Directory Search Results

Print List

#2106319

Range of wall mounted, concealed, thermostatic shower blending valves incorporating stainless steel bodies, a 2-way ceramic disc headwork and a single lever operating member controlling the flow. The temperature is controlled independently via a thermostatic cartridge with a single lever incorporating a manual override operating member. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2106319
Note:
This approval does not include a shower hose and handset or overhead shower outlet.
Size:
½” BSP (F).
Marking:
QTOO (brand of D Line) on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
30/06/2026
Model:
QS3300 (concealed valve) which must be installed with the following operating member/trim sets: QA2290xxx (diverter control). QA2390xxx (thermostat control). Where xxx denotes the finish and can be replaced by 1 to 3 digits: M = brushed stainless steel finish. PP1 = polished PVD gunmetal finish.

Approval Holder:
D Line
Company Name
D Line
Address
Jylingevej 59, kld Copenhagen
Postcode
2720
Country
Denmark
Phone
+4572170138
General Email
rik@dline.com

View All Listings by this Company

Print This Approval


#2209328

Premix control unit for an infrared sensor tap comprising of a solenoid valve with plastic body, EPDM diaphragm and ‘O’-rings, and silicone seals. Both the cold and hot inlets incorporate an approved single check valve cartridge, however the complete assembly has not been tested for backflow protection. The central section of the valve incorporates a plastic strainer. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
2209328
Size:
½” BSP (M).
Marking:
QTOO (brand of D Line) on outer casing
Installation Requirements:
R001 R008 R010
Expiry date:
30/09/2027
Model:
QSF01
Product Images

Approval Holder:
D Line
Company Name
D Line
Address
Jylingevej 59, kld Copenhagen
Postcode
2720
Country
Denmark
Phone
+4572170138
General Email
rik@dline.com

View All Listings by this Company

Print This Approval


#2306532

'Yuhong PP-R Pipe GS'. Green coloured (with two, red lines) PP-R pipe manufactured by single screw extrusion. For use with water up to 70°C.

Section:
5260 Polypropylene
Section Subtitle:
Components.
WRAS Approval Number:
2306532
Expiry date:
30/06/2028

Approval Holder:
Oriental Yuhong Pipe Industry Technology Co., Ltd.
Company Name
Oriental Yuhong Pipe Industry Technology Co., Ltd.
Address
Room 202, Office Area, No. 6262, Australia Road, Tianjin Pilot Free Trade Zone (Dongjiang Free Trade Port)
Country
China

View All Listings by this Company

Print This Approval


#2305303

Range of wall mounted, electronically operated, combination tap assemblies (stainless steel body, various finishes - see model), comprising of a Premix control unit and a spout. The flow is controlled by a solenoid valve, (Premix control unit), which is actuated via an infrared sensor. The central section of the valve incorporates a plastic strainer. Both inlets of the Premix control unit incorporate an approved single check valve cartridge, however the complete assembly has not been tested for backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2305303
Note:
This product may not comply with the requirements of regulation 4(1)(b). Consult your local water undertaker prior to installation. R008 applies to the Premix control unit. The product is not supplied with any connecting hoses/pipework between the Premix control unit and the spout.
Size:
½” BSP (M) (to hot and cold inlets of solenoid).
Marking:
QTOO (brand of D Line) on spout trim.
Installation Requirements:
R001 R008 R010 R040 R570
Expiry date:
31/05/2028
Model:
QST3190xxx (190mm spout), QST3290xxx (250mm spout). Where xxx denotes the surface finish (which is a non-water contact part). It can be 1 to 3 digits, which can be any combination of numbers and/or letters. As examples: M = brushed stainless steel finish, PP1 = polished PVD gunmetal finish.
Product Images

Approval Holder:
D Line
Company Name
D Line
Address
Jylingevej 59, kld Copenhagen
Postcode
2720
Country
Denmark
Phone
+4572170138
General Email
rik@dline.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 3 of 3

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.