Range of water meters with brass bodies, plastic turbines and EPDM washers. Inlets incorporate a plastic filter. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 50°C

Section:

1505 Water Meters

Size:

DN15 – DN 40 - ¾” – 2” Male BSP, DN 50 – DN50 Flange.

Marking:

Genebre and other technical info on meter face. Size and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/12/2027

Model:

6029 – ¾” BSP (M), 1” BSP (M), 1 ¼” BSP (M), 1 ½” BSP (M), 2” BSP (M), DN 50.

Approval Holder:

Genebre, S.A

Company Name

Genebre, S.A

Address

Avinguda Joan Carles I, 46 – 48, Edificio GENEBRE Hospitalet de Llobregat

Postcode

08908

Country

Spain

Phone

(+34) 93 298 80 00

General Email

cazorla@genebre.es

View All Listings by this Company

Range of water meters with either cast iron (blue epoxy coated) or stainless-steel bodies, transducers and EPDM rubber O-rings. Maximum working pressure 25.0 Bar. Maximum operating temperature 50.0°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Flanged - DN40 to DN100.

Marking:

Hidroconta, NAUTILUS and product information on face.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

NAUTILUS

Approval Holder:

Hidroconta S.A.

Company Name

Hidroconta S.A.

Address

Ctra Santa Catalina 60 30012 Murcia Spain

General Email

ivan@hidroconta.com

View All Listings by this Company

Range of inline water meters with either brass or plastic bodies incorporating EPDM ‘O’-rings and can be provided with a plastic strainer. Maximum working pressure 16 Bar Cold water use.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP male inlets and outlets.

Marking:

DIEHL Metering, PN and other technical information on meter face. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

ALTAIR V4 IS (Brass Body) ALTAIR V4 IS (Plastic Body) ALTAIR V4 (Brass Body) ALTAIR V4 (Plastic Body)

Manufacturer:

Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.

Company Name

Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.

Country

View All Listings by this Company

Bias chamber incorporating an EPDM diaphragm and ‘O’-ring with a brass body. Maximum working pressure 35.0 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

7/8-14 UNF male

Marking:

Technolog & product info on label.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

CGF03S06

Product Images

Manufacturer:

Technolog Limited

Company Name

Technolog Limited

Address

Ravenstor Road Wirksworth

Postcode

DE4 4FY

Country

United Kingdom

Phone

01629 823611

View All Listings by this Company

Range of Fastec® F13 and Fastec® F14 fittings for use with Fastec® manifold assemblies, incorporated with brass bodies and EPDM O-rings. To be used with copper pipe complying with BS EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

Teco logo etched on body; F13 or F14, Year and batch/month No. (YYMM) on body

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

Fastec® F13 Elbow DN2105503 F13 Fastec fitting 90° M/F DN15 DN2105504 F13 Fastec fitting 90° F/F DN15 Tee DN2105507 F13 Fastec fitting M/F/F DN15 DN2105508 F13 Fastec fitting F/F/F DN15 2 way DN2105510 F13F Fastec splitter DN15 Straight DN2105531 F13 Fastec nipple M/M DN15 DN2105691 F13 Fastec cap Kit DN15 DN2208098 Fastec cap F13F DN15 DN2208080 Fastec fitting F13F DN15 DN2208081 Fastec Fitting extender F13F DN15 Fastec® F14 Elbow DN2208065 F14 Fastec Fitting 90° MF DN20 DN2208066 F14 Fastec Fitting 90° FF DN20 Tee DN2208067 F14 Fastec Fitting 90° MFF DN20 DN2208069 F14 Fastec Fitting 90° FFF DN20 Straight DN2410738 Fastec Fitting extender F14F DN20 DN2410737 Fastec Fitting F14F DN20 DN2208085 Fastec nipple F14M DN20 DN2208099 Fastec cap F14F DN20 DN2208087 Plug fastec F14M DN20 DN2208094 Fastec fitting F13M/F14M DN15

Product Images

Manufacturer:

TECO Srl

Company Name

TECO Srl

Address

Via Sandro Pertini n.39/41 25050 Provaglio d'Iseo (BS)

Country

Italy

View All Listings by this Company

Range of flexible joints incorporating an EPDM (inner & outer) joint with a steel reinforcing ring and two carbon steel flanges. Maximum operating pressure 16.0 bar. Maximum operating temperature 65°C.

Section:

1530 Miscellaneous Fittings

Size:

DN32 - DN150 flange

Marking:

DST Group on adhesive label on body DN, PN & YY/MM etched on body

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

PF16W032 PF16W040 PF16W050 PF16W065 PF16W080 PF16W100 PF16W125 PF16W150

Approval Holder:

DST Group Ltd

Company Name

DST Group Ltd

Address

Piksa House 2 Penrod Way Heysham Lancashire

Postcode

LA3 2UZ

Phone

01524 389 494

View All Listings by this Company

Water hammer arrestor with brass body and EPDM ‘O’ ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Pegler 62 WHA on adhesive label on body Pegler logo, temperature and pressure cast on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

PEG62

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

‘UPM10’ and ‘UPM20’ range of circulator pumps with a stainless-steel body, plastic impellor and EPDM ‘O’-rings. The product is supplied with EPDM gaskets for the inlet and outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241207701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP (M) inlet/outlet.

Marking:

Grundfos and Grundfos logo, type and model on nameplate on motor housing. P/N no., P/C no., Serial (S/N) no., technical info, manufacturing country and data matrix on end of motor housing. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

UPM 10M 25-95 N 180, UPM 10L 25-105 N 180, UPM 10XL 25-125 N 180, UPM 20S 25-145 N 180. Where: Pump type: UPM 10M, UPM 10L, UPM 10XL, UPM 20S. Control variant: []: PWM, LIN: LIN bus input signal, 0-10V, AUTO, HYBRID, SOLAR, DHW. Nominal diameter: 25: G 1½”. Max. Head: 95: 9.5m, 105: 10.5m, 125: 12.5m, 145: 14.5m. Designation/Pump housing: N 180: Stainless steel body, 180mm port to port length. Control box orientation: 3: 3 o’clock (right), 6: 6 o’clock (below), 9: 9 o’clock (left). Customer code: XXX (no impact on water contact parts).

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241002722

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

P 3S & U 5S models: 1” BSP (F) inlet x 1” BSP (F) outlet. P 7S models: 1¼” BSP (F) inlet x 1” BSP (F) outlet. P 9S models: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. P 18S models: 2” BSP (F) inlet x 1½” BSP (F) outlet.

Marking:

Foras (Brand of Pentax), model code and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

P range: P X(S) - XX/Y (T) Where: P = pump model X = Nominal flow-rate m³/h (3, 5, 7, 9, 18 see model list), S = ULTRA S range - stainless steel hydraulic part, XX = nominal power HPx100 (50 - 400 see model list), Y = Number of impellers (2 - 7 see model list), T = 3 phase, [blank] = single phase. P 3S models: P 3S-50/2; P 3S-70/3; P 3S-90/4; P 3S-100/5; P 3S-120/6; P 3S-150/7. P 5S models: P 5S-70/2; P 5S-80/3; P 5S-120/4; P 5S-150/5; P 5S-180/6; P 5S-200/7. P 7S models: P 7S-100/2; P 7S-120/3; P 7S-180/4; P 7S-250/5; P 7S-300/6. P 9S models: P 9S-100/2; P 9S-150/3; P 9S-200/4; P 9S-250/5. P 3S models: P 3S-50/2 T; P 3S-70/3 T; P 3S-90/4 T; P 3S-100/5 T; P 3S-120/6 T; P 3S-150/7 T. P 5S models: P 5S-70/2 T; P 5S-80/3 T; P 5S-120/4 T; P 5S-150/5 T; P 5S-180/6 T; P 5S-200/7 T. P 7S models: P 7S-100/2 T; P 7S-120/3 T; P 7S-180/4 T; P 7S-250/5 T; P 7S-300/6 T; P 7S-350/7 T. P 9S models: P 9S-100/2 T; P 9S-150/3 T; P 9S-200/4 T; P 9S-250/5 T. P 18S models: P 18S-180/2 T; P 18S-250/3 T; P 18S-400/4 T.

Approval Holder:

PENTAX INDUSTRIES SpA

Company Name

PENTAX INDUSTRIES SpA

Address

Viale dell’Industria 1 Veronella

Postcode

37040

Country

Italy

Phone

+39 0442 489567

General Email

g.cengia@pentax-pumps.it

View All Listings by this Company

Range of shower booster pumps (either single or double) with acetal bodies and impellers and EPDM seals and NBR `O` rings. Supplied with stainless-steel braided EPDM lined flexible hoses incorporating isolation valves Please refer to model for maximum operating pressure. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250304714

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm pushfit

Marking:

Stuart Turner and product info label

Installation Requirements:

R001 R415

Expiry date:

31/03/2030

Model:

Maximum working pressure 3.8 bar: 47342 Showermate S1.5 bar Twin. 47343 Showermate S2.0 bar Twin. 44925 Showermate S2.0 bar Twin. 44923 Showermate S2.0 bar Single. 44924 Showermate S1.5 bar Twin. 47340 Showermate S2.0 bar Single. Maximum working pressure 4.0 bar: 47341 Showermate S2.6 bar Single. 44920 Showermate S2.6 bar Twin. 44919 Showermate S2.6 bar Single. 47344 Showermate S2.6 bar Twin.

Product Images

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company