Miscellaneous Fittings

Section Code 1530 :

Back To Directory Sections

#250402042

Top entry compression cylinder flange with DZR brass body and copper anti-aeration dip tube. The compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 4.0 bar. Maximum operating temperature 60°C.

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1” BSP (F) cylinder connection, 28mm compression (or 22mm via an adaptor) vent connection and 22mm compression pump connection.
Marking:
S and CR on body. SALAMANDER PUMPS on compression nuts.
Installation Requirements:
R001
Expiry date:
30/04/2030
Model:
CSFLAN01: Salamander ‘S’ Flange.

Approval Holder:
Salamander Pumps
Company Name
Salamander Pumps
Postcode
SR5 3XE
Country
United Kingdom
Phone
0191 535 4528
General Email
lewisw@salamanderpumps.co.uk

View All Listings by this Company

Print This Approval


#250402049

Leak detection system, comprising of a flow sensor with a stainless-steel body incorporating a motorised spherical valve, with a stainless-steel ball. Please note that claims of leak detection have not been verified by WRAS. Maximum working pressure 15.0 bar. Maximum operating temperature 85°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
250402049
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M) inlet and outlet.
Marking:
HLP-4 on valve body.
Installation Requirements:
R001
Expiry date:
30/04/2030
Model:
9015-B.

Approval Holder:
Harrison Land & Property Ltd.
Company Name
Harrison Land & Property Ltd.
Address
11-12 Hallmark Trading Centre, Fourth Way, Wembley, Middlesex
Postcode
HA9 0LB.
Country
United Kingdom

View All Listings by this Company

Print This Approval


#250402709

Brass flow meter and smart box water monitoring system. Maximum working pressure 3.0 Bar Maximum operating temperature 65.0°C

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M)
Marking:
Showerkap Logo on case
Installation Requirements:
R001
Expiry date:
30/04/2030
Model:
Sentinel

Approval Holder:
Showerkap Ltd
Company Name
Showerkap Ltd
Address
Robins Green, Knob Hill, Warnham, West Sussex, RH12 3SN

View All Listings by this Company

Print This Approval


#250402710

Range of installation kits comprising of a water block, double check valve assembly (suitable for backflow protection against fluid category 3) and a pressure reducing valve (outlet pressure range 3.0 to 3.5 bar). Model 95428 incorporates a water filter. Maximum working pressure: 16 Bar Maximum operating temperature: 23°C

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
250402710
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see model
Marking:
Zip on water block, Zip, product info on filter
Installation Requirements:
R001 R008 R170 R290
Expiry date:
30/04/2030
Model:
95201: Chilled Install Rail (15mm spigot x ¾” BSP F) 95565: Install Rail (15mm spigot x ¾” BSP M) PRV – Art.232.991: Pressure Reducing Valve (3/4” (F) x ¾” BSP M)) 95428: Chilled InstaTap Installation Kit (15mm spigot x ¾” BSP F) 95402: InstaTap Installation Kit (15mm spigot x ¾” BSP F)

Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Country
United Kingdom
Phone
0345 600 5005
General Email
sebastian.ducker@zipwater.co.uk

View All Listings by this Company
Manufacturer:
Instanta Ltd
Company Name
Instanta Ltd
Address
Canning Road Southport Merseyside
Postcode
PR9 7SN
Phone
01704 501114
General Email

View All Listings by this Company

Print This Approval


#240902719

Ranges of sensor operated flow control devices either mains or battery powered, incorporating a normally closed solenoid valve to control the flow and operated via an infra-red sensor. The inlet incorporates a stainless-steel strainer. Maximum working pressure 8 Bar Maximum operating temperature 65°C

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
10mm Spigot inlet x 1/2" BSP (M) outlet
Marking:
"D" logo & Dolphin on sensor unit.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
DB6220-aaa-bb/DB6225-aaa-bb DB620-aaa-bb /DB625-aaa-bb DB6210-aaa-bb /DB6215-aaa-bb DB6240-aaa-bb /DB6245-aaa-bb DB6250-aaa-bb /DB6255-aaa-bb DB6280-aaa-bb /DB6285-aaa-bb ‘0’ models (DBxx[x]0-xxx-xx) are 9V mains powered. '5' models (DBxx[x]5-xxx-xx) are 9V battery powered. ‘aaa’ denotes the external surface finish. ‘bb’ denotes the external surface colour.

Approval Holder:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#241202713

Stainless steel pressure transducer. Maximum working pressure 20.0 Bar. Maximum operating temperature 50.0°C.

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Marking:
Applied Measurements labels attached to body
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
Pa6INF-20barsg-001.

Approval Holder:
SUEZ Advanced Solutions UK Ltd T/A Inflowmatix
Company Name
SUEZ Advanced Solutions UK Ltd T/A Inflowmatix
Address
1 Venture Road Southampton Science Park , Hampshire
Postcode
SO16 7NP
Country
United Kingdom
General Email
brian.head@inflowmatix.com

View All Listings by this Company

Print This Approval


#240902088

Range of ‘Tcontrols’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
RT – 1.1/4” BSP (M) to 2.1/4” BSP (M) RF – 48 mm OD
Marking:
"Tcontrols" logo, Model, Voltage, Size and other information on cap.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
Model Code: XXYZS Where XX denotes the boss type and can be replaced with any of the following: RT = Thread Type RF = Flange Type Where Y denotes the heating tube material and can be replaced with any of the following: 1 = Copper 2 = AISI 304 / AISI 304L 3 = AISI 321 4 = AISI 316 / AISI 316L 5 = Alloy 800 / Alloy 825 / Alloy 840 6 = Titanium 7 = AISI 309S 8 = AISI 310 Where Z denotes the brazing system and can be replaced with any of the following: A = Tin Alloy B = Silver Alloy C = Itek Brazing Where S denotes the surface enamelling and can be replaced with either of the following: S = Enamelled Blank = Not Enamelled

Approval Holder:
Thermowatt S.p.A.
Company Name
Thermowatt S.p.A.
Address
Via San Giovanni Battista 21 Arcevia
Postcode
60011
Country
Italy
Phone
+39 0731988246
General Email
thermowatt@legalmail.it

View All Listings by this Company

Print This Approval


#250404019

Plastic turbine for insertion into specifically dimensioned flow meters. Maximum operating temperature 85°C. Open outlet use only.

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
19.17mm
Marking:
T moulded on body
Installation Requirements:
R001 R008
Expiry date:
30/04/2030
Model:
Model "T"

Approval Holder:
Elbi International Spa
Company Name
Elbi International Spa
Address
Via Italia 54 10093 Collegno (TO) Italy

View All Listings by this Company

Print This Approval


#250502712

Electronically controlled advanced flow control pilot valve assembly with stainless steel body. Maximum working pressure 16.0 Bar Cold water use only.

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
M16 threaded connection (M)
Marking:
i20 Water Ltd and model code on adhesive label on body
Installation Requirements:
R001
Expiry date:
31/05/2030
Model:
AMPV0011

Manufacturer:
i20 Water Ltd
Company Name
i20 Water Ltd
Address
Unit 2, Vancouver Wharf, Hazel Road
Postcode
SO19 7BN

View All Listings by this Company

Print This Approval


#250502713

Range of flow restriction blocks with a stainless-steel body and integral stainless-steel filter. Maximum working pressure 16.0 Bar Cold water use only.

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/8” BSP M
Marking:
i20 Water Ltd and model number on adhesive label on body
Installation Requirements:
R001 R150
Expiry date:
31/05/2030
Model:
AMRB0002 AMRB0004

Manufacturer:
i2O Water Ltd
Company Name
i2O Water Ltd
Address
4 Benham Road Southampton Science Park Southampton
Postcode
SO16 7QJ
Country
Hampshire
Phone
02380 111 420

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 20 of 21

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.