Directory Search Results

Print List

#2303083

Ionisation system with stainless steel body and copper & silver electrodes. Maximum working pressure 12.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
2415 Water conditioners - Disinfectant ion generators
Size:
2” BSP (F) or DN100 Flanged
Marking:
Hydrotec, model & serial number on adhesive label on body.
Installation Requirements:
R001 R120 R150 R170 R290
Expiry date:
31/03/2028
Model:
Apollo LC1K Apollo LC8K Apollo LC16K

Approval Holder:
Hydrotec International Water Treatment Limited
Company Name
Hydrotec International Water Treatment Limited
Address
38 Main Street Swords Country Dublin
Country
Ireland

View All Listings by this Company

Print This Approval


#250102705

Water chiller and heater units for under counter installation incorporating an approved double check valve at the inlet, to be used in conjunction with an outlet tap arrangement or flow control device, with a range of taps that are supplied with the chillers. Maximum working pressure 10.0 Bar Maximum operating temperature 98.0°C

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
250102705
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Billi on tap body. Billi, Model number, Model name and other technical information on adhesive labels on unit body.
Installation Requirements:
R001 R006
Expiry date:
31/01/2030
Model:
Alpine Family, Cold and Ambient Water units 932060, 932120, 932125, 913000 Quadra Family 904010, 904020, 904025, 904040, 904060, 904065, 904100, 904105, 904107, 904180, 904187 X-series taps (XL- levered dispenser, XT -touch dispenser, XR-remote dispenser) XL ( 852150), XT ( 852153), XR (852156) Mixer Taps 991200, 991300, 991400, 991500, 991600, 991700, 991900
Product Images

Manufacturer:
Billi Australia Proprietary Ltd
Company Name
Billi Australia Proprietary Ltd
Address
42 Lucknow Crescent, Thomastown, Victoria 3074
Country
Australia

View All Listings by this Company

Print This Approval


#250102720

Continuous soft water, ion exchange, hydraulically driven water softener (salt regenerated) for domestic use, incorporating LLDPE tubing. Operation is by an ion exchange resin filed plastic pressure vessel, with integral salt cabinet and timer/manual regeneration control. The appliance incorporates single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature Cold water only.

Section:
2450 Water softeners
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M).
Marking:
HARVEY on body. Harvey's water softener, Max pressure and other information on adhesive label on assembly.
Installation Requirements:
R001 R008 R120 R150 R170 R290 R415
Expiry date:
31/01/2030
Model:
H20B H20C
Product Images

Manufacturer:
Harvey Water Softeners
Company Name
Harvey Water Softeners
Address
Hipley Street Old Woking Surrey
Postcode
GU22 9LQ
Country
United Kingdom
Phone
01483 753430

View All Listings by this Company

Print This Approval


#241104712

Range of inline water meter kits incorporating brass bodies, a spherical valve and drain off valve. For use with copper pipe (manufactured to BS EN 1057:1996). Maximum working pressure 10.0 bar. Cold water use only.

Section:
4001 Components and accessories
Section Subtitle:
Water meters.
WRAS Approval Number:
241104712
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm & 22mm crimped connections. 15mm & 22 compression.
Marking:
BZUK on body
Installation Requirements:
R001 R110 R511
Expiry date:
30/11/2029
Model:
BZMKC15(VE) 15mm Inline Meter Kit Compression. BZMKC22(VE) 20mm Inline Meter Kit Compression. BZMKP15(VE) 15mm Inline Meter Kit Crimp. BZMKP22(VE) 20mm Inline Meter Kit Crimp.
Product Images

Approval Holder:
Bayzone Holdings Pty Ltd
Company Name
Bayzone Holdings Pty Ltd
Address

View All Listings by this Company

Print This Approval


#241104717

Range of inline water meter kits incorporating brass bodies, a spherical valve and drain off valve. For use with copper pipe (manufactured to BS EN 1057:1996). Maximum working pressure 10.0 bar. Cold water use only.

Section:
4001 Components and accessories
Section Subtitle:
Water meters.
WRAS Approval Number:
241104717
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm & 22mm crimped connections. 15mm & 22 compression.
Marking:
EBCO on body
Installation Requirements:
R001 R110 R511
Expiry date:
30/11/2029
Model:
1982-015015-10-011 15mm Inline Meter Kit Compression. 1982-022022-10-011 20mm Inline Meter Kit Compression. 1982-015015-10-066 15mm Inline Meter Kit Crimp. 1982-022022-10-066 20mm Inline Meter Kit Crimp.

Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 181 of 198

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.