Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Models with compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

250404006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN8 bore diameter hose with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 20= M10*(12‐110) with single O‐ring or double O-ring 21= M11*(12‐110) with single O‐ring or double O-ring 22= M12*(12‐110) with single O‐ring or double O-ring 23= M14*(12‐110) with single O‐ring or double O-ring 24= M15*(12‐110) with single O‐ring or double O-ring 25= M16*(12‐110) with single O‐ring or double O-ring 26= F15 27= 15mm smooth tube 31= 15mm compression fitting 35= 10mm pushfit 38= 22mm pushfit 39= 10mm pushfit isolation valve 41= 15mm pushfit isolation valve 42= 22mm pushfit isolation valve DN10 bore diameter hose with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 16= F1 17= F1 elbow 18= M1 20= M10*(12‐110) with single O‐ring or double O-ring 21= M11*(12‐110) with single O‐ring or double O-ring 22= M12*(12‐110) with single O‐ring or double O-ring 23= M14*(12‐110) with single O‐ring or double O-ring 24= M15*(12‐110) with single O‐ring or double O-ring 25= M16*(12‐110) with single O‐ring or double O-ring 27= 15mm smooth tube 28= 22mm smooth tube 31= 15mm compression fitting 35= 10mm pushfit 38= 22mm pushfit 39= 10mm pushfit isolation valve 41= 15mm pushfit isolation valve 42= 22mm pushfit isolation valve DN13 bore diameter hose with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 16= F1 17= F1 elbow 18= M1 24= M15*(12‐110) with single O‐ring or double O-ring 25= M16*(12‐110) with single O‐ring or double O-ring 27= 15mm smooth tube 28= 22mm smooth tube 31= 15mm compression fitting 38= 22mm pushfit 41= 15mm pushfit isolation valve 42= 22mm pushfit isolation valve DN19 bore diameter hose with the following end connections: 13= F3/4 14= F3/4 elbow 15= M3/4 16= F1 17= F1 elbow 18= M1 28= 22mm smooth tube 38= 22mm pushfit 42= 22mm pushfit isolation valve Sizes added July 2025: DN8 09= F1/2 10= F1/2 wing nut 29= 10mm compression fitting 30= 12mm compression fitting 32= 22mm compression fitting 33= 15mm isolation valve 34= 22mm isolation valve 36= 12mm pushfit 37= 15mm pushfit 40= 12mm pushfit isolation valve DN10 09= F1/2 10= F1/2 wing nut 30= 12mm compression fitting 32= 22mm compression fitting 33= 15mm isolation valve 34= 22mm isolation valve 36= 12mm pushfit 37= 15mm pushfit 40= 12mm pushfit isolation valve DN13 09= F1/2 10= F1/2 wing nut 32= 22mm compression fitting 33= 15mm isolation valve 34= 22mm isolation valve 37= 15mm pushfit Dn19 32 = 22mm Compression fitting 34 = 22mm isolation valve

Marking:

Justlink, WRAS, ‘it’ and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

JL – A*B – XX – D – Eit – XXX A*B denotes connection size and type and is replaced with a two digit number (please refer to size). XX denotes bore diameter of hose and is replaced with a two digit number (please refer to size). D denotes the outer braided material and is replaced with: SS = stainless steel wire, SN = stainless steel wire plus black nylon wire, N = Nylon wire. E denotes the liner material and is replaced with 1 for EPDM. XXX denotes the length of the hose between 15cm & 200cm and is replaced with a number.

Product Images

Approval Holder:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103354

Size:

DN8 (denoted by 08) bore diameter available with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter available with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter available with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring

Marking:

GENEBRE, date of manufacture (MMYY) GENEBRE label on the product.

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

GEFLEX A*B XX D E XXX A*B denotes connection size and type and is replaced with a two digit number (please refer to size). XX denotes bore diameter of hose and is replaced with a two digit number (please refer to size). D denotes the outer braided material and is replaced with: SS = stainless steel wire, SN = stainless steel wire plus black nylon wire N = Nylon wire. E denotes the liner material and is replaced with 0 for EPDM. XXX denotes the length of the hose (15cm to 200cm) and is replaced with a number.

Approval Holder:

Genebre, S.A

Company Name

Genebre, S.A

Address

Avinguda Joan Carles I, 46 – 48, Edificio GENEBRE Hospitalet de Llobregat

Postcode

08908

Country

Spain

Phone

(+34) 93 298 80 00

General Email

cazorla@genebre.es

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Shower valve(s) with thermostatic temperature control

Wall mounted. Supplied with riser rail. Inlets incorporate approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R020

Expiry date:

31/05/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control

Wall Mounted Concealed. Inlets incorporate approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R020

Expiry date:

30/06/2030

Notes & Further Information

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control

Model OP TS3650TO ELC - Wall mounted concealed. Wall Mounted Exposed - All other Models Inlets incorporate servicing valves and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R020

Expiry date:

31/05/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company