Directory Search Results

Print List

#2012312

Range of spring loaded, resilient trim, in-line check valve cartridge, with plastic guides & jumper and NBR or EPDM seals within a plastic housing. For insertion in pipes and fittings with specifically sized bores. Maximum working pressure 16.0 bar. Model 31.4220.0. has a maximum operating temperature of 85°C. Model 31.0003.0 has a maximum operating temperature of 60°C.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
2012312
Size:
DN20
Marking:
Neoperl, flow arrow, WRAS and size on body.
Installation Requirements:
R001
Expiry date:
31/12/2025
Model:
OV20/DN20 (31.4220.0) & OV20/DN20-EPDM (31.0003.0)

Approval Holder:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

Print This Approval


#2012314

Range of spring loaded, resilient trim, in-line check valve cartridges, with plastic guides & plunger and EPDM or Silicone seals within a plastic housing. For insertion in pipes and fittings with specifically sized bores. Maximum working pressure 16.0 bar. Maximum operating temperature 60°C

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
2012314
Size:
DN10
Marking:
Neoperl, flow arrow, WRAS and size on body.
Installation Requirements:
R001
Expiry date:
31/12/2025
Model:
DW14/DN10-GF - 30.4033.0 DW14/DN10-GF-AF - 30.4031.0 DW14/DN10-PR – 30.4032.0 DW14/DN10-AF-PR – 30.4037.0
Product Images

Approval Holder:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

Print This Approval


#2012313

Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass body, compression models are nickle plated. A drain port is provided between the cartridges. Compression models are to be used with copper pipe to EN1057. Maximum working pressure 16.0 Bar. Maximum operating temperature for the D220W range 85°C. Maximum operating temperature of the D200CW range 60°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2012313
Size:
D220W – DN15, DN20, DN25, DN32, DN40, DN50. D220CW – 15mm, 22mm, 28mm compression.
Marking:
Crane, flow arrow, PN, DN and CR mould on body
Installation Requirements:
R001
Expiry date:
31/12/2025
Model:
D220W D220CW
Product Images

Approval Holder:
Crane Ltd
Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Country
United Kingdom
Phone
01473 277 364
General Email
enquiries@cranefs.com

View All Listings by this Company

Print This Approval


#2012075

‘Parker 500’ assisted bathing unit. Flow is controlled via a thermostatic mixing valve, the inlet of which incorporates a stainless steel strainer and single check valve cartridge (suitable for backflow protection against Fluid Category 2) and feeds either a bath spout outlet or shower handset which incorporates a self-closing trigger. The inlet to the shower handset incorporates a plastic flow restrictor and a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. There is a combined spherical valve and strainer on the inlet to the bathing unit which incorporates a single check valve cartridge (suitable for backflow protection against Fluid Category 2). The ‘shepherds crook’ type shower outlet is protected via an AUK3 airgap arrangement. Maximum working pressure 6.0 bar. Maximum operating temperature 80°C

Section:
0055 Baths
Section Subtitle:
Assisted Bathing Units
WRAS Approval Number:
2012075
Size:
¾” BSP (M) inlets
Marking:
Arjo on control panel. Model on side of bath.
Installation Requirements:
R001 R006
Expiry date:
31/12/2025
Model:
Parker 500

Approval Holder:
ArjoHuntleigh AB
Company Name
ArjoHuntleigh AB
Address
Hans Michelsensgatan 10 SE-211 20 Malmo

View All Listings by this Company
Manufacturer:
ArjoHuntleigh
Company Name
ArjoHuntleigh
Address
Cesta Simona Blatnika 11 3320 Velenje

View All Listings by this Company

Print This Approval


#2012030

ANP range of pre insulated one piece contact moulded GRP cold water storage cisterns and covers. Supplied with a wholesome water kit, consisting of a screened vent, screened warning pipe and screened overflow pipe. Cold water use only.

Section:
0120 Cisterns Storing Water for Domestic Purposes
Section Subtitle:
Drinking, washing, cooking and sanitary. Cisterns in this section comprise units, which, where detailed, include all the essential items identified in Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999. Where these items are not detailed in the directory entry, these will need to be included at point of installation, in order to fully comply with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
2012030
Size:
SEE MODEL
Marking:
Nicholson Plastics logo, model, capacity & product info on label on lid.
Installation Requirements:
R001 R270 R280
Expiry date:
31/12/2025
Model:
ANP-XX (XX denotes capacity). 37 – 12000 litres
Product Images

Approval Holder:
Nicholson Plastics Ltd.
Company Name
Nicholson Plastics Ltd.
Address
Riverside Road, Kirkfieldbank, Lanark
Postcode
ML11 9JS
Phone
+44 (0)1555 664316
General Email
sales@nicholsonplastics.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 189 of 2215

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.