Range of spring loaded, resilient trim, non-return valves with, stainless steel bodies and plunger with EPDM seals. Maximum working pressure 16.0 bar. Cold water use only.

Section:

2185 Valves

Section Subtitle:

Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should not be made to `Backflow Prevention Devices`.

WRAS Approval Number:

250602711

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¼” - 4” BSP (F)

Marking:

Mondeo, flow arrow, size, pressure and date of manufacture (DD/MM/YY) on body

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Small DW 900103A 900106A 900110A 900112A 900117A 900120A Idrja DW 900010A 900400A 900015A 900410A 900020A 900420A 900025A 900430A 900028A 900440A 900056A 900451A 900461A 900471A Idrja DW MFA 900017MFA 900022MFA 900027MFA 900030MFA 900017FMA 900022FMA

Manufacturer:

Mondeo Srl.

Company Name

Mondeo Srl.

Address

STRADA DEL CAPITELLO SN MONTECCHIO MAGGIORE

Country

Italy

View All Listings by this Company

Flow through valve (chromium plated brass) for connection to expansion vessels. The product incorporates an isolation valve and a drain valve. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250604030

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (M) x 1” BSP (F).

Marking:

Global Water Solutions, model info and manufacturing date on adhesive label on body.

Installation Requirements:

R001 R511

Expiry date:

30/06/2030

Model:

IFP-100B - FlowThru Adaptor.

Approval Holder:

Global Water Solutions Ltd.

Company Name

Global Water Solutions Ltd.

Address

5th Floor, 37 Esplanade, St. Helier Jersey The Channel Islands

Postcode

JE1 2TR

Country

United Kingdom

Phone

+886 4 2622 0078

General Email

adam@globalwatersolutions.com

View All Listings by this Company

Range of commercial dish washing machines with flow controlled by a solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 4.0 bar. Cold water use only.

Section:

2390 Washing Machines

Section Subtitle:

Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2303402

Size:

¾” BSP(F) captive nut

Marking:

'FAGOR' Professional & logo & address. Model, date, & technical data on label plate

Installation Requirements:

R001 R574

Expiry date:

31/03/2028

Model:

WLP-62, WLP-63, WLP-70 & WLP-130

Approval Holder:

Onnera Group S. Coop

Company Name

Onnera Group S. Coop

Address

Santxo Lopegeti Auzoa 22 20560 Onati-Gipuzkoa

Country

Spain

View All Listings by this Company

Range of commercial dish washing machines. Flow is controlled by a solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure: 4.0 Bar. Maximum operating temperature: 60°C.

Section:

2390 Washing Machines

Section Subtitle:

Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

250402712

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

PVC bodied appliance hose with an EPDM inner liner incorporating a ¾” BSP (F) captive nut end connection.

Marking:

DC Products logo on control panel. DC Products logo, model name and other technical information on adhesive label on side of body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

ED50A, ED900A, SD40A, SXD40A, SD45A, SD50A, SXD45A, SXD50A, PG/PD40A, PG/PD45A, PG/PD50A, OG/OD40A, OG/OD50A, X600A, X700A, W700A, W1100, W1400A, W1400SA, SD900A, SD1000A, SD1300A, SD1350A, PD1000A, PD1300A, PD1350A, OD1400A, OD1425A, OD1450A, DC57-42A, DC57-62A, DC67A, DC109A. Key: SD = Standard series dish, SXD = Standard extra dish, ED = ECONOMY SERIES DISH, PG/PD = Premium series glass/Premium range dish, OG/OD = Optima series glass/dish W or X = washrite range. DC = Direct Catering Range (the numbers for the DC range also represent basket size). The number 40, 45 and 50 numbers relate to the basket size. The numbers 600, 700, 900, 1000, 1100, 1350, 1400 are arbitrary number or once related to the pump sizes. Any model that has the letter ‘A’ immediately after the model number signifies that the break tank has been fitted. Additional suffixes of varying character may be present after the letter ‘A’, e.g. ‘PD50A D’ List of available suffixes: BPI – boost pump CP – chemical pumps D – Drain pump DL – lock DP – detergent pump DR – Dryer HR – recovery IS – Softener LT – Light RDP – rinse and detergent pumps RP – rinse pump SW – Saniwash TD – thermos Disinfection UV – UV light. All the above models have the same pathway.

Approval Holder:

DC Products Ltd

Company Name

DC Products Ltd

Address

Unit 25 lodge hill Industrial Park Westbury Sub Mendip Somerset

Postcode

BA5 1EY

View All Listings by this Company

'Rubalit A 1896'. White coloured, dry-pressed ceramic disc. For use with water up to 85°C.

Section:

5023 Ceramic

Expiry date:

30/06/2030

Approval Holder:

CeramTec GmbH

Company Name

CeramTec GmbH

Address

Luitpoldstr. 15, 91207 Lauf

Country

Germany

Phone

+49 71536 11-0

General Email

info@ceramtec.de

View All Listings by this Company