Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #241002724

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241002724
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:: CWMA3 & CWMA5 : 1” BSP (F) inlet x 1” BSP (F) outlet. CWMA7 : 1¼” BSP (F) inlet x 1” BSP (F) outlet. CWMA9 : 1½” BSP (F) inlet x 1¼” BSP (F) outlet. CWMA18 : 2” BSP (F) inlet x 1½” BSP (F) outlet.
Marking:: Winflo logo, model code and product technical information on data-plate.
Installation Requirements:: R001 R415
Expiry date:: 31/10/2029
Model:: CMWA range model code: CMWAXX-Y(T) CMWA = Pump type. XX = Nominal flow rate m/3 per hour (3, 5, 7, 9 or 18). Y = Number of impellers. T = 3 phase or (blank) = single phase. CMWA3-2, CMWA3-3, CMWA3-4, CMWA3-5, CMWA3-6 & CMWA3-7. CMWA5-2, CMWA5-3, CMWA5-4, CMWA5-5, CMWA5-6 & CMWA5-7. CMWA7-2, CMWA7-3, CMWA7-4, CMWA7-5 & CMWA7-6. CMWA9-2, CMWA9-3, CMWA9-4 & CMWA9-5. CMWA3-2T, CMWA3-3T, CMWA3-4T, CMWA3-5T, CMWA3-6T & CMWA3-7T. CMWA5-2T, CMWA5-3T, CMWA5-4T, CMWA5-5T, CMWA5-6T & CMWA5-7T. CMWA7-2T, CMWA7-3T, CMWA7-4T, CMWA7-5T, CMWA7-6T & CMWA7-7T. CMWA9-2T, CMWA9-3T, CMWA9-4T & CMWA9-5T. CMWA18-2T, CMWA18-3T & CMWA18-4T.

Approval Holder:: Eautechnik GmbH

Company Name
Eautechnik GmbH
Country
Germany

View All Listings by this Company

WRAS Approval Number: #250702722

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250702722
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: U3, U5, P3 or P5: 1” BSP (F) inlet x 1” BSP (F) outlet. U7 or P7: 1¼” BSP (F) inlet x 1” BSP (F) outlet. U9 or P9: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U18 or P18: 2” BSP (F) inlet x 1½” BSP (F) outlet.
Marking:: Ultra Models: Pentax logo and other technical data on data plate on body. Plus Models: Foras logo (brand of Pentax SpA) and other technical data on data plate on body
Installation Requirements:: R001 R415
Expiry date:: 31/07/2030
Proviso:: The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Model:: ULTRA range: U 3 – XX/Y, U 5 – XX/Y, U 7 – XX/Y, U 9 – XX/Y, U 3 – XX/Y T, U 5 – XX/Y T, U 7 – XX/Y T, U 9 – XX/Y T, U 18 – XX/Y T. PLUS range: P 3 – XX/Y, P 5 – XX/Y, P 7 – XX/Y, P 9 – XX/Y, P 3 – XX/Y T, P 5 – XX/Y T, P 7 – XX/Y T, P 9 – XX/Y T, P 18 – XX/Y T. Where: U or P = model type. U = ULTRA, P = PLUS. 3/5/7/9/18 = nominal flow rate in m³/h. XX = nominal power HPx100. U3 or P3 (single or three phase): 50-150. U5 or P5 (single or three phase): 70-200. U7 or P7 (single phase): 100-300. U7 or P7 (three phase): 100-350. U9 or P9 (single or three phase): 100-250. U18 or P18 (three phase only): 180-400. Y = Number of impellers. U3, U5, P3 or P5 (single or three phase): 2-7 stages. U7 or P7 (single phase): 2-6 stages. U7 or P7 (three phase): 2-7 stages. U9 or P9 (single or three phase): 2-5 stages. U18 or P18 (three phase only): 2-4 stages. Blank or T = motor: blank = single phase, T = 3 phase

Approval Holder:: PENTAX INDUSTRIES SpA

Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Country
Italy
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company
Manufacturer:: PENTAX INDUSTRIES SpA

Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Country
Italy
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company

WRAS Approval Number: #250714302

Section:: 1650 Shower Outlets
Description:: A Range of Shower head(s) and/or shower handset(s).
HS183 and HS3013 shower handset. HS2018 and HS2019 overhead shower outlet.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R040
Expiry date:: 31/07/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
HS183 XXX	VARIOUS	1/2" BSP	N/A bar	85 °C	PPI	ON BODY	No	Not applicable	Not Applicable	Not Applicable
HS2019 XXX	VARIOUS	1/2" BSP	N/A bar	85 °C	PPI	ON BODY	No	Not applicable	Not Applicable	Not Applicable
HS2018 XXX	VARIOUS	1/2" BSP	N/A bar	85 °C	PPI	ON BODY	No	Not applicable	Not Applicable	Not Applicable
HS3013 XXX	VARIOUS	1/2" BSP	N/A bar	85 °C	PPI	ON BODY	No	Not applicable	Not Applicable	Not Applicable

Notes & Further Information: XXX Denotes the following: First, second & third different finishes: Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Approval Holder:: PPI Xiamen Industry Co., Ltd.

Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturers:: PPI XIAMEN INDUSTRY CO LTD

WRAS Approval Number: #241002109

Range of flanged `Y` patterned in-line strainers with blue, black or red epoxy coated ductile iron bodies, stainless steel mesh. Maximum working pressure 16 Bar. Maximum operating temperature 85°C.

Section:: 1715 Strainers
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN40 – DN600
Marking:: IVAL & Logo, DN & PN on body. Adhesive label: showing the brand, size, description, temperature etc. Flow arrow.
Installation Requirements:: R001
Expiry date:: 31/10/2029
Model:: S70

Approval Holder:: IVAL Hydronics UK Ltd

Company Name
IVAL Hydronics UK Ltd
Address
71-75 Shelton Street, Covent Garden, London.
Postcode
WC2H 9JQ
Country
United Kingdom
General Email
info@ival-hydronics.co.uk

View All Listings by this Company

WRAS Approval Number: #250702048

Range of draining taps, straight or elbowed with brass bodies incorporating a rising spindle headwork. Maximum working pressure 10.0 Bar Maximum operating temperature 95.0°C

Section:: 1770 Taps
Section Subtitle:: Draining, for above ground use only.
WRAS Approval Number:: 250702048
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: IDC E logo and size on body. size and EN number on nut
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: BF8712 Elbow Drain off Mi x C Compression x Male 3/4”Mx 21mm BF8713 Elbow Drain off Mi x C Compression x Male 1”M x 27.4mm BF4712 Elbow Drain off compression 21mm x 21mm BF4713 Elbow Drain off compression 27.4mm x 27.4mm BF1711 Straight Drain off compression 14.7mm x 14.7mm BF1712 Straight Drain off compression 21mm x 21mm BF1713 Straight Drain off compression 27.4mm x 27.4mm

Approval Holder:: IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company
Manufacturer:: Zhejiang IDC Fluid Control Co Ltd

Company Name
Zhejiang IDC Fluid Control Co Ltd
Address
Machinery Industrial Park Zhugang Town Yuhuan County
Country
Zhejiang
General Email

View All Listings by this Company