Directory Search Results

Fittings Materials
Print List

#2107098

Range of hand wash and dryer units The flow is controlled by a solenoid valve activated via an infra-red sensor. The products are supplied with a non-verifiable double check valve assembly (suitable for backflow protection against Fluid category 3) for installation on the inlet. The double check valve assembly also incorporates a drain port, (located in between the cartridges), and an integral spherical valve. Maximum working pressure 10.0 bar. Maximum operating temperature 50ºC.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2107098
Note:
R008 applies to the solenoid valves and stainless steel braided PEX lined flexible hose assemblies.
Size:
15mm compression
Marking:
Wallgate on face cover. Wallgate, model, serial number, date of manufacture (DD/MM/YY) and other product info on label on control panel.
Installation Requirements:
R001 R008 R040 R570
Expiry date:
31/07/2026
Model:
Thrii-SS (Solid Surface fascia), Thrii-DIS-SS (Disabled design, Solid Surface fascia), Thrii-ST (Stainless Steel fascia), Thrii-CW-SS (Cold water only, Solid Surface fascia - instantaneous water heater removed), Thrii-CW-ST (Cold water only, Stainless Steel fascia - instantaneous water heater removed), Thrii-DIS-CW-SS (Disabled design, Cold water only, Solid Surface fascia - instantaneous water heater removed), Thrii-ST-RA (Stainless Steel fascia – Rear Access), Thrii-SS-RA (Solid Surface fascia – Rear Access), Thrii-Marine.
Product Images
Approval Holder:
Wallgate Ltd.
Company Name
Wallgate Ltd.
Address
Crow Lane, Salisbury
Postcode
SP2 0HB
Country
United Kingdom
Phone
01722 702058
General Email
jmarshall@wallgate.com

View All Listings by this Company
Manufacturer:
Wallgate Ltd.
Company Name
Wallgate Ltd.
Address
Crow Lane, Salisbury
Postcode
SP2 0HB
Country
United Kingdom
Phone
01722 702058
General Email
jmarshall@wallgate.com

View All Listings by this Company

Print This Approval

#2109035

Range of flow and temperature sensors with stainless steel bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

Section:
1530 Miscellaneous Fittings
Marking:
Droople & flow arrow on body
Installation Requirements:
R001
Expiry date:
30/09/2026
Model:
SAR-FT-BSP-MM12, SAR-FT-BSP-MM34 & SAR-FT-BSP-MM1.
Product Images
Approval Holder:
Droople SA
Company Name
Droople SA
Address
Route du Verney 18, 1070 Puidoux
Country
Switzerland

View All Listings by this Company

Print This Approval

#2109321

Range of circulation fittings with gun metal bodies, plastic cones & guides and EPDM ‘O’ rings. The products incorporate a dynamic venturi valve. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:
1530 Miscellaneous Fittings
Size:
see model
Marking:
Kemper’s logo, flow arrow, DN and PN on body.
Installation Requirements:
R001
Expiry date:
30/09/2026
Model:
6501001500 - DN15 x ½” BSP (F) 6501002000 - DN20 x ¾” BSP (F) 6501002500 - DN25 x 1” BSP (F) 6501003200 - DN32 x 1 ¼” BSP (F) 6501004000 - DN40 x 1 ½” BSP (F) 6501005000 - DN50 x 2” BSP (F) 6502001500 - DN15 x ½” BSP (F) 6502002000 - DN20 x ¾” BSP (F) 6502002500 - DN25 x 1” BSP (F) 6502003200 - DN32 x 1 ¼” BSP (F) 6502004000 - DN40 x 1 ½” BSP (F) 6502005000 - DN50 x 2” BSP (F) 6501201500 - DN15 x ¾” BSP (M) 6501202000 - DN20 x 1” BSP (M) 6501202500 - DN25 x 1 ¼” BSP (M) 6501203200 - DN32 x 1 ½” BSP (M) 6501204000 - DN40 x 1 ¾” BSP (M) 6501205000 - DN50 x 2 3/8” BSP (M)
Product Images
Approval Holder:
Gebr. Kemper GmbH + Co. KG
Company Name
Gebr. Kemper GmbH + Co. KG
Address
Harkortstr. 5 57462 Olpe Germany
Phone
+49(0) 27618910
General Email
info@kemper-olpe.de

View All Listings by this Company

Print This Approval

#2107073

Range of booster pumps with stainless steel bodies and impellers (AISI 304: AL-RED models or AISI 316: CP models), EPDM ‘O’-rings and a ceramic/graphite/EPDM shaft seal. Maximum working pressure: CP(m) 100-130-132-150-158 and AL-RED(m) 600-610-620 models: 6.0 bar. All other models: 8.0 bar. Maximum operating temperature 90°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2107073
Size:
1 ¼” BSP (F).
Marking:
Pedrollo, made in Italy, production date and information (YY/production line: number or letter/DDD), maximum temperature and other technical information on data plate on body.
Installation Requirements:
R001 R415
Expiry date:
31/07/2026
Model:
Single phase (CPm or AL-REDm) or three phase (CP or AL-RED): CP(m) 100-ST4. CP(m) 130-ST4. CP(m) 132-ST4. CP(m) 150-ST4. CP(m) 158-ST4. CP(m) 170-ST4. CP(m) 170M-ST4. CP(m) 180-ST4. CP(m) 190-ST4. CP(m) 200-ST4. CP(m) 100-ST6. CP(m) 130-ST6. CP(m) 132-ST6. CP(m) 150-ST6. CP(m) 158-ST6. CP(m) 170-ST6. CP(m) 170M-ST6. CP(m) 180-ST6. CP(m) 190-ST6. CP(m) 200-ST6. AL-RED(m) 600 -4. AL-RED(m) 610 -4. AL-RED(m) 620 -4. AL-RED(m) 650 -4. AL-RED(m) 660 -4. AL-RED(m) 670 -4. AL-RED(m) 650M -4. AL-RED(m) 660M -4. AL-RED(m) 670M -4. AL-RED(m) 650L -4. AL-RED(m) 660L -4. AL-RED(m) 670L -4. AL-RED(m) 600 -6. AL-RED(m) 610 -6. AL-RED(m) 620 -6. AL-RED(m) 650 -6. AL-RED(m) 660 -6. AL-RED(m) 670 -6. AL-RED(m) 650M -6. AL-RED(m) 660M -6. AL-RED(m) 670M -6. AL-RED(m) 650L -6. AL-RED(m) 660L -6. AL-RED(m) 670L -6.
Product Images
Approval Holder:
Pedrollo S.p.A.
Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Country
Italy
Phone
+39 045 6136311
General Email
vendite@pedrollo.com

View All Listings by this Company
Manufacturer:
Pedrollo S.p.A.
Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Country
Italy
Phone
+39 045 6136311
General Email
vendite@pedrollo.com

View All Listings by this Company

Print This Approval

#2105052

Single pump units with plastic bodies and impellers, EPDM ‘O’-rings, expansion vessel with an EPDM membrane and a carbon graphite/ceramic/NBR shaft seal (bt-ar 13 bx 4ff xp). Each pump inlet incorporates a non-return valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2105052
Size:
1” BSP (M) to pump. 1½” BSP (F) to manifold (twin models only).
Marking:
wilo on body. Wilo, Model, WRAS, PN & max temp
Installation Requirements:
R001 R415
Expiry date:
31/05/2026
Model:
SINGLE PUMP BOOSTER SET: Isar BOOST5-E-3 (WILO) & Isar BOOST5-E-3-G (WILO)- single pump, size 3 m³/h (50l/min). SINGLE PUMP BOOSTER SET: Isar BOOST5-E-5 (WILO) & Isar BOOST5-E-5-G (WILO) -single pump, size 5 m³/h (83.33l/min).
Product Images
Approval Holder:
Wilo SE.
Company Name
Wilo SE.
Address
Nortkirchenstraße 100, 442363, Dortmund
Country
Germany

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 195 of 1559

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.