Range of resilient seated gate valves with blue epoxy coated ductile iron body and an EPDM coated ductile iron wedge. Maximum working pressure 16.0 bar. Maximum operating temperature 70°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

260304005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

DN size, PN rating, Brand logo, and BS 5163 on body.

Installation Requirements:

R001

Expiry date:

31/03/2031

Model:

CV-R101(N2): DN50, DN80, DN100, DN150, DN200, DN250, DN300 flanged. CV-R101L: DN350, DN400, DN450, DN500, DN600 flanged.

Approval Holder:

Shanghai Johnson Valve Industries Co Ltd

Company Name

Shanghai Johnson Valve Industries Co Ltd

Address

Suite 2511, Tower 3, 166 Minhong Road, Shanghai 201102, P.R.China

View All Listings by this Company

Range of press fit screw down stop valves with brass bodies and EPDM seals. For use with copper pipe to EN1057. Maximum working pressure 16.0 Bar Maximum operating temperature 85 °C.

Section:

2310 Valves

Section Subtitle:

Stop, metal, screw down.

WRAS Approval Number:

250512031

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm

Marking:

Masterflow 'MF' company logo, CR, PN16, size, WRAS and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

MCP34150000 & MCP34220000

Approval Holder:

Masterflow UK

Company Name

Masterflow UK

Address

Astley Park Estate, The Gatehouse, Kennedy Road, Astley, Manchester

Postcode

M29 7JY

View All Listings by this Company

Range of balancing valves with blue epoxy coated ductile iron bodies incorporating blue epoxy coated ductile iron (DN50~DN150) or stainless steel discs (DN200~DN300), EPDM gaskets and ‘O’-rings, handwheel operating member and a measuring port at each flanged end. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

260115002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50~DN300 flanged

Marking:

Brand logo (OTTO plus), model, WRAS, size, PN, material and production date (YYYY.MM) on data plate on body. ‘OTTO’ (brand of Barr Al Aman Int’l. Investment Co., Ltd.), PN, DN and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

OW-DRV-16Q

Approval Holder:

Barr Al-Amman International

Company Name

Barr Al-Amman International

Address

Sanibil Centre Azizia District Baladia Street Jeddah

Country

Saudi Arabia

Phone

+966 056 652 5154

General Email

hafiz@barralaman.com.sa

View All Listings by this Company

'Nav-Coat Bitumen Paint 001 Black'. Factory applied, black coloured bitumen coating. Apply as per manufacturer's product information sheet issued '10.07.2009'. Cure for 7 days@30°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

260155045

Expiry date:

31/01/2031

Approval Holder:

Nav Durga Chromatics Private Limited

Company Name

Nav Durga Chromatics Private Limited

Address

Jivan Nivas, 30A Block-R, New Alipore, 2nd Floor, Kolkata 700053

Country

India

Phone

+91 33 3254 6025/+91 98308 48300

General Email

navcoat@yahoo.co.in/navcoat@gmail.com

View All Listings by this Company

'BAJ0002'. Factory applied, blue coloured epoxy coating. Pre-heat substrate for 30 minutes@200°C and apply in accordance with manufacturer's Product Instructions 'Version-01 202426 September'. Cure for 10 minutes@200°C. For use with water up to 85°C. This material is only approved for the application and curing conditions that appear on the approval. If the application and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

251255018

Expiry date:

31/12/2030

Approval Holder:

Tian Jin Ai Yue Powder Coatings Co., Ltd.

Company Name

Tian Jin Ai Yue Powder Coatings Co., Ltd.

Address

No.188,JingChen Road, Jinghai District

Country

China

View All Listings by this Company