Range of single hole, single outlet, swivel, combination tap assemblies (brass bodies - various finishes). Incorporating a ceramic cartridge headwork with various operating members. The spout outlet incorporates a plastic aerator. Model BLS4ZZX is supplied with a pop-up waste – not verified by test. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250902012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided (TPSiV) lined flexible hose assemblies incorporating 3/8" BSP female adapters.

Marking:

WATERWORKS on escutcheon.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Model:

BKM4ZZX BLS4ZZX Followed by the legend of the type of lever/handle and surface finish. Suffix options: ZZ = represents handle components 0 Less Handles 1 Cross Handle 2 Two‐Tone Cross Handle 3 Coin Edge Cross Handle 10 Solo Series Lever Handle 11 Lever Handle 12 Two‐Tone Lever Handle 13 Coin Edge Lever Handle 14 Walnut Lever Handle 15 Leather Lever Handle 20 Solo Series Straight Lever Handle 2A Tandem Series Guilloche Lines Lever Handle 2B Tandem Series Two‐Tone Lever Handle 2C Union Series Guilloche Link Lever Handle 2D Union Series Enamel Guilloche Lines Lever Handle 2E Union Series Guilloche Pinstripe Lever Handle 2P Solo Series Two‐Piece Straight Lever Handle 2S Bond Rally Series Lever Handle 2T Teak Lever Handle 30 Solo Series Knob Handle 3S Bond Rally Series Knob Handle 4A Tandem Series Guilloche Lines Knob Handle 4B Tandem Series Two‐Tone Guilloche Knob Handle 4D Union Series Enamel Guilloche Lines Knob Handle 5C Union Series Guilloche Link Knob Handle 7A Tandem Series Guiloche Lines Lever handles with Gland Cover 7B Tandem Series Two Tone Lever handles with Gland Cover 7C Union Series Guiloche Link Lever handles with Gland Cover 7D Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P Solo Series Two Piece Straight Lever handle with Gland Cover 7S Bond Rally Series Lever Handle with Gland Cover 7T Tandem Series Teak lever with Gland Cover 8Z Straight Lever Handle 90 Solo Series Straight Lever handles with Gland Cover X = represents External Color or Finish Options AC Antique Copper AB Architectural Bronze AQB Antique Brass BZ Architectural Bronze C Polished Chrome CO Concordia DN Dark Nickel G Gold L Lumin M Matte Nickel MC Matte Chrome MG Matte Gold MS Matte Silver N Polished Nickel S Silver SC Shiny Copper SO Sovereign UB Unlacquered Brass

Product Images

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London WC1N2EB

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes). Incorporating quarter turn ceramic disc or ceramic cartridge headworks and single lever or cross top operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 Bar Maximum operating temperature 70.0°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250902035

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hoses incorporating 1/2" BSP (F) captive nut end connections.

Marking:

ST JAMES logo on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Model:

5004 Range (2 Different colour finish) 5004BF 5004CM 5005 Range (5 Different colour finish) 5005B 5005BB 5005BC 5005BF 5005CM 5006 Range (5 Different colour finish) 5006B 5006BB 5006BC 5006BF 5006CM 5007 Range (5 Different colour finish) 5007B 5007BB 5007BC 5007BF 5007CM 580381 Instantor Pro Variants 580077 BF = Brushed Chrome Finish, CM = Chrome Finish, B = Brushed Black Finish, BB = Brushed Brass Finish, BC = Brushed Red Gold Finish.

Product Images

Approval Holder:

Sanbra Fyffe

Company Name

Sanbra Fyffe

Address

Santry Avenue, Santry, Dublin, D09 K160

Country

Ireland

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates plastic flow straighteners. The products are supplied with a 15x15mm compression single check valve assembly (suitable for backflow protection against Fluid Category 2) which also incorporates an isolation valve, intended for installation at each inlet. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

240903019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections x 15mm compression

Marking:

Bristan on the handle

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2029

Model:

TAP1119

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

241203018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Range of stainless steel braided EPDM or PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections

Marking:

Bristan on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/12/2029

Model:

TAP1102

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes, see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250912011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.

Marking:

LOTA on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Model:

63853-00X, 63854-00X. X denotes finish and can be replaced with: 0111 - Chrome 3+, 6801 - Matt Black, 4408 - Brushed Brass, 08 - Stainless Steel, 5806 - Gun Metal, 0402 - Brushed Nickel PVD., 04 - Brushed Nickel.

Product Images

Approval Holder:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Manufacturer:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company