- The first ** denotes the diameter of the alternative pipe material connection (22→22mm, 27→27mm, 34→34mm) . The last ** denotes the nominal diameter of the PE pipe connection (20→20mm, 25→25mm, 32→32mm). AQUAFLOW PE80 BLUE PIPES 20mm, 25mm, 32mm 21125020***Q - 20mmX2.3mm, SDR9, SF1.25, PN12.5 21125025***Q - 25mmX2.3mm, SDR11, SF1.25, PN12.5 21125032***Q - 32mmX3.0mm, SDR11, SF1.25, PN12.5 For the pipe codes, first two digits are the product code (same for all), next three digits state pressure rating (125 – PN12.5 bars), next three digits show external diameter of pipe (020 – 20mm) and last three digits are the length of the coil as customer prefers (025-25m, 050-50m, 100-100m)

Approval Holder:

Kalsi Plastics (UK) Limited

Company Name

Kalsi Plastics (UK) Limited

Address

Kalsi House 5 Tomey Road Sparkhill

Postcode

B11 2NJ

Country

Birmngham

General Email

george.argiropoulos@elysee.com.cy

View All Listings by this Company

Range of press fittings incorporating brass or PVDF bodies and EPDM ‘O’-rings. For use with Henco standard PE-Xc/AL/PE-Xc pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2105324

Size:

See model

Marking:

Henco & size on body. Henco, pressure, PE-XC/AL, and other technical information on pipe

Installation Requirements:

R001

Expiry date:

31/05/2026

Model:

1P-1414 ELBOW 90° 14X14 1P-1616 ELBOW 90° 16X16 1P-1818 ELBOW 90° 18X18 1P-2020 ELBOW 90° 20X20 1P-2626 ELBOW 90° 26X26 1P-3232 ELBOW 90° 32X32 2P-1604 BACKPLATE ELBOW FEMALE 16X1/2" 2P-1804 BACKPLATE ELBOW FEMALE 18X1/2 2P-2004 BACKPLATE ELBOW FEMALE 20X1/2 2P-2005 BACKPLATE ELBOW FEMALE 20X3/4 2P-2605 BACKPLATE ELBOW FEMALE 26X3/4 2P-1404K BACKPLATE ELBOW FEMALE SHORT MODEL 14X1/2 2P-1604K BACKPLATE ELBOW FEMALE SHORT MODEL16X1/2 3P-160416 DOUBLE BACKPLATE ELBOW FEMALE 16X1/2X16 3P-200420 DOUBLE BACKPLATE ELBOW FEMALE 20X1/2 X20' 3P-160416VK DOUBLE BACKPLATE ELBOW FEMALE 16X1/2X16 SHORT MODEL 3P-200420VK DOUBLE BACKPLATE ELBOW FEMALE 20X1/2X20 SHORT MODEL 5P-1404 BEND 90° MALE IRON ADAPTER 14X1/2 5P-1603 BEND 90° MALE IRON ADAPTER 16X3/8 5P-1604 BEND 90° MALE IRON ADAPTER 16X1/2 5P-1804 BEND 90° MALE IRON ADAPTER 18X1/2 5P-2004 BEND 90° MALE IRON ADAPTER 20X1/2 5P-2005 BEND 90° MALE IRON ADAPTER 20X3/4 5P-2605 BEND 90° MALE IRON ADAPTER 26X3/4 5P-3206 BEND 90° MALE IRON ADAPTER 32X1 6P-1404 BEND 90° FEMALE IRON ADAPTER 14X1/2 6P-1604 BEND 90° FEMALE IRON ADAPTER 16X1/2 6P-1804 BEND 90° FEMALE IRON ADAPTER 18X1/2 6P-2004 BEND 90° FEMALE IRON ADAPTER 20X1/2 6P-2005 BEND 90° FEMALE IRON ADAPTER 20X3/4 6P-2605 BEND 90° FEMALE IRON ADAPTER 26X3/4 8P-1604 WASHING MACHINE ADAPTER 16X1/2 9P-141414 T-PIECE 14X14X14 9P-161616 T-PIECE 16X16X16 9P-181818 T-PIECE 18X18X18 9P-202020 T-PIECE 20X20X20 9P-262626 T-PIECE 26X26X26 9P-323232 T-PIECE 32X32X32 10P-161416 T-REDUCED IRON CENTRE 16X14X16 10P-181618 T-REDUCED IRON CENTRE 18X16X18 10P-201620 T-REDUCED IRON CENTRE 20X16X20 10P-201820 T-REDUCED IRON CENTRE 20X18X20 10P-261626 T-REDUCED IRON CENTRE 26X16X26 10P-262026 T-REDUCED IRON CENTRE 26X20X26 10P-321632 T-REDUCED IRON CENTRE 32X16X32 10P-321832 T-REDUCED IRON CENTRE 32X18X32 10P-322032 T-REDUCED IRON CENTRE 32X20X32 10P-322632 T-REDUCED IRON CENTRE 32X26X32 11P-181616 T-BRANCH AND LINE REDUCED 18X16X16 11P-201616 T-BRANCH AND LINE REDUCED 20X16X16 11P-201818 T-BRANCH AND LINE REDUCED 20X18X18 11P-202016 T-BRANCH AND LINE REDUCED 20X20X16 11P-261620 T-BRANCH AND LINE REDUCED 26X16X20 11P-262020 T-BRANCH AND LINE REDUCED 26X20X20 11P-262616 T-BRANCH AND LINE REDUCED 26X26X16 11P-262620 T-BRANCH AND LINE REDUCED 26X26X20 11P-322026 T-BRANCH AND LINE REDUCED 32X20X26 11P-322626 T-BRANCH AND LINE REDUCED 32X26X26 12P-162016 T-ENLARGED BRANCH 16X20X16 12P-202620 T-ENLARGED BRANCH 20X26X20 12P-263226 T-ENLARGED BRANCH 26X32X26 13P-160416 T-WITH FEMALE IRON BRANCH 16X1/2 X16 13P-200420 T-WITH FEMALE IRON BRANCH 20X1/2 X20 13P-200520 T-WITH FEMALE IRON BRANCH 20X3/4 X20 13P-260426 T-WITH FEMALE IRON BRANCH 26X1/2 X26 13P-260526 T-WITH FEMALE IRON BRANCH 26X3/4 X26 13P-320532 T-WITH FEMALE IRON BRANCH 32X3/4 X32 13P-320632 T-WITH FEMALE IRON BRANCH 32X1 X32 13P-320732 T-WITH FEMALE IRON BRANCH 32X5/4 X32 14P-160416 T-WITH MALE IRON BRANCHE 16X1/2 X16 14P-200420 T-WITH MALE IRON BRANCHE 20X1/2 X20 14P-200520 T-WITH MALE IRON BRANCHE 20X3/4 X20 14P-260426 T-WITH MALE IRON BRANCHE 26X1/2 X26 14P-260526 T-WITH MALE IRON BRANCHE 26X3/4 X26 14P-260626 T-WITH MALE IRON BRANCHE 26X1 X26 14P-320532 T-WITH MALE IRON BRANCHE 32X3/4 X32 14P-320632 T-WITH MALE IRON BRANCHE 32X1 X32 15P-1414 STRAIGHT COUPLING 14X14 15P-1616 STRAIGHT COUPLING 16X16 15P-1717 STRAIGHT COUPLING 17X17 15P-1818 STRAIGHT COUPLING 18X18 15P-2020 STRAIGHT COUPLING 20X20 15P-2626 STRAIGHT COUPLING 26X26 15P-3232 STRAIGHT COUPLING 32X32 16P-1614 REDUCING COUPLING 16X14 16P-1816 REDUCING COUPLING 18X16 16P-2016 REDUCING COUPLING 20X16 16P-2018 REDUCING COUPLING 20X18 16P-2616 REDUCING COUPLING 26X16 16P-2620 REDUCING COUPLING 26X20 16P-3216 REDUCING COUPLING 32X16 16P-3220 REDUCING COUPLING 32X20 16P-3226 REDUCING COUPLING 32X26 17P-1403 STRAIGHT MALE IRON ADAPTER 14X3/8 17P-1404 STRAIGHT MALE IRON ADAPTER 14X1/2 17P-1603 STRAIGHT MALE IRON ADAPTER 16X3/8 17P-1604 STRAIGHT MALE IRON ADAPTER 16X1/2 17P-1604-CS STRAIGHT MALE IRON ADAPTER 16X1/2 17P-1605 STRAIGHT MALE IRON ADAPTER 16X3/4 17P-1804 STRAIGHT MALE IRON ADAPTER 18X1/2 17P-1805 STRAIGHT MALE IRON ADAPTER 18X3/4 17P-2004 STRAIGHT MALE IRON ADAPTER 20X1/2 17P-2004-CS STRAIGHT MALE IRON ADAPTER 20X1/2 17P-2005 STRAIGHT MALE IRON ADAPTER 20X3/4 17P-2005-CS STRAIGHT MALE IRON ADAPTER 20X3/4 17P-2605 STRAIGHT MALE IRON ADAPTER 26X3/4 17P-2605-CS STRAIGHT MALE IRON ADAPTER 26X3/4 17P-2606 STRAIGHT MALE IRON ADAPTER 26X1 17P-2606-CS STRAIGHT MALE IRON ADAPTER 26X1 17P-3206 STRAIGHT MALE IRON ADAPTER 32X1 17P-3207 STRAIGHT MALE IRON ADAPTER 32X5/4 18P-1404 STRAIGHT NIPPLE FEMALE 14X1/2 18P-1604 STRAIGHT NIPPLE FEMALE 16X1/2 18P-1804 STRAIGHT NIPPLE FEMALE 18X1/2 18P-1805 STRAIGHT NIPPLE FEMALE 18X3/4 18P-2004 STRAIGHT NIPPLE FEMALE 20X1/2 18P-2005 STRAIGHT NIPPLE FEMALE 20X3/4 18P-2605 STRAIGHT NIPPLE FEMALE 26X3/4 18P-2606 STRAIGHT NIPPLE FEMALE 26X1 18P-3206 STRAIGHT NIPPLE FEMALE 32X1 18P-3207 STRAIGHT NIPPLE FEMALE 32X5/4 19P-1405 PRESS-FIT ADAPTER TO EUROCONE 14X3/4 19P-1605 PRESS-FIT ADAPTER TO EUROCONE 16X3/4 19P-1805 PRESS-FIT ADAPTER TO EUROCONE 18X3/4 19P-2005 PRESS-FIT ADAPTER TO EUROCONE 20X3/4 27P-2626 45° BEND 26X26 27P-3232 45° BEND 32X32 28P-14041604-1 DOUBLE BACKPLATE ELBOW FEMALE,BUILD-UP 14X1/2 X16X1/2 28P-16041604-1 DOUBLE BACKPLATE ELBOW FEMALE,BUILD-UP 16X1/2 X16X1/2 33P-1605 NICKEL PLATED PR,-FIT ADAPT, TO EUROC. BENT 90° 16X3/4 36P-1612P PRESS-FIT ADAPTER TO COPPER PRESS 16X12 36P-1614P PRESS-FIT ADAPTER TO COPPER PRESS 16X14 36P-1615P PRESS-FIT ADAPTER TO COPPER PRESS 16X15 36P-1616P PRESS-FIT ADAPTER TO COPPER PRESS 16X16 36P-2015P PRESS-FIT ADAPTER TO COPPER PRESS 20X15 36P-2018P PRESS-FIT ADAPTER TO COPPER PRESS 20X18 36P-2022P PRESS-FIT ADAPTER TO COPPER PRESS 20X22 36P-2622P PRESS-FIT ADAPTER TO COPPER PRESS 26X22 36P-2628P PRESS-FIT ADAPTER TO COPPER PRESS 26X28 36P-3228P PRESS-FIT ADAPTER TO COPPER PRESS 32X28 1PK-1414 ELBOW 90° 14X14 1PK-1616 ELBOW 90° 16X16 1PK-1818 ELBOW 90° 18X18 1PK-2020 ELBOW 90° 20X20 1PK-2626 ELBOW 90° 26X26 1PK-3232 ELBOW 90° 32X32 1PK-4040 ELBOW 90° 40X40 1PK-5050 ELBOW 90° 50X50 1PK-6363 ELBOW 90° 63X63 2PK-1404BP BACKPLATE ELBOW FEMALE 14X1/2 2PK-1603 BACKPLATE ELBOW FEMALE 16X3/8 2PK-1604BP BACKPLATE ELBOW FEMALE 16X1/2 2PK-1604KBP BACKPLATE ELBOW FEMALE,SHORT MODEL 16X1/2 2PK-1804BP BACKPLATE ELBOW FEMALE 18X1/2 2PK-2004BP BACKPLATE ELBOW FEMALE 20X1/2 2PK-2005 BACKPLATE ELBOW FEMALE 20X3/4 2PK-2605 BACKPLATE ELBOW FEMALE 26X3/4 3PK-160416BP DOUBLE BACKPLATE ELBOW FEMALE,SHORT MODEL 16X1/2 X16 3PK-200420BP DOUBLE BACKPLATE ELBOW FEMALE,SHORT MODEL 20X1/2 X20 5PK-1404 BEND 90° MALE IRON ADAPTER 14X1/2 5PK-1604 BEND 90° MALE IRON ADAPTER 16X1/2 5PK-1804 BEND 90° MALE IRON ADAPTER 18X1/2 5PK-2004 BEND 90° MALE IRON ADAPTER 20X1/2 5PK-2005 BEND 90° MALE IRON ADAPTER 20X3/4 5PK-2605 BEND 90° MALE IRON ADAPTER 26X3/4 5PK-3206 BEND 90° MALE IRON ADAPTER 32X1 5PK-4007 BEND 90° MALE IRON ADAPTER 40X5/4 5PK-5007 BEND 90° MALE IRON ADAPTER 50X5/4 5PK-5008 BEND 90° MALE IRON ADAPTER 50X6/4 5PK-6310 BEND 90° MALE IRON ADAPTER 63X2 6PK-1404BP BEND 90° FEMALE IRON ADAPTER 14X1/2 6PK-1603 BEND 90° FEMALE IRON ADAPTER 16X3/8 6PK-1604BP BEND 90° FEMALE IRON ADAPTER 16X1/2 6PK-1804BP BEND 90° FEMALE IRON ADAPTER 18X1/2 6PK-2004BP BEND 90° FEMALE IRON ADAPTER 20X1/2 6PK-2005 BEND 90° FEMALE IRON ADAPTER 20X3/4 6PK-2605 BEND 90° FEMALE IRON ADAPTER 26X3/4 6PK-3206 BEND 90° FEMALE IRON ADAPTER 32X1 6PK-4007 BEND 90° FEMALE IRON ADAPTER 40X5/4 6PK-5007 BEND 90° FEMALE IRON ADAPTER 50X5/4 6PK-5008 BEND 90° FEMALE IRON ADAPTER 50X6/4 6PK-6310 BEND 90° FEMALE IRON ADAPTER 63 X 2 9PK-141414 T-PIECE 14X14X14 9PK-161616 T-PIECE 16X16X16 9PK-181818 T-PIECE 18X18X18 9PK-202020 T-PIECE 20X20X20 9PK-262626 T-PIECE 26X26X26 9PK-323232 T-PIECE 32X32X32 9PK-404040 T-PIECE 40X40X40 9PK-505050 T-PIECE 50X50X50 9PK-636363 T-PIECE 63X63X63 10PK-161416 T-REDUCED IRON CENTRE 16X14X16 10PK-181418 T-REDUCED IRON CENTRE 18X14X18 10PK-181618 T-REDUCED IRON CENTRE 18X16X18 10PK-201420 T-REDUCED IRON CENTRE 20X14X20 10PK-201620 T-REDUCED IRON CENTRE 20X16X20 10PK-201820 T-REDUCED IRON CENTRE 20X18X20 10PK-261626 T-REDUCED IRON CENTRE 26X16X26 10PK-261826 T-REDUCED IRON CENTRE 26X18X26 10PK-262026 T-REDUCED IRON CENTRE 26X20X26 10PK-321632 T-REDUCED IRON CENTRE 32X16X32 10PK-321832 T-REDUCED IRON CENTRE 26X18X26 10PK-322032 T-REDUCED CENTRE 32X20X32 10PK-322632 T-REDUCED CENTRE 32X26X32 10PK-401640 T-REDUCED IRON CENTRE 40X16X40 10PK-402040 T-REDUCED IRON CENTRE 40X20X40 10PK-402640 T-REDUCED IRON CENTRE 40X26X40 10PK-403240 T-REDUCED IRON CENTRE 40X32X40 10PK-502050 T-REDUCED IRON CENTRE 50X20X50 10PK-502650 T-REDUCED IRON CENTRE 50X26X50 10PK-503250 T-REDUCED IRON CENTRE 50X32X50 10PK-504050 T-REDUCED IRON CENTRE 50X40X50 10PK-632663 T-REDUCED IRON CENTRE 63X26X63 10PK-633263 T-REDUCED IRON CENTRE 63X32X63 10PK-634063 T-REDUCED IRON CENTRE 63X40X63 10PK-635063 T-REDUCED IRON CENTRE 63X50X63 11PK-161414 T-CENTRE AND LINE REDUCED 16X14X14 11PK-181616 T-CENTRE AND LINE REDUCED 18X16X16 11PK-201616 T-CENTRE AND LINE REDUCED 20X16X16 11PK-201818 T-CENTRE AND LINE REDUCED 20X18X18 11PK-202016 T-CENTRE AND LINE REDUCED 20X20X16 11PK-261616 T-CENTRE AND LINE REDUCED 26X16X16 11PK-261620 T-CENTRE AND LINE REDUCED 26X16X20 11PK-262016 T-CENTRE AND LINE REDUCED 26X20X16 11PK-262020 T-CENTRE AND LINE REDUCED 26X20X20 11PK-262616 T-CENTRE AND LINE REDUCED 26X26X16 11PK-262620 T-CENTRE AND LINE REDUCED 26X26X20 11PK-322026 T-CENTRE AND LINE REDUCED 32X20X26 11PK-322626 T-CENTRE AND LINE REDUCED 32X26X26 11PK-402032 T-CENTRE AND LINE REDUCED 40X20X32 11PK-402632 T-CENTRE AND LINE REDUCED 40X26X32 11PK-403232 T-CENTRE AND LINE REDUCED 40X32X32 11PK-404026 T-CENTRE AND LINE REDUCED 40X40X26 11PK-404032 T-CENTRE AND LINE REDUCED 40X40X32 11PK-502040 T-CENTRE AND LINE REDUCED 50X20X40 11PK-502640 T-CENTRE AND LINE REDUCED 50X26X40 11PK-503240 T-CENTRE AND LINE REDUCED 50X32X40 11PK-504040 T-CENTRE AND LINE REDUCED 50X40X40 12PK-161816 T-ENLARGED CENTRE 16X18X16 12PK-162016 T-ENLARGED CENTRE 16X20X16 12PK-202620 T-ENLARGED CENTRE 20X26X20 12PK-263226 T-ENLARGED CENTRE 26X32X26 12PK-324032 T-ENLARGED CENTRE 32X40X32 12PK-405040 T-ENLARGED CENTRE 40X50X40 13PK-160416BP T-FEMALE IRON CENTRE 16X1/2 X16 13PK-180418BP T-FEMALE IRON CENTRE 18X1/2 X18 13PK-200420BP T-FEMALE IRON CENTRE 20X1/2 20 13PK-200520 T-FEMALE CENTRE 20X3/4 X20 13PK-260420BP T-FEMALE IRON CENTRE 26X1/2 X20 13PK-260426BP T-FEMALE IRON CENTRE 26X1/2 X26 13PK-260526 T-FEMALE IRON CENTRE 26X3/4 X26 13PK-320532 T-FEMALE IRON CENTRE 32X3/4 X32 13PK-320632 T-FEMALE IRON CENTRE 32X4/4 X32 13PK-320732 T-FEMALE IRON CENTRE 32X5/4 X32 13PK-400540 T-FEMALE IRON CENTRE 40X3/4 X40 13PK-400640 T-FEMALE IRON CENTRE 40X4/4 X40 13PK-400740 T-FEMALE IRON CENTRE 40X5/4 X40 13PK-500550 T-FEMALE IRON CENTRE 50X3/4 X50 13PK-500850 T-FEMALE IRON CENTRE 50X6/4 X50 13PK-631063 T-FEMALE IRON CENTRE 63X2 X63 14PK-160416 T-MALE IRON CENTRE 16X1/2 X16 14PK-180418 T-MALE IRON CENTRE 18X1/2 X18 14PK-200420 T-MALE IRON CENTRE 20X1/2 X20 14PK-200520 T-MALE IRON CENTRE 20X3/4 X20 14PK-260426 T-MALE IRON CENTRE 26X1/2 X26 14PK-260526 T-MALE IRON CENTRE 26X3/4 X26 14PK-260626 T-MALE IRON CENTRE 26X1 X26 14PK-320532 T-MALE IRON CENTRE 32X3/4 X32 14PK-400640 T-MALE IRON CENTRE 40X1 X40 14PK-400740 T-MALE IRON CENTRE 40X5/4 X40 14PK-500850 T-MALE IRON CENTRE 50X6/4 X50 14PK-631063 T-MALE IRON CENTRE 63X2 X63 15PK-1414 STRAIGHT COUPLING 14X14 15PK-1616 STRAIGHT COUPLING 16X16 15PK-1818 STRAIGHT COUPLING 18X18 15PK-2020 STRAIGHT COUPLING 20X20 15PK-2626 STRAIGHT COUPLING 26X26 15PK-3232 STRAIGHT COUPLING 32X32 15PK-4040 STRAIGHT COUPLING 40X40 15PK-5050 STRAIGHT COUPLING 50X50 15PK-6363 STRAIGHT COUPLING 63X63 16PK-1614 REDUCING COUPLING 16X14 16PK-1814 REDUCING COUPLING 18X14 16PK-1816 REDUCING COUPLING 18X16 16PK-2014 REDUCING COUPLING 20X14 16PK-2016 REDUCING COUPLING 20X16 16PK-2018 REDUCING COUPLING 20X18 16PK-2616 REDUCING COUPLING 26X16 16PK-2618 REDUCING COUPLING 26X18 16PK-2620 REDUCING COUPLING 26X20 16PK-3216 REDUCING COUPLING 32X16 16PK-3220 REDUCING COUPLING 32X20 16PK-3226 REDUCING COUPLING 32X26 16PK-4026 REDUCING COUPLING 40X26 16PK-4032 REDUCING COUPLING 40X32 16PK-5032 REDUCING COUPLING 50X32 16PK-5040 REDUCING COUPLING 50X40 16PK-6340 REDUCING COUPLING 63X40 16PK-6350 REDUCING COUPLING 63X50 17PK-1404 STRAIGHT MALE IRON ADAPTER 14X1/2 17PK-1604 STRAIGHT MALE IRON ADAPTER 16X1/2 17PK-1804 STRAIGHT MALE IRON ADAPTER 18X1/2 17PK-1805 STRAIGHT MALE IRON ADAPTER 18X3/4 17PK-2004 STRAIGHT MALE IRON ADAPTER 20X1/2 17PK-2005 STRAIGHT MALE IRON ADAPTER 20X3/4 17PK-2605 STRAIGHT MALE IRON ADAPTER 26X3/4 17PK-2606 STRAIGHT MALE IRON ADAPTER 26X1 17PK-3206 STRAIGHT MALE IRON ADAPTER 32X1 17PK-3207 STRAIGHT MALE IRON ADAPTER 32X5/4 17PK-4006 STRAIGHT MALE IRON ADAPTER 40X1 17PK-4007 STRAIGHT MALE IRON ADAPTER 40X5/4 17PK-5008 STRAIGHT MALE IRON ADAPTER 50X6/4 17PK-6310 STRAIGHT MALE IRON ADAPTER 63X2 18PK-1404 STRAIGHT FEMALE IRON ADAPTER 14X1/2 18PK-1604 STRAIGHT FEMALE IRON ADAPTER 16X1/2 18PK-1804 STRAIGHT FEMALE IRON ADAPTER 18X1/2 18PK-1805 STRAIGHT FEMALE IRON ADAPTER 18X3/4 18PK-2004 STRAIGHT FEMALE IRON ADAPTER 20X1/2 18PK-2005 STRAIGHT FEMALE IRON ADAPTER 20X3/4 18PK-2605 STRAIGHT FEMALE IRON ADAPTER 26X3/4 18PK-2606 STRAIGHT FEMALE IRON ADAPTER 26X1 18PK-3206 STRAIGHT FEMALE IRON ADAPTER 32X1 18PK-3207 STRAIGHT FEMALE IRON ADAPTER 32X5/4 18PK-4006 STRAIGHT FEMALE IRON ADAPTER 40X1 18PK-4007 STRAIGHT FEMALE IRON ADAPTER 40X5/4 18PK-5008 STRAIGHT FEMALE IRON ADAPTER 50X6/4 18PK-6310 STRAIGHT FEMALE IRON ADAPTER 63X2 19PK-1605 PRESS FIT TO EUROCONE 16X3/4 19PK-2005 PRESS FIT TO EUROCONE 20X3/4 27PK-2626 45° BEND 26X26 27PK-3232 45° BEND 32X32 27PK-4040 45° BEND 40X40 27PK-5050 45° BEND 50X50 27PK-6363 45° BEND 63X63 28PK-2PK1604BP DOUBLE BACKPLATE 153MM CENTRS FOR ART. 2PK-1604 28PK-6PK1604BP DOUBLE BACKPLATE 153MM CENTRES FOR ART. 6PK-1604BP 8HNA-PK75 PRESSFITTING PK75-HN75

Approval Holder:

Henco Industries NV

Company Name

Henco Industries NV

Address

Toekomstlaan 27 HERENTALS

Postcode

2200

Country

Belgium

Phone

+3214285665

General Email

dirk.vroman@henco.be

View All Listings by this Company

Manufacturer:

Henco Industries NV

Company Name

Henco Industries NV

Address

Toekomstlaan 27 HERENTALS

Postcode

2200

Country

Belgium

Phone

+3214285665

General Email

dirk.vroman@henco.be

View All Listings by this Company