Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250704707

Range of shock arrestors with a stainless-steel body and EPDM liner. The compression connection of the X2041.015 model is for use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: X2041.015: 15mm compression, X2040.G15: ½” BSP (M).
Marking:: Zhejiang Fansheng Fluid Control Co., Ltd logo on body
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: X2041.015, X2040.G15.

Approval Holder:: Zhejiang Fansheng Fluid Control Co., Ltd.

Company Name
Zhejiang Fansheng Fluid Control Co., Ltd.
Postcode
317605
Country
China
Phone
+86 576 8746 0061
General Email
info@IVANCI.com

View All Listings by this Company

WRAS Approval Number: #250704708

Shock arrestors with a copper body, plastic shuttle and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: WHA-G12M-LL: ½” BSP (M), WHA-G34M-LL: ¾” BSP (M), WHA-G1M-LL: 1” BSP (M), WHA-AM-LL: ½” NPT (M), WHA-BM-LL: ¾” NPT (M), WHA-CM-LL: 1” NPT (M).
Marking:: Yongtong logo, Yongtong, part # (model), size (A, B or C), water hammer arrestor, WRAS and made in China on adhesive label on body.
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: WHA-G12M-LL: 1/2” G Male Water Hammer Arrester, A, WHA-G34M-LL: 3/4” G Male Water Hammer Arrester, B, WHA-G1M-LL: 1” G Male Water Hammer Arrester, C, WHA-AM-LL: 1/2” MIP Water Hammer Arrester, A, WHA-BM-LL: 3/4” MIP Water Hammer Arrester, B, WHA-CM-LL: 1” MIP Water Hammer Arrester, C.

Approval Holder:: Taizhou Yongtong Brass Industry Co., Ltd.

Company Name
Taizhou Yongtong Brass Industry Co., Ltd.
Address
50 Keyuanbei Road, Qinggang, Yuhuan, Zhejiang
Country
China
Phone
+86 0576-87105707
General Email
j.luo@yongtongbrass.com

View All Listings by this Company

WRAS Approval Number: #241002724

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241002724
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:: CWMA3 & CWMA5 : 1” BSP (F) inlet x 1” BSP (F) outlet. CWMA7 : 1¼” BSP (F) inlet x 1” BSP (F) outlet. CWMA9 : 1½” BSP (F) inlet x 1¼” BSP (F) outlet. CWMA18 : 2” BSP (F) inlet x 1½” BSP (F) outlet.
Marking:: Winflo logo, model code and product technical information on data-plate.
Installation Requirements:: R001 R415
Expiry date:: 31/10/2029
Model:: CMWA range model code: CMWAXX-Y(T) CMWA = Pump type. XX = Nominal flow rate m/3 per hour (3, 5, 7, 9 or 18). Y = Number of impellers. T = 3 phase or (blank) = single phase. CMWA3-2, CMWA3-3, CMWA3-4, CMWA3-5, CMWA3-6 & CMWA3-7. CMWA5-2, CMWA5-3, CMWA5-4, CMWA5-5, CMWA5-6 & CMWA5-7. CMWA7-2, CMWA7-3, CMWA7-4, CMWA7-5 & CMWA7-6. CMWA9-2, CMWA9-3, CMWA9-4 & CMWA9-5. CMWA3-2T, CMWA3-3T, CMWA3-4T, CMWA3-5T, CMWA3-6T & CMWA3-7T. CMWA5-2T, CMWA5-3T, CMWA5-4T, CMWA5-5T, CMWA5-6T & CMWA5-7T. CMWA7-2T, CMWA7-3T, CMWA7-4T, CMWA7-5T, CMWA7-6T & CMWA7-7T. CMWA9-2T, CMWA9-3T, CMWA9-4T & CMWA9-5T. CMWA18-2T, CMWA18-3T & CMWA18-4T.

Approval Holder:: Eautechnik GmbH

Company Name
Eautechnik GmbH
Country
Germany

View All Listings by this Company

WRAS Approval Number: #250304731

Range of shower booster pumps (either single or double) with acetal bodies and impellers and EPDM seals and NBR `O` rings. Supplied with stainless-steel braided EPDM lined flexible hoses incorporating isolation valves Maximum operating pressure 3.8 bar. Maximum operating temperature 65°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250304731
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15mm pushfit
Marking:: Bristan and product info on label
Installation Requirements:: R001 R415
Expiry date:: 31/03/2030
Model:: Maximum working pressure 3.8 bar: ST PUMP15TN / 232650 ST PUMP20TN / 232653 ST PUMP20SG / 232651

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

WRAS Approval Number: #250702722

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250702722
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: U3, U5, P3 or P5: 1” BSP (F) inlet x 1” BSP (F) outlet. U7 or P7: 1¼” BSP (F) inlet x 1” BSP (F) outlet. U9 or P9: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U18 or P18: 2” BSP (F) inlet x 1½” BSP (F) outlet.
Marking:: Ultra Models: Pentax logo and other technical data on data plate on body. Plus Models: Foras logo (brand of Pentax SpA) and other technical data on data plate on body
Installation Requirements:: R001 R415
Expiry date:: 31/07/2030
Proviso:: The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Model:: ULTRA range: U 3 – XX/Y, U 5 – XX/Y, U 7 – XX/Y, U 9 – XX/Y, U 3 – XX/Y T, U 5 – XX/Y T, U 7 – XX/Y T, U 9 – XX/Y T, U 18 – XX/Y T. PLUS range: P 3 – XX/Y, P 5 – XX/Y, P 7 – XX/Y, P 9 – XX/Y, P 3 – XX/Y T, P 5 – XX/Y T, P 7 – XX/Y T, P 9 – XX/Y T, P 18 – XX/Y T. Where: U or P = model type. U = ULTRA, P = PLUS. 3/5/7/9/18 = nominal flow rate in m³/h. XX = nominal power HPx100. U3 or P3 (single or three phase): 50-150. U5 or P5 (single or three phase): 70-200. U7 or P7 (single phase): 100-300. U7 or P7 (three phase): 100-350. U9 or P9 (single or three phase): 100-250. U18 or P18 (three phase only): 180-400. Y = Number of impellers. U3, U5, P3 or P5 (single or three phase): 2-7 stages. U7 or P7 (single phase): 2-6 stages. U7 or P7 (three phase): 2-7 stages. U9 or P9 (single or three phase): 2-5 stages. U18 or P18 (three phase only): 2-4 stages. Blank or T = motor: blank = single phase, T = 3 phase

Approval Holder:: PENTAX INDUSTRIES SpA

Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Country
Italy
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company
Manufacturer:: PENTAX INDUSTRIES SpA

Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Country
Italy
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company

WRAS Approval Number: #250312014

Range of shower handsets and overhead showers with plastic bodies incorporating EPDM ‘O’-rings and washers. The inlet of the overhead shower models can be supplied with either a washer or a combined washer and stainless-steel strainer. Maximum operating temperature 65°C.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 250312014
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: Open outlet use only.
Size:: Shower handsets: ½” BSP (M). Overhead showers: ½” BSP (F).
Marking:: Aqualisa on the handset body or overhead shower swivel joint.
Installation Requirements:: R001 R040
Expiry date:: 31/03/2030
Proviso:: Open outlet use only.
Model:: Chrome Shower handset: ACY1012 Chrome Overhead showers: 704120 704121 704119

Approval Holder:: Aqualisa Products Ltd.

Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

WRAS Approval Number: #250312013

A12231 & A12011 Ranges of shower handsets with plastic bodies (various finishes - see model) incorporating EPDM ‘O’-rings and washers. Maximum operating temperature 65°C.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 250312013
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: Open outlet use only.
Size:: Shower handsets: ½” BSP (M). Overhead showers: ½” BSP (F).
Marking:: Bristan on body.
Installation Requirements:: R001 R040
Expiry date:: 31/03/2030
Proviso:: Open outlet use only.
Model:: Shower handsets: A12231 C A12231 BLK A12231 BB A12231 GM A12011 C A12011 BLK A12011 BB A12011 GM

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

WRAS Approval Number: #250312003

Range of shower handsets and overhead showers with plastic bodies (various finishes - see model) incorporating EPDM ‘O’-rings and washers. The inlet of the overhead shower models can be supplied with either a washer or a combined washer and stainless-steel strainer. Maximum operating temperature 65°C.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 250312003
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: Open outlet only
Marking:: Jelong, WRAS on handset body or connection.
Installation Requirements:: R001 R040
Expiry date:: 31/03/2030
Proviso:: Open outlet only
Model:: A12231* 3F hand shower A12232* 3F hand shower A12131* 3F hand shower A18311* 1F hand shower A12011* 1F hand shower A14431* 3F hand shower A14441* 4F hand shower A15241* 4F hand shower A15331* 3F hand shower B27811* 1F shower head B27012* 1F shower head B26111* 1F shower head B23111* 1F shower head B23011* 1F shower head B23251* 5F shower head For Hand shower * denotes: CH=CHROME PLATED BN=BRUSH NICKEL, GM=GUN METAL, G=GOLD, RG=ROSE GOLD For Shower head * denotes: CH=CHROME PLATED MB=MATT BLACK, W= WHITE, BN=BRUSH NICKEL, ORB=OIL RUBBED BRONZE， GM=GUN METAL, G=GOLD, RG=ROSE GOLD

Approval Holder:: Xiamen Jelong Plumbing Co.,Ltd

Company Name
Xiamen Jelong Plumbing Co.,Ltd
Address
Unit 402, No. 598 Guankou South Road Jimei District Xiamen
Country
China

View All Listings by this Company
Manufacturer:: Xiamen Jelong Plumbing Co.,Ltd

Company Name
Xiamen Jelong Plumbing Co.,Ltd
Address
Unit 402, No. 598 Guankou South Road Jimei District Xiamen
Country
China

View All Listings by this Company

WRAS Approval Number: #250312015

Shower handset with plastic body (various finishes) incorporating EPDM ‘O’-rings and washers. Maximum operating temperature 65°C.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 250312015
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: Open outlet only
Size:: 1/2" BSP (M)
Marking:: DEVA on handset body.
Installation Requirements:: R001 R040
Expiry date:: 31/03/2030
Proviso:: Open outlet only
Model:: HANM11

Approval Holder:: Methven UK Limited

Company Name
Methven UK Limited
Address
Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

WRAS Approval Number: #260202002

Range of interlocked EPDM lined shower hoses assemblies with EPDM gaskets. Maximum operating temperature: 85°C Open outlet use only.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 260202002
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: Kaiping Hualing logo, WRAS and Date of manufacture (YYYY) on ferrule
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: WS14-F001 - 1/2" BSP (F) WS14-F002 - 1/2" BSP (F) x M15 WS16-F001 - 1/2" BSP (F) Various finishes "Electrolysis, ROSE GOLD, Zirconium gold, Titanium gold, Brush PVD, PVD BLACK, Brush zirconium gold, MATTE BLACK, BRUSHED GUN GREY and Chromed"

Manufacturer:: Kaiping City Hualing Hoses Co Ltd

Company Name
Kaiping City Hualing Hoses Co Ltd
Address
No.18 East Road, Industrial Park Shuikou Town Kaiping City Guangdong Province
Country
CHINA

View All Listings by this Company