'MasterSeal P693/94Primer and MasterSeal M 649 (formerly known as MasterSeal 694) Coating'. Factory applied, grey coloured (once mixed), two-component primer (non-water contact primer) and two-component coating (water contact coating). Mix and apply 'MasterSeal P693/94Primer’ as per Technical Data Sheet ‘MBS_CC-UAE/Sl_P_693/694_06_22’. Cure for 2 hours@25°C. Then mix and apply ‘MasterSeal M 649 Coating' as per Technical Data Sheet ‘MBS_CC-UAE/Sl_M 649_06_21/v1/08_21/v2/06_22/v3/10_22’. Cure for 1 minute@25°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2106556

Expiry date:

30/06/2026

Approval Holder:

Master Builders Solutions Construction Chemicals LLC.

Company Name

Master Builders Solutions Construction Chemicals LLC.

Address

Dubai Investment Park 1 Street No. 38 P.O. Box 37127 Dubai

Country

United Arab Emirates

Phone

+971 48090800

View All Listings by this Company

'Sung Il & GRP ENM Tank Panel'. Light grey coloured, hot pressed GRP panel. For use with water up to 50°C.

Section:

5120 Glass Reinforced Plastics (GRP)

Section Subtitle:

Components.

WRAS Approval Number:

2104559

Expiry date:

30/04/2026

Approval Holder:

Sung Il Co., Ltd.

Company Name

Sung Il Co., Ltd.

Address

20, Gimhae-daeno 1031 beon-gil, Halim-myeon, Gimhae-si, Gyeongsangnam-do

Country

Korea, Republic of

View All Listings by this Company

'Pipeco Korea Tank Panel'. Light grey coloured, hot pressed GRP panel. For use with water up to 50°C.

Section:

5120 Glass Reinforced Plastics (GRP)

Section Subtitle:

Components.

WRAS Approval Number:

2104560

Expiry date:

30/04/2026

Approval Holder:

Pipeco Korea

Company Name

Pipeco Korea

Address

43, Gimhae-daero 1031beon-gil, Hallim-myeon, Gimhae-si, Gyeongsangnam-do

Country

Korea, Republic of

View All Listings by this Company

'Sangwon GRP Water Tank Panel'. Light grey coloured, hot pressed GRP panel. For use with water up to 50°C.

Section:

5120 Glass Reinforced Plastics (GRP)

Section Subtitle:

Components.

WRAS Approval Number:

2104561

Expiry date:

30/04/2026

Approval Holder:

Sangwon Eng. Co. Ltd.

Company Name

Sangwon Eng. Co. Ltd.

Address

675, Gomo-ro, Jillye-myeon, Gimhae-si, Gyeongsangnam-do

Country

Korea, Republic of

View All Listings by this Company

'Myungjin GRP Water Tank Panel'. Light grey coloured, hot pressed GRP panel. For use with water up to 50°C.

Section:

5120 Glass Reinforced Plastics (GRP)

Section Subtitle:

Components.

WRAS Approval Number:

2104562

Expiry date:

30/04/2026

Approval Holder:

Myungjin Tech. Co. Ltd.

Company Name

Myungjin Tech. Co. Ltd.

Address

675, Gomoro, Jinryemyeon, Gimhae City, Gyeongsangnam-do

Country

Korea, Republic of

View All Listings by this Company

"Reinert-Ritz PE 100 Fittings". Black coloured, extruded polyethylene fittings. For use with water up to 85°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

2102543

Expiry date:

28/02/2026

Approval Holder:

Reinert-Ritz GmbH

Company Name

Reinert-Ritz GmbH

Address

Ernst-Heinkel-Strasse 2 48531 Nordhorn

Country

Germany

Phone

+49 (0) 5921 8347-0

General Email

contact@reinert-ritz.com

View All Listings by this Company

'LL 8460.29'. Natural (appears white and opaque) LLDPE material manufactured by rotational moulding. For use with water up to 85°C.

Section:

5245 Polyethylene

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2108545

Expiry date:

31/08/2026

Approval Holder:

JL Goor Materials Ltd.

Company Name

JL Goor Materials Ltd.

Address

Plaza 212. Blanchardstown Corporate Park, Ballycoolin, Dublin 15, D15 W5XW

Country

Ireland

View All Listings by this Company

'EPDM G7503'. Black coloured, injection moulded EPDM rubber material. Shore hardness 75. Tested in-radius size 1.1mm. For use with water up to 50°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2105527

Expiry date:

31/05/2026

Approval Holder:

Jeantet Elastomers

Company Name

Jeantet Elastomers

Address

6 Faubourge Des Moulins, BP 117, 39206 Saint Claude Cedex

Country

France

Phone

(33) 03 84 45 03 57 Fax: +33 3 8445 6666

General Email

jeantet@jeantet.com

View All Listings by this Company

'XR0240012'. Black coloured, compression moulded EPDM material. Shore hardness 40. Tested in-radius size 1.5mm. For use with water up to 85°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2111541

Expiry date:

30/11/2026

Approval Holder:

Changtai Sinrun Rubber-Plastic Co. Ltd.

Company Name

Changtai Sinrun Rubber-Plastic Co. Ltd.

Address

Xingtai Development Zones, Changtai county, Zhangzhou, Fujian Province

Country

China

View All Listings by this Company

'EPDM 69064340'. Black coloured, injection moulded EPDM sheet material. Shore hardness 57. Tested in-radius size 0.9mm. For use with water up to 23°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2109564

Expiry date:

30/09/2026

Approval Holder:

Trelleborg Pipe Seals

Company Name

Trelleborg Pipe Seals

Address

Pascallaan 80, 8218NJ Lelystad

Country

Netherlands

View All Listings by this Company