Directory Search Results

Print List

#2308543

'TamAcryl 2000 Orange or Blue with corrosion inhibitor', orange coloured or blue coloured (once mixed), site applied acrylic grouts. Mix Part A (orange or blue) with 2% accelerator and then mix with Part B (colourless) in a 1:1 volume ratio. Apply as per manufacturer’s TDS 'V1UK20 – 2020.10.22'. Cure for 12 hours at 16°C. For use with water up to 23°C. This material is only approved for the mixing & curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval. These materials are for use in concrete reservoirs and similar structures, constructed in accordance with the design criteria of BS EN 1992-3:2006 (Design of concrete structures – Liquid retraining and containing structures) with respect to normal frequency of joints. The material has been tested at a reduced surface area to volume ratio of 1000mm² per litre.

Section:
5505 Sealants - Flat Faced Joints
Section Subtitle:
Waterstops. These materials are for use in concrete reservoirs and similar structures, constructed in accordance with the design criteria of BS EN 1992 with respect to normal frequency of joints. The materials have been tested at a reduced surface area to volume ratio of 1000mm² per litre as specified in BS 6920: Part 1.
WRAS Approval Number:
2308543
Expiry date:
31/08/2028

Approval Holder:
Normet UK Ltd.
Company Name
Normet UK Ltd.
Address
Unit 9 Wheeler Road, Seven Stars Industrial Estate, Coventry
Postcode
CV3 4LA

View All Listings by this Company

Print This Approval


#2012501

'Griffon WDF-05'. Site applied, blue coloured solvent cement. Apply as per manufacturer's instructions '6311380 20200708'. Cure for 30 minutes@12°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5560 Solvent Cements
Expiry date:
31/12/2025

Approval Holder:
Bison International
Company Name
Bison International
Address
PO Box 160 NL 4460 A D Goes Netherlands

View All Listings by this Company

Print This Approval


#240502707

Range of spring loaded resilient trim check valve cartridges with a plastic body and EPDM ‘O’-rings. For insertion into specifically dimensioned bores Maximum working pressure 10 Bar Maximum operating temperature 85°C

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
240502707
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model
Marking:
Korie, size and flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/05/2029
Model:
Korie DN12, DN12200000 Korie DN14, DN14200000 Korie DN20, DN20200000
Product Images

Approval Holder:
Yuhuan Korie Plastic Factory
Company Name
Yuhuan Korie Plastic Factory
Address
Technology Industry Functional Area, Chumen Village Yuhuan
Country
Zhejiang

View All Listings by this Company
Manufacturer:
Yuhuan Korie Plastic Factory
Company Name
Yuhuan Korie Plastic Factory
Address
Technology Industry Functional Area, Chumen Village Yuhuan
Country
Zhejiang

View All Listings by this Company

Print This Approval


#250402705

Range of spring loaded resilient trim check valve cartridges with plastic bodies. For insertion into fittings with specifically sized bores. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
250402705
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN13 – DN25
Marking:
Korie, size and flow arrow on body
Installation Requirements:
R001
Expiry date:
30/04/2030
Model:
KORIE DN13, DN13200000 – DN13 KORIE DN15, DN15200000 – DN15 KORIE OV15, OV15200000 – DN15 KORIE OV20, OV20200000 – DN20 KORIE OV25, OV25200000 – DN25

Manufacturer:
Yuhuan Korie Plastics Co., Ltd.
Company Name
Yuhuan Korie Plastics Co., Ltd.
Address
Technology Industry Functional Area, Chumen Village, Yuhuan, Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#2311336

Range of tundishes incorporating a black or grey plastic body or mild steel painted black body (128-2001 CST, 128-2003 CST, 128-2004 CST & 128-2005 CST models only). Maximum operating temperature 85°C.

Section:
0046 Backflow Prevention Devices
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2311336
Size:
See model
Marking:
Altecnic and product info on body. Some models are also marked with the date of manufacture. The code (if present) indicates the date of manufacture as follows: I – 2019, J – 2020, K – 2021, L – 2022, M – 2023, N - 2024. Followed by A - Jan, Feb, March, B - Apr, May, June, C - July, Aug, Sept, D - Oct, Nov, Dec e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec) of 2019.
Installation Requirements:
R001
Expiry date:
30/11/2028
Model:
128-2001 CST 1F x 1 ¼”F Straight Tundish (black), 128-2003 CST 1 ½”F x 2”F Straight Tundish (black), 128-2004 CST 2”F x 2 ½”F Straight Tundish (black), 128-2005 CST 2 ½”F x 3”F Straight Tundish (black), 128-4001 CST 15mm x 22mm Straight Tundish (black), 128-4002 CST 15mm x 22mm Straight Tundish (black), 128-4003 CST 15mm x 22mm Straight Tundish (black bottom and clear top), 128-4004 CST 22mm x 28mm Straight Tundish (grey), AL-400010 15mm x 22mm Straight Tundish (black), AP-400010 15mm x 22mm Straight Tundish (black), AP-400012 15mm x 22mm Straight Tundish (black), G-128-2201 CST ½” M x ¾” M Angled Tundish (black), G-128-2010 CST 15mm x 22mm Straight Dry Trap Tundish (black), Model added May 2024: AP-400011 22mm x 28mm Straight Tundish (black). Model added September 2024: 128-2002CST 1 ¼” BSP(F) x 1 ½”BSP(F)
Product Images

Approval Holder:
Altecnic Limited
Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company
Manufacturer:
Altecnic Limited
Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 19 of 31

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.