Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #241002078

Nylon and stainless-steel braided EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 241002078
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to models.
Marking:: Hualing logo, WRAS and date of manufacture (YYYY) on ferrule
Installation Requirements:: R001
Expiry date:: 31/10/2029
Model:: HL-SS-XX-XX-XXX-XXX SS=Stainless Steel Braided Hose XX: Connection sizes: 01=F3/8 02=F1/2 03=F3/4 04=F15*1 05=M3/8 06=M1/2 07=M3/4 08=M15 09=M12 10=M10 11=M8 12=Pushfit 11mm ID or 11mm OD Note: Connection 01, 02, 04, 05, 06, 08, 09, 10, 11, 12 applicable for DN6. Connection 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12 applicable for DN8. Connection 01, 02, 03, 04, 05, 06, 07, 08 applicable for DN10. Connection 02, 03, 06, 07 applicable for DN14. 1st XXX: Hose inner size: 006= DN6, 008= DN8, 010= DN10, 014= DN14. 2nd XXX: Hose length: 15CM - 200CM. HL-N-XX-XX-XXX-XXX N=Nylon Pull out Hose. XX: Connection sizes: 01=F3/8 02=F1/2 08=M15 09=M12 10=M10 11=M8 12=Pushfit 11mm OD 1st XXX: Hose inner size: 006= DN6, 008= DN8. 2nd XXX: Hose length: 15CM - 200CM.

Approval Holder:: Kaiping City Hualing Hoses Co Ltd

Company Name
Kaiping City Hualing Hoses Co Ltd
Address
No. 42 Jinshan Road Shagang Industrial Park Shuikou Town
Country
Kaiping City

View All Listings by this Company
Manufacturer:: Kaiping City Hualing Hoses Co Ltd

Company Name
Kaiping City Hualing Hoses Co Ltd
Address
No. 42 Jinshan Road Shagang Industrial Park Shuikou Town
Country
Kaiping City

View All Listings by this Company

WRAS Approval Number: #240704037

Range of stainless steel braided hoses with EPDM liner and NBR or fibre gaskets. DN13 and DN19 Maximum working pressure 10 bar. Maximum operating temperature 65°C. DN25 Maximum working pressure 10 bar. Cold water use only.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 240704037
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: see model
Marking:: APL, Date of manufacture (YYYY) and WRAS stamped on ferrule.
Installation Requirements:: R001
Expiry date:: 31/07/2029
Model:: H786 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.5m H782 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.25m H783 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.0m H784 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.75m H785 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.5m H980 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.5m H979 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.25m H978 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.0m H977 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.75m H976 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.5m H775 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.5m H769 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.25m H772 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.0m H773 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.75m H774 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.5m H981 19mm stainless steel braided hose 3/4" F BENT x 3/4” F BENT 1.5m H829 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.25m H830 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.0m H831 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.75m H832 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.5m H984 25mm stainless steel braided hose 1” F STR x 1” F BENT 1.5m H767 25mm stainless steel braided hose 1” F STR x 1” F BENT 1.25m H833 25mm stainless steel braided hose 1” F STR x 1” F BENT 1.0m H768 25mm stainless steel braided hose 1” F STR x 1” F BENT 0.75m H989 25mm stainless steel braided hose 1” F BENT x 1” F BENT 1.5m H988 25mm stainless steel braided hose 1” F BENT x 1” F BENT 1.25m H987 25mm stainless steel braided hose 1” F BENT x 1” F BENT 1.0m H986 25mm stainless steel braided hose 1” F BENT x 1” F BENT

Product Images

Approval Holder:: Aquamatic Products Limited

Company Name
Aquamatic Products Limited
Address
3A & 3B Dakota Business Park, Dakota Way, Burscough, West Lancashire
Postcode
L40 8AF

View All Listings by this Company
Manufacturer:: Aquamatic Products Limited

Company Name
Aquamatic Products Limited
Address
3A & 3B Dakota Business Park, Dakota Way, Burscough, West Lancashire
Postcode
L40 8AF

View All Listings by this Company

WRAS Approval Number: #2211708

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. SCFA models incorporate a spherical valve. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2211708
Size:: see model
Marking:: South Coast Sales Logo, WRAS and date of manufacture YYYY on crimp connection.
Installation Requirements:: R001
Expiry date:: 30/11/2027
Model:: ½“ compression x ½" (F) BSP captive nut: EMBW130, length 30cm EMBW150, length 50cm - DN8 ¾“ compression x ¾" (F) BSP captive nut: EMBW530, length 30cm EMBW550, length 50cm - DN13

Approval Holder:: South Coast Sales

Company Name
South Coast Sales
Address
1 Doughcloyne Industrial Estate, Sarsfield Road, Wilton, Cork.
Postcode
T12 TR62
Country
Ireland
Phone
00353 21 - 43 46 143
General Email
info@southcoastsales.com

View All Listings by this Company

WRAS Approval Number: #2012117

Range of multi-layer shower hoses with a PVC inner hose, supplied with EPDM ‘O’-rings. Maximum operating temperature 60°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2012117
Marking:: DTC15, WRAS and date of manufacture (MM/YY) on captive nut.
Installation Requirements:: R001
Expiry date:: 31/12/2025
Model:: ½” BSP (F) conical or captive nut. D50010024 HOS1.5PVS07 HOS1.5PVS07BB HOS1.5PVS07BK HOS1.5PVS07BN HOS1.5PVS07GM HOSE2.0 HOS1.0PVS07 SHOWER HOSES

Approval Holder:: Methven UK Limited

Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

WRAS Approval Number: #240602065

Range of stainless steel or brass double interlocking, TPS lined flexible hose assemblies (various finishes) incorporating EPDM gaskets. Maximum operating temperature 60°C. Open Outlet Use Only

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 240602065
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model
Marking:: Dolphin logo on end connections
Installation Requirements:: R001
Expiry date:: 30/06/2029
Model:: Model Code: Dolphin Blue DB30abb.ccc.d.eee a’ indentifies the material type of the metal interlocked hose and threaded end connectors; these codes can be: o DB303bb. for brass material o DB304bb. for stainless steel material  ‘bb’ identifies the type of fitting/threaded connector at either end of the hose ranging from DB30a1. to DB30a11. Can be either one or two digits.  ‘ccc’ identifies the length range of the metal interlocked hose from 500mm ‘DB30abb.050’ to 2000mm ‘DB30abb.200’  ‘d’ identifies the external finish to the metal parts from ‘DB30abb.ccc.1 to DB30ab.ccc.9’: o ‘.1’ denotes brushed/satin polished o ‘.2’ denotes mirror polished o ‘.3’ denotes brushed/satin polished with PVD coating o ‘.4’ denotes mirror polished with PVD coating o ‘.5’ denotes powder coated o ‘.6 - .9’ to denote other material and finish options that may be available in the future  ‘eee’ indicates the colour of PVD or powder coat that has been applied from ‘DB30abb.ccc.d.00’ to ‘DB30abb.ccc.d.999’. Can be either two or three digits.

Product Images

Approval Holder:: Dolphin Solutions Limited

Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

WRAS Approval Number: #240602069

Range of stainless steel or brass double interlocking, TPS lined flexible hose assemblies (various finishes) incorporating EPDM gaskets. Maximum operating temperature 60°C. Open Outlet Use Only

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 240602069
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model
Marking:: SHS on end connections.
Installation Requirements:: R001
Expiry date:: 30/06/2029
Model:: V165W-XX 1/2" Female Connection D17, V940W-XX 1/2" Female Connection D17, V941W-XX 1/2" Female Connection D17, V942W-XX 1/2" Female Connection D17. FXF2CX Trade Name Explanation: FX = Double interlock hose in brass or stainless steel F = TPS Inner Tube 2: Brass Rubber Holders C: WRAS Approved X: Connection Combinations, where X can be replaced with any of the following: A = ½” BSP (F) x ½” BSP (F) B = ½” BSP (F) x M15x1 F = ½” BSP (F) x 3/8” BSP (M) H = ½” BSP (F) x 3/8” BSP (F) I = M15x1 x M15x1 L = M15x1 x 3/8” BSP (M) M = M15x1 x 3/8” BSP (F) Q = 3/8” BSP (M) x 3/8” BSP (M) R = 3/8” BSP (M) x 3/8” BSP (F) S = 3/8” BSP (F) x 3/8” BSP (F) T = ½” BSP (F) x M12x1 AABBCCCC.DDD Trade Name Explanation: AA: identifies hose raw material and diameter, which can be replaced with any of the following: AC = Brass CW508L 022 External diameter 14 AD = Brass CW508L 026 External diameter 14 AQ = Brass CW508L 022 External diameter 15 AR = Brass CW508L 026 External diameter 15 AV = Brass CW508L 022 External diameter 17 AW = Brass CW508L 026 External diameter 17 AF = INOX AISI 304 External diameter 14 AS = INOX AISI 304 External diameter 15 AX = INOX AISI 304 External diameter 17 AJ = Brass CW 508L 022 External diameter 12 BB: identifies the type of external finish, and can be replaced with any of the following: CR = Chromed CZ = Brushed Chrome GM = Raw Brass NS = Brushed Nickel NZ = Brushed Nickel Phosphor IG = Raw INOX IS = Brushed INOX PO = PVD Gold PA = PVD Gold Brushed PG = PVD Black Metal PB = PVD Black Metal Brushed PH = PVD Champagne Brushed PR = PVD Copper Bronze PE = PVD Copper Bronze Brushed PI = PVD Grey 07 Brushed PK = PVD High Brass PQ = PVD High Brass Brushed PM = PVD Pale Gold Brushed PC = PVD Rose Gold Family Surface finishes: Raw, Chromed, Electropolished, Polished, Various Galvanics Finishing, Various PVD Finishing, Various Paint Finishing. CCCC: identifies the type of fittings, which can be replaced with any of the following: Any combination of (2) alphanumeric characters denoting only external aesthetic fittings dimensions. All of fittings are unwetted. DDD: identifies the length (between 50 and 200cm), and can be replaced with any of the following as examples: 050 = 50cm length, 100 = 100cm length, 150 = 150cm length, 200 = 200cm length.

Approval Holder:: Samuel Heath & Sons Plc

Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

WRAS Approval Number: #240602047

Range of air venting valves with a stainless-steel bodies and springs, plastic float and EPDM ‘O’-rings. Maximum working pressure 25.0 Bar. Maximum operating temperature 80.0°C.

Section:: 1980 Valves
Section Subtitle:: Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:: 240602047
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: CLA-VAL logo, DN, PFA, serial number and model number on data plate
Installation Requirements:: R001
Expiry date:: 30/06/2029
Model:: VENT-A-RISER AQUA B70-526 DN25 - 1” BSP (M), AQUA 70-516 DN50 - 2” BSP (M), AQUA 70-516 DN80 - flanged, AQUA 70-516 DN100 - flanged, AQUA 70-516 DN150 - flanged, AQUA 70-516 DN200 - flanged.

Product Images

Approval Holder:: Cla-Val UK Ltd.

Company Name
Cla-Val UK Ltd.
Address
Dainton House 107 Goods Station Road Tunbridge Wells
Postcode
TN1 2DR
Country
United Kingdom
Phone
01892 514400
General Email
liam.kent@cla-val.co.uk

View All Listings by this Company

WRAS Approval Number: #241204001

Range of air release valves with plastic bodies, EPDM ‘O’ rings and polypropylene floats. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 1980 Valves
Section Subtitle:: Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:: 241204001
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: see model
Marking:: Bermad on body. Size, model, PN, DN, date of manufacture (MM/YYYY) on adhesive label on body.
Installation Requirements:: R001 R535
Expiry date:: 31/12/2029
Model:: A30-3/4”: ¾” BSP (M). A30-1”: 1” BSP (M). C30-3/4”: ¾” BSP (M). C30-1”: 1” BSP (M). C30-2”: 2” BSP (M).

Approval Holder:: Bermad CS Ltd

Company Name
Bermad CS Ltd
Address
Kibbutz Evron 2280800, Israel

View All Listings by this Company
Manufacturer:: Bermad CS Ltd

Company Name
Bermad CS Ltd
Address
Kibbutz Evron 2280800, Israel

View All Listings by this Company

WRAS Approval Number: #240504023

Range of automatic air venting valves with plastic bodies and EPDM ‘O’-rings. Maximum working pressure 6.0 bar. Maximum operating temperature 99°C.

Section:: 1980 Valves
Section Subtitle:: Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:: 240504023
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: Caleffi logo moulded on cap.
Installation Requirements:: R001 R200
Expiry date:: 31/05/2029
Model:: 49513: 20.9mm pushfit manifold, C502433 CST: ⅜” BSP (M), C502600 CST: 19.9mm pushfit manifold, C502601 CST: 20.9mm pushfit manifold, C502604 PLY: 17.7mm pushfit manifold, C502630 CST: ⅜” BSP (M), C502631 CST: ⅜” BSP (M), C502633 CST: ⅜” BSP (M), C502640 CST: ½” BSP (M), C502644 CST: ½” BSP (M), C502634 CST: ⅜” BSP (M).

Product Images

Approval Holder:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

WRAS Approval Number: #2301096

Range of air release valves with blue epoxy coated ductile iron bodies and EPDM seats. Maximum working pressure 16.0 bar

Non-metallic materials and components comply with BS6920 at 80°C

Section:: 1980 Valves
Section Subtitle:: Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:: 2301096
Size:: DN50, DN80, DN100, DN150, DN200, DN300 flanged.
Marking:: AFC) Suzhou Alpine Flow Control Co., Ltd Logo, DN, PN and other technical Info on body.
Installation Requirements:: R001 R120
Expiry date:: 31/01/2028
Model:: KARX series

Approval Holder:: AFC Valves Malaysia SDN BHD

Company Name
AFC Valves Malaysia SDN BHD
Address
26 Jalan Sungai Jeluh
Postcode
shah Alam

View All Listings by this Company